A 3.06 gram sample of an unknown hydrocarbon with empirical formula CH2O was found to contain 0.0170 moles of the substance. What are the molecular mass and molecular formula, respectively, of the compound

Answers

Answer 1

Answer:

180 amu

C₆H₁₂O₆

Explanation:

Step 1: Determine the molecular mass of the compound

The sample has a mass (m) of 3.06 g and it contains (n) 0.0170 moles. The molar mass M is:

M = m/n = 3.06/0.0170 mol = 180 g/mol

Then, the molecular mass is 180 amu.

Step 2: Determine the molar mass of the empirical formula.

M(CH₂O) = 1 × M(C) + 2 × M(H) + 1 × M(O)

M(CH₂O) = 1 × 12 g/mol + 2 × 1 g/mol + 1 × 16 g/mol = 30 g/mol

Step 3: Determine the molecular formula

First, we will determine "n" according to the following expression.

n = molar mass molecular formula / molar mass empirical formula

n = 180 g/mol / 30 g/mol = 6

The molecular formula is:

n × CH₂O = 6 × CH₂O = C₆H₁₂O₆


Related Questions

Silver sulfate is precipitated from solution according to the following reaction 2 AgNO3 (aq) Na2SO4 (aq) --> Ag2SO4 (s) 2 NaNO3 (aq) If 3.80 moles of AgNO3 and 3.05 moles of Na2SO4 are present initially, how many moles of excess reactant will remain after precipitation is complete

Answers

Answer:

1.15 moles of excess reactant will remain after precipitation is complete.

Explanation:

The balanced reaction is:

2 AgNO₃ (aq) + Na₂SO₄ (aq) → Ag₂SO₄ (s) + 2 NaNO₃ (aq)

By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:

AgNO₃: 2 molesNa₂SO₄: 1 moleAg₂SO₄: 1 moleNaNO₃: 2 moles

Then you can apply the following rule of three:: if by stoichiometry 2 moles of AgNO₃ reacts with 1 mole of Na₂SO₄, 3.80 moles of AgNO₃ reacts with how much moles of Na₂SO₄?

[tex]amount of moles of Na_{2}SO_{4} =\frac{1mole of Na_{2}SO_{4} * 3.80 moles of AgNO_{3} }{2 mols of AgNO_{3} }[/tex]

amount of moles of Na₂SO₄= 1.9 moles

But 3.05 moles of Na₂SO₄ are available. Since you have more moles than you need to react with 3.80 moles of AgNO₃, Na₂SO₄ will be the excess reagent.

To calculate the amount of excess reagent that will remain, you must make the difference between the amount you initially have and the amount that reacts:

3.05 moles - 1.9 moles= 1.15 moles

1.15 moles of excess reactant will remain after precipitation is complete.

In what form is energy that is NOT used for life processes released from living things?

1. Thermal energy
2. Chemical energy
3. Light energy
4. Sound energy

Answers

Answer:

Correct answer would be Option 2, Chemical Energy

Hope this helps!

Helpppp

What is the volume of 2.99 moles of C3H8 at STP?

0.0680L
5.87 L
ОООО
1.52 L
67.0L

Answers

Answer:

67.0 L

Explanation:

Step 1: Given data

Moles of C₃H₈: 2.99 molPressure: 1 atm (standard pressure)Temperature: 273.15 K (standard temperature)

Step 2: Calculate the volume occupied by 2.99 moles of C₃H₈ at STP

C₃H₈ is a gas. If we assume ideal behavior, 1 mole of C₃H₈ at STP occupies 22.4 L.

2.99 mol × 22.4 L/1 mol = 67.0 L

Which hydrocarbon is saturated?

A)
heptyne
B)
butane
C)
propene
D)
ethyne

Answers

A saturated hydrocarbon is an alkane. It has a single bond between the Carbon atoms (C-C). Hence, the saturated hydrocarbon is B) butane.

Which of the choices below has more heat being transferred as thermal energy from one place to another?
A. A bowl of ice water
B. A pot of boiling water

Answers

Answer:

B

Explanation:

So, a pot of boliling is hot right? of course, since it is hot thermal energy will be transferred from one place to another. I don't know if this is correct but I just wanted to give it a try.

