Answer:
1st law--Newton's first law states that every object will remain at rest or in uniform motion in a straight line unless compelled to change its state by the action of an external force. This is normally taken as the definition of inertia. The key point here is that if there is no net forceacting on an object (if all the external forces cancel each other out) then the object will maintain a constant velocity. If that velocity is zero, then the object remains at rest. If an external force is applied, the velocity will change because of the force.
2nd— The second law explains how the velocity of an object changes when it is subjected to an external force. The law defines a force to be equal to change in momentum(mass times velocity) per change in time. Newton also developed the calculus of mathematics, and the "changes" expressed in the second law are most accurately defined in differential forms. (Calculus can also be used to determine the velocity and location variations experienced by an object subjected to an external force.) For an object with a constant mass m, the second law states that the force F is the product of an object's mass and its acceleration a:
F = m * a
For an external applied force, the change in velocity depends on the mass of the object. A force will cause a change in velocity; and likewise, a change in velocity will generate a force. The equation works both ways.
3rd law-- The third law states that for every action (force) in nature there is an equal and opposite reaction. In other words, if object A exerts a force on object B, then object B also exerts an equal force on object A. Notice that the forces are exerted on different objects. The third law can be used to explain the generation of lift by a wing and the production of thrust by a jet engine.
Why do the other bulbs go dark when one bulb is removed in the series circuit but the other bulbs do not go dark when one bulb is removed in the parallel circuit?
Answer:
I think this
One bulb burning out in a series circuit breaks the circuit. In parallel circuits, each light has its own circuit, so all but one light could be burned out, and the last one will still function.
An increase in voltage results in
If the current is held constant, an increase in voltage will result in an increase in resistance.
hope it helps...!!!
. True or False: A bystander intervention is the term used to define when an individual actively moves in and changes the outcome of a situation.
Answer:
true
Explanation:
Consider an object of mass 2kg at rest on a ramp with βs=0.5 and βk=0.4.
If the ramp angle is 60 degrees, how far can the object travel in the first 1 seconds?
The distance traveled by the object in the first 1 second is determined as 0.98 m.
Distance traveled by the objectThe distance traveled by the object is calculated as follows;
F - μkmgcosθ = ma
0 - μkmgcosθ = ma
- μkgcosθ = a
-(0.4)(9.8)cos60 = a
- 1.96 m/s² = a
s = ut + ¹/₂at²
s = 0(1) + ¹/₂(-1.96)(1)²
s = -0.98 m
|s| = 0.98 m
Thus, the distance traveled by the object in the first 1 second is determined as 0.98 m.
Learn more about distance here: https://brainly.com/question/4931057
#SPJ1
A projectile is shot at initial speed v0 = 8.94 m/s with angle theta = 26.5 degree as shown. It reaches the distance x = 24 m.
Find height h of the cliff, your answer should be positive.
A projectile is shot with the initial speed, it follows the motion called projectile motion. The height of the cliff is 44.91 m.
What is initial speed?The speed at the start of the motion is the initial speed.
The horizontal distance is
x = v₀ sin θ. t
Substitute 26.5 for θ, 24 for x and 8.94 m/s for x, we get the time taken to complete the journey.
t = 24/ (8.94 cos26.5) = 3 s
Maximum height reached
H = v₀²sin²θ/2g
H = (8.94)² x sin²( 26.5) /(2 x 9.8)
H =0.8118 m
The height of the cliff is obtained by the equation of motion
0.8118 - h = -1/2 gt² +v₀sinθ.t
Substitute the values, we get
h =0.8118 +1/2x9.8x (3)²
h =44.911m
Thus, the height of the cliff is 44.91 m.
Learn more about initial speed.
https://brainly.com/question/19348675
#SPJ1
Which of these objects must have the greatest force acting on it? pls help fast
A. A baseball being dropped to the ground.
B. A baseball being tossed 1 meter into the air.
C. A paper airplane being tossed across the room.
D. A bowling ball being tossed 1 meter into the air.
Let's look at Newton's second law
F=maForce is directly proportional towards mass
If mass is more force will be more.
Between baseball and bowling ball Bowling ball has higher mass
So it would expert most force
Option D
Answer this question and show all the necessary steps to solve.
