Answer:
5.60 m/s
Explanation:
His initial potential energy is equal to his final kinetic energy.
mgh = 1/2mv^2
2gh = v^2 . . . . . . . multiply by 2/m
v = √(2gh) = √(2(9.81 m/s²)(1.6 m)) = √(31.392 m²/s²)
v ≈ 5.60 m/s
_____
Additional comment
The mass is irrelevant in the equations we typically use for this purpose.
Which statement best explains the environmental drawback of using geothermal energy over energy generated by fossil fuels?
More cost-effective over time
Less pollution than fossil fuel plants
More energy plant locations available
Changes to regional landscapes
Answer:
Die Antwort lautet: Weniger Umweltverschmutzung als Kraftwerke mit fossilen Brennstoffen
Explanation:
hoffe das hat geholfen!! :))
Answer:
Changes to regional landscapes
Explanation:
It would be D because this is a cost or drawback and geothermal energy production would cause changes to the landscape, unlike how fossil fuels would. I also got this right on the quiz.
Hope this helps!
Explain why pumice floats and why ironwood sinks
Answer:
A quick way of describing density is to describe an object as heavy or light for its size. Pumice stone, unlike regular rock, does not sink in water because it has a low density. An ironwood branch is very dense and sinks in water.
Hope that helps. x
Answer:
Pumice is trapped in gas when the temperature is warm, but as the temp drops, it becomes dense, due to air bubbles. Iron wood is denser than water, thus making it sink.
Explanation:
if a ball with a mass of 5.0 kg has a momentum of 50.0 kg•m/s, what is its velocity?
Answer:
[tex]momentum =mv \\ 50 = 5v \\ v = \frac{50}{5} \\ v= 10m. {s}^{ - 1} [/tex]
The frequency of a wave is 4hz. If the wavelength is 2m how fast is the water moving?
I need the Formula,Known,Substitute & Solve Answer with Units
Answer:
This is the answer that I got
Explanation:
Hope it is right.
Marianne and her family are driving from West Virginia to California. While driving through the Rocky Mountains, they encounter a rock slide. A huge boulder, a few smaller rocks and several tree branches block the road. Her father creates a lever using a long tree branch and a small rock to help move the boulder. Look at the diagram below. Where should Marianne’s father place the small rock?
Question 6 options:
It makes no difference where he places the rock
He should place the rock (fulcrum) close to the boulder (at Point A).
He should place the rock (fulcrum) away from the boulder (at Point B).
He should place the rock (fulcrum) near the end of the branch (at Point C).
Answer:
Point A
Explanation:
Point C is way to close to where the force would need to be.
Point B is close but not as close, the reasonable answer would be point A.
Marianne’s father should place the small rock: he should place the rock (fulcrum) close to the boulder (at Point A).
What is simple lever?The simplest devices, like levers, are employed to complete tasks quickly. Leverage is the ability to increase an input force to produce a stronger output force. We are known that there are different kinds of levers depending on the force, weight, and fulcrum point. Each tool that is used to complete a task falls into one of these categories.
One of the six simple devices that Renaissance scientists identified. Leverage is the ability to increase an input force to produce a stronger output force. The mechanical advantage of the lever is determined by the ratio of output force to input force.
Learn more about lever here:
https://brainly.com/question/18128414
#SPJ2
Which of the following industries is the largest producer of primary air pollutants in the United States?
The largest producer of primary air pollution in the United States is what? electricity producing plants.
Answer:
electricity production
Explanation:
A car travels 80 km at an avarage speed of 40 km/h. It travels the remaining distance in 3h. What is its dis placement if the average speed of the car is 30 km/h.? And explain
A) 100 km
B)120 km
C)150km
D)180km
When traveling with average speed 40 km/h, the car would cover a distance of 80 km in time t such that
40 km/h = (80 km) / t ⇒ t = 2 h
so the total travel time is 2 h + 3 h = 5 h.
Average speed is defined as the total distance traveled divided by the time it took to cover that distance. So if the overall average speed was 30 km/h, then
30 km/h = (80 km + x) / (5 h) ⇒ x = 70 km
where x is the distance traveled in the last 3 h of the trip.
Then the total displacement of the car is 80 km + 70 km = 150 km.
Help it’s multiple choice 11 through 15 please!
1. • Here, force of gravity on the block = 20 N.