I want to know which ones are molecular equation, complete ionic equation and net ionic equation

Answers

Answer:

The molecular equations are:

1. CuSO₄ (aq) + 2 KOH (aq) ----> Cu(OH)₂ (s) + K₂SO₄ (aq)

2. Ba(NO₃)₂ (aq) + K₂SO₄ (aq) + BaSO₄ (s) + 2 KNO₃ (aq)

The complete ionic equations are:

1. Ag + (aq) + NO₃- (aq) + I- (aq) + Na (aq) ---> AgI (s) + No₃- (aq) + Na+ (aq)

2. Cu²+ + SO₄²- (aq) + 2 K+ (aq) + 2 OH- (aq) ---> Cu(OH)₂ (s) + 2K+ (aq) + SO₄²- (aq)

The net ionic equations are:

1. Ca²+ (aq) + SO₄²- (aq) ---> CaSO₄ (s)

2. Ba²+ (aq) +SO₄²- (aq) ---> BaSO₄ (s)

Explanation:

A molecular equation is a balanced chemical equation which shows the reacting species as molecules rather than as componenet ions in their compounds with subscripts written beside the molecules to indicate the state in which they occur in the chemical reaction.

An ionic equation expresses the reacting species as components ions in a chemical reation. All the ions and molecules reacting are shown.

In a net ionic equation, the ions which remain in the ionic state also known as spectator ions are not written as part of the equation.

From the given attachment;

The molecular equations are:

1. CuSO₄ (aq) + 2 KOH (aq) ----> Cu(OH)₂ (s) + K₂SO₄ (aq)

2. Ba(NO₃)₂ (aq) + K₂SO₄ (aq) + BaSO₄ (s) + 2 KNO₃ (aq)

The complete ionic equations are:

1. Ag + (aq) + NO₃- (aq) + I- (aq) + Na (aq) ---> AgI (s) + No₃- (aq) + Na+ (aq)

2. Cu²+ + SO₄²- (aq) + 2 K+ (aq) + 2 OH- (aq) ---> Cu(OH)₂ (s) + 2K+ (aq) + SO₄²- (aq)

The net ionic equations are:

1. Ca²+ (aq) + SO₄²- (aq) ---> CaSO₄ (s)

2. Ba²+ (aq) +SO₄²- (aq) ---> BaSO₄ (s)

Calculate the number of milliliters of 0.587 M NaOH required to precipitate all of the Fe3 ions in 197 mL of 0.654 M FeCl3 solution as Fe(OH)3. The equation for the reaction is: FeCl3(aq) 3NaOH(aq) Fe(OH)3(s) 3NaCl(aq)

Answers

Answer: The number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].

Explanation:

The reaction equation is as follows.

[tex]FeCl_{3}(aq) + 3NaOH(aq) \rightarrow Fe(OH)_{3}(s) + 3NaCl(aq)[/tex]

Therefore, moles of [tex]Fe(OH)_{3}[/tex] are calculated as follows.

Moles = Molarity of [tex]Fe(OH)_{3}[/tex]  [tex]\times[/tex] Volume (in L)

= 0.654 M [tex]\times[/tex] 0.197 L  

= 0.128 mol

Now, according to the given balanced equation 1 mole of [tex]FeCl_{3}(aq)[/tex] reacts with 3 moles of NaOH(aq). Hence, moles of [tex]Fe(OH)_{3}[/tex]  reacted are calculated as follows.

3 [tex]\times[/tex] 0.128 mol = 0.384 moles of NaOH

As moles of NaOH present are as follows.

Moles of NaOH = Molarity of NaOH [tex]\times[/tex] Volume (in L)

0.384 mol = 0.587 M [tex]\times[/tex] Volume (in L)

Volume (in L) = 0.654 L (1 L = 1000 mL) = 654 mL

Thus, we can conclude that the number of milliliters of 654 mL for 0.587 M NaOH required to precipitate all of the [tex]Fe^{3+}[/tex] ions in 197 mL of 0.654 M [tex]FeCl_{3}[/tex] solution as [tex]Fe(OH)_{3}[/tex].

8. What does the term 'sustainable mean? *

Answers

Answer:

something that can be maintained over a period of time

Answer:

a balance between meeting today's needs.......

Explanation:

What are the characteristics of ionic compounds?​

Answers

Answer:

the characteristics of ionic compounds are :

1.They form crystals.

2.They are hard and brittle.

