TILAPIA FISH!!!!!!!!!
Answer:
yes.
................................
You need help with anything??
PLEASE HELP WILL MARK BRAINLIEST
Answer:
36
Step-by-step explanation:
There are 30 red marbles and the ratio of black to yellow is 4/5, so 4/5=orange/green=orange/30.
30 is 6 times 5, so black=6 times 4=24. There are 24 black marbles.
Total of black and yellow=24+30=54.
40% of the marbles are green so 60% are black/yellow. Also 60% is 54 marbles.
60% is 60/100=3/5 so 3/5 of the total is 54 marbles, therefore 1/5 is 54/3=18 and 2/5 is the number of red marbles=2 times 18=36 red marbles.
to be honest i can't think of anything original for the visual thing, but i think the pi chart from the person above me would work well
Answer: 36
Step-by-step explanation: 2/5 of marbles are red, and 4:5 ratio is multiplied by 6 because there are 30 yellow marbles and so 3/5 of the marbles are 54 and 2/5 are 36. For visual model draw a pi chart with 40% red, 33% yellow, and 27% black.
The greatest snowfall in a 24- hour period was 76 inches. Which of these is the same as 76 inches?
A. 6 1/3 feet
B. 2.5 yards
C. 7.6 feet
D. 2 1/3 yards
Answer:
the answer is A. 6 1/3 feet
Step-by-step explanation:
There are 12 inches in a foot. 12 x6=72 r of 4
there are 12 inches in a foot 12÷4=3. 1/3 of a foot
6 + 1/3= 6 1/3
The height, h metres, of a soccer ball kicked directly upward can be modelled by the equation h(t) = -4.9t2 + 13.1t + 1, where t is the time, in seconds, after the ball was kicked. a) How high is the ball after 2 s? 15 b) After how many seconds does the ball reach a height of 0.5 m? /3 21. Determine the inverse function for f(x)=(x - 2), state the domain and range for the function and its inverse. Write each step. 14 22. A farmer has 600m of fencing to enclose a rectangular area and divide 14 into three sections as shown. a) write a equation to express the total area enclosed as a function of the length x. b) Determine the domain and the range of this area function.
a) The height of the ball after 2 seconds is 7.6 metres.
b) The given function is f(x) = (x - 2).
a) The inverse function of f(x) is g(x) = x + 2.
b) A farmer has 600 metres of fencing to enclose a rectangular area and divide it into 14 sections.
a) The total area enclosed can be expressed as a function of the length of the rectangle x as A(x) = 300x - x².
b) The domain of the area function is (0, 300) and its range is [0, ∞).
a) h(t) = -4.9t² + 13.1t + 1 When the time, t = 2 seconds;
the height of the ball, h(t) =h(2) = -4.9(2)² + 13.1(2) + 1= -4.9(4) + 26.2 + 1= -19.6 + 27.2= 7.6 metres
Therefore, the height of the ball after 2 seconds is 7.6 metres.
b) h(t) = -4.9t² + 13.1t + 1When the height of the ball, h(t) = 0.5 metres; we can write the equation as:
0.5 = -4.9t² + 13.1t + 1
Rearranging,4.9t² - 13.1t + 0.5 - 1 = 0i.e. 4.9t² - 13.1t - 0.5 = 0
Solving using the quadratic formula, t = [-(-13.1) ± √(13.1² - 4(4.9)(-0.5))]/(2(4.9))= [13.1 ± √(171.61)]/9.8≈ 0.138 and t ≈ 2.23
Thus, the ball reaches a height of 0.5 metres twice, at approximately 0.14 seconds and 2.23 seconds.
The given function is f(x) = (x - 2).
a) We can find the inverse of a function by interchanging x and y and then solving for y.
Here, f(x) = (x - 2) so we can write it as x = (y - 2)
Interchanging x and y: x = (y - 2)
Solving for y, we get: y = x + 2
Hence, the inverse function of f(x) is g(x) = x + 2.
b) Domain and range of the function and its inverse
The domain of f(x) is all real numbers. (i.e. -∞ < x < ∞)
The range of f(x) is all real numbers. (i.e. -∞ < f(x) < ∞)
The domain of g(x) is all real numbers. (i.e. -∞ < x < ∞)
The range of g(x) is all real numbers. (i.e. -∞ < g(x) < ∞)
The steps of the solution are given below:
Therefore, the inverse function of f(x) is g(x) = x + 2.