• Therefore, the normal force will also be the same, i.e., 20 N [According to Newton's Third Law, on every action, there is an equal and opposite reaction]
• The coefficient
[tex] u_{k} = 0.4[/tex]
• Force of friction =
[tex]u_{k} \times \: normal \: \: \: force \\ = 0.4 \times 20N \\ = 8N[/tex]
• Hence, the force of sliding friction between the block and the ground is 8 N.
• So, it is option c. 8 N
2. The answer is option d. continue in the same direction with no change in speed.
We know, force = mass × acceleration. When force is 0, then acceleration will also be 0 since mass cannot be 0. So, there will be no change in speed.
3. It is option b. force that is required to give a one kilogram object the acceleration of 1 m/s^2.
Newton is the SI unit of force. As mentioned earlier, force = mass × acceleration. The SI unit of mass and acceleration is Kg and m/s^2 respectively.
So, 1 N = 1 Kg × 1 m/s^2.
4. It is d. not zero.
Acceleration is the change in speed. So, if the force is zero, then acceleration will not occur.
5. Force = 2 N
Acceleration of the object A = 2 m/s^2.
Acceleration of the object B = 1 m/s^2.
Therefore, mass of the object A = 2 N ÷ 2 m/s^2 = 1 Kg
And, mass of the object B = 2 N ÷ 1 m/s^2 = 2 Kg
So, the mass of object B is greater than that of object A.
Hence, the answer is option c. Object B has more mass.
Hope you could get an idea from here.
Doubt clarification - use comment section.
tree sloths are the slowest mammals on earth an typical tree sloth moves with maximum speed of 0.075 m/s. how long would it take a sloth moving at this speed to travel 2.0m
The time taken for the tree sloths to travel the given distance is 26.31 s.
The given parameters:Maximum speed of the tree sloths, v = 0.075 m/sDistance traveled by the tree sloths, d = 2.0 m
The time taken for the tree sloths to travel the given distance is calculated as follows;
distance = speed x time
[tex]time = \frac{distance }{speed} \\\\time = \frac{2.0}{0.075} \\\\time = 26.31 \ s[/tex]
Thus, the time taken for the tree sloths to travel the given distance is 26.31 s.
Learn more about speed and time here: https://brainly.com/question/25271752
a q deben los cambios de la materia??
Answer:
wat
Explanation:
Which is true for the motion of the car during its journey along OAB?
12)
A) The velocity of the car remains constant throughout the journey.
B) The change in speed alone causes the velocity of the car to vary.
C) The change in direction alone causes the velocity of the car to vary.
D) The velocity of the car changes due to the change in speed and dir
Answer:
D
Explanation:
A is wrong as the direction of the car changes, implying velocity is changing and not constant.
B and C are wrong as both the change in speed and direction contribute to the change in velocity
A race car makes one lap around a track of radius 180 m in 90.0 s. What is the centripetal acceleration in m/s2?
a
0.5
12.6
Ob
OC
Od
.87
2.
2
Answer:
0.9m/s^2 (yours is 0.87, so choose that)
Explanation:
formula for centripetal acceleration:
v^2/r
to find v, we know that f=1/90s, and r=180m.
v=(2pir)/T
v=(2pi(180))/90
v=12.6m/s
now plug into a=v^2/r
a=(12.6)^2/180
a=0.9m/s^2
two forces act concurrently on an object on a horizontal frictionless surface. their resultatn force has the largest magnitude when the angle between the forces is
Answer:
54
Explanation:4
4
4
Answer:
30d
Explanation:
30d
Can someone please give me the (Answers) to this? ... please ...
Answer:
Jake’s horse will only need to exert enough force to make the carriage accelerate. Even though the carriage will pull on the horse as well, that force is not enough to make the horse accelerate in the direction of the carriage because it is only strong enough to make the carriage accelerate, not the horse.
Explanation:
Additional info: the horse has more mass than the carriage does so it would require a stronger force to make the horse accelerate.
Answer: Jake’s horse will only need to exert enough force to make the carriage accelerate .Since the horse has a greater mass than the carriage, it requires a stronger force to make the horse accelerate.
Explanation: Sorry it took so long lol
A car takes off from rest takes of from rest and covers a distance of 80m on a straight road in 10s.Calculate the magnitude of its acceleration.
