A 1,000 kg truck is traveling at 3 m/s. Suddenly, the driver sees a herd of cows on the road ahead and applies the brakes. The truck's tires could fail after doing 5,000 J of work to slow the vehicle. Can the truck stop before the tires fail?
A. Yes, the total KE the tires need to transfer out of the system is less than 5,000 J.
B. Yes, the tires do not do any work, it is only the brakes that do work.
C. No, the truck had to stop suddenly and the quick change in KE will cause the tires to fail.
D. No, the total KE the tires need to transfer out of the system is more than 5,000 J.
Answers
This question involves the concepts of the law of conservation of energy and kinetic energy.
The correct option is "A. Yes, the total KE the tires need to transfer out of the system is less than 5,000 J".
According to the law of conservation of energy:
Loss in Kinetic Energy = Work done by the tires
[tex]\frac{1}{2}mv^2=W[/tex]
where,
W = work done by tires = ?
m = mass of the truck = 1000 kg
v = speed of the truck = 3 m/s
Therefore,
[tex]W=\frac{1}{2}(1000\ kg)(3\ m/s)^2[/tex]
W = 4500 J
Since the failure limit of work done by the tire is 5000 J, which is greater than the actual work done by the tire in this scenario. Hence, the tire will not fail in this case.
Learn more about the law of conservation of energy here:
brainly.com/question/20971995?referrer=searchResults
The attached picture explains the law of conservation of energy.
Related Questions
under what condition could the weight of an object equal zero
Answers
What do you notice about the lines of earthquakes and volcanoes and where they seem to occur on Earth's surface?
Answers
Answer:
Most earthquakes and volcanoes occur because of the movement of the plates, especially as plates interact at their edges or boundaries.
Explanation:
what do you mean by frequency of sound is 50Hz
Answers
Answer:
This means the source of sound vibrates 50 times in one second. Therefore, number of vibrations in 1 minute, i.e. in 60 seconds = 50 x 60 = 3000 times.
Explanation:
for rogue waves to form so often, they must follow a non linear system, instead of the linear constructive interference system scientists once thought it was to explain these waves. What does it mean to be a non linear equation?
Answers
Rogue waves are unpredictable and sudden waves that appear as surface waves and that have the ability to make ships capsize. For a wave to be a non-linear equation it means that it is unpredictable. What is expected does not actually happen. The resulting wave is often chaotic in nature.
In mathematics, a non-linear equation is one in which the input does not equal the output. This makes it more difficult to predict the outcome of variables. Also, a linear constructive interference system is one in which the meeting of two waves causes an amplification in which the resulting wave is equal to the sum of the individual waves. So, when rogue waves are said to be non-linear, it means that the resulting wave is not equal to the individual waves that formed it. They are chaotic and unpredictable.Learn more here:
https://brainly.com/question/12480390
In the year 2081 in a shipping port on the moon, workers for Ore-Space, Inc., hoist a 500.0 kg hunk of anorthosite moon rock by a chain. (Neglect the weight of the chain.) The block is initially accelerating at 4.0 m/s.
How much force is being exerted by the chain?
Answers
Answer:
2,800 n
Explanation:
hope this helps, have a nice day/night! :D
The force of 2812.5 N is being exerted by the chain.
What is force?An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude. The application of force is the location at which force is applied, and the direction in which the force is applied is known as the direction of the force.
Given that:
Mass of the hunk of anorthosite moon rock : m = 500.0 kg.
Acceleration of the hunk: a = 4.0 m/s².
Acceleration due to gravity in moon = 1.625 m/s².
So, required force = 500.0(4.0 +1.625) n = 2812.5 N.
The force of 2812.5 N is being exerted by the chain.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
How long does it take a plane, traveling at a constant speed of 200 m/s, to fly once around a circle whose radius is 2750 m
Answers
Answer:
2000 and 156300
jade it jawaban nya
can someone pls help me in this q
Answers
Answer: B
Explanation:
A block of wood mass 0.60 kg is balanced on top of a vertical port 2.0 m high. A 10 gm
bullet is fired horizontally into the block and the embedded bullet land at a 4.0 m from
the base of the port. Find the initial velocity of the bullet.
