A 24 kg crate is moving at a constant speed because it is being pushed with a force of 53n. What would be the coefficient of kinetic friction between the crate and the floor?

Answers

Answer 1

Answer:

The coefficient of kinetic friction between the crate and the floor can be calculated using the formula μ = Ff / N, where Ff is the frictional force, N is the normal force, and μ is the coefficient of kinetic friction.

In this case, the normal force is equal to the weight of the crate, which is 24 kg * 9.8 m/s2 = 235.2 N. The frictional force can be calculated using the formula Ff = μ * N, where μ is the coefficient of kinetic friction and N is the normal force.

If we substitute the values for N and Ff into the formula for the coefficient of kinetic friction, we get:μ = 53 N / 235.2 N = 0.225

Therefore, the coefficient of kinetic friction between the crate and the floor is 0.225.


Related Questions

A car traveling at 70 m/s comes to a complete stop in a time of 50 sec. What is the car's acceleration?

Answers

-1.4m/s² is the negative acceleration when the car completely stops in a time of 50sec.

v=u+at in this v= final velocity u=  initial velocity , a = acceleration of the car and t= time

initial velocity of car u= 70m/s

final velocity of the car is v= 0 m/s after stop the car is in rest position

time t =50s, now substitute these values in equation

0=70+a(50)  which is -1.4 m/s².

here we got the answer in negative acceleration. Which is called as Deceleration.

Hence-1.4m/s² is the negative acceleration when the car completely stops in a time of 50sec

To study more about Acceleration:https://brainly.com/question/605631

I’m so confused about this question. Could anyone pleease explain to me how to solve these kinds of questions?

Answers

Answer: 3.3m/s

Explanation:

kinetic energy=0.5*m*v^2

5.0m/s(^-1)=0.2

0.2^2=0.04

0.5*5000kg*0.04m/s=100J

0.5*2500kg*v^2=100J

Rearrange the equation:

100/0.5*2500=v^2

0.08=v^2

√0.08=v^2

0.28=v

Combined velocity= 1st lorry+2nd lorry=3.3m/s

You need to get to the post office, 200 meters away, and you can walk at about 2.5 m/s. How much time will it take to get to the post office?

Answers

200 divided by 2.5 equal 80 probably

A roller-coaster goes over a 12 m tall hill then approaches a 30 m hill. What is the minimum velocity the roller-coaster would need when going over the 12 m hill to make it to the top of the 30 m hill?

254.8 m/s

15.96 m/s

Not enough information to answer

18.78 m/s

Answers

The minimum velocity the roller-coaster need when going over the 12 m  to make it to the top of the 30 m hill is equal to 18.78 m/s. Therefore, option (D) is correct.

What is the law of conservation of energy?

Energy can be transformed from one to another but can neither be created nor destroyed. Energy is present in nature in several forms such as heat, nuclear energy, electricity, chemical energy, and so on.

If every form of energy is considered, then the total energy of an isolated system remains constant. This law of energy applies to all types of energy in our universe.

From the law of conservation of energy, the energy of the roller-coaster goes:

[tex]{\displaystyle \frac{1}{2} mv^2 +mgh_1 = mgh_2[/tex]

Given the height of the first hill, h₁ = 12m

The height of the second hill, h₂ = 30 m

The gravitational acceleration, g = 9.8 m/s²

We can find the value of the minimum velocity of the roller-coaster from the above equation:

[tex]{\displaystyle \frac{1}{2} v^2 +gh_1 = gh_2[/tex]

0.5 × v²  + (9.8) × 12 = (9.8) × 30

0.5 v² = 176.6

v = 18.78 m/s

Learn more about the law of conservation of energy, here:

brainly.com/question/12050604

#SPJ1

newton's second law in 1 dimension: a net force of 125 n is applied to a certain object. as a result, the object accelerates with an acceleration of 24.0 m/s2. the mass of the object is

Answers

The mass of the object  when  a net force of 125 n is applied to a certain object is  5.2 kg

Newton's second law in one dimension states that the net force acting on an object is equal to the product of the object's mass and its acceleration. In mathematical form, the law is expressed as:

F = ma

Where F is the net force, m is the mass of the object, and a is the acceleration of the object.

