2 Lights slows down when it enters water from air.
a What happens to its speed?
b What happens to its wavelength?
c What happens to its frequency?​

Answers

Answer 1
Light travels as waves, with the wavefronts perpendicular to the direction of motion. In the animation shown here, the wavefronts are represented by the green parallel lines. The red arrow represents the direction of motion. As light moves from air into water, it not only slows, but the wavelength changes. wavelength becomes shorter in the denser medium of water.


Light will travel in straight line unless it meets any object (medium) in its path. Light changes its speed when it passes from one medium to other and the direction of light changes. This bending of light is called refraction.

This will happen in both when light passes through lighter to denser medium and also while comes from denser medium to lighter medium.

The speed of the light is increases when it comes from denser to less dense medium and decreases when it passes through lighter to denser. Light travels faster in vacuum compared with any other medium.

Refractive index defines the speed of light in a medium.

Refractive index (n)= v1/v2, v1 and v2 are the speed of light in vacuum and medium, respectively.

More the refractive index, slower the speed of light in that medium.

Coming to the wavelength of light, λ=v / f and here the frequency (f) of incident will not change when light passes through different medium.

Wavelength is directly proportional to the speed (v), then the wavelength increases if speed of light increases and vice versa.

The wavelength of light decreases when it goes from air to water because the speed of light decreases.

Mark brainliest

Related Questions

Give an example of a physical entity that is quantized. State specifically what the entity is and what the limits are on its values.

Answers

Answer:

A charge is a physical entity that has been quantized. The limits on its values are the value of a charged particle quantized in the state where 'n'...

Explanation:

One example of a physical entity that is quantized is:

The amount of money in your pocket.

The amount can't have any fraction of 1 cent.  

Its value must be an integer-multiple of cents, or 0.01 dollar.    

When it increases or decreases, it jumps from one integer number of cents to the next integer number.  It doesn't "slide" from one to the next.  It can never have a value between two integer numbers of cents.

Consider the following possibilities and select the correct choice.
1. Tx Ty > Tz
2. Tx Ty < Tz
3. Tx Ty = Tz

Answers

Answer:

Tx not but mybe

Explanation:

for that reason its just trying to help

20 points and brainliest‼️‼️‼️‼️
A 4.88 x 10-6 C charge moves 265 m/s
parallel (at 0°) to a magnetic field of
0.0579 T. What is the magnetic force
on the charge?

Answers

Answer:

0 N

Explanation:

Applying,

F = qvBsin∅................. Equation 1

Where F = Force on the charge, q = charge, v = Velocity, B = magnetic charge, ∅ = angle between the velocity and the magnetic field.

From the question,

Given: q = 4.88×10⁻⁶ C, v = 265 m/s, B = 0.0579 T, ∅ = 0°

Substitute these values into equation 1

F = ( 4.88×10⁻⁶)(265)(0.0579)(sin0)

Since sin0° = 0,

Therefore,

F = 0 N

A crane raises a crate with a mass of 150 kg to a height of 20 m. Given that
the acceleration due to gravity is 9.8 m/s2, what is the crate's potential energy
at this point?

Answers

Answer:

[tex]\boxed {\boxed {\sf 29,400 \ Joules}}[/tex]

Explanation:

Gravitational potential energy is the energy an object possesses due to its position. It is the product of mass, height, and acceleration due to gravity.

[tex]E_P= m \times g \times h[/tex]

The object has a mass of 150 kilograms and is raised to a height of 20 meters. Since this is on Earth, the acceleration due to gravity is 9.8 meters per square second.

m= 150 kg g= 9.8 m/s²h= 20 m

Substitute the values into the formula.

[tex]E_p= 150 \ kg \times 9.8 \ m/s^2 \times 20 \ m[/tex]

Multiply the three numbers and their units together.

[tex]E_p=1470 \ kg*m/s^2 \times 20 m[/tex]

[tex]E_p=29400 \ kg*m^2/s^2[/tex]

Convert the units.

1 kilogram meter square per second squared (1 kg *m²/s²) is equal to 1 Joule (J). Our answer of 29,400 kg*m²/s² is equal to 29,400 Joules.

