"The direction of the current."
A solenoid's north and south poles are determined by two variables. two factors: the winding direction and the direction in which the stream flows (clockwise or counter-clockwise). The positive pole of the power source (such as a battery) should be determined first, followed by the end of the solenoid that will be connected to it.
Now, determine which way the winding is going by peering down the solenoid tube. The south pole is present if the positive wire is rotated clockwise, and the north pole is present if it is rotated counterclockwise. In conclusion, the magnetic south pole is always in reference to the positive wire clockwise.
The magnet's poles will be created as a result of current flowing through the solenoid, and the clock face rule in a solenoid is used to predict their positions. According to the rule, the south pole will be formed if you gaze through a solenoid at a location where the current runs in a clockwise direction. On the other hand, the north pole will be visible if viewed from the side where the current is flowing counterclockwise.
To know more about solenoid, click on the link below:
https://brainly.com/question/25484149
#SPJ9
A particle executing SHM along a straight line has a velocity of 4cm/s, when at a distance of 3cm from its mean position and 3cm/s, When at a distance of 4cm from it. Find the time it takes to travel 2.5cm from its mean position.
The time it takes to travel 2.5cm from its mean position is 1.048 secs.
Describe the mean position.When there is no net force exerted on the body, it is in the mean position, sometimes referred to as the equilibrium position. An oscillating particle's phase: This shows how the particle is vibrating right now.
Given,
case(1), V1=4ms−1,y1=3m,
case(II), V2=3ms−1,y2=4m.
We know that, V=ω√( a^2−y^2 )
Case (I) 4=ω√(a^2−3^2)..(i)
Case(II) 3=ω√(a^2−4^2) …(ii)
Dividing (i) by (ii) , we get
16a^2−256=9a^2−81
After solving we get,
a=√25 =5m
Substituting it in (i), we get
ω= 4 / 4 = 1 rads^−1
When the particle is 2.5 meters from the extreme location, its distance from the mean position is given by the equation x = 5−2.5 = 2.5m.
Given that SHM must note the time from an extreme point, we will apply the relation:
x=acosωt.
2.5= 5cos 1 × t = 5 cos t
=> cost = 2.5/5 = 1/2 = cos ( [tex]\pi[/tex]/3 )
=> t = [tex]\pi[/tex] / 3 = 22 /7 x 3 = 1.048 secs
To learn more about SHM click on the link below:
https://brainly.com/question/28021321
#SPJ9
This is the 6th question. other 5 questions in a different one. will mark brainliest. need asap. thank you
The acceleration of an object is directly proportional to the force applied and inversely proportional to its mass.
If the same force is used to move all four masses, they will experience the same different accelerations since their masses differ.
According to Newton's second law, the greater the force used to throw the ball, the greater the ball's acceleration.
If forces, F, are equal, the acceleration of the wagons should be different.
If force, F, is the same for both cars, then you know the mass of Car A is less than the mass of Car B.
To move the wagons at the same speed you must use a much greater force, F on the bottom wagon because it has a greater overall mass.
What is the relationship between the force, mass, and acceleration of an object?According to Newton's second law of motion, the acceleration of an object is directly proportional to the applied force and inversely proportional to the mass of the object.
Therefore, the greater the mass of an object, the greater will be the force required to produce the acceleration as in an object of smaller mass.
Learn more about mass and acceleration at: https://brainly.com/question/19710581
#SPJ1
little girl tosses an apple up toward a boy in a tree with an initial velocity of 8.50 m/s at 72o.
A. What is the maximum height reached by the apple
The maximum height reached by the apple thrown with an initial velocity of 8.50 m / s at 72° is 6.65 m
H = u² sin²θ / g
H = Maximum height
u = Initial velocity
g = Acceleration due to gravity
u = 8.5 m / s
g = 9.8 m / s²
θ = 72°
H = 8.5² sin² ( 72° ) / 9.8
H = 72.25 * 0.9 / 9.8
H = 6.65 m
If an object is thrown with an initial velocity at angle with the ground, it will move in a projectile motion. The object thrown is called as a projectile.
Therefore, the maximum height reached by the apple is 6.65 m
To know more about projectile motion
https://brainly.com/question/11049671
#SPJ1
A 1.20-kilogram frog is at rest on the bank surrounding a pond of water. As the frog leaps from the bank, the magnitude of the acceleration of the frog is 3.0 meters per second2 . Calculate the magnitude of the net force exerted on the frog as it leaps.