In this case, we are given that a net force of 125 n is applied to an object and that the object accelerates with an acceleration of 24.0 m/s2. We are asked to find the mass of the object.

We can solve for the mass using the equation above:

m = F / a

= 125 n / 24.0 m/s2

= approximately 5.2 kg

Therefore, the mass of the object is approximately 5.2 kg.

To know more about  mass visit : brainly.com/question/6782334

#SPJ4

what initial speed must an alpha particle have to just touch the surface of a gold nucleus before being turned back? assume the nucleus stays at rest.

Answers

Since the closest approach distance is 39.5 fermi, the initial speed is in a head-on collisions between an alpha particle and a gold nucleus (Z=79).

What is alpha?

The Greek alphabet begins with the letter alpha. Its value is one in the Greek number system. The word "ox" in the West Semitic language, aleph, is derived from the Phoenician letter alpha. The Latin letter A and the Cyrillic letter A are examples of letters that evolved from alpha.

In physics, alpha is a variable that is used for numbers that could be different from one another. Some examples of quantities using are: An isotope of helium, the alpha particle is made up of two protons and two neutrons. kg is the unit of mass. A metre is a unit of length, and a second is a unit of time.

Why do we use alpha and beta and how it is calculated?

The two components of a formula used to describe the results of stocks & investment funds are alpha and beta. Beta is a metric for comparing volatility to a benchmark, like the S&P 500. After controlling for erratic variations and market-related volatility, alpha seems to be the return rate on an investment.

Rf - beta - Rf = alpha (Rm-Rf)

R is a symbol for portfolio return. The risk-free return rate is denoted by Rf. The systematic risk of the a portfolio is represented by beta. According to a benchmark, Rm stands for the market return.

To know more about Alpha visit:

https://brainly.com/question/12074957

#SPJ4

A 0. 25-kilogram baseball is thrown upward with a speed of 30. Meters per second. Neglecting friction, the maximum height reached by the baseball is approximately.

Answers

Answer:46m

Explanation:

a) Calculate the percent efficiency for an electric motor that uses 15 000 J of energy to produce 11 500 J of energy. How much waste is produced?

Answers

Answer:

76.67% efficient

Explanation:

11500/15000*100

Car has mass if 500 kg is moving at 24 m/s.A lion has mass of 100 kg drops to the roof of the car from over hanging branch. Show the car will slow down to 20 m/s

Answers

The velocity of the car will slow down to 20 m/s given that the lion of mass 100 Kg drops to the roof of the car.

How do I prove that the velocity of the car will slow down to 20 m/s?

To show that the velocity of the car will slow down to 20 m/s, we shall determine the common velocity of the car and the lion after collision. This shown below:

Mass of car (m₁) = 500 KgVelocity of car (u₁) = 24 m/sMass of lion (m₂) = 100 KgVelocity of lion (u₂) = 0 m/sCommon velocity (v) = ?

m₁u₁ + m₂u₂ = v(m₁ + m₂)

(500 × 24) + (100 × 0) = v × (500 + 100)

12000 + 0 = v × 600

12000 = v × 600

Divide both sides by 600

v = 12000 / 600

v = 20 m/s

From the calculation made above, we can see that the common velocity of the car and the lion is 20 m/s.

Thus, we can say that the velocity of the car slows down to 20 m/s

Learn more about velocity:

https://brainly.com/question/15190978

https://brainly.com/question/28151651

#SPJ1

A wave is moving toward shore with a velocity of 6 m/s. If its frequency is 3 hertz, what is its wavelength? O 2 meters O2 meters/sec O 18 meters O 18 meters/sec​

Answers

The wavelength is 3.975 × 10^-19 J.

What is wavelength?

Wavelength can be difined as the distance between two successive crests or throughs of a wave.