Answer:
√ ae/ ap = √ mp/me 1/2
Explanation:
Mass of the electron = M (Given)
Mass of the proton = M (Given)
Time = t (Given)
Electrostatic force, FE = eE (for both electron and proton)But acceleration of electron, ae =FE/me whereas
acceleration of proton, ap = FE/mp
S = 1/2at²1 = 1/2apt²2
Therefore,t2/t1= √ ae/ ap
t2/t1= √ ae/ ap = √ mp/me 1/2
Thus, the ratio is nearly equal to = √ ae/ ap = √ mp/me 1/2so, option D is correctAnswer:
Correct option is D) …
Explanation:
For electron t1 (small 1) = [tex]\sqrt{ \frac{2S}{ae}[/tex] (small e)
For protion, t2 (small 2) = [tex]\sqrt \frac{2S}{ap}[/tex] (small p)
or [tex]\frac{t2}{t1}[/tex] = [tex]\sqrt\frac{ae}{ap}[/tex] = [tex]\sqrt\frac{eE}{me} *\frac{mp}{eE}[/tex]
= [tex]\sqrt\frac{mp}{me}[/tex]
I’m gonna say everything that needs to go down as an exponent but down for example H20 but the 2 is small, also in order from top to bottom to fraction to fraction (small 2, 1, e, p, e, p, (after equal sign) p, e).
Hope this helped and brainliest pls
22.61 . (a) An insulating sphere with radius has a uniform
charge density P .The sphere is not centered at the origin but at
r->=b->.Show that the electric field inside the sphere is given by
E-> = P(r-> - b->)/3Eo
Answer:
f
Explanation:
A sound travelling through some unknown medium has a wavelength of 0.05m and a frequency of 118,820 Hz. What is the speed of the wave?
a. 5941 m/s
b. 1482 m/s
c. 343 m/s
Answer:
5941m/s
Explanation:
velocity equals frequency x lamdha
Drag each label to the correct location on the image
Identify the particles and characteristics on this model of an atom
(Provide picture to explain more clearly)
A- Positively Charged
B- Electron
C- Proton
E- Neutron
D- Negatively Charged
Answer:
you cant really give any answers because i cant tell u were to drag
what is the speed of light in air ?
[tex] \\ [/tex]
ty! ~
Answer:
the speed of light in air is about 299,000,000 and 3×10⁸ m/s
What energy is produced by a 150 w lightbulb lit for 4.6 hours
W = Pt
W = 150 x (4.6 x 3600) = 2.484 x 10⁶ J
Light nulbs do not "produce" energy.
When YOU bring electrical energy from somewhere and pour it through the light bulb, the bulb turns some of it into light energy and the rest into heat energy .
(150 W) x (4.6 hr) =690 watt-hrs
or 0.69
All nuclear reactions generate radioactive waste. Which answer correctly lists
nuclear reactions beginning with the cleanest reaction?
A. Radioactive decay, nuclear fusion, nuclear fission
B. Nuclear fission, nuclear fusion, radioactive decay
C. Nuclear fusion, nuclear fission, radioactive decay
D. Radioactive decay, nuclear fission, nuclear fusion
An object is being shot from a horizontal ground at an incline angle of 30 degree with respect to the ground at a speed of 52 m/s. Find the duration in seconds that the object is above the height of 14 m. Give your answer with one decimal place.
When an object is thrown at an angle from the horizontal, the path followed by the body is called the projectile motion. The duration in seconds that the object is above the height of 14 m is 4.698 s.
What is speed?Speed is the time rate at which velocity is changing.
Vertical speed component is
V₀y = 52sin 30°= 26 m/s
Given is the height h=14m
Using second equation of motion,
S=ut+ 1/2 at²
Substituting the values, we get
14 = 26t - 4.9t²
4.9t² - 26t +14 =0
Solving the quadratic equation, we get the time as
taking the positive sign, t =4.698 s
taking the negative sign , t = 0.6082 s
Thus, the duration in seconds that the object is above the height of 14 m is 4.698s.