The domain of f(x) is all real numbers, and its range is all real numbers.
Similarly, the domain and range of g(x) is all real numbers.
A farmer has 600 metres of fencing to enclose a rectangular area and divide it into 14 sections.
Let x be the length and y be the width of the rectangle.
a) Write an equation to express the total area enclosed as a function of the length x.
Perimeter of the rectangle = Total fencing = 600 metres2(x + y) = 600i.e. x + y = 300
Solving for y, we get:
y = 300 - x
Thus, the area of the rectangle is A(x) = xy = x(300 - x) = 300x - x²
Therefore, the total area enclosed can be expressed as a function of the length of the rectangle x as A(x) = 300x - x².
b) Determine the domain and range of the area function.
The domain of the function is the set of all possible values of x, which in this case is the set of all positive real numbers. (i.e. 0 < x < 300)
The range of the function is the set of all possible values of A(x), which in this case is the set of all non-negative real numbers. (i.e. 0 ≤ A(x) < ∞)
Therefore, the domain of the area function is (0, 300) and its range is [0, ∞).
The steps of the solution are given below:
Therefore, the total area enclosed can be expressed as a function of the length of the rectangle x as A(x) = 300x - x². The domain of the area function is (0, 300) and its range is [0, ∞).
To learn more about domain
https://brainly.com/question/29630155
#SPJ11
Which equation represents the line that passes through the point (3, –1) and is perpendicular to the graph of x + 4y = 10?
Answer:
y=6x+7
Step-by-step explanation:
What is 40x + 4y = 24
Answer:
sorry but your question can't be solved any further because it doesn't have any like termsand you can't add40x and4y together it's impossible unless you multiply
Which rectangular equation represents the parametric equations x =t Superscript one-half and y = 4t? y = 4x2, for x ≥ 0 y = one-fourth x squared, for x greater-than-or-equal-to 0 y = 16x2, for x ≥ 0 y = StartFraction 1 Over 16 EndFraction x squared, for x greater-than-or-equal-to 0
Answer:
Answer is Option A
Step-by-step explanation:
the things people do for points smh :/
The rectangular equation which represents the parametric equations; x = t^(¹/2) and y = 4t is; y = 4x2, for x ≥ 0.
Rectangular Equation from Parametric equationsFrom the task content, it follows that the parametric equations given are;
x = t^(¹/2) and y = 4tHence, it follows that; t = x² and y= 4t
Ultimately, upon substitution of x² for t; the resulting rectangular equation is; y = 4t².
Read more on rectangular equations;
https://brainly.com/question/20338165
Find the distance between the points (–7,–9) and (–2,4).
Answer:
13.93
Step-by-step explanation:
see attached for explanation
will mark brainliest also its not 6 and 5
Help me plz! I need help!
Answer:
function 2
Step-by-step explanation:
i looked at the table, and since t (which is the x-coordinate in this case) was 0, that means that 5.25 is the y-coordinate and is greater than 5 in the first equation.
1. Select all of the situations below that model this fraction. *
Captionless Image
A. 243 people were at the park. 20 people were playing volleyball. How many people were not playing volleyball?
B. Marcy's bookshelf had 20 shelves. She had 243 books. How many books would go on each shelf if she put the same number of books on each shelf?
C. Josh made $243 in 20 days. How much did he earn each day?
D. Sally and Len bicycled 243 miles in 20 days. How many miles did they bicycle each day?
Answer:
A. 223 were not playing volleyball
B. 12 books on each shelf with 3 books left over..
C. 12.15$ a day
D. 12.15 miles per day.
Step-by-step explanation:
A. Subtract 20 from 243.
B. Since books cant be divided into fractions, you take 243 divided by 20, which is 12.15. However, we have to say 12 with 3 leftover because books isn't money, a distance measure, etc. and cannot be cut into pieces.
C. 243 / 20 is 12.15
D. 243 / 20 is 12.15
which relation is also a function
i need help!!!! i have to identify the area and i forgot how to do it and it was due 2 days ago!
Answer: I think B is the answer.
Step-by-step explanation:
Answer:not sure but
Step-by-step explanation: you can multiply each box, so lets say we have 20 times 7cm you multiply that and you get your answer, so put that a side
and once you multiply in each box add the numbers up and that should get your answer and make sure to add the "cm" at the end
9) set 21 and 22 be rings with identities ter and 1R₂, respectively. Prove that the set of all Toleals of R1X22 = $ Il x I₂: It is on Ideal of 21 and is an ideal of R2}.
