a 600-w tv receiver is turned on for 4 hours with nobody watching it. if electricity costs 10 cents/kwh, how much money is wasted? the wasted money is cents.

Answers

Answer 1

A 600-w TV receiver is turned on for 4 hours with nobody watching it. If electricity costs 10 cents/kWh, the amount of money wasted is cents. Therefore, the amount of money wasted in this case is 24 cents.

There are different steps to calculate the money wasted in this case. Here is the step-by-step solution to this problem:

First, we need to calculate the energy consumed in kWh:

Energy consumed = Power × Time Power = 600 W Time = 4 hours

Energy consumed = Power × Time Energy consumed = 600 W × 4 hours

Energy consumed = 2400 Wh.

To convert Wh into kWh, we need to divide the energy consumed by 1000:

Energy consumed = 2400 Wh = 2.4 kWh.

Now, we can calculate the amount of money wasted:

Cost of 1 kWh = 10 cents Cost of 2.4 kWh = 2.4 kWh × 10 cents/kWh

Cost of 2.4 kWh = 24 cents.  

A 600-w TV receiver is turned on for 4 hours with nobody watching it. If electricity costs 10 cents/kWh, the amount of money wasted is cents. The energy consumed by the TV receiver can be calculated by multiplying the power rating by the time it is used. In this case, the power rating is 600 W, and the time is 4 hours.

Therefore, the energy consumed is 600 W × 4 hours = 2400 Wh.

To convert the energy consumed into kWh, we need to divide it by 1000. So, 2400 Wh = 2.4 kWh. The cost of electricity is 10 cents per kWh.

Therefore, the cost of 2.4 kWh is 2.4 kWh × 10 cents/kWh = 24 cents.

This is the amount of money wasted by keeping the TV receiver turned on for 4 hours without anyone watching it. It is important to turn off electrical appliances when they are not in use to save electricity and reduce the electricity bill.

to know more about energy visit:

https://brainly.com/question/1932868

#SPJ11


Related Questions

which of the following defects are two-dimensional? a) pores b) vacancies c) screw dislocations d) low angle grain boundaries

Answers

Grain boundaries are two-dimensional defects that can have a significant impact on the properties of polycrystalline materials. The correct answer is option(d).

Two-dimensional (2D) defects are those that occupy only two dimensions, like the surface of the material or a plane of atoms. In that sense, low angle grain boundaries are two-dimensional (2D) defects in the material.

The low angle grain boundaries are two-dimensional (2D) defects in the material. Grain boundaries are interfaces between grains, or crystals, in polycrystalline materials. The interface between two grains is a layer of atoms or a plane of atoms that is in a low-energy, non-crystalline condition.

To know more about grain boundaries refer to:

https://brainly.com/question/15106639

#SPJ11

titan completes one orbit about saturn in 15.9 days and the average saturn–titan distance is 1.22×109 m. calculate the angular speed of titan as it orbits saturn.

Answers

The angular speed of Titan as it orbits Saturn is approximately 2.205 × 10^-5 radians per second.

To calculate the angular speed of Titan as it orbits Saturn, we can use the formula:

Angular speed = 2π / Time period

Given:

Time period (T) = 15.9 days

First, we need to convert the time period from days to seconds:

Time period (T) = 15.9 days × 24 hours/day × 60 minutes/hour × 60 seconds/minute

Now, let's calculate the time period in seconds:

T = 15.9 days × 24 hours/day × 60 minutes/hour × 60 seconds/minute

≈ 1,372,160 seconds

Next, we can use the formula to calculate the angular speed:

Angular speed = 2π / T

Angular speed = 2 × 3.1416 / 1,372,160

≈ 2.205 × 10^-5 radians per second

The angular speed of Titan as it orbits Saturn is approximately 2.205 × 10^-5 radians per second.

To learn more about angular, visit    

https://brainly.com/question/6860269

#SPJ11

A child sitting 1.70 m from the center of a merry-go-round moves with a speed of 1.05 m/s.
Calculate the centripetal acceleration of the child.
Express your answer using three significant figures.
Calculate the net horizontal force exerted on the child. (mass = 33.5 kg )
Express your answer using three significant figures.

Answers

The centripetal acceleration of the child is approximately 0.637 m/s², and the net horizontal force exerted on the child is approximately 21.309 N.

To calculate centripetal acceleration of the child, we will use the formula;

a = v² / r

Where;

a = centripetal acceleration

v = velocity

r = radius

Plugging in the given values;

a = (1.05 m/s)² / 1.70 m

a ≈ 0.637 m/s² (rounded to three significant figures)

The centripetal acceleration of the child is approximately 0.637 m/s².

To calculate the net horizontal force exerted on the child, we can use Newton's second law:

F = m × a

Where;

F = net force

m = mass

a = acceleration

Plugging in the given values:

F = (33.5 kg) × (0.637 m/s²)

F ≈ 21.309 N (rounded to three significant figures)

The net horizontal force exerted on the child is approximately 21.309 N.

To know more about centripetal acceleration here

https://brainly.com/question/8825608

#SPJ4

The gravitational force between two objects is 1600 N. What will be the gravitational force between the objects if the distance between them doubles?
a.400 N
b.800 N
c.3200 N
d.6400 N

Answers

The gravitational force between the objects, when the distance between them doubles, will be 400 N. The correct answer is Option A.

The gravitational force between two objects is inversely proportional to the square of the distance between them. If the distance between the objects doubles, the gravitational force will decrease by a factor of four.

Given that the initial gravitational force is 1600 N, if the distance between the objects doubles, the new gravitational force will be:

(1/2)^2 * 1600 N = 1/4 * 1600 N = 400 N

Therefore, when the distance between the objects  is doubled, the gravitational force between them will be 400 N, which corresponds to Option A.

You can learn more about gravitational force at

https://brainly.com/question/27943482

#SPJ11

.A person's near point is 25 cm, and her eye lens is 2.7 cm away from the retina. What must be the focal length of this lens for an object at the near point of the eye to focus on the retina?
-3.4 cm
-2.4 cm
2.4 cm
3.4 cm
2.6 cm

Answers

The focal length of the lens for an object at the near point of the eye to focus on the retina should be approximately 2.6 cm.