To find out the energy in joules given the wavelength of a photon we have to  Use the  Planck's equation E = h x c / λ and substitute the values of   the wavelength (λ), Planck's constant in joules (h = 6.6261 × 10⁻³⁴ J⋅s), and speed of light (c = 299792458 m/s). With these units, you'll get an energy result in joules (J).

Energy of photons,

E = hc/λ

(6.626 × 10-34Js) × (3 × 108ms-¹)/

5 x 10-7

= 3.975 × 10^-19 J

To know more about wavelentgh click-

https://brainly.com/question/10750459

#SPJ1

stars with more than 15 times the mass of our sun usually evolve from the main sequence to red giants

Answers

Stars with a mass greater than 15 times that of the sun typically transition directly from the hr diagram to the red giant stage while maintaining a nearly constant luminosity.

Constant means what?

A quantity that is supposed not to shift value in a particular mathematical debate is one that has a specific amount in a specific context, is true globally, or is a feature of some material or instrument.

What symbol represents a constant?

A digit (0–9) or a period serves as the initial of a constant sign. A constant symbol's value cannot be altered. It is merely the string made up of the symbol's characters, all lowercase alphabetic characters having been converted to uppercase.

To know more about constant visit:

https://brainly.com/question/1597456

#SPJ4

How much work is done by 15 kW engine during 3.0 min?

Answers

W = 3.15 · 10⁶ J work is done by 15 kW engine during 3.0 min.

We are aware that power is determined using the equation P = W/t, where P equals power (W), W equals work (J), and t equals time (s)

Using this formula, we can create a formula for work by adding t to both sides of the equation.

W = Pt

Converting 15 kW to W yields 15,000 W.

3.0 minutes is 180 seconds, therefore let's convert that.

Solve for W by substituting these numbers into the work formula.

W = Pt

W = (15,000 W) · (180 s) (180 s)

W = 2700000 J

W = 2.7 · 10⁶ J

This is the amount of work a 15 kW engine can accomplish in three minutes.

To know more about work visit:-

https://brainly.com/question/18094932

#SPJ1

Which statements are explained by Newton’s law of universal gravitation?
//Heavier objects fall faster than lighter objects.
//The strength of Earth’s gravity decreases as an object gets farther from Earth.
//The strength of gravity depends on an object’s mass.
//Mass and weight are the same quantities.

Answers

Answer:

Below

Explanation:

The strength of Earth’s gravity decreases as an object gets farther from Earth.   <===== this is the only statement that is true

Answer:  (There are two statements)

The strength of Earth's gravity decreases as an object gets farther from Earth.

The strength of gravity depends on an object's mass

Explanation:

a ladybug sits 15.2 cm from the center of a beatles music album spinning at 45.00 rpm. what is the maximum velocity (in m/s) of its shadow on the wall behind the turntable, if illuminated parallel to the record by the parallel rays of the setting sun? (enter the magnitude.)

Answers

The maximum velocity of its shadow is 0.711 m/s .

Here let the maximum linear velocity be denoted by Vmax;

let the angular velocity be

ω , and r be the circular track radius

Now , Vmax = rω

Given Beatles music album spinning at 45.00 rpm

= 45.00 ×(2π / 60) = 4.68 rad/s

So Vmax = ( 0.152) × ( 4.68)

= 0.711 m/s .

Velocity can be notion of as the rate at which an object covers distance. A quick-moving object has a high speed and covers a notably big distance in a given amount of time, whilst a sluggish-shifting item covers a relatively small amount of distance in the same amount of time.

Learn more about velocity here :- https://brainly.com/question/20432894

#SPJ4

3
1 point
An archer fires an arrow at 86m/s and an angle of 34° above the ground. What is the horizontal velocity?
71.30 m/s
48.09 m/s
86 m/s
65.82 m/s

Answers

Answer:

Below

Explanation:

VERTICAL velocity will be   v  sin 34

HORIZONTAL velocity will be   v cos 34  = 86 cos 34 = 71.3 m/s

½ pounds of butter to make one batch of cookies how many Kilograms of
butter is needed to make 12 batches of cookies? Dimensional analysis

Answers

One batch of cookies need 1/2 pounds or 0.21 Kg. Thus, 12 batches of cookies need 2.61 kg of butter.

