1 point
Kinetic friction is defined as a force that acts between moving surfaces. A
body moving on the surface experiences a force in the opposite direction
of its movement. A student is investigating the motion of a block sliding
down a ramp onto the floor. The diagram below shows the block at five
points during the investigation. The block is at rest at point V. The student
releases the block so that it slides down the ramp and stops at point Z.
Which of the following best explains where kinetic friction is acting on the
block?

Answers

Answer 1

Answer:

Explanation:

Not sure what your options are but anything that says something like

"at the block surface in contact with the ramp along the line from V to Z"  is probably a good shot.


Related Questions

A 300 cm rope under a tension of 120 N is set into oscillation. The mass density of the rope is 120 g/cm. What is the frequency of the first harmonic mode (m

Answers

Answer:

Explanation:

f = [tex]\sqrt{T/(m/L)} / 2L[/tex]

T = 120 N

L = 3.00 m

(m/L) = 120 g/cm(100 cm/m / 1000 g/kg) = 12 kg/m

                                                  (wow that's massive for a "rope")

f = [tex]\sqrt{120/12} /(2(3))[/tex])

f = [tex]\sqrt{10\\}[/tex]/6 = 0.527 Hz

This is a completely silly exercise unless this "rope" is in space somewhere as the weight of the rope (353 N on earth) far exceeds the tension applied.

A much more reasonable linear density would be 120 g/m resulting in a frequency of √1000/6 = 5.27 Hz on a rope that weighs only 3.5 N

A 2.55 kg piece of lead at 40 degree Celsius is placed in a very large quantity of water at 10 degree Celsius and thermal equilibrium is eventually reached. Calculate the entropy change of the lead that occurs during this process. The specific heat of lead is 130 J/(kg K).

Answers

6.6 J/K

1.4 J/K

190 J/K

100 J/K

6.2 J/k

i think this is a answer

Help!
A man standing in front of a plane mirror finds his image to be at a distance of 6m from himself. The distance of man from the mirror is ​

Answers

Answer:

The distance of man from the mirror is 3 m

Refer to the attachment

[tex]\Large\textsf{Hope \: It \: Helped}[/tex]

The distance of the man from the mirror is 3m

From the characteristics of image formed in a plane mirror,

Virtual and erectFormed behind the mirrorSame size as the objectLaterally inverted Distance of the image behind the mirror is the same as the distance of   the object from the mirror.  

⇒ From the last point,

Let the distance of the image behind the mirror be xAlso the distance of the man from the mirror is x

⇒ From the question,

x+x = 62x = 6x = 6/2x = 3 m

Hence, The distance of the man from the mirror is 3m

Learn more about mirror here:

WILL GIVE BRAINLIEST!!! NO LINKS PLZ!!!!

A 225 g hockey puck is sliding on ice in an arena towards the end boards that are 15.7 m away. The puck is travelling 12.0 m/s when it slides into some rough ice (coefficient of kinetic friction= 0.550).
Determine:
a) the acceleration of the puck on the rough ice.
b) the distance from the end boards the puck is when it comes to a stop.

Please show work.​

Answers

Answer:

Explanation:

a) the acceleration of the puck on the rough ice.

a = μg = 0.550(9.81) = 5.3955 = 5.40 m/s²

 (comes from μ = F/N = ma/mg = a/g)

b) the distance from the end boards the puck is when it comes to a stop.

v² = u² + 2as

0² = 12.0² + 2(-5.40)s

s = 13.3 ft

so distance from the boards is

15.7 - 13.3 = 2.4 m

by the way...that's some VERY rough ice...more like sand.

A body is thrown up into the air takes a time of 4s to reach the height. What is the velocity with which the body was thrown up.(g=10ms2)​

Answers

Answer:

40m/s

Explanation:

V= u + at

v= 0

a= -10

t= 4

0= u -40

u= 40m/s

just trial!!!!!!!

is it true that playing badmenton help you to become a better person?