A. 10 3 m/s B. 8.32 m/s C. 3.82 m/s D. 1.0 m/s
Answers
Answer:
m V1 = (m + M) V2 conservation of momentum
T = time to fall 2 m
2 = 9.8 / 2 T^2 initial vertical velocity zero
T^2 = 4/9.8 T = .639 sec
Sx = V2 * .639 sec distance traveled horizontally
V2 = 4 /.639 = 6.26 m/sec
V1 = (m + M) / m * 6.26 m/sec from first equation
V1 = (600 + 10) / 10 * 6.26 m/s = 382 m/s
There seems to be some confusion on units
Note that 382 m/s is a reasonable answer for speed of bullet
1100 ft/sec is reasonable for a .22 cal bullet
1100 ft/sec / 3.28 ft/m = 335 m/sec
Krishna wants to measure the mass and volume of a key. Which tools should she use?
a balance and a beaker of water
a balance and a meter stick
a beaker of water and a ruler
a ruler and a meter stick
Answers
Answer:
a balance and a beaker of water
Explanation:
The mass can easily be measured with balance. If you drop the key in a beaker of water, the water inside the beaker will increase and this increases the volume of water that will be equal to volume of key.
1kg red-hot iron is put into 1 L of cool water. Explain in detail what will happen to the temperatures of both objects.
Answers
The equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.
According to the principle of conservation of energy, the heat lost by the red-hot iron is equal to heat absorbed by the cold water.
[tex]Q_{I} = Q_{w}\\\\m_IC_I(t_I - T) = m_wC_w (T-t_w)[/tex]
where;
T is the equilibrium temperatureFrom the equation given above, we can conclude that the equilibrium temperature of the iron-water mixture will be greater than the initial temperature of the cold water but less than the initial temperature of the hot iron.
Learn more here:https://brainly.com/question/14205142
ASAP will mark brainlyist
A truck is speeding up (with a constant acceleration) from rest to 45 m/s and it takes it 15 seconds to do so. How far will the car travel?
Answers
Answer:
[tex]315meters[/tex]
Explanation:
Solution is attached.
At the exact same instant that a
ball is thrown horizontally (in a
projectile) another identical ball
is dropped straight down from
the same height. Which ball hits
the ground first?
Answers
Answer:
The ball being thrown straight down.
Explanation:
The downforce and gravitational pull of the ball going down will give it
a higher velocity compared to the one trown horizontially it will take some time for it to catch downforce speed and reach the same velocity.
Two cars a and b are moving along a straight road in the same direction with velocities of 25km/h and 40km/h . Find the velocity of car b relative to car a
Answers
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
A piece of wood has a mass of 8g and a volume of 10cm³. Work out the density of the wood in /3 .
no links please just explain how you got the answer.
Answers
Answer:
8×10^-3÷10×10^-6=8×10^2=800 kg/m^3
Answer:
2.4/3
Explanation:
first we make 8g/10cm then 0.8 so the only number that can fit for /3 is 2.4
hope helped!
How can you find the mass of an object that is broken into parts?
Find the weight of the parts, and then add those weights together.
Find the weight of the whole.
Find the mass of the whole.
Find the mass of the parts, and then add those masses together.
Answers
The mass of an object broken into parts can be determined by finding the mass of the parts, and then add those masses together.
To total mass of an object broken into parts can be determined by adding the mass of different parts together.
[tex]M_t = m_1 + m_2 +\ ---[/tex]
where;
[tex]M_t[/tex] is the total mass of the objects[tex]m_1 , \ m_2[/tex] masses of the broken partsThus, we can conclude that the mass of an object broken into parts can be determined by finding the mass of the parts, and then add those masses together.
Learn more here:https://brainly.com/question/13668778
A particle has 37.5 joules of kinetic energy and 12.5 joules of gravitational potential
energy at one point during its fall from a tree to the ground. An instant before striking
the ground, how much mechanical energy.
Answers
Hi there!
[tex]\large\boxed{ME = 50 J}}[/tex]
Mechanical Energy = Potential Energy + Kinetic Energy, or:
E = U + K
Plug in the given potential and kinetic energies:
E = 12.5 + 37.5 = 50 J
some properties of the particles that are sources of electric charge include
Answers
if an astronaut has a mass of 80kg on earth, what is their mass on the moon?
Answers
Answer:
130 N basically
Explanation:
Glucose typically enters the cell through which mechanisms
Answers
Answer:
facilitated diffusion
If I travel 100 kilometer in one hour then I have a speed of?
Answers
Answer:
100 km /hour
Explanation:
/ or per = every once so every hour you are traveling 100 kilometera
Answer:
100kmh-1
Explanation:
100km÷1hour
100kmh-1
On some strange planet you find that a 17.4 kg object falls downward 28.8 meters in 5.5 seconds. What is the magnitude of the acceleration due to gravity on this planet
Answers
Hi there!