What is one pound of mass?

Mass of a substance is the measure of its total amount. Mass of a substance can be expressed in g, Kg, pounds, lbs etc. Each units can be interchanged with certain relations.

One pound of mass = 0.435 Kg.

Thus, 1/2 pound = 0.435/2 = 0.21 kg.

Given that one batch of cookies need 1/2 pounds or 0.21 Kg. Hence, the amount of butter need to prepare 12 batch of cookies is :

= 12 × 0.21 Kg = 2.61 kg.

Therefore, the mass of butter required for 12 batches of cookies is 2.61 Kg.

To find more on mass, refer here:

https://brainly.com/question/19694949

#SPJ1

A small car and a semi-truck have the same total mechanical energy. Which if the following cannot be true?

Answers

The answer that makes most sense is D. Hope this helps

The car is going the same speed as the truck and the truck and car are at the same height can not be true. Therefore, option (B) is correct.

What is mechanical energy?

Mechanical energy can be defined as the sum of potential energy and kinetic energy that is used to do work. Mechanical energy defines the energy of a body because of its position or motion.

The total mechanical energy can be considered conserved when the forces doing work are conservative in nature. The energy changes between different kinds of potential energy and kinetic energy but the total energy of the system remain constant.

Kinetic energy and the potential energy of the car and the semi-truck will depend on the masses of the objects. The semi-truck must have a greater mass than the car. Therefore, the car and the semi-truck must have different values of speed and height if they have the same total mechanical energy.

Learn more about mechanical energy, here:

brainly.com/question/13552918

#SPJ2

What part of the stopping distance does reaction time effect?

Answers

Reaction time is the time it takes for a driver to recognize a hazardous situation and initiate a response, such as braking or steering. It is one component of the total stopping distance of a vehicle. The other components of stopping distance include the distance traveled during the period of reaction time (the distance the vehicle travels before the driver begins braking) and the braking distance (the distance the vehicle travels while the brakes are applied).

The stopping distance of a vehicle can be calculated using the following formula:

Stopping distance = reaction time + distance traveled during reaction time + braking distance

In this formula, the reaction time is the time it takes for the driver to recognize the hazardous situation and initiate a response, the distance traveled during reaction time is the distance the vehicle travels during this time period, and the braking distance is the distance the vehicle travels while the brakes are applied.

It is important for drivers to be aware of their reaction time and how it can affect their stopping distance. Factors that can affect reaction time include a driver's level of alertness, the complexity of the driving situation, and the driver's age, among others. By understanding their reaction time and the factors that can affect it, drivers can better anticipate and respond to hazardous situations on the road, helping to reduce the risk of accidents and injuries.

An observer moves to the left with some velocity, v, at the same time a sound wave source moves to the left with twice the velocity of the observer. How will the frequency of the source be shifted as it passes the observer?
The observed frequency will be greater than the source’s frequency.
The observed frequency will be less than the source’s frequency.
The observed frequency will be the same as the source’s frequency.
The source never passes the observer.

Answers

The observed frequency will be greater than the source’s frequency (option - A) is correct answer.

What happens if both the observer and the sound source move?

If the source and observer are moving simultaneously in either case—moving observer or moving source—you'll notice that the frequency increases. The frequency decreases if they are drifting apart. Whether the source is moving or the observer is moving will affect how much the frequency changes.

Although the waves move at the same speed, the frequency that is observed is affected by any relative movement between the source and the observer. The wavelength changes along with the observed frequency. When an observer and a source are moving in the same direction, the frequency rises and the wavelength falls.