Answer:
The magnitude of its acceleration is 1.6 m/s^2.
Hope you could get an idea from here.
Doubt clarification - use comment section.
What will happen if the two plungers are pressed together firmly? Explain your answer.
Answer:
This air being forced out causing the air pressure inside to be much lower than that on the outside. As higher air pressure always pushes, it keeps the two plungers together.
Hope that helps. x
What does 'has no fixed volume' mean??
Answer:
the volume changes overtime
sometimes because of weather, temperature ...
Explanation:
A car has a kinetic energy of 41.6 kJ.
The speed of the car is 8.0m/s.
Calculate the mass of the car.
Question:
The US Navy is developing a railgun that uses magnetic field repulsion. The railgun can propel a 981 N projectile at seven times the speed of sound. How much energy is stored in this magnetic field? Assume a complete conversion of energy and a speed of sound of 340 m/s.
Answer choices:
A. 119 MJ
B. 283 MJ
C. 578 MJ
D. 2780 MJ
The relation of the kinetic energy allows to find the correct result for the energy stored in the electromagnet is:
B) 283 MJ
Kinetic energy is the energy due to the movement of bodies.
K = ½ m v²
Where K is the kinetic energy, m is the mass and v the spped.
They indicate that the weight of the bodye is W = 981 N and its final velocity is v = 7 [tex]v_s[/tex].
W = m g
Since the projectile starts from rest, its initial velocity is zero, therefore the change in energy is
ΔK = [tex]K_f - K_o = K_f[/tex]
we substitute
ΔK = ½ 981 / 9.8 (7 340) ²
ΔK = 2.835 10⁸ J
They indicate that all the energy of the electromagnet is transformed into the energy of the projectile,
Em = K
When reviewing the results, the correct one is:
B) 283 MJ
In conclusion, using the relationship of kinetic energy we can find the correct result for the energy stored in the electromagnet is:
B) 283 MJ
learn more about kinetic energy here: brainly.com/question/8101588
Which impact would be more forceful, decreasing speed from 60mph to 0 mph over 2 seconds or 0.5 seconds? Explain
REAL ANSWERS ONLY HELP
A ball is kicked at 25.0 degrees with respect to the ground with an initial velocity of 15.0 m/s. Calculate the horizontal and vertical components of the velocity.
Answer:
h = v 0 y 2 2 g . This equation defines the maximum height of a projectile above its launch position and it depends only on the vertical component of the initial velocity.
Explanation:
if the spring balance with the iron ball is relaesed what reading will the spring balance record and wht
Answer:
when it is released the reading will be zero because gravitational force acts on it you can also say as free fall body
Explanation:
A wave has frequency of 5 Hz and a speed of 25 m/s. What is the wavelength of the wave?
I need the Formula,Known,Substitute & Solve Answer with Units
Answer:
This is the answer that I got.
Explanation:
Just check over it once.
what are the main component of network
Answer:
A network has 5 basic components viz. clients, servers, channels, interface devices and operating systems.
why can you predict how the moon will change appearance from day to day
As the Moon orbits our planet, its varying position means that the Sun lights up different regions, creating the illusion that the Moon is changing shape over time. This is because it rotates once on its axis in exactly the same time it takes to orbit Earth – 27 days and seven hours
A 6 kilogram block in outer space is moving at -100 m/s (to the left). It suddenly experiences three forces as shown below.
B) What equilibrant force is required to keep the block at rest once it does?
C) If you were to rearrange the three forces as you like, what maximum force could be applied to slow the block?
D) How much time would it take for the block to stop under maximum force conditions?
Newton's second law and the kinematic relations allow to find the results for the questions about forces and the movement of the block are:
B) the force applied to maintain the system is equilibrium is: F = 0.39 N with an angle of tea = 180º
C) The maximum force is: F = 24 N
D) The time to stop the block is: t = 25 s
Newton's second law establishes a relationship between the net force, the mass, and the acceleration of the body. In the special case that the acceleration is zero it is called the equilibrium condition.
B) They indicate a diagram of forces on the block, let's look for the components of the force that the block maintains with zero acceleration, in the attached we have a free-body diagram including the force applied to keep the system in equilibrium.
x-axis
-10 + 12 sin 60 + Fₓ = 0
Fₓ = 10- 12 sin 60 = -0.39 N
y-axis
12 cos 60 - 6 + F_y = 0
F_y = 6 - 12 cos 60 = 0 N
We can give the result of the force in two ways:
Form of coordinates F = -0.39 i ^ N Form of module and angle.
