Answer: 0.5 moles of [tex]N_2[/tex] are produced in the reaction
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
The equation used is:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Given mass of [tex]CuO[/tex] = 113.6 g
Molar mass of [tex]CuO[/tex] = 79.5 g/mol
Plugging values in equation 1:
[tex]\text{Moles of CuO}=\frac{113.6g}{79.5g/mol}=1.43 mol[/tex]
For the given chemical reaction:
[tex]2NH_3+3CuO\rightarrow 3Cu+N_2+3H_2O[/tex]
By the stoichiometry of the reaction:
If 3 moles of [tex]CuO[/tex] produces 1 mole of [tex]N_2[/tex]
So, 1.43 moles of [tex]CuO[/tex] will produce = [tex]\frac{1}{3}\times 1.43=0.476=0.5mol[/tex] of [tex]N_2[/tex]
Hence, 0.5 moles of [tex]N_2[/tex] are produced in the reaction
I need to know how to do this but if you could just answer it it's fine
Answer:
im not entirely sure what needs to be done but the 2NH3 is the product and the other half is the reactants .
if any elements are added to others it is the reactants
this is a breakdown of a compound because the arrow always indicates the direction of the reaction .
At 500K, the equilibrium constant for the reaction N2O4D2NO2 is 1.5 x 10^3. What is the equilibrium constant for the reaction: 6 NO2 D 3N2O4?
Answer:
K = 2.96x10⁻¹⁰
Explanation:
Based on the initial reaction:
N2O4 ⇄ 2NO2; K = 1.5x10³
Using Hess's law, we can multiply this reaction changing K:
3 times this reaction:
3N2O4 ⇄ 6NO2; K = (1.5x10³)³ =3.375x10⁹
The inverse reaction has a K of:
6NO2 ⇄ 3N2O4 K = 1/3.375x10⁹;
K = 2.96x10⁻¹⁰How does a scientist make two solutions with the same molarity?
O A. By dissolving the same number of moles of each substance in the
same volume of water
B. By dissolving the same number of grams of each substance in the
same volume of water
C. By dissolving the maximum amount of each substance in the
same volume of water
D. By dissolving 1 mole of each substance in enough water to make
sure dissolving is complete
Answer:
a
Explanation:
It's a duh
El agua de una alberca requiere de 35.8 gramos de desinfectante (NaClO), por cada 1000 L de agua para mantenerse limpia. El día de hoy el cuidador de la alberca no fue a trabajar y dejó al velador encargado de la adición de desinfectante al agua, pero al velador se le olvidó la cantidad y le agregó 65 g.
Answer:
816L adicionales para mantener la concentración
Explanation:
Cuánta agua debe adicionar el cuidador para que se mantenga la concentración del desinfectante?
El desinfectante, NaClO, idealmente debe estar en una concentración de:
35.8g / 1000L = 0.0358g/L
Como el velador agregó 65g de desinfectante, la cantidad de agua necesaria es:
65g * (1L / 0.0358g) = 1816L de agua son necesarios
Asumiendo que el velador agregó 1000L, el cuidador debe agregar:
1816L - 1000L =
816L adicionales para mantener la concentraciónWhat does the prefix trans-indicate?
The carbons on either side of the double bond are pointed in opposite directions.
Vierte dos líquidos en una pendiente. No sabes qué tipo de sustancias son y necesitas saber cuál es más viscosa. La única herramienta que tienes es un cronómetro. ¿Qué puedes hacer para solucionar este problema?
Answer:
La respuesta está en la explicación
Explanation:
La viscosidad se puede definir como la resistencia al movimiento que presenta un líquido.
Al verter dos líquidos por separado en una pendiente, podrás ver cómo un líquido se tardará más en llegar al final de la pendiente que el otro. Este líquido será EL MÁS VISCOSO.
Así podrás, con el cronómetro, medir el tiempo que cada líquido se tarda en llegar a cierto punto de la pendiente, EL QUE TARDE MÁS SERÁ EL MÁS VISCOSO.
I would appreciate some help please ᕕ( ᐛ )ᕗ
3KOH + FeCl3 → Fe(OH)3 + 3KCl
How many grams of KOH are needed to produce 0.500 moles of KCl?
Answer:
dont know, will let uk in 2 mins
Explanation:
Explanation:
hope this helps you to understand:)
Describe the method to make pure, dry crystals of magnesium sulfate from a metal oxide and dilute acid.
Answer:
H2SO4(aq) + MgO(s) → H2O(l) + MgSO4(aq)
Explanation:
We must recall that the oxides of metals are bases. These metal oxides can react with dilute acids to yield salt and water.
Bearing that in mind, we want to obtain magnesium sulfate from a metal oxide and dilute acid.
In this case we need magnesium oxide and dilute sulphuric acid. The reaction occurs as follows;
H2SO4(aq) + MgO(s) → H2O(l) + MgSO4(aq)
La aparición del microscopio ha permitido la creación de nuevas áreas de estudio, tanto en la___________________________
Answer:
En la mejora de la investigación y la medicina.