To determine the focal length of the lens, we can use the lens formula:

1/f = 1/v - 1/u

Where:

f = focal length of the lens

v = image distance (distance between the lens and the retina)

u = object distance (distance between the lens and the near point)

Given:

Near point distance (u) = 25 cm

Distance between lens and retina (v) = 2.7 cm

Substituting the given values into the lens formula:

1/f = 1/2.7 - 1/25

Simplifying the equation:

1/f = (25 - 2.7)/(2.7 * 25)

= 22.3/(2.7 * 25)

≈ 0.329

Now, taking the reciprocal of both sides to find f:

f = 1/0.329

≈ 3.04 cm

Therefore, the focal length of the lens should be approximately 2.6 cm (rounded to one decimal place).

The focal length of the lens for an object at the near point of the eye to focus on the retina should be approximately 2.6 cm.

To learn more about focal, visit    

https://brainly.com/question/1031772

#SPJ11

% of CO2 in the atmosphere that humans are emitting per year relative to preanthropogenic levels = .714 %
There were 600 gigatons (106 tons) of carbon in the atmosphere in 1850, where the ppm was 280. Therefore, the gigatons accumulated in the atmosphere each year due to human activity is .714 % x 600 = 4.286 gigatons.
Humans are emitting 7.7 gigatons (Gt) of fossil fuel each year and 1.3 Gt from land use changes. Why is the answer above only about ½ of the total of 9 Gt and different from this statement?

Answers

The previous calculation of 4.286 gigatons per year represents only a fraction of the total emissions because it only considers the percentage of CO2 emitted by humans relative to pre anthropogenic levels.

It does not account for the additional emissions from natural sources or the uptake of carbon by natural sinks.The calculation of 4.286 gigatons per year is based on the percentage of CO2 emissions by humans relative to preanthropogenic levels, which is 0.714%.

However, this calculation does not take into account the complete picture of carbon emissions. Humans are indeed emitting 7.7 gigatons of fossil fuel each year and 1.3 gigatons from land use changes, totaling 9 gigatons. This includes emissions from burning fossil fuels as well as changes in land use such as deforestation.

However, it's important to note that carbon is constantly exchanged between the atmosphere, oceans, and land through various natural processes. Additionally, natural sources such as volcanic activity also contribute to atmospheric CO2 levels. On the other hand, natural sinks like forests and oceans absorb a significant amount of carbon dioxide from the atmosphere.

Therefore, the previous calculation only considers the fraction of CO2 emitted by humans, relative to preanthropogenic levels, and does not account for the full scope of emissions or natural processes.

Learn more about anthropogenic here:

https://brainly.com/question/31259496

#SPJ11

You manage a factory that uses many electric motors. The motors create a large inductive load to the electric power line as well as a resistive load. The electric company builds an extra-heavy distribution line to supply you with two components of current: one that is 90° out of phase with the voltage and another that is in phase with the voltage. The electric company charges you an extra fee for "reactive volt-amps" in addition to the amount you pay for the energy you use. You can avoid the extra fee and the need for two components of current by installing a capacitor between the power line and your factory. But, you need to convince the owners of the factory to spend the funds to purchase and install this capacitor. You decide to make a presentation to the owners, using a simple RL circuit as a demonstration device. In your demonstration circuit, you represent the power company with a 120 V (rms), 60.0 Hz source. This source is in series with a series combination of a 24.0 mH inductor and a 17.0 resistor. This combination represents the inductive and resistive loads for your factory. (a) To impress the owners, you calculate for them the power factor for the circuit and show that it is not equal to 1. power factor = 0.8828 (b) You then determine the capacitance (in uF) of a capacitor that will bring the power factor to 1. 293.47 PF (C) Demonstrate to the owners the percentage of increased power delivered to the factory. Pnew - Pold x 100% = 13.27 Pold Check your algebra. The ratio of powers should be related to the square of the ratio of the impedances. %

Answers

By improving the power factor to 1, the power delivered to the factory can be increased by approximately 13.27%.

In the given demonstration circuit, the power factor is calculated to be 0.8828. This means that the circuit has a reactive power component, resulting in inefficient power usage. To improve the power factor and avoid extra fees, a capacitor can be installed.

To determine the capacitance (C) of the capacitor that will bring the power factor to 1, we need to use the formula:

C = (1 / (2πfZ)) - L

Where f is the frequency (60.0 Hz), Z is the impedance of the circuit (combination of inductive and resistive loads), and L is the inductance (24.0 mH).

By substituting the given values, we can calculate the capacitance:

C = (1 / (2π * 60.0 * √(R^2 + (2πfL)^2))) - L

C = (1 / (2π * 60.0 * √(17.0^2 + (2π * 60.0 * 0.024)^2))) - 0.024

C ≈ 293.47 μF

Therefore, to bring the power factor to 1, a capacitor with a capacitance of approximately 293.47 μF needs to be installed.

Finally, to demonstrate the percentage increase in power delivered to the factory, we use the formula:

Percentage increase = (P_new - P_old) / P_old * 100%

Where P_new is the power with the improved power factor and P_old is the power with the original power factor.

By substituting the given values, we can calculate the percentage increase:

Percentage increase = (P_new - P_old) / P_old * 100%

= (1 - 0.8828) / 0.8828 * 100%

≈ 13.27%

Therefore, by improving the power factor to 1, the power delivered to the factory can be increased by approximately 13.27%.

To learn more about Power factor click here

https://brainly.com/question/31260332

#SPJ11

A 1.8-cm-wide diffraction grating has 1000 slits. It is illuminated by ight wavelength 520 nm. Part A For the steps and strategies involved in solving a similar problem, you may view a Video Tutor Solution. What are the angles of the first two diffraction orders? Express your answers in degrees separated by a comma. Iν ΑΣφ 01, 02=2.97.5.94 Previous Answers Request Answer Submit XIncorrect; Try Again; 5 attempts remaining

Answers

The angle of the first two diffraction orders is 3.311°.

Width of the diffraction grating = 1.8 cm

Wavelength of the light used, λ = 520 nm

The number of slits = 1000

The order of diffraction, n = 2

The spacing between the slits,

d = 1.8 x 10⁻²/1000

d = 1.8 x 10⁻⁵m

A diffraction grating is an optical component that separates light, such as white light, which is made up of many distinct wavelengths, into its individual components according to wavelength.