Force is the product of mass and acceleration, the magnitude of the net force exerted on the frog as it leaps is 3.6 N
What is Force ?Force can be simply defined as a pull or push. It is the product of mass and acceleration. And it is measured in Newton.
Given that a 1.20-kilogram frog is at rest on the bank surrounding a pond of water. As the frog leaps from the bank, the magnitude of the acceleration of the frog is 3.0 m/s² . The magnitude of the net force exerted on the frog as it leaps will be
F = ma
Where
m = 1.2 Kga = 3 m/s²Substitute the two parameters into the formula.
F = 1.2 × 3
F = 3.6 N
Therefore, the magnitude of the net force exerted on the frog as it leaps is 3.6 N
Learn more about Force here: https://brainly.com/question/12970081
#SPJ1
What is the name of the seismic wave that is the first to occur during an earthquake? A. S wave B. Surface wave C. P wave
P waves are first to occur during an earthquake.
There are two types of earthquake waves based on the medium of travel.
1.Body waves- these waves travel through the solid part of earth crust.
2.Surface waves- these waves travel on earth's surface.
Body waves are divided into two types of waves i.e., P waves (primary) and S waves (secondary).
1.P waves (primary waves)- these are the fastest seismic waves which travel through the earth crust. P waves are the first waves to reach any location when an earthquake occurs.
2.S waves (Secondary waves)- these waves are second fastest waves after primary waves to reach a location when the earthquake occurs. S waves have half speed than that of P waves.
To know more about earthquake waves, follow the link below.
https://brainly.com/question/26489416
#SPJ4
3) A kid finds a super creepy doll and immediately chucks it off a cliff that is 72 meters high. The
super creepy doll flies 51 meters before it hits the ground. DRAW A PICTURE.
A) How long does it take for the super creepy doll to hit the ground?
B)At what horizontal velocity did the kid throw the doll
It takes 13.22 m/s as the horizontal velocity with which the kid throw the doll and the doll takes 3.77 seconds to hit the ground.
What is velocity and how it comes out to be 3.77 m/s ?As studied earlier the velocity is the change in the displacement per unit time of the object.Here it is given that the cliff is 70m high. And the doll flies 51 meters before it hits the ground.The flight edge 70m x 50m , using second equation of motion we can clearly see the displacement is equal to initial velocity.Accordingly putting in equation , {2x70/9.8}^1/2 and this will come out to be 3.77 seconds.For finding horizontal velocity using second equation of motion, from here we can say that the initial horizontal velocity is 13.22 m/s with which the kid threw the doll.To know more about velocity visit:
https://brainly.com/question/18084516
#SPJ9
if length of a wire is doubled keeping the diameter constant ,its young modulus of elasticity will?
i) increases
ii)decreases
iii)remains same
iv)depends on nature of matter
Answer:
Explanation:
Young's modulus is the property of the material and it does not depend upon the length or the area of the cross-section.
Hence, The most correct answer will be option (iii) but youngs modulus also depends upon the nature of the matter if you have to answer multiple option then (iii) and (iv) both are correct. If you have to answer only single option then go for option (iii).
how much work is required to lift a 360 kilogram piano to a window whose height is 10 m from the ground
So, the work required to lift the piano is 36 kJ from the ground.
What connection exists between energy and work?An item needs to receive energy in order to move. Force is one way that energy may be transferred. Work or work done refers to the quantity of energy used by a force to move an item.
Transferring energy into an item to cause some displacement is what is referred to as work. The ability to perform tasks is referred to as energy. The work is consistently the same. Kinetic and potential energy are two examples of the various forms of energy.
The quantity of internal and mechanical energy that things contain fluctuates as a result of work. Energy is contributed to a system or an item when work is done on it. When a system or thing performs labour,
Learn more about energy and work refer
https://brainly.com/question/1634438
#SPJ10
What does mass of an object depend on
Answer:
the inertia of an object
3. Alice and Kai were playing air hockey, which is a game where players hit a puck with paddles so the puck slides across
a table. After the game, they were crashing the puck and two different paddles. The puck was the same in both crashes,
but the paddles were different: the red paddle had less mass, while the purple paddle had more mass. Use the
information in the diagram to answer.
In which crash did the puck experience a stronger force? Why?
The crash in which the puck experience a stronger force is Crash 2 because the force on the purple paddle was stronger in this crash, so the force on the puck was also stronger. That is option B.
