1. 547 grams of hydrated mgso4 is heated in a crucible. After heating, 0. 7554 grams of anhydrous mgso4 remains in the crucible. How many waters of hydration were attached to the mgso4?.

From the law of the conservation of mass, we can see that the mass of the products in the system is 28 g.

The law of conservation of mass states that the mass of the system before the reaction ought to be the same as the mass of the system after reaction. Seeing that we have  28g of reactants is completed in a closed system (all of the reactants are used up and none of the products escape), we now now need to determine the mass of the products.

If we consider the law of conservation of mass, then we must have to agree that the mass of the product would be 28 g.

Learn more about conservation of mass:https://brainly.com/question/13383562

#SPJ1

The total concentration (or molarity) of nitrate ions in the mixed solution will be 2 M (2 mol/L).

The nitrate ion in the final solution will originate from both nitric acid and magnesium nitrate. To find the final molarity, it is easiest to find the number of moles originating from nitric acid, then do the same for magnesium nitrate, add those moles together, and divide them by the total volume.

Because 1 mol of nitric acid generates 1 mol of nitrate ions, the amount of nitrate ions will be equal to the amount of nitric acid.

c = n/V ⇒ n = V*c = 0.100 L * 0.200 M = 0.02 mol

On the other hand, 1 mol of magnesium nitrate generates 2 moles of nitrate ions, so the amount of nitrate ions will be double the amount of magnesium nitrate.

n = V*c = 0.200 L * 0.100 M = 0.02 mol of magnesium nitrate ⇒ 0.04 mol of nitrate ions

total amount = 0.02 mol + 0.04 mol = 0.06 mol

total volume = 0.100 L + 0.02 L = 0.03 L

c = n/V = 0.06 mol / 0.03 L = 2 M

You can learn more about molarity here:
brainly.com/question/16727614

#SPJ4

directly, volumes

At a fixed temperature and pressure, the volume occupied by a gas is directly proportional to the number of moles of gas present. For ideal gases under these conditions, equal volumes of gas contain equal numbers of particles or moles.

The physical behavior of a sample of gas can be described completely by the four variables, pressure (P), volume (V), temperature (T) and quantity (moles). These variables are interdependent. Any one of them can be determined by knowing the other three.

The volume occupied by a mole of gas at STP ( same temperature and pressure) is called the standard molar volume and is very nearly a constant for gases.

Learn more about the laws of gas here:

https://brainly.com/question/10511054

Bumping is the sudden and uncontrolled boiling of liquid.

Bumping is a word used in chemistry to describe the situation where homogeneous liquids boiled in a test tube or other container will superheat and, upon nucleation, rapid boiling will expel the liquid from the container. This happens when liquids are heated up beyond their boiling points and it causes them to burst out of their containers.

Learn more on Boiling liquids from:

https://brainly.com/question/14620648?referrer=searchResults

#SPJ4

The number of moles SO₂ that are present in 100g of SO₂ 1.56 moles.

The moles of a substance is related to the mass of the substance  and the molar mass as follows:

the molar mass of a substance is the mass of 1 mole of the substance.

Molar mass of SO₂ = 32 + 16 * 2

Molar mass of SO₂ = 64

mass of SO₂ in the sample = 100 g

moles of SO₂ = 100 / 64

moles of SO₂ =  1.56 moles

Learn more about moles and molar mass at: https://brainly.com/question/21334167

#SPJ1

When attractive forces between molecules are strong in a liquid, the liquid can be described as solid.

To learn more about attractive forces, refer

https://brainly.com/question/19534658

#SPJ13

If you gently shake a separatory funnel containing a carboxylic acid with chloroform and aq NaHCO3, the organic acid will be found in the top layer and the aqueous layer.

Here's the complete question:

If you gently shake a separatory funnel containing a carboxylic acid with chloroform and aq NaHCO3, the organic acid will be found where? (Multiple answers possible)

a) The top layer b) The bottom layer. c) The organic layer. d)The aqueous layer. e) As an insoluble solid.

Generally, Acid-base extractions are used in extracting Carboxylic acids from the organic layer to the aqueous and top layer by shaking them with a basic solution.

Learn more on Acid base extraction from:

https://brainly.com/question/14606183?referrer=searchResults

#SPJ4

Using NAD and NADH reaction for the oxidation of methanol CH₃OH to formaldehyde, in which NAD is the oxidizing agent and then alcohol oxidase was crystallized after purification by ammonium sulfate precipitation

Oxidation means a process in which a chemical substance changes because of the addition of oxygen

Methanol was oxidized to formaldehyde by an alcohol oxidase and the reaction are

CH₃OH+O₂ → HCOH + H₂O₂

And the cofactor found in two form of cell and NAD is an oxidizing agent and it accept the electron of other molecule and reduced and this reaction is also with H⁺ form NADH which can be used as the reducing agent to donate electron and this reaction gives alcohol oxidase was crystallized after purification by ammonium sulfate precipitation

Know more about oxidation

https://brainly.com/question/20389059

#SPJ1

Answer:

the answer base on my test is H3O4P1

The mean of the data is 4.

