Answer:
See below ~
Explanation:
An object will sink in water when its density is greater than that of water, which is 1 g/cm³.
Volume of the box is 1331 cm³. (11³)
Maximum mass of sand will be 1331 g. [because 1331/1331 = 1 g/cm³]
Volume of sand = Mass of sand / Density of sandVolume (sand) = 1331/3.5Volume (sand) = 380.29 cm³If the volume of sand is greater than 380.29 cm³, the box will sink in water.
What will happen to the force between 2 charged objects if the mass of one of the charges is doubled and the distance between them is double?
A machine which has an energy loss of 10% will have efficiency of
Answer:
90%
Explanation:
if you lose 10% of a 100 you get 90
What is an example of an analogue signal?
Examples of analog signals are Human voice, Thermometer, Analog phones etc.
What is signal?Signal is defined as an electromagnetic wave that carries information through a medium. In this, the data is converted into electromagnetic signal which may be analog or digital and then sent from sender to receiver.
Signal which are continuous as time varies are analog signals.
Thus, examples of analog signals are Human voice, Thermometer, Analog phones etc.
Learn more about signal.
https://brainly.com/question/14699772
#SPJ1
Answer:
Examples of analog signals are Human voice, Thermometer, Analog phones etc. Examples of digital signals are Computers, Digital Phones, Digital pens, etc.
The speed of light traveling through an unknown material is 1.98×108 m/s. Given that the speed of light in a vacuum is 3.00×108 m/s, what is the dielectric constant of the unknown material?
The dielectric constant of the unknown material is 2.3.
What is dielectric constant?Dielectric constant is referred as a relative permittivity or amount of charge required to produce one unit of electric flux in a given medium.
Given the speed of light in vacuum c =3 x 10⁸ m/s and the speed of light through an unknown material v = 1.98 x 10⁸ m/s.
The dielectric constant is related to the velocity by the following relation,
v = c/√K
Rearranging for dielectric constant, we get
K = (c/v)²
Substitute the value into the expression ,we get
K =(3 x 10⁸ / 1.98 x 10⁸)²
K = 2.3
Thus, the dielectric constant of the unknown material is 2.3.
Learn more about dielectric constant.
https://brainly.com/question/13265076
#SPJ1
i just can't get around physics T^T this is the last question i promise, I'd really appreciate the help <3
question; the work one by friction force to stop a car of mass 1000 kg moves with velocity 72km/h is ..........
a) 72 x 10³ J
b) 2 x 10⁴ J
c) 2 x 10⁵ J
d) 4 x 10⁵ J
an explanation for future reference would be great, thank you in advance!
Use the work-energy theorem. The total work W performed on the car as it it slows to a stop is equal to the change in the car's kinetic energy ∆K. So
W = ∆K
W = 0 - 1/2 (1000 kg) (72 km/h)²
W = - (500 kg) (20 m/s)²
W = - 200,000 J = -2 × 10⁵ J
The closest answer would be C, but friction opposes the car's motion so the work would be negative.
On an ice skating rink, a girl of mass 50 kg stands stationary, face to face with a boy of mass 80 kg. the children push off of one another, and the boy moves away with a velocity of 3 m/s. what is the final velocity of the girl? –1.9 m/s 1.9 m/s –4.8 m/s 4.8 m/s
The final velocity of the girl after the collision is determined as -4.8 m/s.
Final velocity of the girl
The final velocity of the girl is determined from the principle of conservation of linear momentum.
m1u1 + m2u2 = m1v1 + m2v2
50(0) + 80(0) = 50(v1) + 80(3)
0 = 50v1 + 240
50v1 = -240
v1 = -240/50
v1 = -4.8 m/s
Thus, the final velocity of the girl after the collision is determined as -4.8 m/s.
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
#SPJ4
What sport does not require a high level of fitness
Can someone please answer this, ill give you brainliest Would be very appreciated.
Water cycle basically involves the change of water into liquid to vapour and again to liquid states through a cyclic manner .
The answers are
EvaporationTranspirationCondensationprecipitationrunoffseapageground waterA photon has an energy of 2.88 x 10^-18 j. convert this energy into ev.