What is force?Force is defined as the pull or a push that is experienced by an object when it passes through a distance.
According to Newton's second law of motion that states that the force on an object is equal to its mass times its acceleration.
Therefore, force can also be defined as the product of mass and acceleration. That is, F = mass× acceleration.
This shows that force is directly proportional to mass. Therefore increase in the mass of an object will require more force to bring about its movement.
Therefore, the purple paddle has a greater mass with a stronger force leading to a stronger crash.
Learn more about force here:
https://brainly.com/question/25239010
#SPJ1
Complete question's options:
The puck did not experience a force; only the paddles experienced a force in the crashes.
Crash 2; the force on the purple paddle was stronger in this crash, so the force on the puck was also stronger.
The diagram doesn’t tell you anything about the force on the puck. It only gives information about the force on the paddles.
The puck experienced the same force in both crashes. The paddles changed speed by the same amount in each crash, so the force on the puck was the same each time.
An engineer wants to calculate how high a rocket starting from rest will be when it
reaches a velocity of 6,500.0 m/s with an acceleration of 389.00 m/s How the rocket be when it meets these conditions?
A moving object's speed and direction vary over time at a certain rate, which is known as acceleration. The term "acceleration" refers to the change in speed of a point or object along a straight line. Due to the constant change in direction, motion on a circle accelerates even while the speed is constant.
Velocity is measured by a specific unit of time and from a specific point of view, and it describes the rate at which an object's orientation changes while it is moving.
The term "Distance Traveled" describes how far an object has travelled during a specified amount of time to get to its destination. Or The path that a body takes to travel a specific distance at a certain speed from one location to another is known as the distance travelled.
Using,
Avg. acceleration (a) = (final velocity - initial velocity(v_i)) / time (t)
time = 6500 / 389 = 16.71 sec
Now, the following equation can be used to determine distance from acceleration: D = v*t + 1/2*a*t². where an is the acceleration, t is the passage of time, and v is the velocity.
D = distance travelled = 54309 m
To know more about circumstances of the rocket, click on the link below:
https://brainly.com/question/8892118
#SPJ9
URGENT!! ILL GIVE
BRAINLIEST! AND 100 POINTS
The chemical equation shown below is not balanced (it does not follow the Law of Conservation of Matter).
The answer is 2 because the Hydrogen atom on the right needs 2 to balance with the one on the left
Who did experiments with light , known as the double-slit experiments, to produce interference patterns that could only be explained by evoking a wave-like nature for light?.
Thomas Young did the experiments with light , known as the double-slit experiments, to produce interference patterns that could only be explained by evoking a wave-like nature for light.
What is the double-slit experiment?
Thomas Young an English physicist, was the first to perform the double slit experiments. The experiment involved passing light through two tiny slits, thereby producing an interference pattern that could not be reconciled with the corpuscular view of light. Thus, the findings of Thomas Young supported the hypothesis that light consists of waves rather than particles.
Learn more on the double-slit experiment from:
https://brainly.com/question/17138139?referrer=searchResults
#SPJ4
a 74-kg base runner begins his slide into second base when he is moving at a speed of 4.8 m/s. the coefficient of friction between his clothes and earth is 0.70. he slides so that his speed is zero just as he reaches the base.
The work energy of speed is
1304.2 .
What is work energy?
work energy is the most fundamental quantity of physics . Work is said to be done when a force applied to an object cause a displacement of a object.
Solution -
As per the given-
Mass of runner m = 74kg
Initial velocity of runner u=4.8 m/s
Final velocity of runner v =0
Coefficient of friction ¥=0.7
Let's d be the distance moved by runner till the stop.
a- mechanical energy lost due to friction
As friction does negetive work causing the runner to stop.
As we know,
Mechanical energy lost= Kinetic energy of runner
Mechanical energy lost =
1/2 mv^2 = 1/2 ×74×4.8^2=852.2
Distance move by runner-
Work done by friction = mechanical energy lost
-¥×mg×d =852.2 j
-0.7×74×9.8×d = -491.2
Solving the equation we get
1304.2.
To know more about work energy click-
https://brainly.com/question/10063455
#SPJ9
Iridium is a substance found only in asteroids and other space objects. This graph shows the amount of Iridium found in different sediment layers of Earth. They are marked off into 17 sections representing time.
Iridium Levels graph shows Iridium levels in sediment layers. Beginning at sediment layer 1, iridium levels remain between 0 and 5, jumping to a level of 23 between layers 5 and 6, and decreasing to near starting levels at layers 14 through 17.