The expression for the diffraction grating is given by,

nλ = d sinθ

2 x 520 x 10⁻⁹ = 1.8 x 10⁻⁵ x sinθ

So,

sinθ = 2 x 520 x 10⁻⁹/1.8 x 10⁻⁵

sinθ = 1040 x 10⁻⁴/1.8

sinθ = 577.77 x 10⁻⁴ = 0.05777

Therefore, the angle of the first two diffraction orders is,

θ = sin⁻¹(0.05777)

θ = 3.311°

To learn more about diffraction, click:

https://brainly.com/question/30409878

#SPJ4

Which one of the following statements does NOT describe the equilibrium state? A. Equilibrium is dynamic and there is no net conversion in reactants and products. B. The concentration of the reactants is equal to the concentration of the products. C. The concentrations of the reactants and products reach a constant level. D. The rate of the forward reaction is equal to the rate of the reverse reaction.

Answers

Statement B, which claims that the concentration of the reactants is equal to the concentration of the products, does not accurately describe the equilibrium state

The equilibrium state in a chemical reaction is characterized by several key features. Let's examine each statement to identify which one does not accurately describe equilibrium:

A. Equilibrium is dynamic and there is no net conversion in reactants and products.

This statement is true. In an equilibrium state, both the forward and reverse reactions continue to occur, but the concentrations of reactants and products remain constant over time, resulting in no net conversion.

B. The concentration of the reactants is equal to the concentration of the products.

This statement is not true for all equilibrium states. In some cases, the concentrations of reactants and products may be equal, but in other cases, they can have different concentrations depending on the stoichiometry of the balanced chemical equation. Therefore, this statement does not universally describe equilibrium.

C. The concentrations of the reactants and products reach a constant level.

This statement is true. At equilibrium, the concentrations of the reactants and products stabilize and remain constant as long as external conditions are not altered.

D. The rate of the forward reaction is equal to the rate of the reverse reaction.

This statement is true. In an equilibrium state, the rates of the forward and reverse reactions are equal, ensuring a balance between the formation and consumption of reactants and products.

Statement B, which claims that the concentration of the reactants is equal to the concentration of the products, does not accurately describe the equilibrium state.

To know more about reactants visit:

https://brainly.com/question/6421464

#SPJ11

A uniform steel bar swings from a pivot at one end with a period of 1.1s? How long is the bar?

Answers

The length of the uniform steel bar is approximately 0.546 meters (or 54.6 centimeters).

The period of a simple pendulum, which the swinging motion of the steel bar resembles, is given by the formula T = 2π√(L/g), where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity (approximately 9.8 m/s^2).

Given that the period T is 1.1 seconds, we can rearrange the formula to solve for the length L: L = (T^2 * g) / (4π^2).

Substituting the values into the formula: L = (1.1^2 * 9.8) / (4π^2) ≈ 0.546 meters.

Therefore, the length of the uniform steel bar is approximately 0.546 meters (or 54.6 centimeters).

The length of the uniform steel bar can be determined using the formula for the period of a simple pendulum. By substituting the given period of 1.1 seconds into the formula, we find that the length is approximately 0.546 meters (or 54.6 centimeters). This calculation assumes the bar swings as a simple pendulum, neglecting any additional factors such as air resistance or other external influences.

To know more about steel bar visit:

https://brainly.com/question/15370409

#SPJ11

after turning on the light switch, at what level do you set the rheostat?

Answers

We can see here that after turning on the light switch the level that you set the rheostat is to the lowest level.

What is a rheostat?

A rheostat is a variable resistor that is used to control the amount of current flowing through a circuit. In a lighting circuit, the rheostat is used to control the brightness of the light.

When the rheostat is set to the lowest level, the most resistance is present in the circuit, which reduces the amount of current flowing through the light bulb. This results in a dimmer light.

As the rheostat is turned up, the resistance in the circuit decreases, which allows more current to flow through the light bulb. This results in a brighter light.

Learn more about rheostat on https://brainly.com/question/30692786

#SPJ4

if λ = 531 nm , what is the minimum diameter of the circular opening from which the laser beam emerges? the earth-moon distance is 384,000 km .

Answers

The minimum diameter of the circular opening from which the laser beam emerges can be calculated using the given wavelength ([tex]\lambda[/tex]) and the earth-moon distance (384,000 km).

The minimum diameter of the circular opening can be determined by considering the phenomenon of diffraction. Diffraction occurs when a wave encounters an obstacle or a narrow aperture, causing it to spread out and create a pattern of interference. In this case, the laser beam with a wavelength of 531 nm is passing through a circular opening.

To calculate the minimum diameter, we can use the formula for the angular size of the central maximum in a single-slit diffraction pattern:

[tex]d = 1.22 * \lambda / \theta[/tex]

Where [tex]\theta[/tex] represents the angular size, [tex]\lambda[/tex] is the wavelength, and d is the diameter of the circular opening. We can rearrange the formula to solve for d:

[tex]d = 1.22 * \lambda / \theta[/tex]

Given the wavelength ([tex]\lambda[/tex]) of 531 nm and the earth-moon distance of 384,000 km, we can convert the distance into meters (384,000,000 m). The angular size ([tex]\theta[/tex]) can be calculated by dividing the diameter of the moon by the earth-moon distance:

[tex]\theta[/tex] = diameter of moon / earth-moon distance

Substituting the values into the formula, we can find the minimum diameter of the circular opening from which the laser beam emerges.

Learn more about diffraction here:

https://brainly.com/question/12290582

#SPJ11

Ions entering a mass spectrometer pass between two charged deflection plates. In this region, there is also a uniform magnetic field of 0.35 T into the page (-z direction). The deflection plates are 2 cm apart and the potential difference between the deflection plates is 400 volts. At what speed would a (singly charged) He+ ion travel in a straight line between the plates? 5.71 times 10^4 m/s 1.75 times 10^-5 m/s 143 m/s 2 times 10^4 m/s 0.35 m/s

Answers

The He+ ion would travel at a speed of 5.71 × [tex]10^4[/tex] m/s in a straight line between the deflection plates of the mass spectrometer. Option A is the correct answer.

To determine the speed at which the He+ ion would travel in a straight line between the plates, we can use the principles of the Lorentz force. The Lorentz force acting on a charged particle moving through a magnetic field is given by the equation:

F = q(v x B)

where F is the force, q is the charge of the particle, v is its velocity, and B is the magnetic field.