Answers

Answer:

There is no scientific evidence that playing specifically l badminton makes you a better person, but sport and exercise in general release hormones which can make you feel more happy therefore making you nicer to the people around you and 'a better person'.

Answer:

It's true because playing any sport makes a person happy. So a happy person is a better person.

Please Mark as brainliest.


Based on the law of conservation of mass, if approximately 20g of water reacts in the following equation,
producing about 15g of oxygen, what mass of hydrogen (H2) was produced in this reaction?
2H20
2H2 + O2

Answers

Answer: H2O2

Explanation:

First, calculate the moles of H2O2 reacting. In order to do this, we must evaluate the relative molecular mass ( Mr ) of hydrogen peroxide

12) A horizontal force of 200 N is applied to move a 55-kg cart (initially at rest) across a 10 m level surface. What is the final speed of the cart? [hint: use work – energy principle] [3 marks]

Answers

Hi there!

We can use the following:

W = ΔKE = F · d

Find the work done on the cart:

W = 200 · 10 = 2000 J

Now, this is equal to the change in kinetic energy of the object. Its initial kinetic energy is 0 J since it starts from rest, so:

2000J = KEf - KEi

KE is given as:

[tex]KE = \frac{1}{2}mv^2[/tex]

2000J = 1/2(55)v²

4000 = 55v²

√(4000/55) = 8.53 m/s

Question No. 1 Marks = = 5 +5 +2 = 12

The driver of a 2.0 × 103 kg red car traveling on the highway at 45m/s slams on his brakes to avoid striking a second yellow car in front of him, which had come to rest because of blocking ahead as shown in above Fig. After the brakes are applied, a constant friction force of 7.5 × 103 N acts on the car. Ignore air resistance.
(a) Determine the least distance should the brakes be applied to avoid a collision with the other vehicle?
(b) If the distance between the vehicles is initially only 40.0 m, at what speed would the collision occur?
(c) Write your conclusive observations on the result obtained from this numerical. i.e. the importance of Physics in daily life.



Question No. 2 Marks = 8
Consider an automobile moving at v mph that skids d feet after its brakes lock. Calculate how far it would skid if it was moving at 2v and the brakes were locked.

Answers

The kinematics and Newton's second law we can find the results for the questions about the braking movement of the car are;

Question 1.

     a) The stopping distance is: x = 270 m

     b) The initial velocity is: v₀ = 17.3 m / s

     c) Concepts of kinematics and Newton's second law show us the expressions to make safe trips and avoid accidents on the roads.

Question 2.

The stopping distance is: x = 4d

Given parameters

Mass of the red carriage m1 = 2,0 10³ kg Red car speed vo = 45 m / s Friction force fr = 7.5 10³ N.

To find

Question 1.

    a) Minimum braking distance.

    b) If the distance is x = 40.0 m, what speed should the vehicles have?

    c)  Conclusive importance of physics in daily life.

Question 2.

The distace to stop.

Kinematics studies the movement of bodies, looking for relationships between the position, speed and acceleration of bodies.

         v² = v₀² - a2 x

Where v and v₀ are the current and initial velocity, respectively, at acceleration and x the distance traveled.

Newton's second law states that the net force is proportional to the mass and the acceleration of the body.

          F = ma

Where F is force, m is mass and acceleration.

In the attachment we see a diagram of the forces in the system. Let's look for the acceleration of the body

        fr = m a

        a =[tex]\frac{fr}{m}[/tex]  

        a = [tex]\frac{7.5 \ 10^3}{2.0 \ 10^3 }[/tex]  

        a = 3.75 m / s²

This acceleration is in the opposite direction to the speed.

Let's find the distance needed to stop, the final speed is zero.