What most likely happened in sediment layer 5?
A massive volcano erupted, causing global warming and lava flow, which in turn caused mass extinction.
More iridium was produced by space objects and dumped by local factories.
The impact of a space object led to the deposit of a layer of sediment high in iridium.
Fewer impacts lead to a drop in iridium levels and a mass extinction caused by a lack of sunshine.
The most likely thing that happened in the sediment layer 5 is that A. The massive volcano erupted, causing global warming and lava flow, which in turn caused mass extinction.
What is the information about?The element iridium is only present in asteroids and other outer space objects. The amount of iridium present in various Earthly sediment layers is depicted an divided into 17 portions to illustrate the passage of time.
Iridium is a plentiful element in outer space, especially in asteroids. The Alvarez Hypothesis provides support for this response. The most potent nuclear bomb ever exploded only released a fraction of the energy that a large asteroid that struck the earth would have.
Global flames caused by this heat made the earth completely dark.
The creation of a dust cloud was the cause of this obscurity. The lack of sunshine also caused the vegetation to disappear, which in turn led to a global extinction.
In conclusion, the correct option is A.
Learn more about iridium on:
https://brainly.com/question/24818135
#SPJ1
URGENT!! ILL GIVE
BRAINLIEST! AND 100 POINTS
What element is shown below?
3. Find the resultant of the following two displacements 2m at 30⁰ and 4m
at 120⁰. The angles are taken relative to X - axis.
2m
K.
30⁰
4m
600
120°
The resultant of the two displacements 2m at 30⁰ and 4m
at 120⁰ is 93.4 degree.
Describe displacement.Displacement is the process of removing something from its usual location or position and substituting another object in that space.
Given: The sum of the displacements at 30 degrees and 120 degrees, respectively, is 2 meters.
Currently, there are two displacements, which
R1 = 2 cos 30 – 4 cos 60
= 2 x √3 / 2 – 4 x 1 / 2
= √3 - 2
= 1.732 - 2
= - 0.268 m
R2 = 2 sin 30 + 4 sin 60
= 2 x 1/2 + 4 x √3 / 2
= 1 + 2 √3
= 1 + 2 (1.732)
= 1 + 3.464
= 4.464 m
Now R = √R 1^2 + R2^2
= √(-0.268)^2 + (4.464)^2
= √0.0718 + 19.927
= √19.999
= 4.472 m
Now tan Q = R 2 / R1
= 4.464 / - 0.268
= - 16.656
Or Q = - 86.6 degree
Now the outcome will be 180 – 86.6 = 93.4 degree
To learn more about displacement click on the link below:
https://brainly.com/question/321442
#SPJ9
An A. C is supply is
Connected accross a Capacitor
of 5 nf R=50_n in series at 50ttz find the;
Capacity rectance
Pedance
Supply Current
Vortage a cross the capacity
Answer:
d
Explanation:
a 1,900-kg pile driver is used to drive a steel i-beam into the ground. the pile driver falls 4.80 m before coming into contact with the top of the beam, and it drives the beam 13.4 cm farther into the ground as it comes to rest. using energy considerations, calculate the average force the beam exerts on the pile driver while the pile driver is brought to rest.
The average force of the beam expert is 648,365.
What is average force?The force delivered to a body traveling at a specific speed for a specific amount of time is known as the average force. Since it possesses both momentum and direction, it is primarily a vector quantity. It differs between momentum and net force.
Average force is the force exerted by a body moving at a specific speed for a specific amount of time.
mass of pile driver (m) = 1900 kg
distance of pile driver to steel beam (s) = 4.80m
depth of steel driven (d) = 13.4= 0.134 m
acceleration due to gravity (g0 = 9.8 m/s^{2}
calculate the average force exerted on the pile driver by the beam.
from work done = force x distance
work done = change in potential energy of the pile driver
equating the two equations above we have
force x distance = m x g x (s - d)
f x 0.134= 1900 x 9.8 x (4.80- (-0.134))
d = - 0.134because the steel beam went down at we are taking its
initial position to be an origin point which is 0
f = ( 1900x 9.8 x (4.80- (-0.134)) ) ÷ 0.134
=648,365
To know more about average force click -
https://brainly.com/question/18652903
#SPJ9
robots use cameras, microphones, and other sensors as inputs; outputs can be as complex as exploring damaged nuclear reactors to as simple as taking a photo.