To know more about frequency visit:

https://brainly.com/question/15489705

#SPJ1

X and Y starts from point A. X starts running through AB and reach point B. Y also starts running through path ABC and reach B at the same time as A. The situation is depicted in the below figure . Which of the following is/are true for the given situation.
(a) B covers longer distance but with a lower speed.
(b) A covers shorter distance with a higher speed
(c) A covers shorter distance with a lower speed.
(d) B covers longer distance with a higher speed.​

Answers

The following statement(s) is/are true for the current situation: B travels farther but at a slower speed.

What are the 4 different kinds of running?

Base Run You are probably already performing a base run when you go for a run. Tempo Running. Speed running, often known as sprinting, is when you run continuously at a fast speed for a brief period of time. Run in intervals

What results do 30 minutes of running have?

Limiting your run to 30 minutes lowers the possibility of damage by reducing the chance of muscular weariness or overstretching. Additionally, recovery time is much shorter than it is for longer distance runs, allowing you to exercise more regularly and consistently.

To know more about running visit :-

https://brainly.com/question/17438349

#SPJ1

a jet is flying in a direction 30o north of east with a speed of 430 mph. what are the north and east components of its velocity?

Answers

Both of the Northward and also the Eastward components of a velocity will be equal.

What is the straightforward meaning of velocity?

The displacement that such an object as well as particle experiences with regards to time is expressed vectorially as velocity. The metre per second (m/s) is the accepted unit of flow speed (also known as speed).

What are the SI unit and velocity formula?

The entire displacement of objects divided by the overall time elapsed gives the object's average velocity. It is supplied by. Average velocity is calculated as total displacement divided by time. M s-1, or m/s, is the SI unit for average velocity. M L T-1 provides the volumetric formula for the same.

Briefing:

That jet is traveling at 430 mph at the an angle of 30 degrees to a north, therefore,

xj = (430 mph) sin 30 = 215 mph

yj = (430 mph) cos 30 = 372 mph

To know more about velocity visit:

https://brainly.com/question/18084516

#SPJ4

Which condition would exist for the length of day and night to be equal all year long

Answers

Answer:

the Equionox

Explanation:

there are only teo times of the year when the earths axis

is tilted neither toward nor away from the sun, resulting on a nearly equal amount of daylight and darkness at all latitudes. these events are referred to as equionoxes

Use Q=mCΔt : PCl3 is a compound used to manufacture pesticides. A reaction requires that 96.7 g of PCl3 be raised from 31.7 oC to 69.2 oC. How much energy will this require given that the specific heat of PCl3 is 0.874 J/g oC? Please explain fully . Im trying to understand this

Answers

The quantity of heat required is 1229.1 J

What is specific heat capacity?

The specific heat capacity of a substance is the quantity of heat required to increase the temperature of a unit mass of the substance by 1°C or 1k. it measure in J/kg/k.

The specific heat capacity of a substance is denoted by 'C'. And it is expressed as C = Q/m∆t

where ∆t is the change in temperature, Q is the quantity of heat energy required and m is the mass of the substance.

therefore Q=mCΔt

Q= 96.7× 0.874×(69.2-31.7)

Q= 1229.1J

Thereore the heat required to increase the temperature from 31.7°C to 69.2°C is 1229.1J

learn more about specific heat capacity from

https://brainly.com/question/28825214

#SPJ1

A light-weight potter's wheel, having a moment of inertia of is spinning freely at 40. 0 rpm. The potter drops a small but dense lump of clay onto the wheel, where it sticks a distance 1. 2 m from the rotational axis. If the subsequent angular speed of the wheel and clay is 32 rpm, what is the mass of the clay?.

Answers

The mass of the clay that spinning freely with a speed of 40.0 rpm sticks to a distance of 1.2 m from the axis of rotation and the subsequent angular velocity of the wheel and the clay 32 rpm is 4.2 kg.

Law of conservation of angular momentum

The law of conservation of angular momentum is an analogy of the law of conservation of linear momentum. If we look back at Newton's II law for translational motion, a similar relationship will apply to the law of the conservation of momentum.

The law of conservation of angular momentum is a law that states the amount of momentum before and after producing the same or constant collision.