[tex]E_p= 29,400 \ J[/tex]

The crate has 29,400 Joules of potential energy.

Answer:

29,400 J

Explanation:

did the quiz <3

____can be used to transmit information

A heat
B patterns
c senses
D digital

Answers

Answer:

D. digital

Explanation:

Digital signals are transmitted through electromagnetic waves.

I'm not sure


What is Velocity in physics

Answers

Answer:

hii

Explanation:

i hope this helps you

Answer:

The velocity of an object is the rate of change of its position with respect to a frame of reference, and is a function of time. ... Velocity is a physical vector quantity; both magnitude and direction are needed to define it

Explanation:

hope it helps

pls maek me as brainliest thanks❤

A plane has a mass of 360,000 kg takes-off at a speed of 300 km/hr. i) What should be the minimum acceleration to take off if the length of the runway is 2.00 km.ii) At this acceleration, how much time would the plane need from starting to takeoff. iii) What force must the engines exert to attain this acceleration

Answers

Answer:

i) the minimum acceleration to take off is 22500 km/h²

ii) the required time needed by the plane from starting to takeoff is 0.0133 hrs

iii) required force that the engine must exert to attain acceleration is 625 kN

Explanation:

Given the data in the question;

mass of plane m = 360,000 kg

take of speed v = 300 km/hr = 83.33 m/s

i)

What should be the minimum acceleration to take off if the length of the runway is 2.00 km

from Newton's equation of motion;

v² = u² + 2as

we know that a plane starts from rest, so; u = 0

given that distance S = 2 km

we substitute

(300)² = 0² + ( 2 × a × 2 )

90000 = 4 × a

a = 90000 / 4

a = 22500 km/h²

Therefore,  the minimum acceleration to take off is 22500 km/h²

ii) At this acceleration, how much time would the plane need from starting to takeoff.

from Newton's equation of motion;

v = u + at

we substitute

300 = 0 + 22500 × t

t = 300 / 22500

t = 0.0133 hrs

Therefore, the required time needed by the plane from starting to takeoff is 0.0133 hrs

iii) What force must the engines exert to attain this acceleration

we know that;

F = ma

acceleration a = 22500 km/hr² = 1.736 m/s²

so we substitute

F = 360,000 kg × 1.736 m/s²

F =  624960 N

F = 625 kN

Therefore, required force that the engine must exert to attain acceleration is 625 kN

A motorboat embarks on a trip, heading downstream in a river in which the current flows at a rate of 1.5m/s. After 30.0 minutes, the boat has traveled a distance of 24.3 km downstream. How long will it take the boat to travel upstream to its original point of embarkation

Answers

Answer:

[tex]t=2413s[/tex]

Explanation:

From the question we are told that:

Velocity [tex]v=1.5m/s[/tex]

Time [tex]t=30min=>30*60=>1800[/tex]

Distance [tex]d=24.3km[/tex]

Generally the Newton's equation for Speed going down the stream is mathematically given by

 [tex]v + u = \frac{d}{t}[/tex]

 [tex]1.5+v=frac{24300}{1800}[/tex]

 [tex]v=12m/s[/tex]

Therefore

 [tex]v + u = \frac{d}{t}[/tex]

 [tex]t=\frac{24300}{12-1.5}[/tex]

 [tex]t=2413s[/tex]

True or false quarterbacks should not expect to have bad passes

Answers

Answer:

false

Explanation:

False ..................

how do you convert micrometer to killometer​

Answers

Answer:

1 x 10^-9 kilometers

Hope this helps

Have a good day :)

Explanation:

A long, straight metal rod has a radius of 5.75 cm and a charge per unit length of 33.3 nC/m. Find the electric field at the following distances from the axis of the rod, where distances are measured perpendicular to the rod's axis.

Answers

Answer:

Explanation:

From the question;

We will make assumptions of certain values since they are not given but the process to achieve the end result will be the same thing.

