Answer:
i think its D
Explanation:
In order to get maximum accuracy, student should take average of results from all four trials.
What is accuracy?Accuracy in terms of chemistry can be defined as to how close a measurement is to the true value.There are three types of accuracy:
1) Point accuracy-It means accuracy is present at that point of scale only.It does not give any information about the accuracy of the instrument.
2)Percentage of true value--It is the accuracy which is determined by identifying accuracy of the instrument and comparing it with the measured true value.
3)Percentage of scale range- It is the accuracy which determines accuracy of the measurement.
Accuracy in case of instruments is neglected up to ±0.5 percent.Accuracy of measurements can be increased by taking multiple measurements and taking into account human errors.
Learn more about accuracy,here:
https://brainly.com/question/15276983
#SPJ2
What equipment is generally used to make lyophilized medications suitable for administering to the patient? a) Test tubes or sterile ampules b) Petri dishes and sterile droppers c) Sterile syringes or graduated cylinders d) Measuring cups and clean, warm water
Answer:
B) Sterile droppers and petri dishes
plsss anwer my questions in the picture
Answer:
17) b
18) c
19) c
20) c
21) b
22) D
23) b
24) b
25) a
26)?
27) D
28) b
29) D
30) c
Do you think sugar would be soluble in hexane based on its structure
Answer:
The dipole forces (particularly H-bonds) that keep polar solute molecules together can be replaced by polar solute-solvent interactions, so substances that are predominantly polar (like glucose) dissolve in polar solvents like water but not in nonpolar solvents like hexane (H-bonds).
Explanation:
14. What type of materials are spun together to make yarns?
Answer:
cotton
Explanation:
which is typically spun into fine yarn for mechanical weaving or knitting into cloth.
Which statement best describes a covalent bond?
a
A chemical bond in which no electrons are shared.
b
A chemical bond that involves sharing a pair of electrons between
atoms in a molecule.
с
A chemical bond in which four or more electrons are shared.
A chemical bond in which one atom loses an electron to form a
d positive ion and the other atom gains an electron to form a negative
ion.
Answer:
B
Explanation:
Option B best describes covalent bonds.
plss anwer my question
brainliest for who answers my questions
Answer:
13.C
14.B
15.C
16.Chemical element
Chemical Element are called substance or element that cannot be decomposed or broken down into simpler substances by ordinary chemical process.
Chemical elements are those elements which cannot be chemically broken down into simpler substances and are primary constituents of all matter. They are fundamental ingredients of all matter in existence which can be combined in reaction to create chemical substance each chemical element in the universe has unique properties that distinguish it from all of the Other chemical elements. For example hydrogen is an element.
Hope that helps
1.25 is the closest to 1.04 or not I want to answer please. I think it's true, but I want to prove it scientifically, please.
Answer:
false because if you round both of them
How many grams are contained in the quantity 0.34 mol Ca
Answer:
13.6272 Grams
Explanation:
Moles of Calcium × atomic weight = Grams
0.34 × 40.08 = 13.6272
0.34 Moles of Calcium = 13.6272 Grams
2. What is the temperature (°C) of 1.50 moles of gas stored in a 10.0 L container at 1558 mm
Hg? (R=0.082 L atm/ mol K, 1.00 atm = 760 mm Hg
(4 points)
Answer:
-106°C
Explanation:
1558 mmHg / 1 × 1 atm / 760. mmHg = 2.05 atm
PV = nRT
2.05 atm (10.0 L) = 1.50 mol (0.082 atmL/molK) T
20.5 atmL = (0.123 atmL/K) T
K/0.123 atm L × 20.5 atmL = (0.123 atmL/K) T × K/0.123 atmL
166.666 K = T
167 K = T (sig figs)
K = °C + 273
167 - 273 = °C - 273
-106 = °C
What is the wavelength of a photon that will be emitted when an electron in the hydrogen atom moves from n
Answer:
Use the Rydberg Equation 1/λ = R(1/n²(final) - 1/n²(initial) where R = 109,678 cm⁻¹. Substitute initial orbital number and final orbital number and solve for wavelength (λ).
Explanation:
Example:
Assume an electron transition from n = 5 to n = 2.
1/λ = 109,678cm⁻¹(1/2² - 1/5²) = 109,678(0.25 - 0.04)cm⁻¹ = 23,032cm⁻¹
λ = 1/23,032cm⁻¹ = 4.34 x 10⁻⁵cm x 10⁻²m/cm x 10⁹nm/m = 434nm
A student performs titration to find the concentration of acetic acid. Titrant was sodium hydroxide. He went beyond the indicator color change by adding too much titrant. How will his experimental error affect the calculated value for the concentration of unknown acetic acid
Answer:
A student performed titration to find the concentration of acetic acid. Titrant was sodium hydroxide. He went beyond the indicator color change by adding too much titrant.
Explanation:
hope it helps you
I need help solving the picture
Answer:
213 kJ-1704 kJ852 kJ (ignore what's on my paper, accidentally added a negative)Explanation:
These problems are pretty easy, you just need to do to the enthalpy what is done to the equation itself. Numbers one and 3 are reversed, so they become positive values. When a coefficient changes in the equation, you multiply the enthalpy by that number. I have attached my work below. Let me know if there is any confusion left.