Robots use cameras, microphones, and other sensors as inputs; outputs can be as complex as exploring damaged nuclear reactors to as simple as taking a photo.
What is a Robot?This is referred to as a machine which in most cases resembles a human being and it is involved in the execution of complex tasks in an automated manner such as lifting an object etc.It is usually controlled using a computer and employs the use of input devices such as cameras, microphones etc which ensures adequate and an easy execution of the tasks.
The output is also usually complex and the comparison is with that of a damaged nuclear reactors and this technological innovation has been useful in different facets of life due to the ease of performing activities it brings.
Read more about Robots here https://brainly.com/question/13515748
#SPJ1
The question is:
The functions of robots, cameras, microphones, and other sensors as inputs include:
Using energy considerations, calculate the average force a 60. 0-kg sprinter exerts backward on the track to accelerate from 2. 00 to 8. 00 m/s in a distance of 25. 0 m, if he encounters a headwind that exerts an average force of 30. 0 n against him.
Answer:
−102 N
Explanation:
Hope this helps.
neglecting air resistance, after a rock thrown straight up reaches the top of its path and then falls a short distance, its acceleration is group of answer choices more than at the top of its path. the same as at the top of its path. less than at the top of its path.
if a rock is thrown straight up and falls, then its acceleration is the same as at the top of its path and it is equal to g, the gravitational acceleration.
If an object is moving straight vertically, the acceleration is constant along its trajectory, either it moves upward or downward. It is the velocity that changes.
If the object is moving upward, the velocity decreases, until at the top position, the velocity is equal to zero. The acceleration is constant and it is equal to g, the gravitational acceleration.
v(t) = vo - gt
Where:
v(t) is the velocity at time t
vo is the initial velocity
If the object is moving downward, the velocity increases. Again, the acceleration is constant and it is equal to g, the gravitational acceleration.
v(t) = vo + gt
This situation is depicted on the attaches picture.
Hence, if a rock is thrown straight up and falls, then its acceleration is the same as at the top of its path and it is equal to g, the gravitational acceleration.
Learn more about acceleration here:
https://brainly.com/question/88039
#SPJ4
A blimp is travelling above the surface of Jupiter at a height of 3.9km. Assuming g on Jupiter is 24.5N/kg, find the mass of the blimp if its gravitational potential energy store is 2.8MJ.
Explanation:
what does kinetic theory of matter state
a block with mass m1 is placed on an inclined plane with slope angle α and is connected to a second hanging block that has mass m2 by a cord passing over a small, frictionless pulley. the coefficient of static friction is μs and the coefficient of kinetic friction is μk
The mass m2 for which block m1 moves up the plane at constant speed once it is set in motion is:
m2 = m1 (sinα + μkcosα)
The tension in the cord should be [tex]m_{2}[/tex]g so the that the hanging block over a frictionless pulley can move at constant speed. This tension in the cord should the component of gravitational force and the force of friction.
Now
[tex]m_{2}[/tex]g = ([tex]m_{1}[/tex]g(sinα) +μk([tex]m_{1}[/tex]g)cosα)
[tex]m_{2}[/tex]g = [tex]m_{1}[/tex]g(sinα +μkcosα)
[tex]m_{2}[/tex] = [tex]m_{1}[/tex] (sinα + μkcosα)
So the mass [tex]m_{2}[/tex] for which m1 moves up the plane at constant speed once it is set in motion is:
m2 = m1 (sinα + μkcosα)
If you need to learn more about questions related to frictionless pulley, click here
https://brainly.com/question/15522144?referrer=searchResults
#SPJ4
What electric field e′ would have been required to create a current of 30. 0 amperes in a copper gauge 10 wire with diameter d equal to 0. 259 centimeters?.
The required electric field is 9.58 × 10⁻² N/C
We know that the electric field, E is a product of resistivity and current density
∴ E=jρ ......(i)
Where ρ⇒ Resistivity
j ⇒ Current density
j = I/A
Now, as per the question,
Resistivity of copper, ρ = 1.68 × 10⁻⁸ Ωm
Current, I = 30 ampere
Diameter = 0.259 cm = 0.00259 m
So, Radius, r = Diameter/2
= 1.295 × 10 ⁻⁴m
Now, Cross-sectional area, A = πr²
= 3.14 × (0.001295)²
= 5.26 × 10⁻⁶ m²
Putting the values in equation (i), we get:
[tex]E = 1.68 \times 10^{-8} \times\frac{30}{5.26 \times 10^{-6} }[/tex]
[tex]E= 9.58 \times 10^{-2} N/C[/tex]
Therefore, the required electric field is 9.58 × 10⁻² N/C
Read more about Electric field:
https://brainly.com/question/14972426
#SPJ9
8. Which statements are true about why wind tends to blow from over the water to over the land on a sunny day? Highlight all the statements that apply.