We are to calculate the following task, i.e. to determine the electric field at the distances:

a)  at 4.75 cm

b)  at 20.5 cm

c) at 125.0 cm

Given that:

the charge (q) = 33.3 nC/m

= 33.3 × 10⁻⁹ c/m

radius of rod = 5.75 cm

a) from the given information, we will realize that the distance lies inside the rod. Provided that there is no charge distribution inside the rod.

Then, the electric field will be zero.

b) The electric field formula [tex]E = \dfrac{kq }{d}[/tex]

[tex]E = \dfrac{9 \times 10^9 \times (33.3 \times 10^{-9}) }{0.205}[/tex]

E = 1461.95 N/C

c) The electric field E is calculated as:

[tex]E = \dfrac{9 \times 10^9 \times (33.3 \times 10^{-9}) }{1.25}[/tex]

E = 239.76 N/C

A vertical wall (8.7 m x 3.2 m) in a house faces due east. A uniform electric field has a magnitude of 210 N/C. This field is parallel to the ground and points 42o north of east. What is the electric flux through the wall

Answers

Answer:

[tex]\phi=4344.72Nm^2/c[/tex]

Explanation:

From the question we are told that:

Dimension of Wall:

 [tex](L*B)=(8.7 m * 3.2 m)[/tex]

Electric field [tex]B=210 N/C[/tex]

Angle [tex]\theta =42 \textdegree North[/tex]

Generally the equation for electric Flux is mathematically given by

 [tex]\phi=EAcos\theta[/tex]

 [tex]\phi=210*(8.7*3.2)*cos 42[/tex]

 [tex]\phi=4344.72Nm^2/c[/tex]

a 2100-kg car drives with a speed of 18 m/s onb a flat road around a curve that has a radius of curvature of 83m. The coefficient of static friction between the car and the road is 0.78. What is the magnitude of the force of static friction acting on the car

Answers

Answer:

The magnitude of the friction force is 8197.60 N

Explanation:

Using the definition of the centripetal force we have:

[tex]\Sigma F=ma_{c}=m\frac{v^{2}}{R}[/tex]

Where:

m is the mass of the carv is the speed R is the radius of the curvature

Now, the force acting in the motion is just the friction force, so we have:

[tex]F_{f}=m\frac{v^{2}}{R}[/tex]

[tex]F_{f}=2100\frac{18^{2}}{83}[/tex]

[tex]F_{f}=8197.60 \: N[/tex]

Therefore the magnitude of the friction force is 8197.60 N

I hope it helps you!

A 3.7-kg object is acted on by two forces. One of the forces is 11 N acting toward the
east. What is the other force if the acceleration of the object is 1.0 m/s2 toward the east?

Answers

Answer:

F₂ = -7.3 N

Explanation:

Given that,

The mass of an object, m₁ = 3.7 kg

First force, F₁ = 11 N

The net acceleration of the object is 1 m/s².

We know that,

F₁+F₂ = ma

11+F₂ = (3.7)(1)

F₂ = 3.7-11

F₂ = -7.3 N

so, the other force is 7.3 N and it is acting in west direction.

When a mass of 3.0-kg is hung on a vertical spring, it stretches by 0.085 m. Determine
the period of oscillation of a 4.0-kg object suspended from this spring.

Answers

Answer:

the period of oscillation of the given object is 0.14 s

Explanation:

Given;

mass of the object, m = 3 kg

extension of the spring, x = 0.085 m

The spring constant is calculated as follows;

[tex]F = mg = \frac{1}{2} ke^2\\\\2mg = ke^2\\\\k = \frac{2mg}{e^2} \\\\k = \frac{2\times 3 \times 9.8}{(0.085)^2} \\\\k = 8,138.41 \ N/m[/tex]

The angular speed of a 4 kg object is calculated as follows;

[tex]\omega = \sqrt{\frac{k}{m} } \\\\\frac{2\pi }{T} = \sqrt{\frac{k}{m} } \\\\T= 2\pi \sqrt{\frac{m}{k} } \\\\T = 2\pi \sqrt{\frac{4}{8138.41} }\\\\T = 0.14 \ s[/tex]

Therefore, the period of oscillation of the given object is 0.14 s

Electromagnetic radiation from a 8.25 mW laser is concentrated on a 1.23 mm2 area. Suppose a 1.12 nC static charge is in the beam, and moves at 314 m/s. What is the maximum magnetic force it can feel