The Set of all ideals of R₁×R₂, denoted as I₁×I₂, is an ideal of R₁×R₂, and it is also an ideal of R₁ and R₂ separately.
To prove that the set of all ideals of R₁×R₂, denoted as I₁×I₂, is an ideal of R₁×R₂, we need to demonstrate that it satisfies the necessary properties of an ideal.
1. Closure under addition: Let (a, b) and (c, d) be two elements in I₁×I₂. We need to show that their sum, (a, b) + (c, d), is also in I₁×I₂. Since both (a, b) and (c, d) are in their respective ideals, this implies that a+c is in I₁ and b+d is in I₂. Therefore, (a+c, b+d) is in I₁×I₂, showing closure under addition.
2. Closure under scalar multiplication: Let (a, b) be an element in I₁×I₂ and (r, s) be an arbitrary element in R₁×R₂. We need to show that their scalar product, (a, b)(r, s), is in I₁×I₂. Since a is in I₁, and R₁ is a ring with identity, we have ar is in I₁. Similarly, since b is in I₂ and R₂ is a ring with identity, we have bs is in I₂. Therefore, (ar, bs) is in I₁×I₂, demonstrating closure under scalar multiplication.
3. Contains additive identity: The additive identity in R₁×R₂ is (0, 0). Since both I₁ and I₂ are ideals, they contain their respective additive identities. Therefore, (0, 0) is in I₁×I₂.
Since the set of all ideals of R₁×R₂, denoted as I₁×I₂, satisfies closure under addition, closure under scalar multiplication, and contains the additive identity, it meets the definition of an ideal of R₁×R₂.
Additionally, since I₁×I₂ is a subset of both I₁ and I₂, it is an ideal of R₁ and R₂ individually.
In conclusion, the set of all ideals of R₁×R₂, denoted as I₁×I₂, is an ideal of R₁×R₂, and it is also an ideal of R₁ and R₂ separately.
To know more about Set .
https://brainly.com/question/13458417
#SPJ8
The second quartile for the numbers:
231,423,521,139,347,400,345 is
A 231
B 347
C 330,
D 423
Which of the following measures of variability is dependent on every value in a Set of data?
A Range
B. Standard deviation
C A and B
D. Neither A nor B
Which one of these statistics is unaffected by Outliers?
A Mean
B. Interquartile range
C Standard deviation
D. Range
The second quartile for the numbers 231, 423, 521, 139, 347, 400, 345 is 347. The median value is the second quartile
. So, when the numbers are arranged in ascending order, 347 is in the middle.
The following measures of variability is dependent on every value in a Set of data:
Standard deviation is the measure of variability that is dependent on every value in a Set of data.
Standard deviation is a measure that is used to quantify the amount of variation or dispersion of a set of data values.
Among these statistics, the Interquartile range is unaffected by outliers. The IQR is the distance between the first quartile (Q1) and the third quartile (Q3), which represents the middle 50% of the data.
The interquartile range (IQR) is unaffected by outliers because it only uses the values of the data points located at the 25th and 75th percentile of the data set to measure variability.
Learn more about quartile at:
https://brainly.com/question/28568915
#SPJ11
What is the best definition for “sample” as used in statistics?
the entire population of the group
a part of the population that represents the entire population
the difference between the maximum and minimum values observed
a measure of how much the values within a population vary
Answer:
a part of the population that represents the entire population
Step-by-step explanation:
Answer:
I think it is the second option
I hope it helps you
please help me find the area
Answer: 150m
Step-by-step explanation: you first remove 5 from 20 to get what you should multiply for your triangle then you get 15 and multiply it by 12 to get 180 then you divide by 2 since it’s a triangle, to get 90 then you find the area of the rectangle by multipling 5 by 12 to get 60 then 60+90=150
Answer:
150 meters
Step-by-step explain
He formula for a triangle is a=bh/2. it ends up being a=12x15/2=90.
The formula for a rectangle is 12x5=60.
You take both and add them together and you get 150.
So the answer is 150 meters.