The equation is:

I₁ω₁ = I₂ω₂

We have,

Initial angular speed of the system = 40.0 rpm ⇒ ω₁

Final angular speed of the system = 32 rpm ⇒ ω₂

This question is incomplete, it should be the moment of inertia of potter's wheel = 24 kgm²  ⇒ I₁ = I₂

Distance of clay from axis of rotation = 1.20 m ⇒ R

So, to determine the mass of the clay we can use conservation of angular momentum:

I₁ω₁ = I₂ω₂

(24) (40) = (24 + m (1.20)²) (32)

m = 4.2 kg

Learn more about conservation of momentum here: https://brainly.com/question/29765459

#SPJ4

a mosquito flying over a highway strikes the windshield of a moving trunk. compared to the magnitude of the force of the truck on the mosquito during the collision, the magnitude of the force of the mosquito on the truck is

Answers

The magnitude of the force of the mosquito on the truck is same as the magnitude of the truck on the mosquito.

When we push or pull an object, then we say that a force is applied to it. Depending on its direction, the force might be either positive or negative.

The Newton's third law of motion states that if a force is applied to an object by an external agent, then the object applies the same magnitude of the force on the agent but that this force is in the opposite direction to the original force direction. So, forces always occur in a pair.

Even though the two forces in a pair act in different ways on distinct objects, they are equal.

In the given question, when the mosquito hits the shield of the truck then it applies a force on the car, and the car also applies the same magnitude of the force on the mosquito.

Thus, the force on the mosquito by the truck has the same magnitude as the force on the truck by the mosquito.

To know more about force:

https://brainly.com/question/10901125

#SPJ4

how are the waves generated in the spectrum​

Answers

By radioactive atoms and in nuclear explosions.

One “day” on the moon is the same length as one month on
Earth.
Is this True or false??

Answers

Answer:

True

Explanation:

1 The graph shows how the speed of the car varies with time.
speed
10
20
Sime/s
Which statement about the acceleration of the car between 10s and 20s is correct?
A The acceleration decreases.
B
The acceleration increases.
C
The acceleration is constant, but not zero.
D The acceleration is zero.

Answers

The speedup gets faster. while the car is properly accelerating between 10 and 20 seconds.

The ideal answer is B.

What is the process by which a particle is accelerated from 10 ms to 20 ms?

A body's kinetic energy is equal to 50 times its mass when it is moving at 10 m/s, and 200 times its mass when it is travelling at 20 m/s. In other words, it takes three times as much work to accelerate a body from 0 to 10 m/s (200-50=150*mass).

What does "the acceleration due to gravity is 10 m s2" mean?

The earth pulls anything toward its core, which causes the object being pulled to accelerate by 9.8 meters per second as it "falls" to earth.

To know more about acceleration visit:-

https://brainly.com/question/12550364

#SPJ1

for a spacecraft operations for a several year long mission to the outer solar system, i should use:

Answers

Long-duration spacecraft use the potent rocket fuel LOX + LH as a propellant. The spacecraft's long-term survival in the outer solar system is ensured by the use of this propellant.

To be utilized on commercial space launch vehicles is the propellant Lox/LH2. For massive space rockets, liquid oxygen was the first, least expensive, safest, and ultimately favoured oxidizer. Its fundamental flaw is that it is only mildly cryogenic, making it unsuitable for military applications where speedy launch and storage of the missile's fuel are essential. All the top rocket thinkers agreed that liquid hydrogen was the theoretically ideal rocket fuel.

LH2 and LOX are fed into each engine's combustion chamber after being placed in the tanks and when the launch countdown approaches zero. When the propellant is lit, the hydrogen and oxygen react violently to create: water

O2 + 2H2 = 2H2O + Energy

Superheated water and enormous quantities of energy are released in this "green" process (steam). The water vapour expands and leaves the engine nozzles at speeds of 10,000 mph due to the hydrogen-oxygen reaction's intense heat.