Answer:

they form crystals.

they have high melting and boiling points.

they are hard and brittle.

they are good insulators.

when dissolve in water...they dissociate Into ions.

What is the molarity if 6664 grams of boron iodide is dissolved in 5.25 liters of water?

Answers

Answer:

3.24 mol/L

Explanation:

Given that:

mass of Boron triiodide = 6664 grams

molar mass of BI_3 = 391.52 g/mol

Recall that:

number of moles = mass/molar mass

number of moles = 6664 g /391.52 g/mol

number of moles = 17.02 mol

Also;

Molarity = moles for solute/liter for solution

= 17.02 mol/5.25 L

= 3.24 mol/L

True or false? An organism may play more than one role in a food web

Answers

Answer:

True

Explanation:

Your welcome! :) Good luck!

Of the below gases, which would deviate most from ideal gas behavior? CO O2 NH3 SF4

Answers

Answer:

For gases such as hydrogen, oxygen, nitrogen, helium, or neon, deviations from the ideal gas law are less than 0.1 percent at room temperature and atmospheric pressure. Other gases, such as carbon dioxide or ammonia, have stronger intermolecular forces and consequently greater deviation from ideality.

Explanation:

163 mL of 2.75 mol/L aluminum sulfate is to have all aluminum ions removed by adding a 3.65 mol/L sodium sulfide solution.
Al2(SO4)3(aq) + 3 Na2S(aq) → Al2S3(s) + 3 Na2SO4(aq)

What is the minimum volume of sodium sulfide that must be added to completely remove all the aluminum ions? What mass of aluminum sulfide will form?

Answers

Answer:

[tex]V_{Na_2S}=368mL[/tex]

[tex]m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Explanation:

Hello there!

In this case, according to the given information, it is possible to realize that the only way for us to calculate the required volume of sodium sulfide, is by calculating the moles of this substance consumed 163 mL of 2.75 mol/L aluminum sulfate by using the definition of molar concentration and the 1:3 mole ratio between these two:

[tex]n_{Na_2S}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{3molNa_2S}{1molAl_2(SO_4)_3} =1.34molNa_2S[/tex]

Now, we divide these moles by the molar concentration of sodium sulfide to obtain the required volume:

[tex]V_{Na_2S}=\frac{1.34molNa_2S}{3.65mol/L} =0.368L=368mL[/tex]

For the last part, we now use the 1:1 mole ratio of aluminum sulfate to aluminum sulfide and the molar mass of the latter (150.158 g/mol) in order to calculate the required mass:

[tex]m_{Al_2S_3}=0.163L*2.75\frac{molAl_2(SO_4)_3}{L}*\frac{1molAl_2S_3}{1molAl_2(SO_4)_3} *\frac{150.158gAl_2S_3}{1molAl_2S_3} \\\\m_{Al_2S_3}=67.3gAl_2S_3[/tex]

Regards!

Which substance has Delta.Hf defined as 0 kJ/mol? H2O (s) Ne (l) F2 (g) CO2 (g)

Answers

Answer:

F2 (g)

Explanation:

Edg 2021

Answer:

F2 g

Explanation:

Copper metal has a specific heat of 0.385 J/g.C. calculate the amount of heat required to raise the temperature of 22.8g of copper metal from 20.0C to 875°C

Answers

Answer:

7505.19 J

Explanation:

We'll begin by calculating the change in the temperature of copper. This can be obtained as follow:

Initial temperature (T₁) = 20 °C

Final temperature (T₂) = 875 °C

Change in temperature (ΔT) =?

ΔT = T₂ – T₁

ΔT = 875 – 20

ΔT = 855 °C

Finally, we shall determine the heat required. This can be obtained as follow:

Specific heat capacity (C) = 0.385 J/gºC

Change in temperature (ΔT) = 855 °C

Mass (M) = 22.8 g

Heat (Q) required =?

Q = MCΔT

Q = 22.8 × 0.385 × 855

Q = 7505.19 J

Thus, 7505.19 J of heat energy is required.

Hydrogen gas was cooled from 150 K to 50 K. Its new volume (V2) is 75 mL. What was its original volume (V1)?

Answers

Explanation:

57.3ml

we use Charles's law

to solve the question

Answer:

[tex]\boxed {\boxed {\sf 225 \ mL}}[/tex]

Explanation:

The temperature and volume of the gas are changing, so we use Charles's Law. This states the temperature of a gas is directly proportional to the volume of a gas. The formula is:

[tex]\frac{V_1}{T_1}=\frac{V_2}{T_2}[/tex]

The original volume is unknown. The new volume is 75 milliliters.