A. Air over the water is cooler than air over the land is.
B. The air above the land has greater density.
C. The wind is caused by differences in density.
D. Cool, dense air from over the water flows toward the land, pushing warm air upward.
Wind tends to blow from over the water to over the land on a sunny day because air over the water is cooler than air over the land is, the wind is caused by differences in density and the cool, dense air from over the water flows toward the land, pushing warm air upward. Making option A, C, and D the right answer to the question.
What is sea breeze?
The phenomenon where wind tends to blow from over the water to over the land on a sunny day is referred to as sea breeze.
The heat from the sun heats up the faster than water. Subsequently, air over land heats up faster than air over water, thus air above land becomes lighter causing the pressure to decrease.
In summary, Option B is wrong because the air above the land has a lesser density compared to the air above the water, and this is due to the characteristics of the wind blowing from a higher pressure area to a lower pressure area.
Learn more about sea breeze here: https://brainly.com/question/7380142
#SPJ1
Pls solve answer with explanation.. physics problem
Answer:
9Ms correct answer ???????????//?
PLS HELP, I DIDN'T KNOW THIS WAS DUE UNTIL I CHECKED-AND IM WORKING ON MY OTHER 5 HOMEWORK ASSIGNMENTS, SO I DONT HAVE TIME TO DO THIS!!! I just need the answers you don't need to go into full detail! I'LL GIVE BRAINLIEST!!!
Proton has positive charge whereas neutron has no charge.
What are the difference between a proton and neutron?Proton is a type of subatomic particle that has a positive charge whereas Neutron is a type of subatomic particle that has no charge.
An atom that has lost one or more number of electrons is known as anion.
Isotopes is defined as an element that have the same number of protons i.e. atomic number but different numbers of neutrons i.e. mass number.
Electron is located outside the nucleus of an atom.
Fluorine is that atom which has 9 number of protons so its atomic number is 9.
Atomic number is related to the number of particles in the nucleus of an atom because in the nucleus, proton is present which shows the atomic number of an atom.
There are three parts of an atom i.e. proton, electron and neutron.
The size of electron is about 2 × 10⁻¹⁰ cm, The size of proton is about 0.84×10⁻¹³ cm and the size of neutron is about 1.7×10⁻¹⁵ meters
Electron has negative charge, proton has positive charge and neutron has no charge.
Yes, we can tell about the element if we know about the charge and the number of electrons in it because different atoms has particular number of electrons.
The diameter of a nucleus in scientific notation is 1.6 x 10⁻¹⁵.
The mass of hydrogen atom in whole number is 0.00000000000000000000000000167.
Learn more about electron here: https://brainly.com/question/860094
#SPJ1
at what times t is the turtle a distance of 10.0 cm from its starting point? what is the velocity (magnitude and direction) of the turtle at each of those times?
a railcar with an overall mass of 72,000 kg traveling with a speed vi is approaching a barrier equipped with a bumper consisting of a nonlinear spring whose force vs. compression law is given by fs
According to Hooke's law, the applied force F equals the displacement or change in length x multiplied by a constant k, or F = kx. The value of k is determined not only by the elastic material, but also by its dimensions and shape.
What is the force definition of compression?When a physical force presses inward on an object, compression force causes it to become compacted (or compressive force). During this process, the relative positions of the object's atoms and molecules change.
F = P/A is the compressive strength formula, where F is the compressive strength (MPa) P=The maximum load (or load until failure) of the material (N) A=A cross section of the load-bearing material's area (mm2).
When the force of compression exceeds an object's ability to withstand it, buckling occurs.
The relationship between force and a measurable property of the objects involved is expressed by a force law. Some interactions can be described by force laws, while others cannot.
There are forces that do not change significantly from one instant to the next and are referred to as constant in time and constant in space.
Hence, Hooke's law states that the applied force F equals the displacement or length change x multiplied by a constant k, or F = kx. The value of k is determined not only by the type of elastic material in question, but also by the temperature.
To learn more about compression refer to:
https://brainly.com/question/7602497
#SPJ9