To know more about solar system visit this:

https://brainly.com/question/12075871

#SPJ4

Why do organisms make different proteins? The Darwin’s bark spider on the left makes proteins that result in spider silk with high flexibility. The Darwin’s bark spider on the right makes proteins that result in spider silk with low flexibility. Using the space below, explain why you think this happens.

Answers

Organisms make different proteins because of the gene recombination and genetics.

What is the genetics of spider silk?

Siblings may inherit various features from their parents and from each other depending on the specific gene combinations that each seeds carries. The variance in silk inflexibility among spider seed is explained by random gene recombination.

The inflexibility of silk is another issue. This point is shared by all of Darwin's dinghy spiders (they all have spider silk with some flexibility), yet some spiders create silk that is more flexible than other spiders' silk. There are three levels of silk inflexibility: high, medium, and low.

The above explanation about the genetic recombination tells about why the organisms make different proteins.

Learn more about Silk of spider,

brainly.com/question/1120072

#SPJ1

Other Questions
Which data types go through floating data types? (a) int (c) long (b) byte (d) double name four of Hitlers actions that showed he was an absolute ruler, or dictator give a brief summary about the pic. PLEASE a female client considers using spermicidal agents because she wants both birth control and protection from sexually transmitted infections (stis). what information should the nurse provide the client about spermicidal agents? how does reading to dogs help kids outside of school mooney is obsessed with developing a figure like the idealized bodies he sees in advertising, magazines, and other media. as a result, he eats very little. he wants to reduce his body weight to a level well below the ideal weight of a man of his age, height, and body proportions. mooney's behavior is characteristic of How much simple interest is made on an investment of $800 for 7 years at 6% A special machine is used at a construction site to dig holes. A hole is dug to a depth of 4.75 feet when the machine hits rock. The progress slows to 3/5 feet per hour of digging. The depth of the hole must be at least 12 1/2 feet by the end of the day to stay on schedule. What is the minimum amount of time the machine must continue at its present rate to complete the hole on schedule? Select from the drop-down menus to correctly complete the statement. The machine requires at least Choose... hours and Choose... minutes to complete the hole on schedule.Chose #1: 18 28Chose#2 9, 15, 45, 55 hey can you guys help me with this Qletter by my family in two long paragraph i need help with this asap!!! its due tonight!!!! HELPP!!!! exercise 11-5 (static) accounting rate of return lo p2 information for two alternative projects involving machinery investments follows: project 1 project 2 initial investment $ (120,000) $ (90,000) salvage value 0 10,000 annual income 15,000 12,000 a. compute accounting rate of return for each project. b. based on accounting rate of return, which project is preferred? Would you identify tocqueville as a proponent of socialism or a democracy? explain your answer. What does this document mean? The venerable elders of my home district explain that the reason grain is cheap despite poor harvests in recent years is due entirely to the scarcity of silver coin. The national government requires silver for taxes but disburses little silver in its expenditures. As the price of grain falls, tillers of the soil receive lower returns on their labors, and thus less land is put into cultivation. I need help asap please Let f(x)=7x and g(x)=7x+24. Which transformations are needed to transform the graph of f(x) to the graph of g(x)? Select each correct answer. Responses horizontal translation 2 units left vertical translation 2 units up vertical translation 4 units down horizontal translation 2 units righthorizontal translation 4 units leftvertical translation 4 units up what is the most important influence that moderates the temperatures thought western europe? Choose the correct way to rewrite the following sentence using direct and indirect object pronouns.Mi amiga siempre dijo la verdad a m.- Mi amiga siempre dijo me la.- Mi amiga siempre me la dijo.- Mi amiga siempre la dijo me.- Mi amiga siempre la me dijo. pure products is introducing a new paper coffee filter at a dramatically reduced cost in order to obtain a market share. this is an example of: discuss the advantages and disadvantages of different methods you could use to help minimise the health problems of using the computer opinions: y= -3x + 5, y = - 1/5x + 3, y= 1/3x + 1/5, y=1/3x + 5, y= 3x + 1/5