Answers

Answer:

The maximum magnetic force is 2.637 x 10⁻¹² N

Explanation:

Given;

Power, P = 8.25 m W = 8.25 x 10⁻³ W

charge of the radiation, Q = 1.12 nC = 1.12 x 10⁻⁹ C

speed of the charge, v = 314 m/s

area of the conecntration, A = 1.23 mm² = 1.23 x 10⁻⁶ m²

The intensity of the radiation is calculated as;

[tex]I = \frac{P}{A} \\\\I = \frac{8.25 \times 10^{-3} \ W}{1.23 \ \times 10^{-6} \ m^2} \\\\I = 6,707.32 \ W/m^2[/tex]

The maximum magnetic field is calculated using the following intensity formula;

[tex]I = \frac{cB_0^2}{2\mu_0} \\\\B_0 = \sqrt{\frac{2\mu_0 I}{c} } \\\\where;\\\\c \ is \ speed \ of \ light\\\\\mu_0 \ is \ permeability \ of \ free \ space\\\\B_0 \ is \ the \ maximum \ magnetic \ field\\\\B_0 = \sqrt{\frac{2 \times 4\pi \times 10^{-7} \times 6,707.32 }{3\times 10^8} } \\\\B_0 = 7.497 \times 10^{-6} \ T[/tex]

The maximum magnetic force is calculated as;

F₀ = qvB₀

F₀ = (1.12 x 10⁻⁹) x (314) x (7.497 x 10⁻⁶)

F₀ = 2.637 x 10⁻¹² N

A flat (unbanked) curve on a highway has a radius of 260 mm . A car successfully rounds the curve at a speed of 32 m/sm/s but is on the verge of skidding out.

Required:
a. If the coefficient of static friction between the car’s tires and the road surface were reduced by a factor of 2, with what maximum speed could the car round the curve?
b. Suppose the coefficient of friction were increased by a factor of 2; what would be the maximum speed?

Answers

I suppose you meant to say the radius of the curve is 260 m, not mm?

There are 3 forces acting on the car as it makes the turn,

• its weight mg pulling it downward;

• the normal force exerted by the road pointing upward, also with magnitude mg since the car is in equilibrium in the vertical direction; and

• static friction keeping the car from skidding with magnitude µmg (since it's proportional to the normal force), pointing horizontally toward the center of the curve.

By Newton's second law, the net force on the car acting in the horizontal direction is

F = ma   =>   µmg = ma   =>   a = µg

where a is the car's radial acceleration given by

a = v ^2 / R

with v = the car's tangential speed and R = radius of the curve. At the start, the car's radial acceleration is

a = (32 m/s)^2 / (260 m) ≈ 3.94 m/s^2

(a) If µ were reduced by a factor of 2, then the radial acceleration would also be halved:

1/2 a = 1/2 µg

Then the car can have a maximum speed v of

1/2 a = v ^2 / R   =>   v = √(aR/2) = √((3.94 m/s^2) (260 m) / 2) ≈ 22.6 m/s

(b) If µ were increased by a factor of 2, then the acceleration would also get doubled. Then the maximum speed v would be

2a = v ^2 / R   =>   v = √(2aR) = √(2 (3.94 m/s^2) (260 m)) ≈ 45.3 m/s

Calculate the heat energy conducted per hour through the side walls of a cylindrical steel
boiler of 1.00 m diameter and 3.0 m long if the internal and external temperatures of the
walls are 140 °C and 40 °C respectively and the thickness of the walls is 6.0 mm. (Thermal
conductivity of steel, k = 42 Wm-4°C-4)

Answers

Explanation:

heat caoacity and heat is difference

The heat energy conducted per hour through the side walls of the cylindrical steel boiler  is 27708847 kJ.

What is thermal conductivity?

The rate at which heat is transported by conduction through a material's unit cross-section area when a temperature gradient exits perpendicular to the area is known as thermal conductivity.

In the International System of Units (SI), thermal conductivity is measured by Wm⁻¹K⁻¹.