Answer:
E = V Q voltage * charge
Since the charge on an electron is e = 1.6E-19 coulombs
the energy of 1 eV is 1.6E-19 joules
E = 2.88E-18 joules / 1.6E-19 joules/electron volt
E = 18 eV
The magnetic field 0.225 m from a
wire is 4.29 x 10-7 t. how much
current is flowing through the wire?
need asap please will give brainiest
Answer:
i = 0.483 A
Explanation:
B = [tex]\frac{U.i}{2pi*r}[/tex]
So, here the r is 0.225 m
The Magnetic field is 4.29 x [tex]10^{-7}[/tex] t
U. = 4π x [tex]10^{-7}[/tex] x i
4.29 x [tex]10^{-7}[/tex] = (4π x [tex]10^{-7}[/tex] x i) / (2π * 0.225)
Cutting [tex]10^{-7}[/tex]
4.29 = [tex]\frac{4π * i}{2π * 0.225}[/tex]
4π and 2π canceled, left with 2
4.29 = [tex]\frac{2i}{0.225}[/tex]
4.29*0.225 = 2i
0.96525 = 2i
i = [tex]\frac{0.96525}{2}[/tex]
i = 0.482625 A
Rounding to 3 digits after decimal, we get
∴ i = 0.483 A
Take the mechanical equivalent of heat as 4 J/cal. A 10-g bullet moving at 2000 m/s plunges
into 1 kg of paraffin wax (specific heat 0.7 cal/g ·C◦). The wax was initially at 20◦ C. Assuming
that all the bullet’s energy heats the wax, its final temperature (in ◦ C) is:
A. 20.14
B. 23.5
C. 20.006
D. 27.1
E. 30.23
Assuming that all the bullet’s energy heats the paraffin, its final temperature is 27.1 degree C. The correct option is D.
What is temperature?Temperature is the degree of hotness and coldness of the material.
The energy of the bullet E = 1/2 mv²
E = 1/2 x 10 x 10⁻³ x (2000)²
E = 2 x 10⁴ J
This heat is used in heating the paraffin
E = m x c ΔT = m x c (Tfinal -Tinitial)
2 x 10⁴ J = 1 x 2.8 x 10³ x (Tfinal -20)
Tfinal = 27.1°C
Thus, the final temperature is 27.1 degree C. The correct option is D.
Learn more about temperature.
https://brainly.com/question/15267055
#SPJ1
Show the molecular formula and electron structure of the simplest compound that forms with only carbon and hydrogen atoms.
The simplest compound of hydrocarbon is methane
The formula is CH_4It belongs to alkane group and has single bonds.The electron structure attached
What does a capacitor do in a circuit?
A boy pushes a toy car along the floor at a steady speed. Are the forces on it balanced
or unbalanced?
Answer:
the forces are balanced :)
Explanation:
a satellite moves in a circular orbit around the earth at a speed of 5000 ms. determine the satellites altitude above the earths surface
Answer:
G M m / R^2 = m v^2 / R centripetal force = force of attraction
R = G M / v^2 radius of satellite orbit
R = 6.67E-11 * 5.98E24 / 5000^2
R = 6.67 * 5.98 / 25 * 10^7 m = 1.60 * 107 m = 16 * 10^6 m
Radius of earth = 6.37 * 10^6 m
H = R - r = (16 - 6.4) * 10^6 m = 9.6 * 10^6 m
What is the speed of light in quartz
Answer:
Approximately 2.06⋅108 meters per second.
Explanation:
______ is how something feels.
Color
Volume
Length
Temperature
Texture
Answer:
Texture is how something feels.
True or false: Mass is a scalar quantity. * (10 Points)
Answer: True
Explanation:
A scalar quantity is those quantities that only have magnitude and no direction. Therefore the value doesn't change with direction.
A certain light truck can go around a flat curve having a radius of 150 m with a maximum speed of 32.5 m/s. With what maximum speed can it go around a curve having a radius of 66.0 m
Answer:
Approximately [tex]21.6\; {\rm m\cdot s^{-1}}[/tex], assuming that the coefficient of kinetic friction between the tires and the ground stays the same.
Explanation:
Let [tex]\mu_{k}[/tex] denote the coefficient of kinetic friction between the tires and the ground.