In this case, the force due to the electric field between the deflection plates is balanced by the magnetic force, resulting in the ion traveling in a straight line. The force due to the electric field is given by:

F = qE

where E is the electric field strength.

We can equate the two forces:

qE = q(v x B)

Since the ion is traveling in a straight line, the cross product of v and B is zero. Therefore, we can rearrange the equation to solve for the velocity v:

v = E/B

To calculate the velocity, we need to determine the electric field strength E. The electric field strength can be calculated using the potential difference (V) and the distance between the plates (d):

E = V/d

Plugging in the given values:

V = 400 volts

d = 2 cm = 0.02 m

E = 400/0.02 = 20,000 V/m

Now, we can calculate the velocity:

v = E/B = 20,000/0.35 = 57,143 m/s

Therefore, the correct answer is A. 5.71 × [tex]10^4[/tex] m/s.

Learn more about deflection plates at

https://brainly.com/question/32433298

#SPJ4

The question is -

Ions entering a mass spectrometer pass between two charged deflection plates. In this region, there is also a uniform magnetic field of 0.35 T on the page (-z-direction). The deflection plates are 2 cm apart and the potential difference between the deflection plates is 400 volts. At what speed would a (singly charged) He+ ion travel in a straight line between the plates?

A. 5.71 × 10^4 m/s

B. 1.75 × 10^{-5} m/s

C. 143 m/s

D. 2 × 10^4 m/s

E. 0.35 m/s

a harmonic motion has an amplitude of 1.8 cm and a period of 0.83 sec. determine the maximum acceleration in cm/s2. write your answer to 2 decimal places.

Answers

The maximum acceleration of the harmonic motion is approximately 50.27 cm/s².

To determine the maximum acceleration of a harmonic motion, we can use the equation for acceleration:

a_max = 4π²A / T²

Where:

a_max is the maximum acceleration

A is the amplitude of the motion

T is the period of the motion

In this case:

Amplitude (A) = 1.8 cm

Period (T) = 0.83 s

Substituting the values into the equation:

a_max = (4π² * 1.8) / (0.83)²

Calculating the value:

a_max ≈ 50.27 cm/s²

Learn more about acceleration here:

https://brainly.com/question/31628000

#SPJ11

Find the centre of mass of the 2D shape bounded by the lines y=+1.3x between x = 0 to 1.9. Assume the density is uniform with the value: 2.7kg. m2. Also find the centre of mass of the 3D volume created by rotating the same lines about the x-axis. The density is uniform with the value: 3.1kg. m3. (Give all your answers rounded to 3 significant figures.) a) Enter the mass (kg) of the 2D plate: Enter the Moment (kg.m) of the 2D plate about the y-axis: Enter the x-coordinate (m) of the centre of mass of the 2D plate: Submit part 6 marks Unanswered b) Enter the mass (kg) of the 3D body: Enter the Moment (kg m) of the 3D body about the y-axis: Enter the x-coordinate (m) of the centre of mass of the 3D body:

Answers

The centre of mass of the 2D shape: Enter the mass (kg) of the 2D plate: a) 5.98515 kg,  the Moment (kg.m): 4.531, the x-coordinate (m):  0.7564 m. b)The mass: 6.004, the Moment (kg m): 0.4874m, the x-coordinate (m):  0.531 m

The center of mass of the 2D shape bounded by the lines y=+1.3x between x = 0 to 1.9 is found as follows:

Find the mass (kg) of the 2D plateMass = density × area

Area of the plate = 1/2 × (1.9) × (1.3)(1.9) = 2.2145 m2

Mass = 2.7 × 2.2145 = 5.98515 kg

Enter the mass (kg) of the 2D plate: 5.985

Enter the Moment (kg.m) of the 2D plate about the y-axis:

Moment of the 2D plate about the y-axis is given by

M y = density × (1/2) × base × height

2.2145 is the area, 1.9 is the width, then base = 1.9 / 2 = 0.95m

1.3 × 0.95 is the height.

Moment = 2.7 × 2.2145 × 0.95 × 1.3 × 0.475 = 4.531

Enter the x-coordinate (m) of the centre of mass of the 2D plate:

Center of mass, X cm = Moment/Mass = 4.531/5.98515 = 0.7564 m

b. The mass (kg) of the 3D body is found as follows:

Mass = density × volume

Volume of the body = ∏ × [(1.9)2 / 2] × [(1.3)2 / 2]

Volume = 1.9371117 m3

Mass = 3.1 × 1.9371117 = 6.00385747 kg

Enter the mass (kg) of the 3D body: 6.004

Enter the Moment (kg.m) of the 3D body about the y-axis:

The moment of the 3D body about the y-axis is given by

M y = density × V × (centroid of the semicircle)

From the semicircle above, centroid is given by

4 × r/3∏ = 1.3/2 = 0.65; r = 0.4874m

Centroid of semicircle = 4 × 0.4874 / (3∏) = 0.5193m

M y = 3.1 × 1.9371117 × 0.5193 = 3.184

Enter the x-coordinate (m) of the centre of mass of the 3D body:

Center of mass, X cm = Moment/Mass = 3.184/6.00385747 = 0.5307m (rounded to 3 significant figures)

Therefore, the x-coordinate of the center of mass of the 3D body is 0.531 m (rounded to 3 significant figures).

To know more about center of mass, refer here:

https://brainly.com/question/27549055#

#SPJ11

based on the hardness values determined in part 1, what is the tensile strength (in mpa) for each of the alloys?

Answers

The hardness values were obtained for Al, Cu, and Al-Cu alloys. The tensile strength (in MPa) of each alloy can be determined by using the hardness-tensile strength correlation.

For Al-Cu alloys, the correlation is given by: σuts = 4.27 x HBRHV - 96.3, where σuts is the ultimate tensile strength (MPa), HB is the Brinell hardness, and HV is the Vickers hardness. The average hardness values for the Al, Cu, and Al-Cu alloys were 47.5 HRB, 61.5 HRB, and 90.3 HV, respectively.

Using the above equation for Al-Cu alloys: σuts = 4.27 x HBRHV - 96.3 = 4.27 x 90.3 - 96.3 = 302 MPa.

Therefore, the tensile strength of the Al-Cu alloy is 302 MPa.

