He exert 2.65 × [tex]10^{4}[/tex] N/m2 pressure on the ground if he stands on one leg.
What is pressure ?Pressure refers to as the physical force exerted on an object. The applied force is perpendicular to the surface of the object per unit area. The standard formula for pressure is F/A (force per unit area). The unit of pressure is called Pascal (Pa). Pressure types include absolute, atmospheric, differential, and gauge.Pressure is usually measured in units of force per unit area (P = F/A). In physics, the symbol for pressure is p and the SI unit for measuring pressure is pascal. Pascal is the force of 1 Newton per square meter acting perpendicular to a surface. This is a key concept in fluid mechanics and is used in the ideal gas law to describe the energy of gases and many other situations.To learn more about pressure from the given link :
https://brainly.com/question/12971272
#SPJ4
a movie stunt driver on a motorcycle drives off a 47.7-m tall cliff, in a horizontal direction. how fast is the motorcycle going at an instant that it leaves the cliff, if it lands on level ground below, 62.9 meters from the base of the cliff? answer to one decimal place.
Fast V=13.6 m/s is the motorcycle going at an instant that it leaves the cliff, if it lands on level ground below, 62.9 meters from the base of the cliff in projectile motion.
v=?
V1=0
a1=0
a2=-g
d1=47.7
d2=62
62=o*T-1/2gT²
T=3.5sec
47.7=vT
47.7=v*3.5
v=13.6 m/s
A projectile motion is a type of motion that an object or particle experiences when it is launched into a Gravity , such as from the surface of the Earth, and moves along a curved path only under the influence of gravity. The motion of an object being projected or thrown into the air is known as projectile motion, and it is only affected by the acceleration of gravity. Projectile and trajectory both refer to the same thing: an object. Any object that is launched into space and has only gravity acting on it is considered a projectile. Gravity is the main force at work when a projectile is launched. A projectile is an object that is launched or projected into the air and is only subject to the acceleration of gravity. Projectile and trajectory both refer to the same thing: an object.
Learn more about projectile motion here:
https://brainly.com/question/11049671
#SPJ4
Describe how the capacitance of a parallel plate capacitor changes with the geometry of the capacitor.
A parallel capacitor's geometrical characteristics determine its capacitance. the separation of the plates. The capacitance reduces as the distance between the plates grows.
What are capacitance and its measure?Farad, denoted by the letter F, is the SI unit for electrical capacitance. In large part, the unit bears the name of English physicist Micheal Faraday. The capacity of a body or thing to hold an electrical charge is often referred to as farad. The SI base units used to describe it are s4A2m-2kg-1.
Exactly why are the capacitance used?They are effective at lessening voltage pulsation. The capacitor is charged in a parallel circuit when a positive voltage is applied, and it discharges when a low voltage is applied. While most electronic circuits use DC, the electricity that comes out is AC.
To know more about capacitance visit:
https://brainly.com/question/14746225
#SPJ4
Help me, please!!!!!!!!
If another object (a can of beans) was dropped from 12 meters in free fall, how long will it take for that object to fall to the ground?
It will take the object a total time of 1.564 seconds to fall from a height of 12m.
What is time?Time is the apparent progression of events from past to future.
To calculate the time it takes the object to fall to the ground, we use the formula below.
Formula:
H = ut+gt²/2Where:
H ⇒ Heightt ⇒ Timeu ⇒ Initial velocityg ⇒ Acceleration due to gravityFrom the question,
Given:
H = 12 mu = 0 (drop from a height)g = Constant = 9.8 m/s²Substitute these values into equation 1
12 = (0×t)+(9.8t²/2)Solve for the value of t
t² = (12×2)/9.8t = √(24/9.8)t = 1.564 secondsHence, it will take the object 1.564 seconds to fall to the ground.
Learn more about time here: https://brainly.com/question/25800303
#SPJ1
A car of mass 1000 kg travelling at 8.0 m / s collides with a lorry of mass 3000 kg that is travelling at 2.0 m / s in the same direction. After colliding, the two vehicles stick together. What is their speed after the collision? A 2.0 m / s B 2.5 m / s C 3.5 m / s D 5.0 m / s
3.5 m / s is their speed after the collision.
Mass of a car = 1000 kg,
Velocity car = 8 m/s,
Mass lorry = 3000 kg,
Velocity lorry = 2 m/s.
u = initial velocity,
v = final velocity.
m₁ = 1000 kg, m₂ = 3000 kg, u₁ = 8 m/s, u₂ = 2 m/s
(1000)(8) + (3000)(2) = (1000 + 3000)·v
8000 + 6000 = 4000·v
4000·v = 14000
v = 3.5 m/s
velocity (often abbreviated as "s") is a scalar variable that describes how lots an item's vicinity modifications over time or how plenty it modifications in step with unit of time.