The formula of the mean is

Sum of all the observation÷ Total number of observations

So, According to the formula :

Sum of all the observations= 4+1+3+9+6+3+2+4 = 32

The number of observations is 8

So,

32÷8

= 4

Hence, the mean of the data is 4.

To know more about Mean please refer to this link:

https://brainly.com/question/22871228?utm_source=android&utm_medium=share&utm_campaign=question

Answer:

1. Protons: located in the nucleus, positive charge, mass is 1 amu

2. Neutron: located in nucleus, neutral charge, mass is 1 amu

3. Electron: located in the 3 dimensional space around the nucleus, negative charge, nearly massless when compared to protons and neutrons

Explanation:

The outcome won't be exact. Any liquid, including basic and acidic liquids, could contaminate it.

To determine the precise concentration of a solution whose concentration is unknown, a NaOH solution must be standardized. To obtain an equivalence point and determine the unknown concentration, standardization involves titrating a known volume of NaOH with an acid in a flask.

To determine the precise concentration, you will standardize a NaOH solution in this experiment. You will use standardized NaOH to calculate the concentrations of HCl and HC2H3O2 solutions in subsequent experiments. You'll discover various indicators for endpoint detection.

To know more about titration :

https://brainly.com/question/2728613

#SPJ9

Long-term memory formation is a highly dynamic process involving multiple temporal and functional stages including encoding consolidation retrieval storage and reconsolidation.

Scientists believe that smell and memory are so closely linked because the anatomy of the brain allows smell signals to travel to the limbic system so quickly. Experts say that memories associated with smells tend to be older and less thought-provoking, which means the memories are very vivid.

Smells are processed by the olfactory bulb a structure at the front of the brain that sends information to other areas of the body's central command center for further processing. Scents reach directly into the limbic system, which includes the amygdala and hippocampus regions associated with emotion and memory.

Learn more about Memory here:-https://brainly.com/question/25040884

#SPJ1

The no. of moles of the gas sample are present at the end is 0.486 moles

The ideal gas law is :

PV = nRT

here,

P is pressure = 4.00 atm

T is temperature = 21.7 °C = 294.7 K

n is moles = 1.90 moles

R is gas constant

V = n RT / P

   = (1.90 × 0.082 × 294.7) / 4

  = 11.47 L

Now when temperature is  302.1 K , pressure is 1.05 atm and volume is 11.47 L then the moles will be :

PV = n RT

n = PV / RT

  = ( 1.05 × 11.47 ) /( 0.082 × 302.1 )

  = 12.04 / 24.77

  = 0.486 moles

Thus , A glass container was initially charged with 1.90 moles of a gas sample at 4.00 atm and 21.7 °C. some of the gas was released as the temperature was increased to 29.1 °C, so the final pressure in the container was reduced to 1.05 atm . the no. of moles of the gas sample are present at the end is 0.486 moles

To learn more about ideal gas law here

https://brainly.com/question/13821925

#SPJ1

Answer:

2031 g or 2.03 kg

Explanation:

1 mole of Na = 22.990 g = 6.022 x 10^23 atoms

so the mass of 5.32 x 10^25 atoms of Na equals

(22.990)(5.32 x 10^25)/(6.022 x 10^23)

= 2030.99966788 g = 2031 g or 2.03 kg

if, at a given temperature, the equilibrium constant for the reaction

H₂  +  Cl₂    ---->  2HCl   is Kp, then the equilibrium constant for the reaction : 2HCl ---->  H₂  +  Cl₂ is 1 / Kp.

the equilibrium constant for the reaction

H₂  +  Cl₂    ---->  2HCl        is Kp,

when we reverse the equation  the equilibrium constant becomes reciprocal of original reaction . so the reaction is given as:

2HCl ---->  H₂  +  Cl₂

this is the reverse reaction of the original reaction ,so the equilibrium constant becomes the reciprocal of the original reaction.

so, the equilibrium constant K'p = 1/ Kp

Thus, if, at a given temperature, the equilibrium constant for the reaction

H₂  +  Cl₂    ---->  2HCl   is Kp, then the equilibrium constant for the reaction : 2HCl ---->  H₂  +  Cl₂ is 1 / Kp.