Diameter of the cylindrical steel boiler: d = 1.00m.

Length  of the cylindrical steel boiler: l = 3.00m.

thickness of the walls is = 6.0 mm = 0.006 m

Temperature gradient is = (140-40) °C/0.006 m = 1666.67 °C/m

Thermal conductivity of steel,  = 42 W/m-°C.

Hence, the heat energy conducted per hour through the side walls of the cylindrical steel boiler = 42×3600×1666.67 ×2π×0.5(0.5+3.0) Joule

= 27708847 kJ

Learn more about  thermal conductivity here:

https://brainly.com/question/23897839

#SPJ2

At 20 ◦C a copper wire has a resistance of 4×10−3 Ω and a temperature coefficient of resistivity of 3.9×10−3 (C◦)−1, its resistance at 100 ◦C is

A.
52.5 × 10-3 Ω
B.
5.25 × 10-3 Ω
C.
5.25 × 10-4 Ω
D.
5.25 × 10-2 Ω


E.
25.5 × 10-3 Ω

Answers

Answer:

25.5×10_3 1928 82i93874 89_/ 9299

Two resistors, A and B, are connected in parallel across a 6.0-V battery. The current through B is found to be 2.0 A. When the two resistors are connected in series to the 6.0- V battery, a voltmeter connected across resistor A measures a voltage of 4.0 V. Find the resistances of A and B

Answers

Answer:

The resistance of A is 6 ohms and the resistance of B is 3 ohms

Explanation:

Step 1: For the first connection (parallel connection), the resistance of B will be calculated.

Note: in a parallel connection, the voltage through each resistor is the same.

[tex]V = I_AR_A = I_BR_B\\\\R_B = \frac{V}{I_B} = \frac{6}{2} = 3 \ ohms[/tex]

Step 2: The resistance of A will be calculated from the second connection (series connection)

Note: in series connection, the current flowing in each resistor is the same

[tex]V = V_A + V_B\\\\V = IR_A + IR_B\\\\The \ voltage \ drop \ in \ B; \ V_B = V- V_A\\\\V_B = 6 - 4 = 2 \ V\\\\IR_B = 2\ V\\\\I = \frac{2 \ V}{R_B}= \frac{2}{3} \ A\\\\The \ resistance \ of \ A \ is \ calculated \ as ;\\\\IR_A = 4 \ V\\\\R_A = \frac{4}{I} = \frac{4 \times 3}{2} = 6 \ ohms[/tex]

1. What different types of shots are taken on the basketball court?

Answers

Answer:

Here are a few commonly used types of shooting in basketball.

Jump Shot. A jump shot is most frequently used for a mid to long-range shots, including shooting beyond the arc. ...Hook Shot. A hook shot is when the shot is made while your body is not directly facing the basket. ...Bank Shot. ...Free Throw. ...Layup. ...Slam Dunk.

You are using a constant force to speed up a toy car from an initial speed of 6.5 m/s
to a final speed of 22.9 m/s. If the toy car has a mass of 340 g, what is the work
needed to speed this car up?

Answers

By the work-energy theorem, the total work done on the car is equal to the change in its kinetic energy:

W = ∆K

W = 1/2 (0.34 kg) (22.9 m/s)² - 1/2 (0.34 kg) (6.5 m/s)²

W82 J

A 1.2-kg mass suspended from a spring of spring constant 22 N.m-1 executes simple harmonic motion of amplitude 5 cm. Assuming that the mass is at the equilibrium posiiton at t = 0, what is its displacement at t = 1.0 s?

Answers

Answer:

[tex]d =3.7*10^{-3} m[/tex]

Explanation:

From the question we are told that:

Mass [tex]m=1.2kg[/tex]

Spring constant [tex]\mu=22Nm^{-1}[/tex]

Amplitude [tex]A=5cm=0.05m[/tex]

Generally the equation for displacement d is mathematically given by

 [tex]d = Asin(\omega t)[/tex]

Where

 [tex]\omega=angular\ velocity[/tex]

 [tex]\omega=\sqrt{k/m}[/tex]

 [tex]\omega=\sqrt{22/1.2}[/tex]

 [tex]\omega=4.2817rads^{-1}[/tex]

Therefore  

 [tex]d = 0.05*sin(4.2817*1)[/tex]  

 [tex]d =3.7*10^{-3} m[/tex]

How does gravity affect your ability to live on a planet?