Learn more about speed.
https://brainly.com/question/7359669
#SPJ1
light frequency of 3.6 x 10^14 hz what is the wavelength
8.3×10 to the power minus 7
Explanation:
lambda equals velocity over frequency.
What do these two have an common ? A slice of banana turning brown, A banana getting ripe on the counter
Answer:
After some time on the counter, ripe bananas will develop a brown peel. Bananas contain the enzyme polyphenol oxidase, and when the enzyme interacts with oxygen, it causes a chemical reaction. This chemical reaction, known as enzymatic browning, changes the banana's peel and fruit to brown
Explanation:
If the ball reaches the ground in 8 seconds and the velocity of the ball before it hits the ground is 78.4. What is its acceleration?
also please explain how if you can
Answer:
9.8 m / s^2
Explanation:
Assuming free fall====> there is no initial downward/upward velocity
Assuming metric units 78.4 m/s
vf = a t
78.4 = a (8) shows a = 9.8 m/s^2
A body of mass 200gram is executing SHM with amplitude of 20mm. The magnitude of maximum force which acts upon it is 0.6N. Calculate its maximum velocity?
Given ,
Mass of the body (m) = 200g
Amplitude (A) = 20mm
Maximum force (F) = 0.6 N
Maximum velocity (vmax) =?
We know that
Fmax = mv2max/A
or , 0.6 = 200×10-3xv2max/20×10-3
or , 0.6×20/200= v2max
or , vmax = 0.24 m/s
∴ Maximum velocity = 0.24 m/s2
The value of maximum velocity will be 0.3464 m/s². Energy or work is equal to the product of force and displacement.
What is velocity?The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.
The given data in the problem is
Mass of the body is,(m= 200g)
Amplitude is,(A =20 mm)
Maximum force is,F= 0.6 N
To find;
Maximum velocity
Energy or work is equal to the product of force and displacement.
[tex]\rm KE = \frac{1}{2} mV_{max}^2 \\\\ \rm F_{max} \times A = \frac{1}{2} mV_{max}^2 \\\\ F_{max}= \frac{1}{2}\frac{ mV_{max}^2}{A} \\\\ 0.6= \frac{1}{2}\times \frac{ 0.2 \times V_{max}^2}{20 \times 10^{-3}} \\\\ V_{max}=0.3464 \ m/sec^2[/tex]
Hence,the value of maximum velocity will be 0.3464 m/s².
To learn more about the velocity, refer to the link;
https://brainly.com/question/862972
#SPJ2
Sana loved swimming.She joined a new smimmimg club .When she looked at the floor of the pool to estimate its depth she found that it was shallow .But when she dived in the pool she found out that the pool was quiet deep.Write down the scientific reason for this situation?
Answer:
Refraction
Explanation:
When light passes from a rarer medium into a denser medium, it bends in the medium away from the normal. This creates the phenomenon of "apparent depth" as given in the question.
How to calculate magnitude of tension if given an angle of 10°
Answer:
Mag isip ka po wag Kang tanong ng tanong kac kami po Yung nahihirapan mag hanap ng answer
if i wanted the laser to refract less as it exits the prism, i would
If you wanted the laser to refract less as it exits the prism, you should increase the wavelength of the light.
What is refraction?Refraction can be defined as a phenomenon which describes a change (bend) in the path taken by light when it's at surfaces between different transparent materials.
According to the model of light wave, the refraction of light is inversely proportional to its wave. Thus, you should increase the wavelength of light, if you want the laser to refract less as it exits the prism.
Read more on refraction here: https://brainly.com/question/15838784
#SPJ1
What is specific heat capacity??
Specific heat capacity is the unit mass of a substance is defined as the amount of heat absorbed (kg) (J), when its temperature rises 1 K (or 1 ° C), and its units J / ( kg K) or J / happen. (Kg ° C).Hope it helps u
Stay safe, stay healthy and blessed.Have a good day !Thank you
#Jennifer
Answer:
The specific heat capacity is defined as the quantity of heat (J) absorbed per unit mass (kg) of the material when its temperature increases 1 K (or 1 °C), and its units are J/(kg K) or J/(kg °C).
calculate how much charge passes through the LED in 1 hour if the current flowing in the circuit below is 350mA
Given the the current flowing in the circuit and the elapsed time, the charge that passes through the LED is 1260 Coulombs.