To learn more about equilibrium constant here

https://brainly.com/question/2009610

#SPJ1

Fe2+ requires 2 Faraday / mol Fe (s) or 1 Faraday → 1/ 2 mol Fe(s) Fe3+ require 3 Faraday / mol Fe (s) or 1 Faraday → 1/3 mol Fe (s) for equal numbers of Faraday (1/2 : 1/3 as 1.5 : 1) (Or inverse relationship is clear) no 2nd point unless flow of e¯ to mass (moles) is clear and logically correct

The faraday is a dimensionless measure of the amount of electric charge, or roughly 6.02 × 10²³ electric charge carriers. This exists even referred to as Avogadro's constant and is equivalent to one mole. The coulomb (C) is the most popular unit for measuring the amount of electric charge in the International System of Units (SI).

Fe2+ requires 2 Faraday / mol Fe (s) or 1 Faraday → 1/ 2 mol Fe(s) Fe3+ require 3 Faraday / mol Fe (s) or 1 Faraday → 1/3 mol Fe (s) for equal numbers of Faraday (1/2 : 1/3 as 1.5 : 1) (Or inverse relationship is clear) no 2nd point unless flow of e¯ to mass (moles) is clear and logically correct

To learn more about faraday refer to:

https://brainly.com/question/4418412

#SPJ9

A pure substance has "one set of universal properties". This means they have some of the universal properties in common.

A characteristic that describes some structures up to an isomorphism is known as a universal property in mathematics, more specifically in category theory.

As a result, independent of the construction technique used, some objects can be described using universal properties. For example, one can define polynomial rings as derived from the field of their coefficients, rational numbers as derived from integers, real numbers as derived from integers, and rational numbers as derived from real numbers.

All of these definitions can be made in terms of universal properties. In particular, the concept of universal property offers a simple demonstration of the equality of any real number structures, requiring only that they satisfy the same universal property.

Diamagnetism is a feature that all substances share.

To learn more about Diamagnetism click on the link below:

https://brainly.com/question/22078990

#SPJ9

The empirical formula for the given compound is BrF₃.

It is given that,

% of Br = 58.37

then % of F = 100 - 58.37 = 41.63%

Let the mass of the compound be 100 g. So, the percentages given are taken as mass.

Mass of Br = 58.37 g

Mass of F = 41.63 g

To formulate the empirical formula,

No. of moles of Br = 58.37/79.90 = 0.73 moles

No. of moles of F = 41.63/19 = 2.19 moles.

For the mole ratio, we divide each value of the moles by the smallest number of moles calculated which is 0.73 moles.

For Bromine = 0.73/0.73 = 1

For Fluorine = 2.19/0.73 = 3

Now, taking the mole ratio as their subscripts.

The ratio of Br : F = 1 : 3

Hence, the empirical formula for the given compound is BrF₃.

To know more about empirical formula visit the link:

https://brainly.com/question/11588623?referrer=searchResults

#SPJ9

The data that we could be able to collect in the antacid cannister lab is the time it takes for the top to pop on the film canister.

Just like every other lab that we could carry out in the pure sciences, the Antacid Film Canister Lab has the aim of trying to obtain the pressure that would be require to blow off the rocket.

In this case, the antacid is gradually dissolved in such a way that the carbon dioxide would be produced and the pressure would keep building up inside the cannister somewhat gradually.

Learn more about antacid cannister:https://brainly.com/question/28187760

#SPJ1

lysozyme, an enzyme found in human saliva, tears, and other secretions, catalyzes the hydrolysis of the beta-1,4-glycosidic linkages and peptidoglycan. This enzyme degrades the bacterial cell wall but it is suitable for human health by preventing bacterial infection.

What is hydrolysis?

The cleavage of biomolecules known as biological hydrolysis occurs when a water molecule is consumed in order to cause the division of a bigger molecule into its component parts. Saccharification is the process of hydrolyzing a carbohydrate into its individual sugar molecules, as occurs when sucrose is broken down into glucose and fructose.

The beta one for, say, acidic connections, an urgent analogy that will demolish the bacterial cell wall. By destroying their peptidoglycan, it breaks down the bacterial cell wall. In addition, since we lack peptidoglycan in our bodies, an enzyme that kills bacteria won't have the same impact on human cells. This is excellent for human health since it can help stop bacterial infections. Because it will presumably destroy microorganisms, we detect it in human secretions that come into contact with the environment, such as tears and saliva.

Hence . lysozyme degrades the bacterial cell wall but it is suitable for human health by preventing bacterial infection.

To learn more about Hydrolysis from the given link

https://brainly.com/question/8740481

#SPJ9

The hydrolysis of the beta-1,4-glycosidic bonds and peptidoglycan is catalyzed by the enzyme lysozyme, which is present in human saliva, tears, and other secretions. This enzyme breaks down the bacterial cell wall, but because it guards against bacterial infection, it is safe for human health.

Describing hydrolysis.