The gas is cooled from 150 Kelvin to 50 Kelvin, so the original temperature is 150 K and the new temperature is 50 K.

We know that:

T₁= 150 K V₂= 75 mL T₂= 50 K

Substitute the values into the formula.

[tex]\frac {V_1}{150 \ K}=\frac{ 75 \ mL}{50 \ K}[/tex]

Since we are solving for the original volume, we must isolate the variable V₁.

It is being divided by 150 K. The inverse of division is multiplication, so we multiply both sides by 150 K.

[tex]150 \ K *\frac {V_1}{150 \ K}=\frac{ 75 \ mL}{50 \ K}* 150 \ K[/tex]

[tex]V_1=\frac{ 75 \ mL}{50 \ K}* 150 \ K[/tex]

The units of Kelvin (K) cancel.

[tex]V_1= \frac{ 75 \ mL}{50 }* 150[/tex]

[tex]V_1=1.5 * 150 \ mL[/tex]

[tex]V_1= 225 \ mL[/tex]

The original volume is 225 milliliters.

To run a spectrophotometry experiment, begin by _______ the spectrophotometer and preparing the samples. Be sure to select the correct ________, then run a measurement on the _______ solution. Follow up by running measurements on _______ solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.
1.
a) cleaning
b) warming up
c) unplugging
2.
a) wavelength
b) transmittance
c) absorbance
3.
a) blank
b) aqueous
c) sample
4.
a) blank
b) aqueous
c) sample

Answers

Answer:

b) warming up a) wavelength a) blank c) sample

Explanation:

To run a spectrophotometry experiment, begin by warming up the spectrophotometer and preparing the samples. It is important that the equipment is warmed up for at least 30 minutes before starting the measurements.

Be sure to select the correct wavelength, then run a measurement on the blank solution. The selected wavelength depends on the analyte of interest. The black solution contains the same matrix but it doesn´t contain the analyte.

Follow up by running measurements on sample solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples. The samples are those of unknown concentration that we want to determine.

To run a spectrophotometry experiment, begin by cleaning the spectrophotometer and preparing the samples. Be sure to select the correct wavelength, then run a measurement on the sample solution. Follow up by running measurements on aqueous solutions. Once data is collected, turn off the instrument, clean the area, and discard the samples.

Spectrophotometry is a technique used to measure the interaction of light with matter, specifically the absorption, transmission, or reflection of light by a sample. It involves the use of a spectrophotometer, an instrument that measures the intensity of light as a function of its wavelength or frequency.

In spectrophotometry, a sample is exposed to light of a specific wavelength or a range of wavelengths. The sample may absorb certain wavelengths of light, which can be detected and measured by the spectrophotometer. The amount of light absorbed is related to the concentration of the analyte in the sample, allowing for quantitative analysis.

Learn more about Spectrophotometry, here:

https://brainly.com/question/30626061

#SPJ6

Name the subatomic parts of the atom, their charges and where they are located.

Answers

Answer:

protons: positively charged, located in the nucleus

electrons: negatively charged, located outside the nucleus

neutrons: no charge, located in the nucleus

Please help me complete this, it’s my last chance

Answers

Protons: charge: +1 // mass: 1 // location: nucleus

Neutrons: charge: 0// mass: 1 // location: nucleus

Electrons: charge: -1// mass: 0// location: orbitals

Order the following chemicals from lowest to highest melting point.
Tungsten
Copper (II) chloride
• Caffeine
• Lead
• Sodium chloride
• Silver

Answers

Answer

• Silver

• copper

What's 2+7 hehdhenbeidbnejdbdbdbdi

Answers

Answer:

Answer

9......

Explanation:

Explaination:

rank in order the strongest to the weakest acid cbr3cooh, ch3cooh and ccl3cooh

Answers

Answer: Rank in order the strongest to the weakest acid is [tex]CCl_{3}COOH[/tex] >  [tex]CBr_{3}COOH[/tex] >  [tex]CH_{3}COOH[/tex].

Explanation:

More readily a substance is able to donate a hydrogen ion more will be its acidic strength. Hence, stronger will be the acid.