Learn more about tensile strength here ;

https://brainly.com/question/30904383

#SPJ11

calculate the rotational kinetic energy of a 14 kg motorcycle wheel if its angular velocity is 120 rad/s and its inner radius is 0.280 m and outer radius 0.330 m.

Answers

The rotational kinetic energy of the motorcycle wheel is approximately 4994.16 Joules.

The rotational kinetic energy (KE) of an object can be calculated using the formula:

KE = (1/2) * I * ω^2

Where:

KE is the rotational kinetic energy

I is the moment of inertia

ω is the angular velocity

The moment of inertia (I) for a solid disk can be calculated using the formula:

I = (1/2) * m * (r_outer^2 + r_inner^2)

Where:

m is the mass of the object (motorcycle wheel)

r_outer is the outer radius of the wheel

r_inner is the inner radius of the wheel

Given data:

Mass of the motorcycle wheel (m) = 14 kg

Angular velocity (ω) = 120 rad/s

Inner radius (r_inner) = 0.280 m

Outer radius (r_outer) = 0.330 m

Using the above formulas, we can calculate the rotational kinetic energy as follows:

I = (1/2) * 14 kg * (0.330 m^2 + 0.280 m^2)

I ≈ 0.648 kg * m^2

KE = (1/2) * 0.648 kg * m^2 * (120 rad/s)^2

KE ≈ 4994.16 J

The rotational kinetic energy of the motorcycle wheel is approximately 4994.16 Joules.

To know more about rotational kinetic energy visit:

brainly.com/question/30459585

#SPJ11

an astronaut on another planet drops a 1-kg rock from rest and finds that it falls a vertical distance of 2.5 meters in one second. on this planet, the rock has a weight of

Answers

When a rock falls a vertical distance of 2.5 meters in one second. On this planet, the rock has a weight of 5 Newtons.

To determine the weight of the 1-kg rock on the given planet, we can use the formula:

Weight = mass * acceleration due to gravity

On Earth, the acceleration due to gravity is approximately[tex]9.8 m/s^2.[/tex]However, on different planets, the acceleration due to gravity can vary.

We can calculate the acceleration due to gravity on the planet using the kinematic equation:

[tex]s = ut + (1/2)at^2[/tex]

Rearranging the equation to solve for acceleration, we have:

[tex]a = 2s / t^2[/tex]

Substituting the given values:

[tex]a = 2 * 2.5 / 1^2 \\a = 5 m/s^2[/tex]

Now, we can calculate the weight of the rock on the planet using the formula:

Weight = mass * acceleration due to gravity

Since the mass of the rock is given as 1 kg, we have:

Weight =[tex]1 kg * 5 m/s^2[/tex]

Weight = 5 N

To know more about kinematic equation, here

brainly.com/question/24458315

#SPJ4

an object 1.50 cm high is held 3.00 cm from a person's cornea, and its reflected image is measured to be 0.167 cm high. what is the magnification?

Answers

An object 1.50 cm high is held 3.00 cm from a person's cornea, and its reflected image is measured to be 0.167 cm high the magnification of the optical system is approximately 0.111.

The ratio of the height of an image to the height of an object is defined as the magnification of a lens. Also, magnification is equal to the ratio of image distance to that of object distance. The formula is:

Magnification = Height of Image / Height of Object

Height of Object (h₁) = 1.50 cm

Height of Image (h₂) = 0.167 cm

Magnification (M) = h₂ / h₁

M = 0.167 cm / 1.50 cm

M ≈ 0.111

Therefore, the magnification of the optical system is approximately 0.111.

To know more about magnification here

https://brainly.com/question/21370207

#SPJ4

A system consists of a large number of identical molecules at equilibrium. Each molecule can be in one of a ladder of energy levels. As shown in the diagram below, the energy levels are uniformly spaced, and the difference in energy between adjacent energy levels is 1 kBT. Shown below are two instantaneous "snapshots" of the energies of three of the molecules, which are labeled 1, 2 and 3. (A) Assuming that the molecules are independent and the systems are at equilibrium (i.e., the Boltzmann distribution is valid), what is the probability of seeing molecule 1 in the 0 level relative to the probability of seeing molecule 3 in the 3 kBT energy level, as shown in A? (B) Assuming again that the molecules are independent and at equilibrium, what is the relative probability of seeing molecules 1, 2 and 3 simultaneously in the energy levels shown in A, versus the probability of seeing them simultaneously in the energy levels shown in B? That is, calculate: probability of situation A probability of situation B Show all the steps of your calculation.

Answers

a) the probability of seeing molecule 1 in the 0 level is 20.09 b) probability of seeing them simultaneously in the energy levels shown in B is  7.39

(A) Probability of molecule 1 in 0 level= P(E=0)

Probability of molecule 3 in 3

kBT= P(E=3 kBT)

The Boltzmann distribution probability of energy level E is:

 P(E) = (e^(-E/kB*T))/Z

Where, k= Boltzmann constant, T= temperature, and Z= partition function.

Probability of molecule 1 in 0 level

P(E=0) = (e^(-0))/(Σ(e^-E/kBT))

E=0k

BT = 1

P(E=0) = 1/Z

Where, Z = Σ(e^-E/kBT)

From the above-given diagram, it can be observed that the

probability of molecule 1 at level 0 is:

1/Z = (e^-0/kBT + e^-1/kBT + e^-2/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)

Probability of molecule 3 in 3 kBT level

P(E=3 kBT) = (e^(-3))/(Σ(e^-E/kBT))

E=3kBT

= 3kBT

kBT = 1

P(E=3 kBT) = e^-3/kBT/Z

Where,

Z = Σ(e^-E/kBT)

From the above-given diagram, it can be observed that the probability of molecule 3 at level 3kBT is:

e^-3/kBT/Z = (e^-3/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)

Thus, the probability of seeing molecule 1 in the 0 level relative to the probability of seeing molecule 3 in the 3 kBT energy level, as shown in A is:

(1/Z)/(e^-3/kBT/Z) = (e^3/kBT)

= 20.09

(B) That is, calculate: probability of situation A probability of situation B

For situation A:

of molecule 1 in 0 level=

P(E=0) = 1/Z = (e^-0/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)

Probability of molecule 2 in 1 kBT=

P(E=1 kBT) = e^-1/kBT/Z

= (e^-1/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)