Let [tex]m[/tex] denote the mass of the truck. Let [tex]g[/tex] denote the gravitational field strength. The weight of this truck would be [tex]m\, g[/tex]. Since the curve is flat, the magnitude of the normal force [tex]F_\text{normal}[/tex] between the truck and the ground would also be [tex]m\, g\![/tex].
Let [tex]v = 32.5\; {\rm m\cdot s^{-1}}[/tex] denote the speed at which the truck goes around the curve with a radius of [tex]150\; {\rm m}[/tex]. The (horizontal) centripetal acceleration of the truck would be:
[tex]\displaystyle a = \frac{v^{2}}{r}[/tex].
The horizontal net force on the truck (of mass [tex]m[/tex]) would need to be exactly:
[tex]\displaystyle F_\text{net} = m\, a = \frac{m\, v^{2}}{r}[/tex].
The friction between the tires of the truck and the ground is the only horizontal force on the truck. Thus, this friction would need to supply the entirety of this horizontal net force:
[tex]\displaystyle F_\text{friction} = F_\text{net} = \frac{m\, v^{2}}{r}[/tex].
Notice that increasing [tex]v[/tex] would require an increase in the kinetic friction between the truck, [tex]F_\text{friction}[/tex]. However, since [tex]F_\text{friction}\![/tex] is at most [tex]\mu_{k}\, F_\text{normal}[/tex] (which is equal to [tex]\mu_{k}\, m\, g[/tex]):
[tex]\begin{aligned}\frac{m\, v^{2}}{r} &= F_\text{friction} \\ & \le \mu_{k}\, F_\text{normal} \\ &= \mu_{k}\, m\, g\end{aligned}[/tex].
Therefore, when the radius of the curve is [tex]r^{\prime}[/tex], the maximum velocity of this truck would be:
[tex]\begin{aligned}v^{\prime} &= \sqrt{\mu_{k}\, g\, r^{\prime}}\end{aligned}[/tex].
Likewise, it is possible to express [tex]\mu_{k}[/tex] in terms of [tex]r[/tex], [tex]g[/tex], and max speed [tex]v[/tex]:
[tex]\displaystyle \mu_{k} = \frac{v^{2}}{r\, g}[/tex].
Substitute this expression for [tex]\mu_{k}[/tex] back into the expression for [tex]v^{\prime}[/tex]:
[tex]\begin{aligned}v^{\prime} &= \sqrt{\mu_{k}\, g\, r^{\prime}} \\ &= \sqrt{\frac{v^{2}}{r\, g}\, g\, r^{\prime}} \\ &= \sqrt{v^{2}\, \frac{r^{\prime}}{r}}\end{aligned}[/tex].
Given that [tex]v = 32.5\; {\rm m\cdot s^{-1}}[/tex], [tex]r = 150\; {\rm m}[/tex], and [tex]r^{\prime} = 66.0\; {\rm m}[/tex]:
[tex]\begin{aligned}v^{\prime} &= \sqrt{v^{2}\, \frac{r^{\prime}}{r}} \\ &= \sqrt{(32.5\; {\rm m\cdot s^{-1}})^{2} \times \frac{66.0\; {\rm m}}{150\; {\rm m}}} \\ &\approx 21.6\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].
3
What increase in temperature will result if 225.0 g of copper absorbs 5000 J of
heat energy? The specific heat of copper is 0.385 J/g °C
Calculate: Q=m XCXAT
(2 points)
57.7 °C
433.125 °C
274.6 °C
22.2 °C
The increase in temperature that will result if 225.0 g of copper absorbs 5000 J of heat energy is 57.72°C.
How to calculate temperature change?The temperature change of a substance can be calculated using the following formula:
Q = m × c × ∆T
Where;
Q = quantity of heat absorbed or releasedm = mass of substancec = specific heat capacity∆T = change in temperature5000 = 225 × 0.385 × ∆T
5000 = 86.63∆T
∆T = 5000/86.63
∆T = 57.72°C
Therefore, the increase in temperature that will result if 225.0 g of copper absorbs 5000 J of heat energy is 57.72°C.
Learn more about temperature change at: https://brainly.com/question/11464844
#SPJ1
The sun will spend most of its lifetime in which stage?.