Hope this helped! :^)
help! giving brainliest
perdon no se es que es para que me dé ingreso
plz help someone thx
Answer:
Glycerin
Explanation:
The stronger the intermolecular forces of attraction the more energy is required to break those forces, if you need more energy to break these forces it means that these certain elements would have a higher boiling point. Which is why the answer is Glycerin, the highest boiling point of an element means that it has the strongest forces, which in this case is electrostatic forces.
Answer:
Glycerin
Explanation:
The content of ethanol or alcohol for alcoholic beverage is measured with alcohol proof. A 750 mL bottle of vodka is labeled as 60 proof. What is its alcohol content?
The alcohol content is 450 proof
In the given example, the measurement of the alcohol content is said to be measured in alcohol proof.
If the volume of the vodka = 750 mLWe are going to multiply the given proof of the alcohol with the vodka drink divided by 100 to determine the content of alcohol in the alcoholic beverage.
i.e.
= (750 × 60)/100 proof
= 450 proof
Learn more about measurement here:
https://brainly.com/question/2384956?referrer=searchResults
1 question hurry as fast as possible no link
Answer: ELEMENT
Explanation:
five differences between true solution and false solution
Answer:
k im silly frrr lol have a great day
A piece of potato had an original mass of 3.2g and after being left in a sugar solution for 24 hours it then had a mass of 2.8g. Calculate the percentage mass decrease of the potato.
Answer: -13% to 3 sig figs
Explanation:
A piece of potato had an original mass of 3.2g and after being left in a sugar solution for 24 hours it then had a mass of 2.8g. Calculate the percentage mass decrease of the potato.
the change in mass is 2.8 -3.2 = -0.4 gm
the % change fro the origial piece is ( -0.4/3.2) X 100 = -12.5%
or -13% to 3 sig figs
Temperature is a measure of ___________
A: Heat Energy
B: Potential Energy
C: Climate
D: Kinetic Energy
Answer:
D: Kinetic Energy
Explanation:
Temperature is a measure of kinetic energy. Temperature is a measure of the average kinetic energy of the particles in an object. When temperature increases, the motion of these particles also increases.
Hope this helps :)
How do the elements beryllium, carbon, and oxygen produce stars such as the Sun?
Answer:
Beryllium, carbon, and oxygen do not create stars like the sun. The sun is a massive cluster of hydrogen atoms being fused into helium atoms and heavier metals like Beryllium, carbon, and oxygen through the process of nuclear fusion. The more mass a star has in its core the more fusions that can occur and the heavier the metals inside can be fused into.
Explanation:
hope this helps. . . <3
good luck! uωu
What is the concentration of chloride ions in solution after the reaction of 5.8 mL 0.12 M ammonium chloride with 3.2 mL 0.21 M silver nitrate
Answer:
ok
Explanation:
NEED ANSWER ASAP!! will give brainlist
Which best explains why nanofiltration is an important new technology?
A. It can be used to help regions that have a short supply of usable water.
B. It can be used as an energy source to produce electricity in regions with limited coal.
C. It recycles wastewater to be reused for geothermal energy.
D. It collects solar energy to generate electrical power.
Explanation:
Our Direct Nanofiltration (dNF) membranes offer the unique combination of a low fouling hollow fiber configuration with the ability to remove organics and salinity (hardness) from water in one simple step. Other than a strainer, no further pre-treatment is required. We manufacture our membranes with a patented layer-by-layer process, where multiple nano-scale layers are deposited on a membrane support. This method enables very precise and controlled rejection and flux properties of the membrane. A unique solution for troubled water.
Think about the parts of an egg, and write down why you think it can act as a model of an animal cell. Also write down your predictions of what will happen when you leave an egg in vinegar for three days.
Answer:
Explanation:
Determine the treatments you’ll be using on your eggs, and prepare the substances you’ll need. You can make salt-water solutions by dissolving different amounts of table salt in containers of water (e.g. 100g, 200g, 300g of salt (NaCl) per liter). You can make solutions of food coloring by adding a few drops of each color into containers of
The Eggsperiment with Vinegar solution. The first experiment conducted was the egg placed in vinegar solution which allowed the egg to become soft and bouncy . Vinegar is a weak acid which is 5% acetic acid in water (meaning vinegar is largely just water). The egg has a shell that is made up of calcium carbonate an air cell forms at the large end of the egg. While the embryo is growing, the shell membranes surround and contain the white or albumen of the egg. The albumen provides the liquid medium in which the embryo develops, and it also contains a large amount of the protein necessary for proper development. I hope this was hopeful
help me. correct answer will be marked as brnlst
Answer:
You are correct it is NaCl
The metallic character of an element is defined as the properties typical of a metal, especially the tendency to lose electrons in chemical reactions.
Arrange the following elements in order of decreasing metallic character.
P, Zn, Cr, Cs, F, S, Ca
Rank from most to least metallic character. To rank items as equivalent, overlap them.