          0 = v₀² - 2 ax

           x = [tex]\frac{v_o^2 }{ 2a}[/tex]  

Let's calculate.

          x = [tex]\frac{45^2 }{2 3.75}[/tex]  

          x = 270 m

This is the minimum distance that the two vehicles must separate to avoid a collision.

b) We look for speed.

        v₀ = [tex]\sqrt{2ax}[/tex]  

        v₀ = [tex]\sqrt{2 \ 3.75 \ 40.0}[/tex]  

        v₀ = 17.3 m / s

c) The concepts of kinematics and Newton's second law show us the expressions to make safe trips and avoid accidents on the roads.

2) They indicate that the initial velocity is v and the distance traveled to stop is d, let's find the acceleration.

           0 = v₀² - 2ax

Let's substitute.

             a = [tex]\frac{v^2}{2d}[/tex]  

They ask the distance traveled if this car traveled from an initial speed 2v.

             0 = v² - 2 a x

             x = [tex]\frac{v^2}{2a}[/tex]  

We substitute

            x = [tex]\frac{(2v)^2 }{2} \ (\frac{2d}{v^2})[/tex]  

            x = 4 d

In conclusion, using the kinematic relations and Newton's second law we can find the results for the questions about the braking movement of the car are;

Question 1

       a) The stopping distance is: x = 270 m

       b) The initial velocity is: v₀ = 17.3 m / s

        c) concepts of kinematics and Newton's second law show us the expressions to make safe trips and avoid accidents on the roads.

Question 2.

 The stopping distance is x = 4d

Learn more about kinematics here:  brainly.com/question/13202578

Question 2 of 25

If JKLM is a parallelogram, what is the length of LM?

K

18

8

M

O A. 10

O B. 18

O C. 8

D. 26

SUBMIT

Answers

Answer:its  10

Explanation:

Answer:

8

Explanation:

A ball is launched from ground level at 30 m/s at an angle of 35° above the horizontal. how far does it go before it is at ground level again

Answers

Answer:

Explanation:

Ignoring air resistance

Initial vertical velocity is 30sin35 = 17.2 m/s

Gravity reduces this velocity to zero in a time of

t = v/g =17.2 / 9.8 = 1.755 s

it takes the same time to come back down to ground level for a total flight time of 2(1.755) = 3.51 s

The horizontal velocity is 30cos35 = 24.57 m/s

the distance traveled horizontally is

d = vt = 24.57(3.51) = 86.298... = 86 m

A 0.50-kg block attached to an ideal spring with a spring constant of 80 N/m oscillates on a horizontal frictionless surface. The total mechanical energy is 25 J. The maximum speed of the block is:

Answers

Answer:

Explanation:

easy way

when system is all kinetic energy, velocity is at a maximum

E = ½mv²

v = √(2E/m) = √(2(25)/0.5) = √100 = 10 m/s

harder way

ω = √(k/m) = √(80/0.5) = √160 rad/s

When the system is entirely spring potential, the amplitude A is

E = ½kA²

A = √(2E/k) = √(2(25)/80) = 0.790569... = 0.79 m

maximum velocity is ωΑ = 0.79√160 = 10 m/s

What is the net force here?


11 N left
6 N right
1 N right
4 N right

Answers

answer = 6n to the right

Explanation:

2n plus 4n equals 6n

since 6n is more than 5n it goes 6n to the right

The mass of fifteen washers is _____ kg, which exerts a force of _____ N

Answers

Answer:

It could be related with the lesson from which this question belongs as far we did not read the lesson

Sorry

explain the process of convergence and divergence ! HELPPP

Answers

Answer:

Divergence generally means two things are moving apart while convergence implies that two forces are moving together. ... Divergence indicates that two trends move further away from each other while convergence indicates how they move closer together.

Explanation:

Motion Velocity
Reference point Speed

1. An object is in __________ when its distance from a(n) ________ is changing.

2. Speed is given direction is called _______________

3. ____________ can be calculated if you know the distance that an object travels in one unit of time.

Answers

Answer:

1. An object is in motion when its distance from another object is changing.

2.Speed is given direction is called velocity.

Speed can be calculated.......

why is it so important that you take care of your nervous system?

