Answer:
Explanation:
1.-Energía eléctrica ( electricidad ) proveniente de una fuente AC ( es decir de corriente alterna)
2.-Hay un proveedor de servicios que lleva la energía a las comunidades en general y en particular la lleva hasta mi casa y escuela. Se define como acometida eléctrica, la infraestructura que lleva la energía desde la red de distribución al tablero principal en el abonado. La acometida puede ser aérea o subterránea, y normalmente consta de tres conductores ( de los cuales dos son calibre AWG # 8 ( dos fases ) y uno AWG # 10 ( neutro ). Esta configuración permite tener: 120 y 240 (V) en servicio en la casa y suficiente capacidad para la carga eléctrica de una casa normal
3.-Si, el tipo de corriente. En el caso de una linterna se usan "pilas" o baterías de corriente directa ( que no varia en el tiempo), en la casa la corriente es alterna de 60 ciclos por segundo de frecuencia.
4.-Si el voltaje es menor en una medida importante la ampolleta no alumbra por cuanto si por ejemplo el voltaje nominal ( o de funcionamiento es 120 V y el voltaje suministrado es 50 V ese voltaje será insuficiente para hacer funcionar el circuito). Si el voltaje es mayor dígamos 240 V la ampolleta se quema.
5.-El interruptor nos asegura la maniobra a nuestra voluntad del circuito del cual forma parte. Es decir si tengo un circuito de alumbrado ( 1 bombillo y un interruptor ) ese interruptor me permitirá apagar y encender la luz cuando yo quiera.
Los breaker son "interruptores" son dispositivos de protección para caso de sobrecargas y/o cortocircuitos
In which stage of the star, does nuclear fusion reaction begin?
Nuclear fusion reactions begin in the main sequence stage of a star's life.
During the main sequence stage, a star is in hydrostatic equilibrium, meaning that the outward pressure of the hot, dense gas at its core is balanced by the inward gravitational force. This balance allows the star to maintain a stable size and luminosity.
At the core of a main sequence star, the temperature and pressure are high enough to initiate nuclear fusion reactions, in which hydrogen nuclei combine to form heavier helium nuclei. These reactions release a large amount of energy in the form of light and heat, which helps to maintain the high temperature and pressure at the core and keep the star in hydrostatic equilibrium.
Learn more about Nuclear Fusion here:
https://brainly.com/question/17870368
#SPJ4
Which of jupiter's moons experiences the greatest gravitational force of attraction to jupiter?.
The moon that experiences the greatest gravitational force of attraction from Jupiter is Io, which is the innermost of Jupiter's four largest moons (also known as the Galilean moons).
Io is the most massive of the Galilean moons, and it is also the closest to Jupiter, which means that it experiences the strongest gravitational force of attraction from the planet. In fact, the strong gravitational pull of Jupiter on Io is so great that it causes Io to experience significant tidal forces, which have caused its surface to become heavily fractured and geologically active.
It's worth noting that while Io experiences the strongest gravitational force of attraction from Jupiter, the other Galilean moons (Europa, Ganymede, and Callisto) also experience significant gravitational forces due to their large masses and close proximity to Jupiter.
To know more about Gravity
https://brainly.com/question/14874038
#SPJ4
Answer:the answer is A, lo
Explanation:
Objects which stay at one place under water, neither sinking or floating, are said to have what kind of buoyancy? Neutral, negative, or positive
Answer:
Neutral
Explanation:
The buoyant force balances the force of gravity when the average density of an object is equal to the density of the fluid in which it is immersed, resulting in the object sinking (if its density is greater than the density of the fluid) or rising (if it is less). Neutral buoyancy occurs when the average density of an object equals the density of the fluid in which it is immersed. There is no sinking or rising for an object with neutral buoyancy.
what is the velocity of a car that went a distance of 400ft in 25 seconds
Speed = (distance covered) / (time to cover the distance)
Speed = (400 ft) / (25 seconds)
Speed = 16 ft/sec
That's the car's speed.