Let's use Pythagoras' theorem to find the modulus.
[tex]F = \sqrt{F_x^2 + F_y^2 } \\F = \sqrt{0.39^2 +0^2}[/tex]
F = 0.39N
We use trigonometry for the angle.
[tex]tan \theta = \frac{F_y}{F_x}[/tex]
tan θ= 0º
The component of the force is negative therefore this angle is in the second quadrant, to measure the angle from the positive side of the x axis in a counterclockwise direction.
θ = 180 + θ'
θ = 180 + 0
θ = 180º
C) if the three forces can be moved and the maximum force occurs when they are all linear.
10+ 6 + 6 + F = 0
F = -24 N
D) if we maintain this force and eliminate the other three, the block stops, let's look for its acceleration.
[tex]a = \frac{F}{m}[/tex]
a = [tex]\frac{24}{6}[/tex]
a = 4 m / s²
The acceleration is in the opposite direction of the initial velocity of the block v₀ = -100 m / s
If we use kinematic relations.
v = v₀ - a t
Final velocity when stopped is zero
t = [tex]\frac{0-v_o}{a}[/tex]
t = 100/4
t = 25 s
In conclusion using Newton's second law and the kinematics relations we can find the results for the questions about the forces and the motion of the block are:
B) the force applied to maintain the system is equilibrium is: F = 0.39 N with an angle of tea = 180º
C) The maximum force is: F = 24 N
D) The time to stop the block is: t = 25 s
Learn more about Newton's second law here: brainly.com/question/25545050
All satellite eventually lose their orbital energy and plummet to earth because of______.
Answer:
gravity
Explanation:
Even when satellites are thousands of miles away, Earth's gravity still tugs on them. Gravity—combined with the satellite's momentum from its launch into space—cause the satellite to go into orbit above Earth, instead of falling back down to the ground.
Line segment Q R , Line segment R S and Line segment S Q are midsegments of Î"WXY. Triangle R Q S is inside triangle X Y W. Point R is the midpoint of side X Y, point S is the midpoint of side Y W, and point Q is the midpoint of side X W. The length of Q R is 2. 93 centimeters, the length of R S is 2. 04 centimeters, and the length of Q S is 2. 28 centimeters. What is the perimeter of Î"WXY? 11. 57 cm 12. 22 cm 12. 46 cm 14. 50 cm.
The perimeter of ΔWXY is : ( D ) 14.5 cm
Calculating the perimeter of ΔWXY
QR = WY / 2
RS = XW / 2
QS = XY / 2
Given that : QR = 2.93 cm , RS = 2.04 cm, QS = 2.28 cm
Therefore
Perimeter of ΔWXY = ∑ WY + XW + XY
= 2SR + 2QS + 2QR
= 2(2.04) + 2(2.28) + 2(2.93)
= 14.5 cm
Hence we can conclude that the perimeter of ΔWXY = 14.5 cm
learn more about perimeter calculations : https://brainly.com/question/24744445
Answer:
The name of the shape on the right is M prime N prime O prime P prime Q prime R prime S prime because it is the image of the shape on the left.
Explanation:
can someone explain please?
Hi there!
We can begin by solving for the velocity in which the ball was thrown at using the following:
[tex]v_f^2 = v_i^2 + 2ad[/tex]
At the top of the trajectory, the ball's velocity is equal to 0 m/s, so:
[tex]0 = v_i^2 + 2ad\\\\vi^2 = 2ad \\\\[/tex]
'a' = acceleration due to gravity and 'd' is the max height, so:
[tex]v_i^2 = 2(10)(5)\\\\v_i^2 = 10 m/s[/tex]
Now, we can use the same equation to calculate the final speed at 4.5 m. Remember, the acceleration is NEGATIVE in this instance (taking the negative direction to be in the direction of gravity).
[tex]v_f^2 = 10^2 - 2(10)(4.5)[/tex]
[tex]v_f^2 = 10^2 - 2(10)(4.5)\\\\v_f^2 = 100 - 90 \\\\v_f^2 = 10 \\\\v_f = \boxed{3.1 m/s}[/tex]
what is the magnitude of the force exerted on the bottom of the bottle?