Answer:
An increase in pressure would cause less volume and vice versa. They are inversely proportional.
Explanation:
This is due to Boyle's Law (and because an increase in pressure would increase the force on the container, however, if it's a closed container, it would burst)
Feel free to mark it as brainliest :D
Find the horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40m/s
To Find :
The horizontal range of a projectile launched at 15 degrees to the horizontal with speed of 40 m/s.
Solution :
The horizontal range of a projectile is given by :
[tex]R = \dfrac{u^2 sin 2\theta}{g}[/tex] ( Here, g is acceleration due to gravity = 10 m/s² )
Putting all value in above equation :
[tex]R = \dfrac{40^2 \times sin (2 \times 15)}{10} \ m\\\\R = \dfrac{1600 \times 1}{2\times 10} \ m\\\\R = 80 \ m[/tex]
Therefore, the horizontal range of projectile is 80 m.
hydrogen iodide is not produced by the same method is for hydrogen chloride why with reaction
Using Phosphoric acid will work perfectly for producing Hydrogen halides because its not an Oxidizing agent. ...
Using an ionic chloride and Phosphoric acid
H3PO4 + NaCl ==> HCl + NaH2PO4
H3PO4 + NaI ==> HI + NaH2PO4
H2SO4 + NaCl ==> HCl + NaHSO4
This method(Using H2So4) will work for all hydrogen hydrogen halide except Hydrogen Iodide and Hydrogen Bromide.
The Sulphuric acid won't be useful for producing Hydrogen Iodide because its an OXIDIZING AGENT. Whist producing the Hydrogen Iodide... Some of the Iodide ions are oxidized to Iodine.
2I-² === I2 + 2e-
Which of the following statements is FALSE. Select one: A. Two of the statements are false. B. In the synthesis of aspirin, the main impurities are salicylic acid and acetic acid. C. Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin. D. In the analysis of aspirin, the greater the amount of salicylic acid impurity in the aspirin, the smaller the amount of NaOH needed for the hydrolysis of aspirin. E. If the crude aspirin is not entirely pure, the temperature range at which it melts will be larger than pure aspirin.
Answer:
Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin.
Explanation:
The presence of impurities in a sample lowers the melting point of the impure substance. Hence the melting point of an impure substance is always less than the melting point of the corresponding pure substance.
Bearing this in mind, the statement "Aspirin was purified in the lab by recrystallizing the crude aspirin. The melting point of the purified aspirin is expected to be lower than the melting point of crude aspirin." is found to be false since impure substances tend to have a slightly lower melting point than the pure substance, and a broader melting temperature range.
Which compounds are most likely ionic? compounds A and B O compounds B and C compounds C and D O compounds D and A
Answer:
compounds D and A
Explanation:
The ionic compound can conduct electricity therefore, the compounds A and D are most likely ionic. Therefore, option (4) is correct.
What are ionic compounds?Ionic compounds can be defined as crystalline solids produced by closely packed ions with opposite charges. The formation of an Ionic compound takes place when metal reacts with non-metal.
In ionic compounds, the ions of the compound are generally linked together by ionic bonds. The ions of an atom are formed by gaining or losing electrons in order to get the noble gas electronic configuration.
In a reaction, the metals are generally electropositive so they can lose electrons to complete their octet while non-metals will gain electrons from the metals to complete their octet.
Ionic compounds can conduct electricity in a molten state and aqueous solution because then they have free ions that can move from one place to another to conduct an electric current.
Learn more about ionic compounds, here:
brainly.com/question/17217225
#SPJ6
best way to hump girls
Answer:
When they're sleeping
Explanation:
After they've been drugged
g What is the relationship between the moles of the limiting reagent and the change in temperature (i.e. directly proportional or indirectly proportional)
Answer:
number of moles is inversely proportional to the Temperature
Explanation:
As we know
PV = nRT
where P is the pressure
V is the volume
n is the number of moles
R is the gas constant
and T is the temperature
If we see the equation, we can find that n is inversely proportional to the Temperature
5. Calculate the number of molecules of carbon tetrachloride in 0.32 mol of
carbon tetrachloride.
To Find :
The number of molecules of carbon tetrachloride in 0.32 mol of
carbon tetrachloride.
Solution :
We know, 1 mole of any element/compound contains [tex]6.022 \times 10^{23}[/tex] number of atoms/molecules.
So, Number of molecules in 0.32 mol are :
[tex]n = 0.32 \times 6.022 \times 10^{23}\\\\n = 1.93 \times 10^{23}[/tex]
Therefore, number of molecules of carbon tetrachloride in 0.32 mol of
carbon tetrachloride are [tex]1.93 \times 10^{23}[/tex].
Which point defect in its crystal units alters the density of a solid?
please please answer
Answer:
Schottky defect
Explanation:
Schottky defect in crystals units alters the density of a solid.