More is the electronegativity of atoms attached to the acid more easily it will donate a proton. Hence, more will be its acidic strength.

Chlorine is more electronegative in nature as compared to bromine. So,

[tex]CCl_{3}COOH[/tex] is more acidic than [tex]CBr_{3}COOH[/tex].

Since there is no electronegative group attached to [tex]CH_{3}COOH[/tex] so it is least acidic than [tex]CCl_{3}COOH[/tex] and [tex]CBr_{3}COOH[/tex].

Thus, we can conclude that rank in order the strongest to the weakest acid is [tex]CCl_{3}COOH[/tex] >  [tex]CBr_{3}COOH[/tex] >  [tex]CH_{3}COOH[/tex].

so de fanga gu se si gage humang we sapa shata phoni we heo sang pai​

Answers

Answer:

Which language is this???

How many moles of electrons must be transferred to plate out 110 g of manganese (MW ~ 55g/mol) from a solution of permanganate (MnO4-)

Answers

Answer:

14 mol e⁻

Explanation:

Step 1: Write the balanced half-reaction for the reduction of permanganate to manganese

8 H⁺(aq) + 7 e⁻ + MnO₄⁻(aq) ⇒ Mn(s) + 4 H₂O(l)

Step 2: Calculate the moles corresponding to 110 g of manganese

The molar mass of Mn is 55 g/mol.

110 g × 1 mol/55 g = 2 mol

Step 3: Calculate the number of moles of electrons needed to produce 2 moles of Mn

According to the half-reaction, 7 moles of electrons are required to produce 1 mole of Mn.

2 mol Mn × 7 mol e⁻/1 mol Mn = 14 mol e⁻

The relationship between the volume and mass of an element is

Answers

Answer:

Density

Explanation:

The mass of an element is the average weight that the isotope of the particular element contains. Its characteristic indicates the amount of substance present in an element.

However, the volume of an element on the other hand is the mole of an element that is contained in a room temperature.

The relation joining both the mass and volume of an element is density.

This is because density showcase the relationship between the mass of an element to space in occupies in terms of volume.

It is given by the formula:

Density = mass/volume

The temperature of a sample of silver increased by 23.8 °C
when 261 J of heat was applied.
What is the mass of the sample?

Answers

Answer:

46.67 g

Explanation:

From the question given above, the following data were obtained:

Change in temperature (ΔT) = 23.8 °C

Heat (Q) = 261 J

Specific heat capacity (C) of silver = 0.235 J/gºC

Mass of silver (M) =?

The mass of the sample of silver can be obtained as follow:

Q = MCΔT

261 = M × 0.235 × 23.8

261 = M × 5.593

Divide both side by 5.593

M = 261 / 5.593

M = 46.67 g

Thus, the mass of the sample of silver is 46.67 g

A rock was weighed on a balance and found to have a mass of 34.56 grams. It was placed into water that was in a graduated cylinder. Before the rock was dropped into the water the water level was 22.7 mL. The addition of the solid object caused the water level to rise to 28.1 mL. What is the density of the rock?

Answers

Answer:

5 and the rest are all set to the same date on your list as the other one to get you a list on for a your special first year week and with a special holiday party holiday

Explanation:

Sorry desperate for points

2. Energy cycles through ecosystems because it returns to the sun.


True or false


Please help I will give 50 points

Answers

Answer:

false

Explanation:

energy does not return to the sun, it returns to the plants or producers. if energy were to return to the sun, it would have to travel though space.

False or doesn’t, Energy does not cycle the way nutrients and atoms do.

You are given a 250 ml sample of HCI and asked to find out what its concentration is. You have a 0 118 M Ca(OH)2 solution and it takes 13.7 ml to
neutralize the acid sample. What is the concentration of the HCI? Show explanation Please help this is urgent

Answers

Answer:

The concentration of the acid, HCl is 0.013 M

Explanation:

We'll begin by writing the balanced equation for the reaction. This is illustrated below:

2HCl + Ca(OH)₂ —> CaCl₂ + 2H₂O

From the balanced equation above,

The mole ratio of the acid, HCl (nₐ) = 2

The mole ratio of base, Ca(OH)₂ (n₆) = 1

Finally, we shall determine the molarity of the HCl. This can be obtained as follow:

Volume of acid, HCl (Vₐ) = 250 mL

Molarity of base, Ca(OH)₂ (M₆) = 0.118 M

Volume of base, Ca(OH)₂ (V₆) = 13.7 mL

Molarity of acid, HCl (Mₐ) =?