Answers

If we didn’t have it, we might just float into space. Or it would be hard to live with everything floating around
If it were too light, we would float off, too heavy, and then our bones would have to be extremely dense lest we want to get crushed by just existing

: Ánh nắng mặt trời có cường độ đồng đều với bước sóng nằm trong vùng khả khiến 430nm-690nm đến đập vuông góc với một bản mỏng nước có bề dày 320nm, chiết suất 1,33 lơ lửng trong không khí. Tìm bước sóng thích hợp để ánh sáng phản từ bản mỏng là sáng nhất đối với người quan sát

Answers

Sorry I don’t know this language

As part of a safety investigation, two 1300 kg cars traveling at 17 m/s are crashed into different barriers. Find the average forces exerted on:

a. the car that hits a line of water barrels and takes 1.5 s to stop
b. the car that hits a concrete barrier and takes 0.10 s to stop.

Answers

Answer:

a.  F = 14,733.33 N

b. F = 221,000 N

Explanation:

Given;

mass of the cars, m = 1300 kg

velocity of the cars, v = 17 m/s

time taken for the first car to stop after hitting a barrier, t = 1.5 s

time taken for the second car to stop after hitting a barrier, t = 0.1 s

The average forces exerted on each car is calculated as follows;

a. the car that hits a line of water barrels and takes 1.5 s to stop

[tex]F = ma = m\times \frac{v}{t} = 1300 \times \frac{17}{1.5} = 14,733.33 \ N\\\\F = 14,733.33 \ N[/tex]

b. the car that hits a concrete barrier and takes 0.10 s to stop

[tex]F = ma = m\times \frac{v}{t}= 1300 \times \frac{17}{0.1} = 221,000 \ N\\\\F = 221,000 \ N[/tex]

Hold a small piece of paper (e.g., an index card) flat in front of you. The paper can be thought of as a part of a larger plane surface. What single line could you use to specify the orientation of the plane of the paper (i.e., so that someone else could hold the paper in the same, or in a parallel, plane)?

Answers

Answer:

NORMAL

Explanation:

In mathematics to define a plane you need a line perpendicular to the plane called NORMAL and the point of application of this line at a point on the plane.

Based on this definition you only need to specify the normal plane is perpendicular to this line, it should be noted that this does not define a single plane but the whole family of plane is contains the normal.

Consequently only the NORMAL is needed

Kinetic energy is the energy an object has due to its
die hele

Answers

Answer:

There are a couple of interesting things about kinetic energy that we can see from the equation.

Kinetic energy depends on the velocity of the object squared. This means that when the velocity of an object doubles, its kinetic energy quadruples. A car traveling at 60 mph has four times the kinetic energy of an identical car traveling at 30 mph, and hence the potential for four times more death and destruction in the event of a crash.

Kinetic energy must always be either zero or a positive value. While velocity can have a positive or negative value, velocity squared is always positive.

Kinetic energy is not a vector. So a tennis ball thrown to the right with a velocity of 5 m/s, has the exact same kinetic energy as a tennis ball thrown down with a velocity of 5 m

The food calorie, equal to 4186 J, is a measure of how much energy is released when food is metabolized by the body. A certain brand of fruit-and-cereal bar contains 160 food calories per bar.
Part A
If a 67.0 kg hiker eats one of these bars, how high a mountain must he climb to "work off" the calories, assuming that all the food energy goes only into increasing gravitational potential energy?
Express your answer in meters.
Part B
If, as is typical, only 20.0 % of the food calories go into mechanical energy, what would be the answer to Part A? (Note: In this and all other problems, we are assuming that 100% of the food calories that are eaten are absorbed and used by the body. This is actually not true. A person's "metabolic efficiency" is the percentage of calories eaten that are actually used; the rest are eliminated by the body. Metabolic efficiency varies considerably from person to person.)
Express your answer in meters.