PLSS HELPP ME i dont knowww
Answer:
non polar. polar ionic substance
What is the molality of a solution containing 15 g NaCl dissolved in 50 g of water
Answer:
cdjkekendnekekekeknenwkwkwkwnrnrnrjejjwjwksnsjnrheifjfuufjeenenej
If the half-life of Carbon-14 is 5700 years, how many years would it take a sample to decay from 1 gram to 31.3 mg
Answer:
28500 years
Explanation:
Applying,
A = A'([tex]2^{x/y}[/tex])............... Equation 1
Where A = Original mass of Carbon-14, A' = Final mass of carbon-14 after decaying, x = total time, y = half-life.
From the question,
Given: A = 1 g, A' = 31.3 mg = 0.0313 g, y = 5700 years.
Substitute these values into equation 1
1 = 0.0313([tex]2^{x/5700}[/tex])
[tex]2^{x/5700}[/tex] = 1/0.0313
[tex]2^{x/5700}[/tex] = 31.95
[tex]2^{x/5700}[/tex] ≈ 32
[tex]2^{x/5700}[/tex] ≈ 2⁵
Equating the base and solve for x
x/5700 ≈ 5
x ≈ 5×5700
x ≈ 28500 years
calculate the molecular mass of sodium trioxocarbonate (iv) decahydrate. hints (H= 1, C=12, O=16, Na=23
Given :
A compound sodium trioxocarbonate (iv) decahydrate.
To Find :
The molecular mass of sodium trioxocarbonate (iv) decahydrate.
Solution :
We know, molecular formula of sodium trioxocarbonate (iv) decahydrate is :
Na₂CO₃.10H₂O
Now, we can calculate its molecular mass :
M = ( 2 × 23 ) + 12 + ( 3 × 16 ) + 10 × ( 1 × 2 + 16)
M = 46 + 12 + 48 + ( 10 × 18 )
M = 286 gram/mol
Hence, this is the required solution.
10. The lithium-ion in a lithium-ion battery moves from one side to the other by
A. moving through the cathode.
B. moving through the anode.
C. passing through the separator.
D. passing through the device.
Please help this is due tonight
El osmio es un metal sólido que tiene una densidad
de 22 600 kg/m?, ¿qué volumen ocuparán 100 g de
este metal?
Respuesta:
4.42 × 10⁻⁶ m³
Explicación:
Paso 1: Información provista
Densidad del osmio (ρ): 22600 kg/m³Masa de osmio (m): 100 gPaso 2: Convertir 100 g a kilogramos
Usaremos el factor de conversion 1 kg = 1000 g.
100 g × 1 kg/1000 g = 0.100 kg
Paso 3: Calcular el volumen ocupado por 0.100 kg de osmio
La densidad es una propiedad intensiva, igual al cociente entre la masa y el volumen.
ρ = m/V
V = m/ρ
V = 0.100 kg / (22600 kg/m³) = 4.42 × 10⁻⁶ m³
A water bottle is cooled to -115c. What is the new pressure
Answer:
129
Explanation:
A 45-year-old woman comes to a clinic with complaints of morning stiffness in her ankle joints, worse on rising in the morning and improving during the day. Her discomfort is responsive to aspirin. She has also been fatigued and weak. During the last week, she has noticed that her wrist and ankle joints on both sides of her body are also painful and swollen. Blood is drawn to test for rheumatoid factor and antinuclear antibody. Synovial fluid is aspirated and analyzed. Results from analysis of the synovial fluid rule out crystal deposition diseases, such as gout and pseudogout, and no infectious microorganisms are seen.
Required:
a. What can be the possible cause of a false-positive RF assay?
b. Do the patient's clinical symptoms and laboratory results support a diagnosis 5. If so, what diagnosis would be the first choice, and why?
Answer:
In all the patients with rheumatoid arthritis RF is not present. It can also be witnessed in patients with conditions like hepatitis, bacterial endocarditis, and tuberculosis. Some of the reasons that can also produce false-positive results for RF assay are lipemic, hemolyzed, or heavily contaminated serum, other rheumatic diseases like systemic lupus erythematous, reading test results post the specified time of two minutes, and due to some of the chronic infectious diseases like hepatitis, tuberculosis, and syphilis.
b. The symptoms of the oatient like inflammation and pain in joints and the results of the lab indicate that the synovial fluid is drying and formation of crystal is taking place. These are the conditions that suggests the existence of rheumatoid arthritis.
c. In the given case, the first choice diagnosis would be the blood test that would show the presence of anti-CCP antibodies and the drying of synovial fluid. The presence of anti-CCP antibodies results in wear and tear in the joints, thus showing the diseased conditions.
What is the temperature of 0.750 mol of a gas stored in a 6,050 mL cylinder al 221 atm?
atm
Use and
molek
5.24K
138 K
246 K
Answer:
T = 246 K
Explanation:
Given that,
Number of moles, n = 0.750 mol
The volume of the cylinder, V = 6850 mL = 6.85 L
Pressure of the gas, P = 2.21 atm
We need to find the temperature of the gas stored in the cylinder. We know that,
PV= nRT
Where
R is gas constant
T is temperature
So,
[tex]T=\dfrac{PV}{nR}\\\\T=\dfrac{2.21\times 6.85}{0.75\times 0.0821}\\T=245.85\ K[/tex]
or
T = 246 K
So, the temperature of the gas is equal to 246 K.