MₐVₐ / M₆V₆ = nₐ/n₆

Mₐ × 250 / 0.118 × 13.7 = 2/1

Mₐ × 250 / 1.6166 = 2

Cross multiply

Mₐ × 250 = 1.6166 × 2

Mₐ × 250 = 3.2332

Divide both side by side 250

Mₐ = 3.2332 / 250

Mₐ = 0.013 M

Thus, the concentration of the acid, HCl is 0.013 M

You deserve 0.72G of potassium chloride (KCI) in 600 ml of water. What is the molarity of the solution ?

Answers

Answer:

0.016 M

Explanation:

Molarity refers to the molar concentration of a solution and it can be calculated using the formula below:

Molarity (M) = number of moles (n) ÷ volume (V)

According to this question, the mass of KCl was given to be 0.72 grams and the volume of water as 600 mL.

Using mole = mass/molar mass to convert mass of KCl to moles

Molar mass of KCl = 39 + 35.5 = 74.5g/mol

mole = 0.72g ÷ 74.5g/mol

mole = 0.00966mol

Volume of water = 600mL = 600/1000 = 0.600L

Molarity, M = 0.00966 ÷ 0.600

Molarity of KCl solution = 0.016 M

Other Questions
Read the sentence below and answer the question.I waited until 7 o'clock, but my friends never showed up to see the movie.Which of the following groups of words make up the prepositional phrase in the sentence above?a. until 7 o'clockb. to see the moviec. but my friendsd. never showed up 4. Which makes up most of Earth's surface? (1) theatmosphere (2) the lithosphere (3) the hydrosphereOption 1Option 2Option 3 What is the measurement shown ? Let p: A number is greater than 25.Let q: A.number is less than 35.If p ^ q is true, then what could the number be? Select two options. Adam writes this sentence in his analysis of The Code Book. " The Code Book contains many specialized terms. "Which line from the book best supports his analysis?A. Codebreakers continue to use old-fashioned techniquesB. This would allow Eve to intercept the message as it is typed into the computerC. Eve's task is made considerably easier if Alice sends her invitations by e-mailD. The Trojan horse is a brand-new piece of encryption software that seems secure What was "The Bridge"?This is an Art History question. To convert 120 ounces to pounds, which of the following proportions should you use?ANSWER VERY QUICKLY PLEASE!!!! NEED ANSWERS ASAP. Gloria set aside $100 to buy school lunches for the year. Each school lunch cost $2. The inequality 100 2x < 20 can be used to find the number of school lunches Gloria can buy before she has less than $20 left. What is the solution to this inequality? Calculate the area of sector if the angle is 45 degrees and the radius is 15cm the value of x which makes 2/3(1/4x-2)=1/5(4/3x-1)PLEASE ANSWER ASAP 45 POINTS !!! La funcin C(x) = 400 % - 0.2 x 2 representa los costos totales de una empresa para producir urel costo total en dlares yx es el nmero de unidades vendidas. Qu afirmacin es verdadera?Mil unidades tienen el costo mnimo de $ 200,000.O Mil unidades tienen un costo mximo de $ 200,000.O Dos mil unidades tienen un costo mnimo de $ 800,000.O Dos mil unidades tienen un costo mximo de $ 800,000. A line passes through the point (4, -3) and has a slope of -3. Write an equation in slope-intercept form for this line. pLEASE NO LINKS correct ans only What is the value of log 10? $6300 is invested, part of it at 11% and part of it at 6%. For a certain year, the total yield is $533.00. How much was invested at each rate?$___ was invested at 11% Plisssss daje naj za ca stron Solve the equation x =far for r.A. r ==3347OOB. r = 3.0 45c. r =47132O D. r= 3x (41) the answer of82.4 - 25 How much is 106 divided by 6? A) 17 R2 B)17 R3 C)17 R4 D)17 R1 The values in the table represent a function.A 2-column table with 5 rows. The first column is labeled x with entries negative 6, 7, 4, 3, negative 5. The second column is labeled f of x with entries 8, 3, negative 5, negative 2, 12.Use the drop-down menus to complete the statements. The ordered pair given in the first row of the table can be written using function notation as.f(3) is.f(x) = 5 when x is.