The wave length of first line of Lyman series is 121.5 nm in Ultraviolet radiation.
The wave length of first line of Lyman series is
1/λ = R (1/1² - 1/2²) = 1.097 × [tex]10^{7}[/tex](1 - 1/4)
λ = 121.5 nm
b) Ultraviolet.
Sunlight and man-made sources, such tanning beds, both release non-ionizing radiation known as ultraviolet radiation. It can be risky to one's health even if it offers some advantages to humans, such as the production of vitamin D. UV radiation from the sun is defended against by broad-spectrum sunscreen. Most UVA radiation reaches the surface of the Earth; the atmosphere does nothing to block these rays. In addition to causing eye damage and skin aging, UVA radiation can weaken your body's immune system. To destroy bacteria, produce luminous effects, cure inks and resins, cure suntan lotion, cure inks and resins, and cure inks and resins, UV radiation is widely utilized in industrial processes as well as in medical and dental services. Various UV applications call for varied UV wavelengths and intensities
Learn more about Ultraviolet radiation here:
https://brainly.com/question/14663819
#SPJ4
Why does sonar only work in water?
In comparison to air, sound travels through water far more quickly, allowing you to hear distant sounds almost instantly. Additionally, measuring the doppler effect by sound rather than radio is simpler. In comparison to air, sound travels through water far more quickly, allowing you to hear distant sounds almost instantly
Why is it that sonar performs better in water?Sound waves are used by sonar to "see" in the water.
Additionally, measuring the doppler effect by sound rather than radio is simpler?The ocean may be explored and mapped with the use of sonar, which stands for Sound Navigation and Ranging. This is because sound waves travel further under water than radar and light waves.
To know more about sonar only work in water visit :-
https://brainly.com/question/21728248
#SPJ4
What's an example of negative reinforcement?
An example of negative reinforcement is removing an unpleasant stimulus in order to increase a desired behavior. For example, if a child is misbehaving in class and the teacher takes away their phone as a consequence, the child is more likely to stop misbehaving in order to get their phone back.
Negative reinforcement is a behavior modification technique in which an unpleasant stimulus is removed in order to increase a desired behavior. It is one of the four quadrants of operant conditioning, along with positive reinforcement, punishment, and extinction. An example of negative reinforcement is taking away a child's phone if they are misbehaving in class. By removing the phone, the child is more likely to stop misbehaving in order to get the phone back. It can also be used for animals, such as a dog that is barking too much. The owner can take away its food bowl if it continues to bark and the dog will be more likely to stop barking in order to get its food bowl back. Negative reinforcement is used to increase the desired behavior, but it is important to ensure that the unpleasant stimuli are removed in a humane way.
Learn more about desired behavior here
https://brainly.com/question/29870786
#SPJ4
In order to determine causal effects between variables, researchers must use. a. Correlational designs b. Case studies O c Experimental designs O d. All of the above
Option a; Correlational designs causal effects between variables, researchers must use.
Correlational research's objectives are to identify relationships between variables and to make it possible to predict the future based on the past. It's possible that one of two variables is a cause and the other is an effect if there is a correlation between them. But due to the correlational research methodology, it is impossible to distinguish between the two. To be safe, researchers avoid deriving causal inferences from Correlational designs. Correlational study involves monitoring two variables and looking at how they relate to one another without changing an independent variable. Correlation may not imply causation. An analysis of correlations between two or more variables is a type of research design.
Learn more about Correlational designs here:
https://brainly.com/question/17237942
#SPJ4
A boat on a river heads North East at a speed of 50 m/s at an angle of 35 degrees. What is the velocity's horizontal component?
The horizontal component of the boat's velocity is 40.96 m/s.
What is the horizontal component of the boat's speed?The horizontal component of the boat's velocity is the velocity of the boat along the horizontal direction or x - axis of the boat's motion.
The magnitude of the horizontal component of the boat's velocity is calculated as follows;
Vx = V cos (θ)
where;
V is the speed of the boatθ is the direction of the boat's speedVx = 50 m/s x cos (35)
Vx = 40.96 m/s
Thus, the horizontal component of the boat's velocity is a function of the initial velocity and the direction of the velocity.