How many grams are in 0.375 mol LiBr? (MM LiBr=86.85 g/mol)
O 32.6 g
O 0.00315 g
O 0043 g
O 86.8 g
Answer:
32.57g
Explanation:
mass = mole x molar mass
mass of LiBr = 0.375 x 86.85
mass = 32.57g
4. Suppose in the first part of the experiment you did not heat strong enough to
decompose the potassium chlorate, how would this affect your result?
when you strongly heat the potassium chlorate it leaves oxygen if you'll not heat it strongly to decompose it the oxygen would not release and the compound will remain thermally unstable.
Heating of Potassium Chlorate results into decomposition of Potassium Chloride and Oxygen gas.
When KClO₃ is heated strongly, it breaks down, releasing oxygen gas and leaving behind a thermally stable (i.e., heat-insensitive) solid residue of an ionic potassium compound.
If enough heat is not provided to potassium chlorate then it will not decompose into its substituent products and also some of the potassium chloride product splattered out of the crucible during the heating process.
Learn more:
brainly.com/question/12959023
How many isomers are there with the following descriptions? Alcohols with the formula Answer Two Bromoalkanes with the formula Answer
Answer:
Three isomers
Isomer I CH3-CHOH - CH3
Isomer 2 CH2OH-CH2-CH3
Isomer 3 CH3-CH2-CH2OH
Explanation:
Complete question
How many isomers are there with the following descriptions?
a) Alcohol with formula C3H8O
Solution
There are total 3 carbon atoms in this alcohol. Hence, there will be three isomers of Alcohol with formula C3H8O .
The three isomers will comprise of alcohol group (OH) attached to the three carbon atoms one by one.
Isomer I CH3-CHOH - CH3
Isomer 2 CH2OH-CH2-CH3
Isomer 3 CH3-CH2-CH2OH
Question 18 (Multiple Choice Worth 2 points)
(12.02 LC)
What type of adaptation relates to the stages of growth and reproduction of plants?
Inherited trait
O Life cycle difference
O Learned behavior
O Physical characteristic
Answer:
the answer should be Life Cicle Difference.
Answer: Option (D) Is the correct Life cycle difference
Explanation: Hope it helps!
Good luck!!!
If a point is chosen inside the square, what
is the probability that it will also be inside the
circle?
1
Point to be present exactly at midway between center and circumference of circle (let’s say radius = r) should lie at circumference of circle of radius r/2.
Favorable outcome = 2*pi*r/2
Total outcome = Point can be anywhere inside the circle of radius r = Area of circle = pi * r * r
Probability = (2*pi*r/2) / pi * r* r = 1/r.
Not completely sure about correctness . Waiting for comments to verify.
4. Which should be done after a volcanic eruption?
A. Go to your neighbor.
B. Prepare your emergency kit.
C. Ignore what is happening around.
D. Stay in the evacuation center until it is safe to return.
5. Which is NOT true about volcanic preparedness?
A. Make a plan.
B. Prepare an emergency kit.
C. Cover your nose with a damp cloth.
D. Do not follow the instructions of the authorities.
Answer:
4. D sounds like the best option.
5. D is the correct answer.
Explanation:
You're Welcome
How many total carbon atoms are in the structure 2 methyl, 3, 4 diethyl decane?
12
15
14
10
Answer:B
15 carbon atoms
What is the pH if the [H+] concentration is 3 x10^-13
Answer:
pH = 12.52
Explanation:
Given that,
The [H+] concentration is [tex]3\times 10^{-13}[/tex].
We need to find its pH.
We know that, the definition of pH is as follows :
[tex]pH=-log[H^+][/tex]
Put all the values,
[tex]pH=-log[3\times 10^{-13}]\\\\pH=12.52[/tex]
So, the pH is 12.52.
Difference between brain and spinal cord
Pls help
What are 3 different ways we can preserve our ecosystem and what makes your 3 ways effective?
Answer:
1. Stop throwing trash and bottles in lakes because it can have our animals live longer and not have issues
2. Reducing the number of bags you use from the store because they can end up being on the ground and cause plenty of damage around us
3. probably trying not to having fires because there is alot of problems that are happening like the wildfires in californa which is leading to our animals and trees dying
hope this helps
have a good day :)
Explanation:
In the reaction between CH4 and O2, if 25.0 g of CO2 are produced, what is the minimum amount of each reactant needed?
PLS HELP
Answer:
25 gram
Explanation:
the minimum amount of the reactant needed is equal to the mass of the product because of the law of conservation of mass ok
Los catalizadores sirven para detener una reacción química ?
Answer:
si
Explanation:
Los catalizadores son sustancias que aceleran una reacción química, proporcionando una ruta alternativa para romper y formar nuevos enlaces entre átomos. Su importancia reside en el hecho de que este nuevo camino requiere menos energía que el original, lo que facilita el proceso.