[tex]\large\boxed{g = 1.904 m/s^2}[/tex]
Acceleration of gravity is unaffected by an object's mass.
In the absence of air resistance, we can use the following kinematic equation:
d = vit + 1/2at²
The object falls from rest, so:
d = 1/2at²
The acceleration in this instance is gravity, our unknown. We can rearrange the equation to solve for 'g':
2d/t² = g
2(28.8)/(5.5²) = 1.904 m/s²
100N force is applied to a ball with a mass of 0.25kg. Calculate the ball acceleration.
Answers
Please find attached photograph for your answer.
Hope it helps.
Do comment if you have any query.
A teacher has two radioactive sources, A and B.
Source A has a longer half-life than source B.
What can be deduced about the nuclei in source A compared with the nuclei
in source B?
Do not refer to isotopes in your answer.
Answers
Answer:
The nuclei of source have greater stability than those of source B.
A circular coil consisting of 500 turns with an area of 6.0x10-4 m 2 is rotating in a uniform magnetic field. At the start, the normal to the coil is perpendicular to the magnetic field. After 15s, the normal to the coil is 60⸰ with the magnetic field. The average induced emf is -0.058V. What is the magnitude of the magnetic field?
Answers
The magnitude of the magnetic field in the coil is 21.65 T.
The given parameters;
number of turns, N = 500 turnsarea of the coil, A = [tex]6\times 10^{-4} \ m^2[/tex]change in time, t = 15 sThe induced emf in the coil is determined by applying Faradays law;
[tex]emf =N \frac{d\phi }{dt} \\\\emf = N ( \frac{\phi _2 - \phi_1}{t} )\\\\emf= N(\frac{BAsin\ 60 - BAsin\ 90}{t} )\\\\emf = NBA(\frac{sin60 - sn90}{t} )\\\\-0.058 = 500(6\times 10^{-4})\times B\times (\frac{0.866 - 1}{15} )\\\\-0.058 = -0.00268B\\\\B = \frac{0.058}{0.00268} \\\\B = 21.65 \ T[/tex]
Thus, the magnitude of the magnetic field in the coil is 21.65 T.
Learn more here:https://brainly.com/question/13369951
A student jumps off a sled toward the west after it stops at the bottom of an icy hill.
Based on the law of action-reaction, in what direction will the sled most likely move as the student jumps off?
Answers
Answer:
Explanation:
That’s dangerous who would do that.
Me
1 Which requires more work, lifting a 10kg sack of
coal or lifting a 15kg bag of feathers?
Answers
A car traveling due north at 60 km/hr increased its velocity to 80 m/s due south in 20 seconds. Draw i) speed against time graph, ii) acceleration against time graph.
Answers
The slope of the graph is acceleration of the car with a value of 3.2 m/s².
The given parameters;
initial velocity of the car, u = 60 km/hrfinal velocity of the car, v = 80 m/stime of motion of the car, t = 20 sThe initial velocity of the car in m/s is calculated as follows;
[tex]60 \ \frac{km}{hr} \times \frac{1 \ hr}{3600 \ s} \times \frac{1000 \ m}{1 \ km} = 16.67 \ m/s[/tex]
The acceleration of the car is calculated as follows;
[tex]a = \frac{v- u}{t} \\\\a = \frac{80 - 16.67 }{20} \\\\a = 3.2 \ m/s^2[/tex]
The graph of the velocity against time and acceleration against time is in the image uploaded.
Learn more here:https://brainly.com/question/12113478
The part of the shore that represents the water's edge and migrates back and forth with the tide is known as the ________.
Answers
Answer :It is know as the shore line
Explanation:
Cho mạch điện gồm ba điện trở mắc nối tiếp nhau. Biết R 1 = 8Ω, R 2 = 12Ω, R 3 = 4Ω. Hiệu điện thế giữa hai đầu đoạn mạch U = 48V. Tính hiệu điện thế giữa hai đầu mỗi điện trở.
Answers
56gq2391$/= 343568
hope u understand me
a person sits on a freely spinning lab stool that has no friction in its axle. when this person extends her arms,
Answers
Hi there!
[tex]\boxed{\text{Her angular velocity decreases.}}[/tex]
Recall the conservation of angular momentum:
[tex]L_i = L_f\\\\I_iw_i = I_fw_f[/tex]
When this person extends her arms, her moment of inertia increases.
According to the conservation of angular momentum, if the moment of inertia increases, the angular velocity must DECREASE.