Learn more about horizontal component of velocity here: https://brainly.com/question/24949996
#SPJ1
What is called a wavelength Mcq with answers?
The wavelength of a wave is the distance or length between its two subsequent crests or troughs.
What do you mean by wavelength?A wave's wavelength gives information about its length. The wavelength is the distance between the "crest" (top) of one wave and the crest of the following wave. The wavelength can also be determined by measuring from one wave's "trough" (bottom) to the following wave's "trough," with the same results.
Why is it known as a wavelength?Radio waves, light waves, and infrared (heat) waves are examples of electromagnetic radiation that flow through space in distinct patterns. Every wave is a specific size and shape. The distance between peaks is referred to as the "wavelength" (high points).
To know more about wavelength visit:
https://brainly.com/question/7143261
#SPJ4
How do you calculate the wavelength frequency and energy?
Answer:
Wavelength = c/f
Frequency = c/wavelength
Energy = mass * [tex]c^2[/tex] [[tex]e = mc^2[/tex]]
Explanation:
c is the speed of light constant -> [tex]3 * 10^8[/tex]
f is the frequency of the wave
What principle is responsible for light spreading as it passes through an?
Diffraction of light, as it is used to describe light, occurs more explicitly when a light wave passes by a corner or via an opening or slit that is physically smaller than the wavelength of that light, if not even smaller.
What principle causes light to travel through two tiny apertures and leave behind alternating bands of light and darkness?The intensity pattern that appears on the lit screen is determined by the superposition principle. When the difference in pathways from the two slits to a location on the screen equals an integral number of wavelengths (0,, 2,...), constructive interference takes place.
Which of the following characteristics of light spreads out light as it enters an object's opening?Light passing through an object causes a little bending known as diffraction. the perimeter of anything. The degree of bending is influenced by the wavelength of light's size in relation to the opening's size.
To know more about light spreading visit :-
https://brainly.com/question/1832599
#SPJ4
what is the distance from eart's center to a point outside earth's center where the gravitational acceleration a due to earth is 1/10 of its value from surface
The distance of point where gravitational acceleration a due to earth is 1/10 of its value from surface is 7436.8km.
We know that value of acceleration due to gravity at surface of earth is given by the formula g=GM/r²
where G is the earth's gravitational constant, M is the mass of earth and r is the distance between center and surface of earth.
Now,when we consider a point outside the surface of earth as h then value of acceleration due to gravity is =GM / (r+h)²
Now,we are given that value of acceleration due to gravity is 1/10 to the value at surface
∴GM / (r+h)²=(1/10) × (GM/r²)
=>r²/(r+h)² = 1/10
=>r/(r+h)= √(1/10)
=>r/(r+h)= 1/√10
On further solving,we get
=>√10 ×r=r+h
=>r×(√10-1)=h
Since this point is from center of earth and we need to find point from surface,there distance of point is =h-r=r×(√10-1)-r=r×(√10-2)=1.162r
Now,we know that radius of earth is 6400km
So,on putting =1.162r=1.162×6400=7436.8Km
Hence,distance of point from surface of earth is 7436.8km.
To know more about gravitational acceleration, visit here:
https://brainly.com/question/13769294
#SPJ4
(Complete question) is:
what is the distance from earth's center to a point outside earth's center where the gravitational acceleration a due to earth is 1/10 of its value from surface of earth.
someone answer this question pls
Answer:
D by plane
Explanation:
by car is 64 h is not less day the same for the truck and ship is very long
by train is impossible the train Srinagar-Kerala not exist
Is only possible by plane
A body falls freely from rest on Earth (g= - 10 m/s) 1. The displacement at t = 3 sis -45 m 2. The time for it to reach a speed of 25 m/s is I $ 3. The time to fall 320 m is 8 s. 4. The speed after falling 80 m is m/s. An object is thrown downward with an initial velocity of -20 m/s on Earth 5. The acceleration of the object after 1 s is -10 m m 6. The object's displacement after 4 sis -120 7. The time required to reach a speed of 50 misis -2.5 8. The velocity after falling 105.8 mis mis
1. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values, we get d = -1/2 (-10 m/s) (3 s)^2 + 0 m/s (3 s) + 0 m = -45 m.
2. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). Plugging in the values and setting v = 25 m/s, we get 25 m/s = (-10 m/s)t + 0 m/s. Solving for t, we get t = 2.5 s.
3. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values and setting d = -320 m, we get -320 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 8 s.
4. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). To find the speed after falling 80 m, we need to find the time t that corresponds to this displacement. We can use the formula for displacement to find t: d = -1/2 gt^2 + vt + d0. Plugging in the values and setting d = -80 m, we get -80 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 2 s. Plugging this value of t back into the formula for speed, we get v = (-10 m/s) (2 s) + 0 m/s = -20 m/s.
5. The acceleration of an object is given by the formula a = (vf - vi)/t, where vf is the final velocity, vi is the initial velocity, and t is the time elapsed. In this case, the initial velocity is -20 m/s and the time elapsed is 1 s. The final velocity is not given, so we cannot use this formula to find the acceleration.
6. The displacement of an object with constant acceleration is given by the formula d = 1/2 at^2 + vt + d0, where a is the acceleration, v is the initial velocity, t is the time elapsed, and d0 is the initial displacement. In this case, the acceleration is -10 m/s^2, the initial velocity is -20 m/s, the time elapsed is 4 s.
What is speed?Speed is a measure of how fast an object is moving. It is defined as the distance an object travels per unit of time. In equation form, speed is represented by the letter v and is equal to the distance d traveled divided by the time elapsed t: v = d/t. The unit of speed is typically meters per second (m/s) or kilometers per hour (km/h). For example, if a car travels a distance of 200 meters in 10 seconds, its speed is v = 200 m / 10 s = 20 m/s.
Therefore, the correct answer is as given above
learn more about speed: https://brainly.com/question/13943409
#SPJ1
1. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values, we get d = -1/2 (-10 m/s) (3 s)^2 + 0 m/s (3 s) + 0 m = -45 m.
2. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). Plugging in the values and setting v = 25 m/s, we get 25 m/s = (-10 m/s)t + 0 m/s. Solving for t, we get t = 2.5 s.
3. The displacement of a body falling freely from rest at time t seconds is given by the formula d = -1/2 gt^2 + vt + d0, where g is the acceleration due to gravity (in this case, -10 m/s), v is the initial velocity (in this case, 0 m/s), and d0 is the initial displacement (in this case, 0 m). Plugging in the values and setting d = -320 m, we get -320 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 8 s.
4. The speed of a body falling freely from rest at time t seconds is given by the formula v = gt + v0, where g is the acceleration due to gravity (in this case, -10 m/s) and v0 is the initial velocity (in this case, 0 m/s). To find the speed after falling 80 m, we need to find the time t that corresponds to this displacement. We can use the formula for displacement to find t: d = -1/2 gt^2 + vt + d0. Plugging in the values and setting d = -80 m, we get -80 m = -1/2 (-10 m/s) t^2 + 0 m/s t + 0 m. Solving for t, we get t = 2 s. Plugging this value of t back into the formula for speed, we get v = (-10 m/s) (2 s) + 0 m/s = -20 m/s.
5. The acceleration of an object is given by the formula a = (vf - vi)/t, where vf is the final velocity, vi is the initial velocity, and t is the time elapsed. In this case, the initial velocity is -20 m/s and the time elapsed is 1 s. The final velocity is not given, so we cannot use this formula to find the acceleration.
6. The displacement of an object with constant acceleration is given by the formula d = 1/2 at^2 + vt + d0, where a is the acceleration, v is the initial velocity, t is the time elapsed, and d0 is the initial displacement. In this case, the acceleration is -10 m/s^2, the initial velocity is -20 m/s, the time elapsed is 4 s.
What is speed?
Speed is a measure of how fast an object is moving. It is defined as the distance an object travels per unit of time. In equation form, speed is represented by the letter v and is equal to the distance d traveled divided by the time elapsed t: v = d/t. The unit of speed is typically meters per second (m/s) or kilometers per hour (km/h). For example, if a car travels a distance of 200 meters in 10 seconds, its speed is v = 200 m / 10 s = 20 m/s.