Answer:
Rb, Zn, P, S, F, Ca, Co, Cr
Rb, Zn, P, S, F, Ca, Co, Cr elements in order of decreasing metallic character.
What is a metallic character?The metallic character of an element is defined as the properties typical of metal, especially the tendency to lose electrons in chemical reactions.
Metallic character depends on the ability of an element to lose its outer valence electrons. Examples of properties related to metallic character include thermal and electrical conductivity, metallic lustre, hardness, ductility, and malleability. The most "metallic" element is francium, followed by caesium.
Hence, Rb, Zn, P, S, F, Ca, Co, and Cr elements in order of decreasing metallic character.
Learn more about the metallic character here:
https://brainly.com/question/25500824
#SPJ2
Aluminium reacts with sulfuric acid to form aluminium sulfate and hydrogen. What is the volume of
hydrogen gas in liters (L) produced at 300 K and 1.0 atm pressure, when 5.4 g of aluminium and
50.0 mL of 5.0 M sulfuric acid are combined for the reaction?
Answer:
[tex]2al + 3h2so4 = > al2(so4)3 + 3h2 \\ eqvt \\ = > \frac{5.4}{27} = > \frac{5 \times 50}{1000} \\ .2 \: mol = > .25 \: mol \\ \\ so \: .25 \: is \: limiting \: reagent \\ according \: to \: ideal \: gas \: equation \\ pv = nrt \\ v = \frac{nrt}{p} \\ v = \frac{.25 \times .082 \times 300}{1} \\ = \frac{1}{4} \times 8.2 \times 3 \\ = 2.05 \times 3 \\ = 6.15litre \\ thank \: you[/tex]
identify key concept/terminologies about solution or concentration of solution?
pls help me
thanks~
Answer :
[tex] \: [/tex]
Concentration of Solutions
Recall that a solution consists of two components: solute (the dissolved material) and solvent (the liquid in which the solute is dissolved). The amount of solute in a given amount of solution or solvent is known as the concentration. The two most common ways of expressing concentration are molarity and molality.
Molarity
The molar concentration (M) of a solution is defined as the number of moles of solute (n) per liter of solution (i.e, the volume, V solution):
M = n / V solution
The units of molarity are mol/L, often abbreviated as M.
For example, the number of moles of NaCl in 0.123L of a 1.00M solution of NaCl can be calculated as follows:
[tex]0.123 \: l \: \: of \: solution \: \times \: \frac{1.00 \: mole}{1.00 \: l \: of \: solution \: } \: \\ = 0.123 \: moles[/tex]
Molality :
The molal concentration (m) of a solution is defined as the number of moles of solute (n) per kilogram of solvent (i.e., the mass of the solvent, msolvent):
[tex]m = \frac{n}{v \: solution} [/tex]
For example, the number of moles of NaCl dissolved in 0.123kg of H2O (the solvent), in order to make a 1.00m solution of NaCl, can be calculated as follows:
[tex]0.123 \: kg \: of \: solvent \: = \frac{1.00 \: mole}{1.00 \: kg \: of \: solvent \: } \\ = 0.123 \: moles[/tex]
375cm3 of a gas has a pressure of 770 mm Hg, find it Volume if the pressure is reduced to 750 mm Hg
Answer:
385 cm^3
Explanation:
375cm3 of a gas has a pressure of 770 mm Hg, find it Volume if the pressure is reduced to 750 mm Hg
if we reduce the pressure, the volume increase since since PV is constant
so the new volume = 0.375 cm^3 X 770/750 = 385 cm^3
63
Which of the following has the greatest number of groups or branches?
A hexane
B. 3-ethylhexane
C. 2,3-dimethylpentane
D. 2-methylheptane
*correct answers only*
Answer:
C
Explanation:
Option C should be the correct one, since you have two methyl groups in the alkane (parent) chain.
A very long tube with a cross-sectional area of 1.00 cm2 is filled with mercury to a height of 76.0 cm. At what height would water stand in this tube if it were filled with a mass of water equal to that of the mercury? (The density of mercury is 13.60 g/cm3 and the density of water is 1.00 g/cm3.)
The water would stand at a height of 1033.6 cm
If the mass of the mercury, m equals the mass of the water, m' at its height,h', then the weight of the mercury W equals the weight of the water, W'
So, W = W'
mg = m'g
ρV = ρ'V' where ρ = density of mercury = 13.60 g/cm³, V = volume of mercury = Ah where A = cross-sectional area of tube = 1.00 cm and h = height of mercury = 76.0 cm, ρ' = density of water = 1.00 g/cm³, V = volume of water = Ah' where A = cross-sectional area of tube = 1.00 cm and h' = height of water.
So, ρV = ρ'V'
ρAh = ρ'Ah'
h' = ρAh/ρ'A
h' = ρh/ρ'
Substituting the values of the variables into the equation, we have
h' = ρh/ρ'
h' = 13.60 g/cm³ × 76.0 cm/1.00 g/cm³
h' = 13.60 × 76.0 cm
h' = 1033.6 cm
So, the water would stand at a height of 1033.6 cm
Learn more about water height here:
https://brainly.com/question/15415820