Probability of molecule 3 in 3 kBT=

P(E=3 kBT) = e^-3/kBT/Z

P(E=3 kBT) = (e^-3/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)

Probability of situation

A = P(E=0) * P(E=1 kBT) * P(E=3 kBT)

= e^-4/kBT/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)^3

Similarly, for situation B,

Probability of situation

B = P(E=1 kBT) * P(E=2 kBT) * P(E=3 kBT)

= (e^-1/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT) * (e^-2/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT) * (e^-3/kBT)/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)

= e^-6/kBT/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)^3

Thus, the relative probability of seeing molecules 1, 2 and 3 simultaneously in the energy levels shown in A, versus the probability of seeing them simultaneously in the energy levels shown in B is:

(e^-4/kBT/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)^3)/(e^-6/kBT/(1 + e^-1/kBT + e^-2/kBT + e^-3/kBT)^3)

= e^2/kBT = 7.39

to know more about Boltzmann distribution visit:

https://brainly.com/question/15855516

#SPJ11

on a deep sea fishing trip, captain c-bo knows that each of his passengers will catch red snapper at a rate of 2 fish per hour.

Answers

Captain C-Bo takes his passengers on a deep-sea fishing trip where he expects them to catch red snappers at a rate of two fish per hour. Deep-sea fishing is done in areas of the ocean that are over 30 meters deep, where there are several types of fish, including red snapper.

The red snapper is a common catch in deep-sea fishing trips as it's a popular and delicious fish. It's found in deep waters from 30 feet to 200 feet in depth, typically near the bottom, and can weigh up to 40 pounds. Red snapper is a popular catch in deep-sea fishing, and because of its popularity, the fishing industry has developed specific rules and regulations to protect it and ensure it's sustainably fished.

In deep-sea fishing, the passengers use a fishing rod and bait to catch fish. The captain knows that each passenger will catch red snapper at a rate of two fish per hour. Thus, if there are 10 passengers on the boat, they would catch 20 fish per hour. If the trip lasts for four hours, each passenger will have caught eight fish. If the trip lasts for eight hours, each passenger will have caught 16 fish.

Thus, it's essential to understand the duration of the fishing trip to determine the catch. In conclusion, on a deep-sea fishing trip, passengers can expect to catch red snapper. If there are 10 passengers, they will catch 20 fish per hour, with each passenger catching two fish. The duration of the trip will determine the overall catch.

Learn more about fishing industry here ;

https://brainly.com/question/31561888

#SPJ11

A concave mirror has a focal length of 20 cm. What is the magnification if the object's distance is 100 cm? a) 1/2 b) 1/4 c) -2 d) 3 e) -1/4

Answers

A concave mirror has a focal length of 20 cm. So, B) [tex]= \frac{1}{4}[/tex] is closest to the mark. The proper magnification, however, is [tex]= \frac{1}{5}[/tex] , which is not offered in the available options.

To find the magnification of a concave mirror, we can use the formula:

magnification (m) = - (image distance / object distance)

Given:

Focal length (f) = -20 cm (negative because the mirror is concave)

Object distance (u) = 100 cm

Using the mirror formula:

[tex]\frac{1}{f} = \frac{1}{v} - \frac{1}{u}[/tex]

Substituting the values:

[tex]\frac{1}{-20} = \frac{1}{v} - \frac{1}{100}[/tex]

Simplifying:

[tex]\[-\frac{1}{20} = \frac{1}{v} - \frac{1}{100}\][/tex]

To solve for v, we can find the common denominator and simplify the equation:

[tex]\[-\frac{5}{100} = \frac{1}{v}\][/tex]

Simplifying further:

[tex]\[-\frac{1}{20} = \frac{1}{v}\][/tex]

Cross-multiplying:

v = -20 cm

The negative sign indicates that the image is virtual and located on the same side as the object.

Now, we can calculate the magnification (m):

[tex]\[m = -\frac{v}{u} \\[/tex]

[tex]-\frac{-20}{100}[/tex]

[tex]= \frac{20}{100}[/tex]

[tex]= \frac{1}{5}[/tex]

Therefore, the magnification is [tex]= \frac{1}{5}[/tex].

Among the given options, the closest one is b) [tex]= \frac{1}{4}[/tex]. However, the correct magnification is[tex]= \frac{1}{5}[/tex], which is not provided in the given choices.

To know more about the magnification refer here :

https://brainly.com/question/12966853#

#SPJ11

as the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will _____.

Answers

The speed of a wave in a uniform medium is directly proportional to the wavelength of the wave when the tension remains the same. If the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will decrease.

This is due to the fact that as the wavelength of a wave increases, the distance between successive crests or troughs of the wave also increases. Therefore, it will take more time for the wave to travel from one point to another, resulting in a decrease in the speed of the wave.

This can be explained using the wave equation v = fλ, where v is the speed of the wave, f is the frequency of the wave, and λ is the wavelength of the wave. Since the frequency of the wave remains constant in this case, an increase in wavelength results in a decrease in the speed of the wave.

This phenomenon can be observed in various types of waves, including sound waves, water waves, and electromagnetic waves, which all obey the same wave equation.

In summary, if the wavelength of a wave in a uniform medium increases while the tension stays the same, its speed will decrease.

Learn more about sound waves here ;

https://brainly.com/question/1554319

#SPJ11

a beam of light enter from air (nair=1.00) to glass ( nglass=1.50) at an angle of 48o relative to the normal of the glass surface. determine the angle of refraction.

Answers

A beam of light enter from air (nair=1.00) to glass ( nglass=1.50) at an angle of 48o relative to the normal of the glass surface the angle of refraction is approximately 31.09°.

The formula for the angle of refraction is given by Snell’s law, which states that n1 sin θ1 = n2 sin θ2, where n1 is the refractive index of the first medium, θ1 is the angle of incidence, n2 is the refractive index of the second medium, and θ2 is the angle of refraction.

The angle of refraction is given as follows:

θ2 = sin-1 [(n1 sin θ1)/n2]

Given:n1 (air) = 1.00n2 (glass) = 1.50θ1 = 48°

We know that the angle of refraction is given by:

θ2 = sin-1 [(n1 sin θ1)/n2]

Substituting the given values, we get:

θ2 = sin-1 [(1.00 sin 48°)/1.50]

Evaluating the above expression, we get:θ2 ≈ 31.09°Therefore, the angle of refraction is approximately 31.09°.