We don't have enough information to state its velocity.
A gas dissolves in a liquid most rapidly when under _______ pressure.
High
A gas dissolves in a liquid most rapidly when under High pressure.
An example of a high pressure boiler is one that produces energy in thermal power plants that runs at 80 bars or more. They produce electricity by turning water into steam through thermal energy using water-filled tubes in a metal tank or enclosure, which is then utilized to power machinery. There is a higher likelihood of leaks occurring in the system if the boiler pressure is too high. The system won't function as well if the boiler pressure is too low, though. For your system to effectively heat your home, it is crucial to maintain the proper boiler pressure.
Learn more about High pressure here:
https://brainly.com/question/12473337
#SPJ4
while exploring an ancient mayan tomb, you discover that the walls begin to move and are closing in on you. by exerting 400 n of force, you are able to keep a wall from coming closer. the work you are doing on the wall is
Because the wall is not moving, the work you are performing on it is coming closer by exerting 400 n of force.
What work has been done to the wall?Despite the man's forceful efforts, the wall does not budge. Work completed equals force applied times displacement, and since the wall's displacement is 0, work completed is also zero.
Is work completed when a wall is pushed?When an object experiences force and is moved from its starting location, this is referred to as doing work. The Joule is the SI unit of work. A joule is defined as a newton of force applied to an object that results in a displacement of one meter. This signifies that when force is exerted to a wall, nothing is accomplished.
To know more about Work done visit:-
https://brainly.com/question/13662169
#SPJ4
I need help getting the answer for this!
The shuttlecock began 7 meters above the ground, and fell through a vacuum. The equation a = v/t shows acceleration (a), which is the change in velocity (v) over the change in time (t).
What is the formula for a graph of velocity and time?time chart A velocity vs. time graph can be used to determine position and to calculate velocity. We are aware that v = d/t. Rearranging the equation with a little mathematics reveals that d = v t.
What is the acceleration time graph's formula?△a = △v/△t, For an item travelling at a constant rate of acceleration, the rate of acceleration remains constant over all time intervals. As a result, the acceleration-time graph has a slope of zero and is parallel to the time axis.
Learn more about velocity here;
https://brainly.com/question/18084516
#SPJ1
1a. state the condition for the equilibrum of a rigid body acted upon by parallel forces
1bi. Describe an experiment using the principles of moments to determine the mass of a meter rule
1bii. State two precautions necessary to ensure accurate results
c. what is a couple in physics
The response to the questions are given below:
1a. The condition for the equilibrium of a rigid body acted upon by parallel forces is that the vector sum of all the forces acting on the body must be equal to zero, and the vector sum of all the torques (moments) acting on the body must also be equal to zero.
1bi. An experiment to determine the mass of a meter rule using the principles of moments could involve suspending the meter rule from a pivot point using a string or wire, and then applying known weights to the ends of the meter rule.
1bii. Two precautions that should be taken to ensure accurate results in this experiment would be to ensure that the pivot point is perfectly level and that the weights applied to the ends of the meter rule are applied at exactly the same distance from the pivot point.
C. A couple in physics is a pair of forces that act on a body in such a way that they produce a turning effect, or torque, about a fixed point. A couple consists of two equal and opposite forces that are applied to the body at different points.
What is equilibrium of a rigid body?When a rigid body's linear momentum or rotational momentum are not changing at any given time, it is said to be in mechanical equilibrium. The body is in a state of mechanical equilibrium when there is no linear or angular acceleration.
When a rigid body's linear and angular acceleration are both zero with respect to an inertial frame of reference, we say that it is in equilibrium. A body in equilibrium can therefore move, but in that case, its linear and angular velocities must remain constant.
Therefore, In essence, there should not be any acceleration for an object to be in equilibrium (linear or angular). Therefore, the item must have zero net force and zero net torque.