Explicación:
La aparición del microscopio ha permitido la creación de nuevas áreas de estudio, tanto en la mejora de la investigación como en la medicina. La invención del microscopio nos permite crecer y desarrollarnos en el campo de la investigación y el estudio. Con este microscopio, los científicos pudieron descubrir la estructura de la célula, así como las partículas subatómicas que están presentes dentro del átomo. Gracias a este microscopio, los científicos pudieron crecer y desarrollarse en el campo de la creación de nuevos medicamentos.
What is stoichiometry?
Answer:
hope it help u !!!!
Explanation:
Stoichiometry is the relationship between the relative quantities of substances taking part in a reaction or forming a compound, typically a ratio of whole integers
the pH of orange juice is 4.0. what is the hydrogen ion concentration in orange juice ASAP PLEASE
pH = 4
- log[H+]= 4
[tex][H+] = {e}^{ - 4} [/tex]
[tex][H+] = 54.6[/tex]
The pH of orange juice 4. The concentration of hydrogen of [tex]10^{-4}[/tex].
What is pHThe pH scale, which originally stood for "potential of hydrogen," is being used to describe the acidity or alkalinity of aqueous solutions.
Calculation of concentration of hydrogen ion by using pH formula.
It can be calculated by using the formula.
pH = -log[[tex]H^{+}[/tex]].
[[tex]H^{+}[/tex]] = [tex]10^{-pH}[/tex]
[[tex]H^{+}[/tex]] = [tex]10^{-4}[/tex]
Therefore, the concentration of hydrogen ion by using pH formula will be [tex]10^{-4}[/tex].
To know more about pH
https://brainly.com/question/15289741
#SPJ2
Why can you not create a Punnett square
to determine the height of an individual-
Heterogéneo de tres fases y un componente.
HELP ASAP
Which of these 3 metals ,reacts more vigorously? Sodium, potassium or lithium *
a)Sodium reacts the most vigorously.
b)Potassium reacts the most vigorously.
c)Lithium reacts the most vigorously.
potassium reacts the most vigorously.
Calculate the mols for 4.2g of a Mg
Answer:
0.175mol
Explanation:
Mole of a substance can be calculated using the formula as follows:
number of moles (n) = mass (m) ÷ molar mass (MM)
According to this question, there are 4.2g of Magnesium (Mg).
Molar mass of Magnesium = 24g/mol, hence, the number of moles of 4.2g of Mg is as follows:
n = 4.2g ÷ 24g/mol
n = 0.175mol
Identifying Changes of Matter
Which of these are chemical changes in matter? Check all tha
Answer:
In a physical change the appearance or form of the matter changes but the kind of matter in the substance does not. However in a chemical change, the kind of matter changes and at least one new substance with new properties is formed. The distinction between physical and chemical change is not clear cut.
Please solve this question for me.
Answer:
0.0013 moles
Explanation:
moles = volume/ molar volume of gas
=240/24000cm3 (convert dm3 to cm3)
=0.0013
A test light with an electrical resistance of 9.00 S2 draws a current of 1.50 A when
it is connected to an electrical source. How much power does the light use?
Answer:
20.25 W
Explanation:
Applying,
P = I²R.................... Equation 1
Where P = Power, I = current drawn by the test light, R = Resistance of the test light
From the question,
Given: I = 1.5 A, R = 9.00 Ω
Substitute these values into equation 1
P = (1.5²)(9)
P = 2.25×9
P = 20.25 W
What are 3 things that
happen to your body when you start exercising
regularly?
Explanation:
Weight loss and weight maintenance.
Muscle gain.
Improved mood.
Improved heart health.
Un elemento X, del grupo I A, reacciona con un elemento Y, del grupo VI A. Señalar cuáles de las siguientes afirmaciones son correctas y cuáles no, justificando en todos los casos:
a) X es un metal
b) Y es un metal
c) La fórmula del compuesto es XY2
d) El compuesto es iónico
What is the physical state of nitrogen at -200c
In lab, you calculate the density of an iron rod to be 7.30 g/cm3. The accepted value
for the density of iron is 7.80 g/cm3. What is your percent error?
Answer:
6.41 %Explanation:
The percentage error of a certain measurement can be found by using the formula
[tex]P(\%) = \frac{error}{actual \: \: number} \times 100\% \\ [/tex]
From the question
actual density = 7.80 g/cm³
error = 7.30 - 7.80 = 0.5
We have
[tex]p(\%) = \frac{0.5}{7.8} \times 100 \\ = 6.410256...[/tex]
We have the final answer as
6.41 %Hope this helps you
what is an earthquake's epicenter found
Answer:
an epicenter is where an earthquake first hit
Answer:
The epicenter
Explanation:
The location below the earth's surface where the earthquake starts is called the hypocenter, and the location directly above it on the surface of the earth is called the epicenter. ... These are smaller earthquakes that occur afterwards in the same place as the mainshock.
The table below gives some characteristics of element Y.
Characteristics of element Y Values
Mass number 11
Number of neutrons in a single atom 6
Average atomic mass (grams/mole) 10.81
What is the identity of element Y?