Answers

Answer:

The nervous system handles the stress response, which, if overworked, can eventually lead to diseases ranging from high blood pressure to diabetes.

Explanation:

hope I helped

Air currents escape room level 3 how to do it

Answers

Answer:

just do it. it's simple be smart friends

Suppose a cannon is sitting on top of a 50.0 m high hill and a 5.00 kg cannon ball is fired with a velocity of 30.0 m/s at some unknown angle. What is the velocity of the cannon ball when it strikes the earth?

Answers

The final velocity of the cannon ball when it strikes the earth is 43.36 m/s.

The given parameters:

Height of the hill, h = 50 mMass of the cannon, m = 5 kgVelocity of the ball, v = 30 m/s

The final velocity of the cannon ball when it strikes the earth is calculated by applying the principle of conservation of energy as follows;

[tex]P.E_i + K.E_i = P.E_f + K.E_f\\\\mgh_i + \frac{1}{2} mv_i^2 = mgh_f + \frac{1}{2} mv_f^2\\\\gh_i + \frac{1}{2} v_i^2 = g(0) + \frac{1}{2} v_f^2\\\\2gh_i + v_i^2 = v_f^2\\\\v_f = \sqrt{2gh_i + v_i^2 } \\\\v_f = \sqrt{(2 \times 9.8 \times 50) \ \ + \ \ 30^2} \\\\v_f = 43.36 \ m/s[/tex]

Thus, the final velocity of the cannon ball when it strikes the earth is 43.36 m/s.

Learn  more about conservation of energy here: https://brainly.com/question/166559

Why does the earth stay in orbit around the sun instead of drifting away from it into space?
A Electric force between the Sun and Earth
B Magnetic force between the Sun and Earth
Gravitational force between the Sun and Earth

Answers

Answer:

b it is b part answer i think so

2. The system shown is accelerated by applying a tension Ti to the right-most cable. Assume the system is
frictionless. Solve for the tension in the cable between the blocks, T2, in terms of T. (not a).

Answers

The tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex]

The given parameters:

Mass of the first block, = 2 kgMass of the second block, = 5 kg

The net force on the block system is calculated by applying Newton's second law of motion as follows;

Total mass of the block-system = 2 kg + 5 kg = 7 kg

The acceleration of the block-system;

[tex]a = \frac{T_i}{7}[/tex]

The tension in the cable between the blocks, T₂, is calculated as;

[tex]T_2 = m_2 a\\\\T_2 = 2a\\\\T_2 = 2 \times \frac{T_i}{7} \\\\T_2 = \frac{2T_i}{7}[/tex]

Thus, the tension in the cable between the blocks, T₂, is [tex]\frac{2T_i}{7}[/tex].

Learn more about acceleration of two connected block systems here: https://brainly.com/question/25939890

3. A ball is dropped from the roof of a building 55 meters tall. What is the approximate time of fall?
(Neglect air resistance and round to 2 decimal places).

Answers

Answer:

3.35 seconds

Explanation:

Use one of the equations of accelerated motion:

Δd = v1Δt+1/2aΔt^2

and rearrange for Δt which is time

Δt = √(2Δd)/a

now we can substitute in the values

a= 9.8 (acceleration due to gravity) and Δd= 55 as that is the height of the building

Δt = √(2*55)/9.8

Δt = 3.3503s

State the term used to describe the turning force exerted by the man

Answers

]A force called the effort force is applied at one point on the lever in order to move an object, known as the resistance force, located at some other point on the lever.

The way levers work is by multiplying the effort exerted by the user. Specifically, to lift and balance an object, the effort force the user applies multiplied by its distance to the fulcrum must equal the load force multiplied by its distance to the fulcrum. Consequently, the greater the distance between the effort force and the fulcrum, the heavier a load can be lifted with the same effort force.

An object accelerates at a rate of -3.2 m/s^2 to a velocity of 8 m/s over a time of 14 s. What was its initial velocity?