Solve the system of equations given by elimination:
{y = -x + 1
{y = 4x – 14
A. (-3, 2)
B. (-3,-2)
C. (3,2)
D. (3,-2)
Answer:
y= -x+1
y=4x_14
solution
-x+1=4x-14
-x-4x= -14-1
-5x= -15
-5x/-5= -15/-5
x=3
while y=4x-14
y=4(3)-14
y=12-14
y= -2
To test the hypothesis that the population standard deviation sigma 12.1, a sample size n=7 yields a sample standard deviation 10.394. Calculate the P- value and choose the correct conclusion. Your answer: The P-value 0.016 is not significant and so does not strongly suggest that sigma<12.1. The P-value 0.016 is The P-value 0.016 is significant and so strongly suggests that sigma<12.1. The P-value 0.381 is not significant and so does not strongly suggest that sigma<12.1. The P-value 0.381 is O significant and so strongly suggests that sigma<12.1. The P-value 0.021 is not significant and so does not strongly suggest that sigma<12.1. The P-value 0.021 is significant and so strongly suggests that sigma<12.1. suggests that sigma<12.1. The P-value 0.015 is not significant and so does not strongly suggest that sigma<12.1. The P-value 0.015 is significant and so strongly suggests that sigma<12.1. The P-value 0.199 is not significant and so does not strongly suggest that sigma<12.1. The P-value 0.199 is O significant and so strongly suggests that sigma<12.1.
The calculated p-value is 0.016, which is significant. However, it does not strongly suggest that the population standard deviation (sigma) is less than 12.1.
In hypothesis testing, the p-value is used to determine the strength of evidence against the null hypothesis. In this case, the null hypothesis is that the population standard deviation (sigma) is equal to 12.1. The alternative hypothesis would be that sigma is less than 12.1.
A p-value of 0.016 means that if the null hypothesis were true (sigma = 12.1), there is a 1.6% chance of obtaining a sample with a standard deviation of 10.394 or lower. Typically, a p-value below a chosen significance level (e.g., 0.05) is considered statistically significant. However, in this case, the p-value of 0.016 is still relatively close to the significance level, indicating a moderate level of evidence against the null hypothesis.
Therefore, based on the given information, we can conclude that the p-value of 0.016 is significant, but it does not strongly suggest that the population standard deviation is less than 12.1. Strong evidence would require a smaller p-value, further away from the significance level, to support the alternative hypothesis.
Learn more about deviation here:
https://brainly.com/question/29758680
#SPJ11
Please help me
Find the surface area
If you can explain to that would be great if not that’s fine
4 m
12 m
18 m
Answer
672 meters²
Step-by-step explanation:
2×(18×12 + 18×4 + 12×4) = 672 meters²
hope this helps :))
Guided Practice
Find the square.
(c + 1)2
A.
c2 + 1
B.
c2 + c + 1
C.
c2 + 2c + 1
Answer:
C
Step-by-step explanation:
(c + 1)(c+1) = c² + c + c + 1 = c² + 2c + 1
Let A = {a,b,c}, B = {1, 2, 3, 4), and C = {w, x, y, z), and let R= {(2, 1), (6, 3), (6, 4), (C, 3)} and S = {(1, y), (1, 2), (2, w), (3, z)}. What is the composition relation ( RS) of R with S?
The pair (6, 3) in R, (6, 4) in R, and (C, 3) in R couldn't be matched with any pair in S, so they are not included in the composition relation RS.
To find the composition relation RS of R with S, we need to combine the ordered pairs in R and S in a way that the second element of each pair in R matches the first element of the pair in S.
Let's perform the composition:
R = {(2, 1), (6, 3), (6, 4), (C, 3)}
S = {(1, y), (1, 2), (2, w), (3, z)}
To form RS, we match the second element of each pair in R with the first element of each pair in S:
(2, 1) in R matches with (1, y) in S, so we combine them to form (2, y).
(2, 1) in R matches with (1, 2) in S, so we combine them to form (2, 2).
(6, 3) in R doesn't match with any pair in S.
(6, 4) in R doesn't match with any pair in S.
(C, 3) in R doesn't match with any pair in S.
Therefore, the composition relation RS is: RS = {(2, y), (2, 2)}
The pair (6, 3) in R, (6, 4) in R, and (C, 3) in R couldn't be matched with any pair in S, so they are not included in the composition relation RS.
To learn more about composition relation visit:
brainly.com/question/32048396
#SPJ11
Here is an equation and all the steps Clare and Lin took to solve it. Are both of their solutions correct? Explain your reasoning.