What are the potential advantages and disadvantages of a major shift from the hard or traditional path of energy development to the soft or visionary path
Answer: Advantages of following the soft path, the argument here is alternative sources of power such as hydropower, geothermal energy , wind energy , and photovoltaic cells must be developed. This provides a alternative source to remain in a healthy environment and also function as the society we currently live in using the hard path. Disadvantages of following the hard path result with future generations fearing over the irreversible damage of climate change and the damage done to our atmosphere. The hard path argue that we should continue to operate in the future as we have in the past, except more efficiently. This is close to impossible and will only continue the negative effects the hard path( the path we have been following) results in. The major shift determines the outcome of this world, the futures worries or reliefs and ultimately the survival of humans.
Which layer of the sun can easily be viewed by visible light?.
if both the mass and velocity of a moving object are doubled, how will the objects momentum change
Answer:
The momentum will quadruple
Explanation:
Original momentum
momen = mv
now increase both
momen = 2m * 2v = 4 mv <====== the momentum has quadrupled
6. What quantity does the gradient of the distance - time graph represent? Justify your answer.
Answer:
speed
Explanation:
In a distance-time graph, the gradient of the line is equal to the speed of the object. The greater the gradient (and the steeper the line) the faster the object is moving.
Which of the following is correct for speed?
A vector
Depends on Distance
Unit is a meter/second (m/s)
A vector
Depends on Displacement
Unit is a meter/second (m/s)
A scalar
Depends on Distance
Unit is a meter/second (m/s)
A scalar
A
Depends on Displacement
Unit is a meter/second (m/s)
Answer:
Speed is a "scalar" quantity
(C) is the correct answer
An object could travel at 10 m/s to some point and then return to the origin at 10 m/s for an average speed of 10 m/s, however it's displacement over that time would be zero for a net velocity of zero.
What is the radius of a cone with a volume of 96π cubic inches and a height of 18 inches? 1. rewrite the formula using the base area: 2. substitute the values into formula: 3. simplify the right side: 4. undo the multiplication of 6π: 5. undo the square: what is the radius of the cone? inches v = one-third pi r squared h. 96 pi = one-third pi r squared (18). 96 pi = 6 pi r squared. 16 = r squared. startroot 16 endroot = startroot r squared endroot.
Based on the calculations, the radius of this cone is equal to 4 inches.
How to calculate the radius of a cone?Mathematically, the volume of a cone is calculated by using this formula:
V = 1/3 × r²h
Where:
h is the height.r is the radius.Making r the subject of formula, we have:
r = √(3V/πh)
Substituting the given parameters into the formula, we have;
r = √(3 × 96π/π × 18)
r = √(288/18)
r = √16
Radius, r = 4 inches.
Read more on radius here: https://brainly.com/question/10584345
#SPJ4
PLEASE HELP ME I ATTACHED A SCREEN SHOT PLS SOLVE ASAP
Answer:
B. Negative acceleration means this car is slowing down.
Explanation:
for the other screenshot
Average acceleration = change in velocity /change in time.
[a = ∆V/∆t] —this the formula.
NOTE:
u = initial velocity (velocity it started with)
v = final velocity (velocity it ended with)
t = time {the time you were given)
a = acceleration.
listing out our givens:
u =o —(the unit is m/s)
v = 40 —(the unit is also m/s)
t = 0.08 —(the unit is s) "s" means second(s).
Soo
a = 40-0 / 0.08 = 500 m/s² ( unit for velocity is m/s²)
( Remember when using the formula we subtract the initial from the final velocity.........I mean we remove the initial from final) if not you will get a negative answer or wrong answer).
also note: final velocity is always bigger in value than initial velocity EXCEPT it is in deceleration meaning for example a car that was speeding is gradually stopping then initial (the one it started with) will be bigger than the one it ended with (because as it gradually stops the speed reduces).
VELOCITY is speed in a specified direction.
you're super free to ask any questions
Good luck ✅.
It would be really helpful if someone answered this.
[tex]\qquad\qquad\huge\underline{{\sf Answer}}[/tex]
According to first law of reflection, we know that :
Angle made by the incident ray and normal [ i.e angle of incidence ] is always equal to Angle made by the reflected ray and normal [ i.e Angle of reflection ]
Therefore, we can say that the missing angle (angle of reflection) has the same value as the angle of incidence which is equal to 45°
Please read the statement through to understand the procedure ~
The long structure of small intestine is accommodated in small space within our body. Comment.