Therefore, the correct answer is as given above
(T/F) scientists claim that quantum theory proves consciousness moves to another universe at death
False. There is no scientific evidence to support the claim that consciousness moves to another universe at death.
Quantum theory is a branch of physics that deals with the behavior of subatomic particles and the fundamental nature of the universe. It does not address the concept of consciousness or the afterlife.
There are many theories about the nature of consciousness and what happens to consciousness after death, but these are philosophical or metaphysical in nature and are not based on scientific evidence. Some scientists and philosophers have proposed ideas about the relationship between consciousness and the universe, but these are still unproven hypotheses that are not supported by mainstream scientific understanding.
Learn more about Quantum theory here:
https://brainly.com/question/14577025
#SPJ4
3 A driver leaves Beirut at the instant t=0, reaches Saida after 35 minutes. He rests for 11 minutes then drives 45 minutes to reach Tyre. TaGive the instants of the different described events. b What is the durations of the whole Journey
A, Give the instant of the different described events
Someone please help I’ll be so grateful with one paragraph I don’t know how to begin…..
In this question you will be
assessed on using good English, organising information clearly and using
specialist terms where appropriate.
The table below shows some information about a new planet; Pegasi b, and Earth
Peg. Earth
Distance from the star| 7.7. 150
Time to orbit the sun|. 4. 365
Time to spin once on axis| 4. 1
Tilt of axis|. 79. 23.5
Write a guide to the new planet comparing it to earth and other planets in
the solar system and if it is possible to live there.
Answer:
Explanation:
Welcome to Pagasi b, new recruit. You will enjoy your new, fresh , home planet. Your new home world is more relaxed than earth, days are longer by about quadruple, as are the nights. Also seasons are also about 4 times as long on Pagasi b. one year on Pagasi b is a bit over 4 years on earth. You'll get great harvests and plenty of time to rest up during the mild, yet cool winters. If the equatorial region is too warm for you during summer you can always travel north as the planet is at a 79 degree axis tilt , and will provide much cooler climes as you travel north for summers. Have a great day, day, day, day :P
Why is it called a wavelength?
Every wave has a distinct size and shape.Wavelength is the separation between peaks (high points).
What is a wavelength, exactly?A waveform signal that is carried in space or down a wire has a wavelength, which is the separation between two identical places (adjacent crests) inside the consecutive cycles.This length is typically defined in wireless systems in meters (m), centimetres (cm), or millimeters (mm) (mm).
Why is light referred to be a wave?as airy as a waveYou can think of (model) light as just an electromagnetic wave.According to this paradigm, a shifting magnetic field is produced by a shifting electric field.
To know more about wavelengths visit:
https://brainly.com/question/13533093
#SPJ4
For how long must a current of 13 A flow to transfer:
a) 32.5 C of charge
b) 62.4 C of charge
c) 312 C of charge
d) 780 C of charge
e) 1612 C of charge
f) 812.5 C of charge
g) 468 kC of charge
h) 187.2 kC of charge
i) 163.8 kC of charge
(a) The time of 13 A current flow for 32.5 C charge is 2.5 s.
(b) The time of 13 A current flow for 62.4 C charge is 4.8 s
(c) The time of 13 A current flow for 312 C charge is 24 s.
(d) The time of 13 A current flow for 780 C charge is 60 s.
(e) The time of 13 A current flow for 1612 C charge is 124 s.
(f) The time of 13 A current flow for 812.5 C charge is 62.5 s.
(g) The time of 13 A current flow for 468 kC charge is 36,000 s.
(h) The time of 13 A current flow for 187.2 kC charge is 14,400 s.
(i) The time of 13 A current flow for 163.8 kC charge is 12,600 s.
What is electric current?Electric current is the flow of charges or electron in a given time period.