Learn more about equilibrium from
https://brainly.com/question/517289
#SPJ1
if equal numbers of suspension clamps are on each side of the support, can their weights be omitted from the calculations? explain
Yes, the weight of the suspension clamps is omitted from the calculation as long as each side of the support is the same.
Suspension clamps are mainly used for overhead power lines or substations. It can hang wire, lightning protection wire on insulator string, or lightning protection cable on the tower by connecting fittings. Suspension clamps are mainly made of malleable iron and aluminum alloy.
Given the same number of clamps on both sides of the support, when we calculate the torque, the weight of the clamps will disappear from each side.
Like there are 2 clamps on each side so the torque due to the clamps are going to be
τ = r x F = 2 * W * d - 2 * W * d
So that the weight of the clamps can be omitted as in the final calculation of the torque as each clamp will cancel out. Provided that the position of the clamps on both sides of the support is the same (i.e., distance d from the support)
Learn more about the suspension clamps at https://brainly.com/question/17156840
#SPJ4
which of the following leaves will be the easiest to make a mat?
Answer:
c
Explanation:
Discuss the importance of understanding both mechanical and electromagnetic waves by giving examples, such as designing comfortable and safe structures and technologies.
This procedure enables life as we know it. And electromagnetic waves influence modern life in countless smaller-scale (but more immediate) ways. For example, electromagnetic waves are responsible for your cell phone, Wi-Fi connection, microwave, and medical imaging methods like x-ray and MRI.
What understanding mechanical and electromagnetic wave?Energy is moved around the planet in two main ways: mechanical waves and electromagnetic waves. Mechanical waves include air and water waves caused by sound.
Therefore, Ocean waves are crucial for climate modelling, weather forecasting, coastal towns, shipping lanes, and offshore business.
Learn more about waves here:
https://brainly.com/question/3101711
#SPJ1
A ball on a string is swung in a horizontal circle at a constant speed of 4.3m/s. The centripetal acceleration of the ball is 24.7 m/s^2. The mass of the ball is 3.2kg.
What is the length of the string?
Please show all work thank you so much!
The length of the string is 75 cm.
What is centripetal acceleration?Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center.
Given that: The centripetal acceleration of the ball is: a = 24.7 m/s^2.
constant speed of the ball is: v = 4.3m/s.
Let the length of the string is l.
We know that: The centripetal acceleration: a = v^2/l
l = v^2/a
= (4.3)^2/24.7
= 0.75 m.
Hence, the length of the string is 0.75 m or 75 cm.
Learn centripetal acceleration here:
https://brainly.com/question/14465119
#SPJ1
30 POINTS PLS HELP
The picture attached has the question
Answer: cold or hot
Explanation:
What is the formula of cutoff wavelength?
The cutoff wavelength calculation formula is λ = c/f.
The cutoff wavelength is what?The cutoff wavelength is the lowest wavelength at which light may cause electrons on a metal plate to become free.
The shortest wavelength of light that will not cause electrons to be emitted from a metal surface is the cut-off wavelength, sometimes referred to as the threshold wavelength. If no electrons are released, the light's wavelength must be below the threshold wavelength.
The wavelength at which the power level of the Higher Order Modes has decreased by 19.3 dB in comparison to the level of the Fundamental Mode is known as the Cut-off Wavelength (strictly speaking this is true only for the Second Order Mode).
The formula to calculate cutoff wavelength is λ = c/f
where λ is the wavelength of light
c = speed of light
f = frequency of light
To learn more about cut-ff wavelength from given link
brainly.com/question/27986610
#SPJ4
Paula is sailing across a lake. As the boat accelerates, she thinks about how
the wind is pushing on the sail. Which statement below best represents
what is happening between the sail and the air?
A. The sail is pushing the wind back and slowing down the air.
B. The sail and air are not pushing each other, they are just moving together.
C. The air is pushing on the sail, but the sail is not pushing the air.
D. The sail is pushing the wind forward with the air.
Which statement do you most agree with? Explain you reasoning.