Answers

It’s definitely gonna be A

1. Calculate the density of a 5.00 g marble which, when placed in a
graduated cylinder containing 60 milliliters of water, raised the volume of
the water to 68 milliliters.
2. An elevator with a mass of 1000kg is lifted 20 meters. How much work
was done on the elevator?
3. Calculate the potential energy of a 12 kg cat at the top of a 42 meter-
high hill.
4. Calculate the kinetic energy in joules of a 1500 kg car that is moving at a
speed of 10 m/s.

Answers

Answer:

1. 0.625 g/mL

2. 2×10⁵ J

3. 5040 J

4. 75000 J

Explanation:

1. Determination of the density.

We'll begin by calculating the volume of the marble. This can be obtained as follow:

Volume of water = 60 mL

Volume of water + Marble = 68 mL

Volume of marble =?

Volume of marble = (Volume of water + Marble) – (Volume of water)

Volume of marble = 68 – 60

Volume of marble = 8 mL

Finally, we shall determine the density of the marble. This can be obtained as follow:

Mass of marble = 5 g

Volume of marble = 8 mL

Density of marble =?

Density = mass / volume

Density of marble = 5 / 8

Density of marble = 0.625 g/mL

2. Determination of the work done.

Mass (m) = 1000 Kg

Height (h) = 20 m

Acceleration due to gravity (g) = 10 m/s²

Workdone (Wd) =?

The work done can be obtained as follow:

Wd = mgh

Wd = 1000 × 10 × 20

Wd= 2×10⁵ J

3. Determination of the potential energy.

Mass (m) = 12 Kg

Height (h) = 42 m

Acceleration due to gravity (g) = 10 m/s²

Potential energy (PE) =?

The potential energy can be obtained as follow:

PE = mgh

PE = 12 × 10 × 42

PE = 5040 J

4. Determination of the kinetic energy.

Mass (m) = 1500 Kg

Velocity (v) = 10 m/s

Kinetic energy (KE) =?

The kinetic energy can be obtained as follow:

KE = ½mv²

KE = ½ × 1500 × 10²

KE = 750 × 100

KE = 75000 J

Other Questions
A car lows down at -5.00m/s^2 until it comes to a stop after traveling 15.0m. How much time did it take to stop How or why does lead affect blood flow? the result of subtraction of 3x from -4x is Plz help ill give brainliest ZEFG and ZGFH are a linear pair, mZEFG = 3n+ 21, and mZGFH = 2n + 34. What are mZEFG and mZGFH? write a creepy monster essay at least two paragraphs make it at least appropiate enough for babies to read my school strict on them stuf lol Briefly discuss the following statement:The functional group concept is important in organizing the information of organic chemistry.Support your discussion by giving two chemical equations to illustrate the application of this concept for each of two functional groups. Simplify the expression:-7(4-5) Why Nepal is regarded as mountainous country? What is the range of this set of data? When a box is set up like this it is really a representation of MEIOSIS. The "H" and "h" on the top of the box really represent . . . A. all of the alleles present in each parent's non-sex cells.B. the alleles each parent can contribute in their gametes. Find the difference of functions s and r shownbelow.r(x) = -X? + 3xs(x) = 2x + 1(s - r)(x) = Find the ratio of A to B if A= 51,786 and B= 17,475 Ellie made an octagon and used a ruler so each side is the same length. Her octagon has a perimeter of 80 inches. What is the length of each side? ___ (your answer) inches If y = 87.5, what is the value for x? 300x + 300 x plus StartFraction 500 over 7 EndFraction y equals 10,000.Y = 10,000 300x + 300 x plus StartFraction 500 Over 7 EndFraction y equals 10,000.(87.5) = 10,000 300x + 6,250 = 10,000 How dose the very small businesses finance Una gra est subiendo una caja de 1000 kg atada a una cadena. La caja, que inicialmente est en reposo, incrementa su velocidad 4 m/s cada segundo If a(x) = 3x + 1 and (x)= x-4, what is the domain of (boa)(x)? What are the chemicals that react with one another in a chemical reaction?