The relationship between charges, current and time is given as;
Q = It
t = Q / I
where;
t is the time of charge flowQ is the magnitude of the chargeI is the currentThe time of 13 A current flow for 32.5 C charge is calculated as;
t = (32.5 C ) / 13 A
t = 2.5 s
The time of 13 A current flow for 62.4 C charge is calculated as;
t = (62.4 C ) / 13 A
t = 4.8 s
The time of 13 A current flow for 312 C charge is calculated as;
t = (312 C ) / 13 A
t = 24 s
The time of 13 A current flow for 780C charge is calculated as;
t = (780 C ) / 13 A
t = 60 s
The time of 13 A current flow for 1612 C charge is calculated as;
t = (1612 C ) / 13 A
t = 124 s
The time of 13 A current flow for 812.5 C charge is calculated as;
t = (812.5 C ) / 13 A
t = 62.5 s
The time of 13 A current flow for 468 kC charge is calculated as;
t = (468,000 C ) / 13 A
t = 36,000 s
The time of 13 A current flow for 187.2 kC charge is calculated as;
t = (187,200 C ) / 13 A
t = 14,400 s
The time of 13 A current flow for 163.8 kC charge is calculated as;
t = (32.5 C ) / 13 A
t = 12,600 s
Learn more about flow of charges here: https://brainly.com/question/11402030
#SPJ1
A 61 kg person is on Mars which has an acceleration due to gravity...
Answer:
w = 219.6 N
Explanation:
w = mg
where w is weight, m is mass in kg, and g is acceleration due to gravity in meters per second squared
in this case, given is
m = 61kg
g = 3.6 m/s^2
By plugging in the given values, you can find the weight of the person on mars
w = 61(3.6)
w = 219.6 N
What is an example of free operant?
An example of free operant is a rat in a Skinner box pushing a lever to receive a food reward. The rat is free to choose whether or not to press the lever, and the behavior transversal is reinforced by the food reward.
Free operant is a type of operant conditioning where the learner has the option to make choices in order to receive a reward. The learner is free to choose whether or not to perform the desired behavior, and is reinforced when they do so. An example of free operant is a rat in a Skinner box pushing a lever to receive a food reward. The rat is free to choose whether or not to press the lever, and the behavior is reinforced by the food reward. In free operant, the learner can choose whether to perform the behavior and is not controlled by the environment. It is distinct from other forms of operant conditioning, such as fixed-ratio or interval schedules, where the learner’s behavior is controlled by the environment. Free operant is an important tool in learning and behavior modification, as it allows the learner to choose the behaviors they wish to perform and be rewarded for them.
Learn more about transversal here
https://brainly.com/question/13618693
#SPJ4
Puck b has 2ma the mass of puck a. Starting from rest, both pucks are pulled the same distance across frictionless ice by strings with the same tension. How much is the final kinetic energies of pucks a and b.
(A) Puck B has kinetic energy that is twice as great as puck A's.
(b) The final speeds of pucks A and B are identical.
Assume that puck A has a mass of m and puck B has a mass of 2 m.
The initial speed of both pucks is u, and their respective starting distances are s.
Let's say that T is the same tension.
The kinetic energy is then specified as,
The kinetic energy relies on the mass since the speed is constant.
Then,Therefore, the ratio of the kinetic energies of A and B is 1: 2.
As a result, we can say that puck B has kinetic energy that is twice that of puck A.
The puck's final speed is specified as,
v = s/t
Here, s denotes the traveled distance.
Since both pucks are transported across the frictionless ice at the same speed. Consequently, each puck's end speed is also the same.
As a result, we can say that both pucks A and B have the same final speed.
To learn more about kinetic energy please click on below link
https://brainly.com/question/26472013
#SPJ4
an object is moving to the right with speed vi when a force of magnitude f is exerted on it. in which of the following situations is the object’s direction of motion changing and kinetic energy decreasing at the instant shown?
The situation that is the object’s direction of motion changing and kinetic energy decreasing at the instant shown in diagram A.
What is kinetic energy?The energy that a body possesses as a result of its motion is known as kinetic energy. A body with kinetic energy must thus be in motion. Remember that a force is what causes motion.
Now, a force must act in the same direction as the moving object in order to enhance its kinetic energy. As a result, the diagram presented in option A should be the appropriate response to the question.
Therefore, the correct option is A.
To learn more about kinetic energy, refer to the link:
https://brainly.com/question/26472013
#SPJ4
The question is incomplete. Your most probably complete question is given below: the image is added.
Which force acts on any object moving through the air
The force of air resistance acts on any object while moving through the air.
We live in a medium where the air is present everywhere. It is not a vacuum where no force will be experienced by us but we live on earth where the air is present everywhere. Whenever we cut through, the air we encounter a force called air resistance.