When a water molecule is consumed to split a larger molecule into its constituent parts, the process of cleaving biomolecules is known as biological hydrolysis. Hydrolyzing a carbohydrate into its constituent sugar molecules, as happens when sucrose is broken down into glucose and fructose, is the process known as saccharification.

The beta one, for example, would be for acidic connections, a critical comparison that would destroy the bacterial cell wall. It disintegrates the bacterial cell wall by dissolving their peptidoglycan. Additionally, an enzyme that kills bacteria won't have the same effect on human cells since we lack peptidoglycan in our body. Since it can aid in preventing bacterial infections, this is fantastic for human health. We find it in human fluids that come into contact with the environment, including tears and saliva, because it will likely kill bacteria.

Hence . Lysozyme breaks down bacterial cell walls, yet because it guards against bacterial infection, it's safe for human health.

To know more about carbication intermediate, click on the link below:

https://brainly.com/question/18503359

#SPJ9

To increase the water solubility of resorcinol or salicylic acid, 3m naoh is used to dissolve them. the reason why they dissolve better in NAOH than in water is because resorcinol as well as salicylic acid have some measures of acidic hydrogens and so they can be ionized inside of NaOH.

Salicylic acid must be transformed into salicylate because it is insufficiently soluble in water at room temperature to produce the composition you want.

Note that Salicylic acid can be used to accomplish this by reacting with sodium bicarbonate (baking soda) in water; the salicylic acid will dissolve during the reaction.

Learn more about water solubility from

https://brainly.com/question/24057916

#SPJ1

Copper [Cu] has 28 inner core electrons

Copper is a group 11 element with atomic number 29. It has one valence electron

Valence electron is the electron in the outermost shell and it's the number of electron an atom lose or gain to become a noble gas

Cu has four electron shells with 2,8,18 and 1 electrons in each shell respectively

The outermost shell containing just one electron .

Apart from this shell, the rest of the shells contain 28 electrons and these are regarded as the inner core electrons

Read more

https://brainly.ph/question/1322859

#SPJ4

89.82 MHz frequency tune in an FM radio signal if the station's signal has a wavelength of 3.34m.

The number of cycles or periods each second is measured by frequency. The hertz is the Si derived unit for frequency (Hz).

The temporal rate of change seen in oscillatory and cyclic events, such as mechanical motion, audio signals (music), radio waves, and light, is specified by the frequency, an essential parameter in science and engineering.

The equation is

f = cλ

Where lambda λ is the symbol for wavelength.

Where c = 300 000 000 m/s (3*10⁸ m/s), then:

300000000m/s/3.34m = 89820359.2814s

89.82 MHz.

To know more about Frequency visit:

https://brainly.com/question/14316711

#SPJ9

The moles of carbon dioxide produced by the reaction acetylene of 0.055mol of oxygen is  0.044 mole.

Acetylene is a chemical compound with the formula C₂H₂ and structure H−C≡C−H. it is a hydrocarbon and the best alkyne. This colorless fuel is widely used as a gas and a chemical constructing block. it is unstable in its pure form and consequently is usually handled as a solution.

The balanced chemical reaction is,

2C₂H₂ (g) + 5O₂ (g)   ===>   4CO₂ (g) + 2H₂O (g)

2 C2H2 (g)  + 5 O2 (g)   -------->  4 CO2 (g)  + 2 H2O (g)

2 mol acetylene  -------->  4 mol CO2

  ?? C2H2    ------------> 0.055 mol Co2

moles of acetylene = 0.055 x 2 / 4

                           = 0.0275 mol

moles of acetylene = 0.028 mol

5 mole of oxygen produced = 4 mole of CO₂

0.055mol of oxygen = 4/5 ×  0.055

                                   = 0.044 mole

Learn more about acetylene here:-https://brainly.com/question/15346128

#SPJ1

Answer:

It wont let me download the pdf

Explanation:

Answer:

I can’t download it

Explanation:

In the first reaction of the citric acid cycle, oxaloacetate, which contains 4 carbons, is combined with acetyl-coa, which contains 2 carbons in its acetyl group, to produce citric acid, which contains 6 carbons.

What is carbon?

Chemical element carbon has the atomic number six and the letter C assigned to it. It has a monovalent atom, which means that four of its electrons may be used to create covalent chemical connections. It is nonmetallic. The element table's group 14 includes it. The crust of the Earth contains barely 0.025 percent carbon.

Therefore,

In the first reaction of the citric acid cycle, oxaloacetate, which contains 4 carbons, is combined with acetyl-coa, which contains 2 carbons in its acetyl group, to produce citric acid, which contains 6 carbons.

To learn more about carbons from the given link:

https://brainly.com/question/20994647

#SPJ9

Answer:

A I did this and got an 100 eazy