The answer is (A.) The sail is pushing the wind back and slowing down the air. The wind is pushing the sail and the sail pushes the wind back and slows the air down.
As the boat is sailing, the wind will be faster than the boat. This fast wind is obstructed by the sail. That is, the fast wind gets slowed down by the sail because the sail pushes the wind backwards which slows down the wind. This will make the wind push the boat forward thereby accelerating the boat.
Learn more about the forces acting on a boat here:
https://brainly.com/question/21186114
Atoms that have a positive charge will be attracted to atoms with a
charge. *
O Positive
O Negative
O Neutral
Answer:
negative
Explanation:
positive charges attract negative charges and vice versa. and are possible to nullify
Which produces more electricity wind or solar?
In comparison to solar panels, which are just 18% to 22% efficient, wind turbines typically capture 60% of the energy that travels through them. It follows that it is undisputed that a single house wind turbine can generate more electricity than a number of solar panels.
Tell me about solar energy?Through photovoltaic (PV) panels or mirrors that concentrate solar radiation, solar technologies turn sunlight into electrical energy. Batteries or thermal storage devices can be used to store this energy or to generate power.
What are the principles behind a solar panel's operation?On the top of a solar panel, a thin layer of silicon is hit by photons, or light particles, which dislodge electrons from silicon atoms. The wiring in solar panels is able to capture the electric current that this PV charge generates.
To know more about electricity wind or solar visit :-
https://brainly.com/question/889163
#SPJ4
What is the formula of this energy frequency relations?
E = hv is the energy equation. In the formula, E stands for energy, h for Planck's constant (6.626 x 10 -34 J s), and v for frequency. Since frequency rises as energy falls, frequency and energy are related directly in the energy equation.
The frequency of the radiation directly affects how much energy each quantum contains. The amount of energy carried is inversely proportional to wavelength since frequency and wavelength have an inverse relationship.
The equation E=hv, where h is Planck's constant, describes the relationship between a photon's energy E and frequency v.
In essence, energy is inversely proportional to wavelength but directly proportional to radiation frequency. Accordingly, energy rises with a rise in frequency or a fall in wavelength, and falls with a fall in frequency or a rise in wavelength.
To learn more about energy frequency relation from given link
https://brainly.com/question/13396102
#SPJ4
Explain why running up a flight of stairs is so much different than walking if both require the same amount of work?
Answer:
Running up a flight of stairs is different than walking because it requires a different type of muscle activity. When walking, the muscles in your legs move in a more controlled and rhythmic manner, allowing you to maintain a steady pace and avoid stumbling. In contrast, running up stairs requires your muscles to work in a more explosive and powerful manner, generating bursts of force to push you upward and forward. This type of muscle activity is much more intense and demanding, and it requires more energy and effort than walking.
Additionally, running up stairs also requires you to overcome the force of gravity to a greater extent than walking. When you walk up stairs, you are able to use the stairs to support your weight and to assist you in moving upward. When running, however, you are moving too quickly to use the stairs in this way, and you must rely on your own muscle power to lift your body upward. This additional force of gravity makes running up stairs more challenging and demanding than walking.
If a species experiences a helpful mutation, like camouflage, explain how that mutation would help the species to better I survive and flourish. Again, be sure to explain how and why that mutation would be helpful.
HELP I NEED IT FAST PLEASE ILL MARK B!!!! IF CORRECT
What is the stopping potential when metal with work of 0.6 eV is illuminated with the light of 2.6 VB 3.6 VC 0.8 VD 1.4 V?
Correct option is D, the stopping potential when metal with work of 0.6 eV is illuminated with the light of 2.6 ev is 1.4 V
The minimal negative voltage that must be provided to the anode to halt the photocurrent is known as stopping potential. When expressed in electron volts, the maximal kinetic energy of the electrons is equal to the stopping voltage. The stopping potential (V0) for the specified frequency of incident radiation in an experimental setup for the photoelectric effect is the value of the negative potential of the collector plate or anode at which the photoelectric current will fall to zero.