Air resistance is like friction, it is everywhere. Air resistance always acts opposite to our direction of motion and like friction, it is a necessary evil.
Whenever an object moves through the air, air resistance always acts to oppose its motion.
Know more about air resistance at - https://brainly.com/question/25748718
How can you remember the 7 electromagnetic waves?
Radio waves, microwaves, IR or infrared light, visible light, UV or ultraviolet rays, x-rays, and gamma rays are the frequencies from lowest to highest. Mneumonic means: Red Marley Invaded Vietnam Using X-ray Granade. So you can utilize that to help you remember the electromagnetic spectrum's order.
What is meant by an electromagnetic spectrum?The electromagnetic spectrum is the scale or range of electromagnetic radiation frequencies, as well as their wavelengths and photon energies. The entire spectrum of radiation contains both magnetic and electrical fields and makes its way in waves. The electromagnetic spectrum encompasses the entire range of wavelengths and frequencies. It begins with a very low level of energy and has the potential to transform into a very high energy level when it consists of wavelengths shorter and higher frequencies.
Learn more about photon from
https://brainly.com/question/26523138
#SPJ4
It takes a 7 n force to cause a 0. 028 kg object to begin moving. What is the acceleration of the object as it begins to move?.
It takes a 7 N force to cause a 0. 028 kg object to begin moving. The acceleration of the object as it begins to move is 250 m/s².
What is acceleration?
Acceleration is defined as the rate of change of velocity with respect to time.
Acceleration is a vector quantity as it has both magnitude and direction. It is also the second derivative of position with respect to time or it is the first derivative of velocity with respect to time.
According to Newton's 2nd law, the force on an object is equal to the mass times acceleration of an object.
F = ma
and, a = F/m
Given, the force acting on an object to move it, F = 7N
The mass of the object, m = 0.028 Kg
The acceleration of the object = 7/0.028 = 250 m/s²
Therefore, the acceleration of the object as it begins to move is 250 m/s²
learn more about acceleration:
https://brainly.com/question/12550364
#SPJ4
An object is moving to the right with speed vi when a force of magnitude f is exerted on it. in which of the following situations is the object’s direction of motion changing and kinetic energy decreasing at the instant shown?
The object’s direction of motion changes and kinetic energy decreases at the instant shown by situation D.
The full question is in the attachment. The formula for kinetic energy
Ek = 0.5 mv²
m = the mass of the objectv = the velocityIf velocity decreases, the kinetic energy also decreases.
Look at every situation
Situation ALearn more about kinetic energy here: https://brainly.com/question/20287444
#SPJ4
What is the motion of billiards ball?
The 2D motion which is also known as planar motion is the motion of the billiards ball because the billiards stick's direction will restrict it.
A billiard ball can move back and forth and side to side (after being knocked off the table) when it hits the billiard bat. The motion of a billiard ball is constrained to only one plane and is also planar or 2D motion. The movement of a billiard ball on a billiard table is two-dimensional. The force acting on the ball has two components. One is the normal reaction force N acting normally on the surface. The other is the frictional force F acting parallel to the surface. The sum of the two forces gives a net or total value T acting in the spray direction (or vice versa).
Learn more about the billiards in
https://brainly.com/question/18148067
#SPJ4
How do you find the amplitude when given the wavelength and frequency?
A trigonometric function's amplitude is equal to half the distance between the curve's highest and lowest points:(Maximum) − (Minimum) 2 = (Amplitude).
The amplitude can be found where in a commodity derivatives?A distance between the function's center line and its top or bottom is known as its amplitude, and the distance between its two peaks, or the time it takes for the graph to repeat itself, is known as its period.
What in mathematics is the amplitude?The distance that a function's graph moves between and above its midline is referred to as its amplitude.When graphing a formula given, the amplitude's value corresponds to the sine function's coefficient.
To know more about wavelength and frequency visit:
https://brainly.com/question/2288272
#SPJ4
Which companies are reporting Scope 3 emissions?
According to the SEC's proposed climate disclosure rule, all registrants must disclose scope 3 emissions because they constitute a significant source of financial risk associated to climate change along the company value chain.