Answers

[tex]\text{Given that,}\\\\\text{Acceleration, a = -3.2 m s}^{-2}\\\\\text{Time, t = 14 sec}\\\\\text{Velocity, v = 8 m s}^{-1}\\\\\text{Initial velocity, v}_0 = ?\\\\\\v = v_0 +at\\\\\implies v_0 = v -at = 8 -(-3.2)(14) = 8 + 44.8 =52.8~ \text{m s}^{-1}[/tex]

You are on the roof of a building 30 m above the ground. Using hand crank 3 points
you are to lift a 300 kg dresser on to the roof. How much work must to
generated to lift the dresser? *

Answers

Answer:

The work will increase the potential energy.

W = PE = mgh = 300(9.8)(30) = 88200 J

Which of the following waves DO NOT require a medium to travel?

Answers

Answer:

hey man, think you forgot to put the questions


Word Bank:
Electrical
Mechanical
Chemical
Light
Thermal
Sound

Answers

Answer:

Light to

Electrical to

mechanical and sound

PLSSS HELP WILL MARK AS BRIANLIEST
The atomic mass is equal to the number of ______.
A.Protons
B.Electrons and neutrons
C.Neutrons and protons
D.neutrons

Answers

The answer is C : Neutrons and Protons

Help me outtttt jejjejejeje

Answers

Answer:

do it got a picture

Explanation:

Fireworks have a very high reaction rate. Describe and explain what could be done to slow down their reaction.

Answers

Answer:

Don't light up the firework or put less fire

Explanation:

Using Pharaoh's serpent or "black snake" firework could be  done to slow down their reaction.

What are fireworks chemically?

Gunpowder is typically made using three reagents: potassium nitrate, carbon, and Sulphur. These kinds of elements are used in a combustion reaction that results in this detonation explosion. You have solid reagents reacting to produce gases in the form of solid potassium carbonate, solid potassium sulphate, nitrogen gas, and carbon dioxide gas.

The numerous metal salts that are added to produce the colours spread out all of that material, which is in a super-heated state. In such extremely intense environment, the metal salts heat up and get "excited," emitting light as a result.

If you want an explosion, you need the chemical reaction to go quickly in order to release a large volume of gas in a brief period of time. You might have a chemical reaction that happens rather slowly, like the Pharaoh's serpent or "black snake" firework.

Find more about fireworks in the link:

https://brainly.com/question/16737516

#SPJ2

Other Questions
what is the name of Best player in year 2012 _____ refers to an altered state of consciousness characterized by _____ and the feelings that one's actions are involuntary. What led to the Han golden age? help pls and thank you why did the federal government create this program in 1933? Antonym of adjacent i need help with this!!!! Write a fraction with a denominator of 9 whose equivalent percent is less than 100%. In complete sentences, explain why the fraction is less than 100%. Amaya is a member of a new product design team. The team leader proposed a process that would get quick results, but Amaya was concerned quality would suffer. Due to _______, Amaya did not voice her concern as she did not want to appear unsupportive of the team. There is no provision for any sort of ballot proposition at what level? What is meant by doing gender, and how does this both perpetuate gender roles and change them? I need help with this please identify the types of the given viewing materials encircle all the print materials underline all the non-print materials Solve for X Enter the answer only with no spaces between numbers, symbols, and or variables which is the first news paper of Nepal Which correctly lists three items that are removed during the purification of wastewater?chemicals, gases, solidsdebris, chemicals, solidsgases, debris, groundwatergroundwater, gases, harmful organisms Imagine you are part of a group of engineers who need to test a scale model of a footbridge. It will be a scale model of the bridge. The footbridge will cross over a busy road and allow people to cross the road safely. How could a relatively small design error of 2 centimeters in the model system cause a significant problem in construction of the bridge? What happened to members of some families who held differing views on independence? They learned to compromise. They were put on trial. They did not speak to one another. BEST ANSWER GETS BRAINLIESTWhat is a polar molecule? One of the main properties used to describe a population