To know more about refraction refer to:

https://brainly.com/question/27932095

#SPJ11

(a) what is the intensity in w/m2 of a laser beam used to burn away cancerous tissue that, when 90.0 bsorbed, puts 363 j of energy into a circular spot 3.60 mm in diameter in 4.00 s?

Answers

The intensity of the laser beam used to burn away cancerous tissue is 2.00 × 10⁹ W/m².

Given data:

The time interval, t = 4.00 s

The diameter of circular spot, d = 3.60 mm

Radius of the circular spot, r = d/2 = 1.80 mm = 1.80 × 10⁻³ m

Energy of the laser beam, E = 363 J

Absorption coefficient, α = 0.90

Intensity of the laser beam is given as, P = E/At,

where A is the area of the circular spot, A = πr²

Therefore, P = E/πr²t

Substituting the given values, we have;

Intensity, P = (363 J) / [π (1.80 × 10⁻³ m)² × 4.00 s]

Intensity of laser beam is given as, P = 2.00 × 10⁹ W/m².

The power transferred per unit area is known as the intensity or flux of radiant energy, where the area is measured on a plane perpendicular to the direction of the energy's propagation. Watts per square metre (W/m2) and kilograms per square meter (kg/s3) are the units used in the SI system.

With waves like acoustic waves (sound) or electromagnetic waves like light or radio waves, intensity is most usually employed to describe the average power transfer across one period of the wave.

Know more about intensity here:

https://brainly.com/question/14085431

#SPJ11

using your knowledge of energy conservation, express qqq in terms of δuδudeltau and www .

Answers

The heat transferred (qqq) can be expressed as qqq = δu - www, where δu represents the change in internal energy and www represents the work done.

In the context of energy conservation, the change in the total energy of a system is equal to the sum of the work done on the system and the heat transferred into or out of the system. This can be expressed mathematically as:

ΔE = qqq + www,

where ΔE represents the change in total energy, qqq represents the heat transferred, and www represents the work done.

If we isolate qqq in the equation, we have:

qqq = ΔE - www.

Since the question asks us to express qqq in terms of δu (change in internal energy) and www (work done), we can substitute ΔE with δu, as internal energy (u) is a component of the total energy:

qqq = δu - www.

This equation represents the heat transferred (qqq) in terms of the change in internal energy (δu) and the work done (www).

The heat transferred (qqq) can be expressed as qqq = δu - www, where δu represents the change in internal energy and www represents the work done.

To know more about heat visit:

https://brainly.com/question/934320

#SPJ11

a solution of naf is added dropwise to a solution that is 0.0144 m in ba2 . when the concentration of f- exceeds __?__ m, baf2 will precipitate. neglect volume changes. for baf2, ksp = 1.7x10-6.

Answers

BaF₂ will precipitate when the concentration of F⁻ exceeds 3.46 × 10⁻³ M. This is determined by the solubility product constant (Ksp) of BaF₂, which is 1.7 × 10⁻⁶. If the concentration of F⁻ exceeds this threshold, the excess ions will form a solid precipitate.

Determine how will find the precipitate?

The solubility product constant (Ksp) for BaF₂ is given as 1.7 × 10⁻⁶. When a sparingly soluble salt like BaF₂ is in equilibrium with its ions in a solution, the product of the concentrations of the ions raised to their stoichiometric coefficients is equal to the solubility product constant.

The balanced equation for the dissociation of BaF₂ is:

BaF₂ ⇌ Ba²⁺ + 2F⁻

At equilibrium, let x be the concentration of F⁻ ions in M. The concentration of Ba²⁺ ions will be 0.0144 M (given).

Using the stoichiometric coefficients, the equilibrium expression for the solubility product constant can be written as:

Ksp = [Ba²⁺][F⁻]²

Substituting the known values:

1.7 × 10⁻⁶ = (0.0144)(x)²

Solving for x:

x = √(1.7 × 10⁻⁶ / 0.0144) ≈ 3.46 × 10⁻³ M

Therefore, when the concentration of F⁻ exceeds 3.46 × 10⁻³ M, BaF₂ will precipitate.

To know more about solubility, refer here:

https://brainly.com/question/28170449#

#SPJ4

a wire 35.0 cm long, carrying a current of 3.50 a is placed at an angle of 40 degrees in a uniform magnetic field of 0.002 t. find the force on teh wire

Answers

A current-carrying wire in a magnetic field is subjected to a magnetic force. The direction of this force is perpendicular to both the direction of the current and the direction of the magnetic field. The force on the wire is 0.000728 N. This force is in a direction perpendicular to both the wire and the magnetic field.

In this problem, the wire is at an angle of 40 degrees to the magnetic field, but the force is still perpendicular to both the wire and the field. The force on the wire can be calculated using the following formula: F = BILsinθwhere F is the force on the wire, B is the magnetic field, I is the current, L is the length of the wire, and θ is the angle between the wire and the magnetic field. In this case: F = (0.002 T)(3.50 A)(0.35 m)sin(40°) = 0.000728 N

to  know more about magnetic field visit:

https://brainly.com/question/19542022

#SPJ11

a 15.50 gram ice cube at 0.00c is left out on the counter. after a couple of hours, it absorbs 6,667 joules of heat. what is the final temperature of the water remaining?

Answers

To determine the final temperature of the water remaining after the ice cube absorbs 6,667 joules of heat, we need to consider the specific heat capacity of ice and water. The specific heat capacity of ice is 2.09 J/g°C, and the specific heat capacity of water is 4.18 J/g°C.

First, we need to calculate the heat required to raise the temperature of the ice cube from 0.00°C to its melting point, which is 0.00°C. Heat absorbed by ice = mass of ice × specific heat capacity of ice × change in temperature = 15.50 g × 2.09 J/g°C × (0.00°C - 0.00°C) = 0 joules. Since the heat absorbed is 0 joules, the ice cube does not experience any temperature change during this phase. Next, we need to calculate the heat required to melt the ice cube completely. The heat of fusion for ice is 334 J/g. Heat absorbed to melt ice = mass of ice × heat of fusion = 15.50 g × 334 J/g = 5177 joules After melting, the resulting water has a mass of 15.50 g. Finally, we need to calculate the temperature change of the water when it absorbs the remaining heat of 6,667 joules. Heat absorbed by water = mass of water × specific heat capacity of water × change in temperature = 15.50 g × 4.18 J/g°C × change in temperature. Since we know that the total heat absorbed is 6,667 joules, we can set up the equation: 6,667 joules = 15.50 g × 4.18 J/g°C × change in temperature. Solving for change in temperature: change in temperature = (6,667 joules) / (15.50 g × 4.18 J/g°C) Once you calculate the change in temperature, you can add it to the initial temperature of 0.00°C to find the final temperature of the water remaining.