Scope 3 emission: what is it?Scope 3 emission are the outcome of operations on resources that the reporting company does not own or control, but which are indirectly impacted by the organization through its value chain.All sources outside of an organization's range 1 or scope 2 boundary are included in scope 3 emissions.
A Scope 3 emission, is water?emissions from the biological decomposition of the waste during waste water treatment.These Scope 3 emissions include:Since they are not managed or operated by the organization, they fall under Category 5 - Waste Generated in Operations.
To know more about Scope 3 emissions visit:
https://brainly.com/question/29546969
#SPJ4
an athlete pushes a 50-kg sled with a horizontal force of 200 n and it fails to move. what is the net force on the sled?
The net force on the sled is 400 N.
The net force on the sled is the sum of all the forces acting on the sled. In this case, the only forces acting on the sled are the horizontal force of 200 N applied by the athlete and the force of friction acting on the sled.
The force of friction is given by the equation:
F_friction = μ × F_normal
where F_friction is the force of friction, μ is the coefficient of friction between the sled and the surface it is on, and F_normal is the normal force acting on the sled.
The normal force is the force exerted on an object by a surface that is perpendicular to the surface. For an object at rest, the normal force is equal to the weight of the object. In this case, the weight of the sled is 50 kg × 9.8 m/s² = 490 N.
Plugging the values for the coefficient of friction, the normal force, and the applied force into the equation gives us the following:
F_friction = μ × F_normal = μ × 490 N = 200 N
The net force on the sled is the sum of the horizontal force applied by the athlete and the force of friction:
F_net = F_horizontal + F_friction = 200 N + 200 N = 400 N
Therefore, the net force on the sled is 400 N.
Learn more about force at
https://brainly.com/question/20332632?referrer=searchResults
#SPJ4
Assume the following waves are propagating in air
a) Calculate the wavelength lambda_1 for gamma rays offrequency f_1 = 6.30×1021 Hz.
c) Calculate the wavelength lambda_2 for visible light offrequency f_2 = 5.40×1014 Hz.
A. The wavelength of light in gamma ray is 4.76x10⁻¹³m.
B. The wavelength of light in the visible light range is 5.55x10⁻6m.
The wavelength of the light ray is always given by
Lambda=c/f, where c is the speed of light in vacuum and it's value is c=3x10⁹ m/sec and f is the frequency of the light ray.
a. The frequency of the gamma-ray (f1)=6.3x10²¹ Hertz. Since , lambda =c/f , Lambda 1=c/f1 =(3x10⁹) / (6.3x10²¹) =4.76x10⁻¹³ m.
The normal wavelength of the gamma rays are always below 100 pm or 10⁻¹⁰ m.
b.The frequency of visible light (f2) =5.40x10¹⁴ Hertz. Lambda 2=c/ f2 =(3x10⁹) / (5.40x10¹⁴) =5.55x10⁻⁶ m.The normal range of wavelength of visible light is 400-700 nm.
For further details about the wavelength of light follow the link : https://brainly.com/question/29309973
#SPJ4
a toy rocket has a momentum of 150 kg*m/s, and a velocity of 30 m/s. Calculate the MASS:
A golf ball is hit upward at an angle from the horizontal and speed v=40m|s.it reaches a maximum height of 10m as illustrated above.assume the ballistic trajectory starts from ground level and ignore air resistance..assume the shot is made on a wide level field...
What is the initial angle?
Answer:
Explanation: v = 40 m/s, H = 10m, g = 9.8 m/s2
H = (v * sinθ)^2 / 2g
H = v^2 * (sinθ)^2 / 2g
H = (40)^2 * (sinθ)^2 / 2g
H = 1600 * (sinθ)^2 / 2g
Cross multiply
2gH = 1600 * (sinθ)^2
2 * 9.8 * 10 = 1600 * (sinθ)^2
196 = 1600 * (sinθ)^2
Make (sinθ)^2 the subject of the formula
(sinθ)^2 = 196 / 1600
Take the square root of both sides
√(sinθ)^2 = √( 196 / 1600)
sinθ = 0.35
θ = sin^-1(0.35)
θ = 20.48731511
Approx. 20.49
I hope this was helpful