Answer:
Boron B
Explanation:
According to the periodic table, Boron is the element with atomic mass of approximately 11 [i.e 10.81]
To calculate Neutrons
Neutrons = Mass number - Protons
Number of protons in Boron is same as atomic number which is 5
Thus, N = 11 - 5 = 6
A student dissolves 0.75 mol NaCl in 3.55kg water. What is the molality of the resulting solution?
A) 10.32 m
B) 0.211 m
C) 68.2 m
*please help
Answer:
B) 0.211 M
Explanation:
Write the nuclear equation for the beta decay
of calcium-45.
Answer:
on https://www.ck12.org/book/peoples-physics-concepts/section/20.1/
Explanation:
it shows for calcium 45 and maybe a possible equation on 3/4th's scroll down?
Is salt pure or impure
Answer:
pure
Explanation:
because there no additional substance
the ending of a compounds name that is made up of three elements,one of which is oxygen
Answer:
—COOH
Explanation:
—COOH, acid group, containing 3 elements, C, carbon, O, oxygen, and H, hydrogen.
A 16.4L sample of NO2(S) has a density of 1.89 g/L. What is the mass of the sample NO2(s)?
A) 31.0 grams
B) 14.5 grams
C) 8.68 grams
D) 0.115 grams
Answer:
A. 31.0
Explanation:
Remember the formula [tex]Density = \frac{mass}{Volume}[/tex], or [tex]D=\frac{m}{V}[/tex].
The problem tells us that the density is 1.89 g/L, and that the volume is 16.4 L.(Remember that if the units are in some form of liters, it is volume, similar to how if the units are in grams, it is mass.)
Plug in the numbers for density and volume, and you will get:
[tex]1.89=\frac{m}{16.4}[/tex]
Then, multiply both sides by 16.4 to get:
m = 30.996 g ≈ 31.0 g
Hope this helps!
A child sits on a partially filled balloon and decreases the volume by half. What happens to the pressure inside of the balloon?
It increases
It decreases
It stays the same
**Check for proof photos at the bottom.**
**Answers are in bold.**
__________________________________________________________
A child sits on a partially filled balloon and decreases the volume by half. What happens to the pressure inside of the balloon?
A. It increases
For the same balloon, how does the density inside the balloon change?
A. increases
A scientist takes a small, partially inflated balloon out of liquid nitrogen (at a very low temperature). As the balloon rests on the table, it begins to grow in size. Which statement(s) best explains why the balloon grows?
B. The air warms and increases particle movement. Increased particle movement leads to increased volume.
C. Increased temperature means increased volume as long as the container is flexible.
__________________________________________________________
Answer the following questions with or without using a calculator.
A balloon contains 1.00 mol helium gas at STP. What will the volume of the balloon be if the pressure increases to 2.00 atm?
✔ 11.2 L
A syringe contains 0.10 mol neon gas at STP. What volume does the syringe indicate?
✔ 2.24 L
A chemist adds 0.10 mol argon gas to the syringe. The pressure and temperature remain constant. What will be the volume on the syringe after the argon is added?
✔ 4.48 L
__________________________________________________________
Acetylene gas (C2H2) reacts with oxygen gas (O2) to produce carbon dioxide (CO2) and water vapor (H2O). How many liters of C2H2 are required to produce 75.0 L of CO2?
37.5 L
What volume of H2O is produced?
37.5 L
What volume of O2 is required?
93.8 L
When making the calculations, did you need to find the number of moles?
✔ no
Liquid carbon disulfide (CS2) reacts with 44.8 L O2 gas to produce the gases carbon dioxide (CO2) and sulfur dioxide (SO2).
What is the mass of carbon dioxide produced?
29.3 g
What is the mass of sulfur dioxide produced?
85.4 g
When making the calculations, did you need to find the number of moles?
✔ yes
__________________________________________________________
Explanation:The child is putting pressure on the balloon, and squishing particles together when he/she sits on it, thus increasing pressure. Since particles are being squished closer together, density also increases.
Inflated objects will grow in size when the air inside is hotter. This is because particles move more rapidly. An example would be bike tires being more inflated under hot conditions.
One mole of any gas at standard temperature and pressure (STP) will occupy 22.4 L. If pressure increases, the volume decreases, and vice versa. If moles decreases, so will the volume, and vice versa.
Here are photos of Edge just incase.
The pressure inside of the balloon will Increase. Hence The correct option is (A).
What is Boyle's Law ?
According to this law, the pressure (p) of a given quantity of gas varies inversely with its volume (v) at constant temperature; i.e., in equation form,
pv = k
Where K = constant.
Initial pressure = P₁Initial volume = V₁Final pressure =P₂Final volume = V₂If we consider that temperature of the gas which filled inside the balloon is constant.
We know that , at constant temperature
P₁V₁ = P₂V₂
Given that
V₂ = V₁ / 2
P₂ = P₁V₁/V₂
P₂ = P₁V₁/V₁/2
P₂ = 2P₁
Therefore, the pressure inside the balloon will become double.Hence The correct option is (A).
Learn more about Gas Law here ;
https://brainly.com/question/12669509
#SPJ2