Answer:
Both solutions are correct
Step-by-step explanation:
Given
Expression:
[tex]14x - 2x +3 = 3(5x + 9)[/tex]
See attachment for Clare and Lins' solution
Required
Determine if they are correct or not
[tex]14x - 2x +3 = 3(5x + 9)[/tex]
Open bracket
[tex]14x - 2x + 3 = 15x + 27[/tex]
Collect like terms
[tex]14x - 2x -15x = -3 + 27[/tex]
[tex]-3x = 24[/tex]
Divide by -3
[tex]x = \frac{24}{-3}[/tex]
[tex]x = -8[/tex]
Both solutions are correct
help plsss. marking brainliest
Answer:
1. 3
2. 1
Step-by-step explanation:
Answer:
1.3. now mark brainlieet plsssssssssss like you said you would
The graph of the function f(x) = ax^2 + bx + c has vertex at (0, 2) and passes through the point
(1, 8). Find a, b and c
Answer:
Step-by-step explanation:
You need to use vertex form of a quadratic to solve this.
Consider the vertex to be [tex](h,k)[/tex]
Another way of representing a quadratic is in "vertex form":
[tex]f(x) = a(x-h)^2+k[/tex]
Now all you have to do is solve for a. You know that the vertex is [tex](0,2)[/tex] and you have know the point of [tex](1,8)[/tex]. Now, all you have to do is plug in these values and solve for a.
[tex]8 = a(1-0)^2+2\\8=a(1)^2+2\\8=a+2\\a=6[/tex]
Now you know the equation is [tex]f(x) = 6(x-0)^2+2[/tex] , but you need it in quadratic form. All you have to do is solve is distribute the 6:
[tex]6x^2+2[/tex]
You get:
a = 6
b = 0
c = 2
Please mark this as brainliest if it satisfies your question
predictive modelling and lifetime value modelling are the same
True or False
The given statement, "predictive modelling and lifetime value modelling are the same" is false. What is Predictive Modeling?
Predictive modeling is a technique for forecasting the probability of a certain event taking place in the future. It entails using current and past data to forecast the future events. In predictive modeling, you use known outcomes of historical data to determine whether specific patterns are likely to recur in the future. What is Lifetime Value Modeling? Lifetime Value Modeling is a method of forecasting the long-term earnings and profit of a business. It's a strategy for calculating the cumulative amount of profit generated by a customer over the life of their relationship with a company. Lifetime Value Modeling is used to decide the most effective ways to engage with consumers, such as personalized deals or special promotions, to maximize their lifetime value to the company by encouraging them to purchase more often and spend more during each transaction.
Predictive modeling and lifetime value modeling are distinct concepts that serve different purposes. Predictive modeling is used to forecast the future occurrence of specific events, whereas lifetime value modeling is used to calculate the long-term value of a customer to a company. So, the given statement is false.
To know more about Predictive modeling, click here:
https://brainly.com/question/30713681
#SPJ11
Let be a fixed vector in and vector be a solution to where Q is a m*n matrix.
Prove every solution to the equation is in the form?
Given a fixed vector b and a vector x is a solution to Qx = b, it is required to prove that every solution to the equation is in the form x = xh + xp where xh is a particular solution to Qx = b and xp is a solution to the equation Qxp = 0.
Let xh be a particular solution to Qx = b, so that Qxh = b.
Now consider the homogeneous equation Qx = 0.
This is an m × n system of homogeneous linear equations in the n unknowns x1, x2, ..., xn, whose coefficient matrix is Q.
Since xh is a solution to the equation Qx = b, it follows that the equation Q(x - xh) = Qx - Qxh = b - b = 0.
This means that x - xh is a solution to the homogeneous equation Qx = 0.
Now any solution to Qx = b is of the form x = xh + xp, where xp is any solution to the homogeneous equation Qxp = 0.
Thus, every solution to the equation is in the form x = xh + xp, as required.
Know more about vectors:
https://brainly.com/question/24256726
#SPJ11
helpppppppp will b marked brainliest!!!!!!!!!! Which system of equations is represented in the graph?
a. y= -2 x-2y=6
b. y= -2 x+2y=6
c. y= -2 2x-y= 3
d. y= -2 2x+y= -3
Answer: d. y= -2 2x+y= -3
Step-by-step explanation: Hope this help :D
please answer this for me?
Answer:
n/a
Step-by-step explanation:
how does it feel
Pls someone help me
Answer:
Step-by-step explanation:
455