Given: E = 2 eV and 0 = 0.6 eV
To locate Potential for stopping (Vo) Formula: Vo = (E - Φ₀)/ e
Calculation:
Vo= 2 × 1.6 × 10^-19 – 0.6 × 1.6 × 10^-1 / 1.6 × 10-19
= 2 -0.6
= 1.4 V
1.4 V is the stopping potential.
To learn more about stopping potential from given link
https://brainly.com/question/13839503
#SPJ4
What i the velocity of the ice kater after
throwing the nowball? Diregard the friction
between the kate and the ice
Kinetic Friction, or Sliding Friction, is the friction between skates and ice. When two items slide past each other, this form of friction develops.
Sliding Friction is created when the skate blade passes through the ice. The beautiful curves are governed by the second law. Acceleration is required for a change in velocity, which includes both speed and direction. Because of the constantly changing direction, traveling in a circle at a constant speed includes acceleration. Because everyone is initially at rest, the system's linear momentum is zero. Because there is no external force acting on the system when the guy throws the ball, linear momentum must be conserved.
Learn more about velocity here-
https://brainly.com/question/18084516
#SPJ4
How does sonar detect underwater objects?
An acoustic signal or sound pulse is sent into the water by active sonar transducers. The sound pulse will bounce off an item if one is in the way of the sound pulse, sending a "echo" back to the sonar transducer.
Does sonar function submerged?SONAR is most useful underwater, although it also functions in the open air. The reason for this is that sound travels farther in water.
How does underwater sonar work to find submarines?Sonar devices use sound waves to penetrate the ocean and record the sound waves that are reflected back to display items below the surface. This is known as active sonar, which is a type of echolocation similar to that employed by bats. Similar technology exists in radar, but radio waves are used in it.
To know more about sonar visit :-
https://brainly.com/question/4955683
#SPJ4
Messi shoots a shot on goal with a speed of 200m/s.
A. What is its kinetic energy if the ball has a mass of 0.7kg?
B. How does its kinetic energy change if the speed is 180m/s
The kinetic energy of the ball when it has a mass of 0.7 kg is 14000J.
When the speed is 180 m/s its K.E. changes to 11340 J.
Calculate the kinetic energy of the following options?
A. Kinetic energy E = 1/2 [tex]mv^{2}[/tex]
mass (m) = 0.7 kg
speed (v) = 200 m/s
K.E = 1/2 (0.7) (200)^2
K.E = 1/2 (28000)
K.E = 14,000J
K.E = 14 x 10^3 J
The kinetic energy of the ball has a mass of 0.7 kg is 14 x [tex]10^{3}[/tex] J
B. The kinetic energy is directly proportional to the square of the speed or velocity. When the speed increases its kinetic energy also increases. When the speed decreases also its kinetic energy is decreases.
K.E. = 1/2 [tex]mv^{2}[/tex]
K.E. = 1/2 (0.7) (180)^2
K.E. = 11,340 J
So, the speed of the kinetic energy is decreased, the value of K.E. is also decreased.
To learn more about kinetic energy refer to:
https://brainly.com/question/25959744
#SPJ1
Why do we calculate frequency?
Frequency gives the number of unique purchases and monetary calculates the amount of money spent.
Frequency, in physics, is the number of waves that pass fixed point in unit time; also, the number of cycles or vibrations undergone during one unit of time by a body in periodic motion.
What is frequency?
The definition of frequency says that it is the number of complete cycles of a wave passing through a point per unit time.The SI unit of the frequency is Hertz (Hz).Frequency of a sine wave as the number of complete oscillations made by any wave element per unit time.A frequency is in periodic motion, it has gone through one cycle after passing through a series of events or positions and returning to its original state.To know more about frequency, click the link given below:
https://brainly.com/question/30053506
#SPJ4
Help me out please thank you
Answer:
Similarly, the law of conservation of energy states that the amount of energy is neither created nor destroyed. For example, when you roll a toy car down a ramp and it hits a wall, the energy is transferred from kinetic energy to potential energy.