What is Current?Current is simply the rate of flow of charged particles i.e electrons caused by EMF or voltage.
If a charge passes through the cross-section of a conductor in a given time, the current I is expressed as;
I = Q/t
Where Q is the charge and t is time elapsed.
Given the data in the question;
Time elapsed t = 1hr = 3600sCurrent I = 350mA = 0.35ACharge Q = ?We substitute our given values into the expression above to determine the charge.
I = Q/t
Q = I × t
Q = 0.35A × 3600s
Q = 1260C
Therefore, given the the current flowing in the circuit and the elapsed time, the charge that passes through the LED is 1260 Coulombs.
Learn more about current here: brainly.com/question/3192435
#SPJ1
A diverging lens with f = -33.5 cm is placed 14 cm behind converging lens with f = 20cm. where will an object at infinity be focused?
Answer:
Explanation:
Focal length of diverging lens,
fd= -33.5 cm
focal length of converging lens,
fc = 20 cm
Now let s is object distance and s' is image distance.
Now using lens formula for conversing lens
\frac1{f_c}=\frac1{s}+\frac1{s'}
f
c
1
=
s
1
+
s
′
1
Putting all values(object is at s=infinity)
Then image distance
\frac1{s'}= \frac1{f_c}- \frac1{s}
s
′
1
=
f
c
1
−
s
1
=\frac1{20}- \frac1{\infin}=
20
1
−
∞
1
s'=20cms
′
=20cm
Now using lens formula for diversing lens
s''=14-20=-6cm
Using lens formula
\frac{1}{-33.5} = \frac{1}{-6 }+ \frac{1}{s''' }\\s'''=\frac{(6)\times(-33.5)}{(-33.5+6)}\\s'''=\frac{(-201) }{(-27.5) }
−33.5
1
=
−6
1
+
s
′′′
1
s
′′′
=
(−33.5+6)
(6)×(−33.5)
s
′′′
=
(−27.5)
(−201)
image distance for diverging lens
s''' = 7.3 cm (behind the diverging lens)
A diverging lens with f = -33.5 cm is placed 14 cm behind converging lens with f = 20cm. image distance for diverging lens, s''' = 7.3 cm (behind the diverging lens)
what are the type of lens ?When a lens in the path of a beam of parallel rays causes the rays to diverge after refraction, it is referred to as a diverging lens.
It always creates a virtual image and has a thinner core than its boundaries.
Concave lenses(diverging lenses) function as diverging lenses because they cause light rays to diverge as they pass through them.
Therefore, when used with air as the operating medium, a concave lens can be thought of as a diverging lens.
The concave lens has several applications, including in telescopes, cameras, lasers, glasses, binoculars, and other optical devices.
For more details lens, visit
https://brainly.com/question/29459725
#SPJ2
What type of wave is illustrated below?
Longitudinal
Transverse
Surface wave
Seismic wave
Answer:
Longitudinal
Explanation:
I searched it up.
Above is an image of people waiting at the train station to get on the incoming train. As the train slows down to stop, is it accelerating? Why or why not?
The definition of acceleration states that an object accelerates when it______, ______, or changes.
what are the missing words?
Explanation:
Acceleration is a vector quantity which is defined as the rate at which an object changes its velocity
• Kelley and Raul are moving a 95 kg desk to the right. If the coefficient of friction between the desk and the floor is 0.29, what is the force of friction that will oppose the motion of the desk?
f = μk.N (N = m.g)
f = 0.29 x 95 x 10
f = 275.5 N
how to calculate the total input energy transfer
Answer:
i dont know
Explanation:
sorry i cant answer this question
What distance does the car travel in the 3 seconds?
A 1200 kg car traveling at an unknown velocity has a rear-end collision with a 1600 kg car parked in the road. The cars lock bumpers and skid off together at 3.0 m/s. What was the velocity of the 1200 kg car right before the collision?
Answer:
Gotta be it
Explanation:
m1*v1 = m2*v2
1200*v1 = 1600*3
1200*v1 = 4800
v1 = 4800 / 1200
v1 = 4.0 m/s