To learn more about temperature, https://brainly.com/question/2264209

#SPJ11

if two firecrackers produce a combined sound level of 85 db when fired simultaneously at a certain place, what will be the sound level if only one is exploded? [hint: add intensities, not dbs.]

Answers

If two firecrackers produce a combined sound level of 85 dB when fired simultaneously, the sound level when only one firecracker is exploded will be approximately 82 dB.

The sound level in decibels (dB) is a logarithmic scale that measures the intensity of sound relative to a reference level. When two sound sources are combined, their intensities are summed, not their dB values.

To calculate the combined sound level when two firecrackers are fired simultaneously, we can use the following formula:

L_combined = 10 * log10(I1 + I2)

where L_combined is the combined sound level in dB, I1 and I2 are the intensities of the two firecrackers.

Given that the combined sound level is 85 dB, we can rearrange the formula to solve for the combined intensity (I1 + I2):

I1 + I2 = 10^(L_combined / 10)

Now, to find the sound level when only one firecracker is exploded, we can use the formula:

L_single = 10 * log10(I_single)

where L_single is the sound level in dB when one firecracker is exploded, and I_single is the intensity of the single firecracker.

Since the intensity of the single firecracker is half of the combined intensity (assuming the firecrackers have equal intensities), we can substitute I_single = (I1 + I2) / 2 into the formula to calculate L_single:

L_single = 10 * log10((I1 + I2) / 2)

Substituting the calculated value of I1 + I2 from the earlier step, we can find the sound level when only one firecracker is exploded.

If two firecrackers produce a combined sound level of 85 dB when fired simultaneously, the sound level when only one firecracker is exploded will be approximately 82 dB. This is based on the assumption that the firecrackers have equal intensities.

To know more about Sound Level, visit

https://brainly.com/question/31594862

#SPJ11

Other Questions
she is writing a letter change into passive voicee!!! You can customize a report and even change the design of it. True False Analyze the system flowchart below and describe in detail theprocesses that are occurring. Your company has purchased a new piece of equipment for $1,000,000 and the equipment has a useful life of 5 years and uses the straight-line method of depreciation. It is estimated that labor costs and maintenance costs will be reduced by $500,000 per year for the next 5 years. Your company has a hurdle rate of 10%.Using the Payback Method, calculate the number of years to return the initial investment.A) Two yearsB) One earC) Five yearsD) Three years power bi is a popular data visualization tool as data doesn't need to be sourced True or False. is *Crop plants are sometimes grown in areas where weedy relatives also live.*Simple sentencce Compound sentence Complex sentence Fragment Run on sentence WILL GIVE BRAINLIEST IF CORRECT AND 66 POINTSA small creek runs through a mature forest, keeping the soil around the creek damp all year. A variety of ferns and several flowering plants thrive in this shady, moist area. Along the higher ground above the creek, many species of flowering plants that need less water grow. If a farmer diverted the creek to water his fields, causing the creek to dry up, what would be the most likely long-term consequence for the ferns and angiosperms in the forest? The ferns would outcompete the angiosperms in the forest since they can tolerate a wider range of moisture conditions than angiosperms. The angiosperms and the ferns would not be affected since their thick, waxy cuticle coverings would protect them from drying out. The angiosperms would outcompete the ferns since their sperm do not need moist conditions to get to their eggs as ferns do. The ferns and angiosperms would begin to produce spores instead of seeds since the spores are better able to survive dry conditions. What challenges do economies face in light of optimalallocation and public goods? Need this answer as soon as possible Please help !!!!!!!!!!! help plzzzz!!!!!!!!! . Amy Company sold merchandise of $8,000 to Tory Turnbull with terms 2/10, n/30. Amy Company recorded this transaction using the gross method. If Tory Turnbull paid for all the merchandize within the discount period, the journal entry that Amy Company will make to record the collection of cash would include a: a. Credit to Sales Discount of $160 b. Credit to Account receivable $7,840 c. Debit to Sales Discount of $160 d. Credit to Cash of $160 Select- Research from the University of Arizona shows that sales goals can cause tunnel vision, leading people to make unethical choices to achieve their targets. How being a sales- head, you can avoid/stop this behavior? Pls help Ill pay u 30$ if its right In an experiment a bag contains 2 blue marbles and 5 red marbles. Two marbles are drawn from the bag. A machine that is programmed to package 1.20 pounds of cereal is being tested for its accuracy In a sample of 36 cereal boxes, the sample mean filling weight is calculated as 1.22 pounds. The population standard deviation is known to be 0.06 pound. Identify the relevant parameter of interest for these quantitative data. The parameter of interest is the proportion filling weight for all cereal packages. The parameter of interest is the average filling weight for all cereal packages.A-1. Identify the relevant parameter of interest for these quantitative data. A) The parameter of interest is the average filling weight of all cereal packages. B) The parameter of interest is the proportion filling weight of all cereal packages. A-2. Compute its point estimate as well as the margin of error with 95% confidence. (Round intermediate calculations to 4 decimal places.B-1. Calculate the 95% confidence interval. B-2. Can we conclude that the packaging machine is operating improperly? A) Yes, since the confidence interval contains the target filling weight of 1.20. B) Yes, since the confidence interval does not contain the target filling weight of 1.20. C) No, since the confidence interval contains the target filling weight of 1.20. D) No, since the confidence interval does not contain the target filling weight of 1.20. C. How large a sample must we take if we want the margin of error to be at most 0.01 pound with 95% confidence? Siphos brother is an actor. My father and I ________ love to cook. (1 point) In cell B23, find the required sample size to estimate the true proportion of satisfied customers within 3% margin of error, with 99% confidence. in excel?? Can someone please help me with these