Explanation: To be more clear, your answer would be A
Predict what happens to the mechanical advantage of a machine if friction is reduced through the use of oil or some other means.
A big machine is composed of several moving and stationary parts. Some of these parts are in a state of constant motion hence they periodically rub against each other.
Explain about mechanical advantage:The Mechanical Advantage (MA) of a machine is the ratio between the output force produced by the machine divided by the input force exerted on it:The MA is generally a number larger than 1, since machines are used to "multiply" the force applied.There are actually 2 values of the mechanical advantage for a machine:The Ideal Mechanical Advantage (IMA), which is the MA when there are no frictional force acting on the machine, and so when all the work done in input is transferred as energy in output The Actual Mechanical Advantage (AMA), which is the MA when taking into account the frictional forces, which cause a dissipation of part of the energy; so, not all the work done in input is transferred as energy in outputThe efficiency of a machine is defined as the ratio between the two:A machine cannot have an efficiency of 100% because there are always some frictional/resistive forces acting on the system, so part of the energy in input is always dissipated, and therefore AMA < IMA, and so the efficiency is not 100%.As we know that friction force is the resistive force due to relative motion of two surface. When one surface is moving relative to other surface then the motion is resisted by the interaction force between two surface which is known as friction force.To learn more about mechanical advantage refer to:
https://brainly.com/question/25984831
#SPJ1
Koby placed ½ teaspoon of baking soda into each of two identical glasses. He noticed the baking soda was lumpy, so he used a fork to break up the lumps. Why is it important to break up the lumps?
Answer:
because the lumps are just baking soda covered with whatever watery substance you used.
Explanation:
so pretty much inside the lumps is just a bunch of baking soda
Which of the following is the minimum amount of work done by a hydraulic lift to raise a 150-kg aluminum block 2.0 m vertically?
a. 300 J
b. 2940 J
c. 1470 J
d. 75 J
Important Formulas:
[tex]w=Fd[/tex]
[tex]F=ma[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
force(measured in newtons) = mass(measured in kg) * acceleration(measured in m/s^2)
__________________________________________________________
Given:
[tex]m=150kg[/tex]
[tex]d=2m[/tex]
[tex]a=9.8m/s^2[/tex] (acceleration due to gravity)
[tex]w=?[/tex]
__________________________________________________________
Finding force:
[tex]F=ma[/tex]
[tex]F=150\times9.8[/tex]
[tex]F=1470N[/tex]
__________________________________________________________
Finding work:
[tex]w=Fd[/tex]
[tex]w=1470\times2[/tex]
[tex]w=2940J[/tex]
__________________________________________________________
[tex]\fbox{Option B}[/tex]
A 18.3 kg rock, m, is on the edge of a 105.4 m cliff, h, as shown in the picture. Assume that air resistance is negligible. The rock falls from the cliff. What is its kinetic energy just before it strikes the ground?
18902.4 J kinetic energy just before it strikes the ground.
What is kinetic energy?The energy an item has as a result of motion is known as kinetic energy. A force must be applied to an item in order to accelerate it. We must put forth effort in order to apply a force. After the job is finished, energy is transferred to the item, which then moves at a new, constant speed.
Given that,
mass (m) = 18.3 kg
height (h) = 105.4 m
Thus, Potential energy (P.E) = mgh
or, P.E = (18.3) ×(9.8) ×(105.4)
or, P.E = 18902.4 J
Kinetic energy (K.E) = Potential energy (P.E)
or, Kinetic energy (K.E) = 18902.4 J
Thus, 18902.4 J kinetic energy needed just before it strikes the ground.
To know more about kinetic energy refer to:
https://brainly.com/question/8101588
#SPJ1