The average speed of an item in a period of time is the distance traveled with the aid of the object divided by way of the length of the length.
Time divided with the aid of distance are the rate-associated metrics.. The meter in keeping with second (m/s) is the SI unit of pace, while the kilometer consistent with hour (kph) is the most usually used unit of speed in each day existence.
To know more about speed visit : brainly.com/question/93357
#SPJ9
a 0:20 cm radius cylinder, 3:0 cm long, is wrapped with wire to form an inductor. at the instant the magnetic field in the interior is 5:0 mt, the energy stored in the field is about:
The energy stored in the field is 3.75*10-6J.
What is magnetic field?
The area in which magnetism acts, called the magnetic field, is where a magnetic substance or a moving electric charge is located. An illustration of the magnetic field that shows how a magnetic force is dispersed both within and outside of a magnetic substance.
What is inductor?
A wire coil called an inductor is used to store energy in the form of a magnetic field. Inductor energy storage capacity is increased by the coil's typical wrapping of an iron-containing core.
Energy density stored=B2/2?
=5*5*10-6/4*?*10-7
=125/4?
Total energy stored= Energy density stored*Volume
=?r2*h (125/4?)
=3.75*10-6J
Therefore, the energy stored in the field is 3.75*10-6J.
Learn more about magnetic field from the given link.
https://brainly.com/question/26257705
#SPJ4
write short notes one effect of friction on efficiency of machine
Answer:
Friction reduces efficiency because when two surfaces slide past each other, friction resists their motion, and in real machines, some input work is always used to overcome friction.
Please give the brainliest.
An ant travels 50.0 cm East, then turns 35 degrees North of East and moves for 40.0 cm. It then turns and moves another 30 cm North. What is the ant's total displacement (magnitude and direction)?
Please help :) I will also post questions similar to this so if you know how to solve them go ahead and look :)
The magnitude of ant's total displacement is 96.23 cm in a direction 41 degrees North of East.
What is the total displacement of the ant?The total displacement of the is obtained by resolving the displacement of the ant into x and y components as shown below.
horizontal displacement (x) = d cosθ
vertical displacement (y) = d sinθ
where;
θ is the direction of the displacementd is the magnitude of the displacementFirst displacement at 50 cm East; (θ = 0⁰)
x = 50 cm x cos(0) = 50 cm
y = 50 cm x sin(0) = 0
second displacement at 40 cm at 35 degrees North of East;
(θ = 90⁰ - 35⁰ = 55⁰)
x = 40 cm x cos(55) = 22.94 cm
y = 40 cm x sin(55) = 32.77 cm
third displacement at 30 cm North; (θ = 90⁰)
x = 30 cm x cos(90) = 0
y = 30 cm x sin(90) = 30 cm
Net horizontal displacement;
∑x = 50 cm + 22.94 cm + 0 = 72.94 cm
Net vertical displacement;
∑y = 0cm + 32.77 cm + 30 cm = 62.77 cm
The total displacement is calculated as;
D = √[ (∑x)² + (∑y)² ]
D = √[ (72.94)² + (62.77)² ]
D = 96.23 cm
The direction of the total displacement;
θ = arc tan (Σy/Σx)
θ = arc tan (62.77/72.94)
θ = 40.7⁰ ≈ 41⁰
Learn more about total displacement here: https://brainly.com/question/15164011
#SPJ1
HELP HELP HELP I NEED HELP QUICK PLEASE
Two objects of masses 20 kg and 8 kg are hung from the ends of a stick that is 70 cm long and has marks every 10 cm, as shown. ABCDEFG 10 20 30 40 50 60 20 kg 8 kg If the mass of the stick is negligible, at which of the points indicated should a cord be attached if the stick is to remain horizontal when suspended from the cord? 1. E 2. F 3. B 4. G 5. A 6. C 7. D
Option 3. is the correct answer.
Mass of object 1 at one end = 20 kg
Mass of object 2 at the other end = 8 kg
The total length of a stick = 70 cm
The mass of the stick is negligible
As we know that x = m₁x₁+m₂x2/m₁ + m₂
x = 20(0) + 8(70)/20 + 8
As the first object is at the start so distance is equal to 0
x = 20 cm
Point B is the point from which the stick remains horizontal when suspended from the cord.
You can learn more about masses attached to a string from the following link;
https://brainly.com/question/14400067
#SPJ4
A ball is held at rest at the top of a hill. The ball is then released and starts rolling down the hill. At the bottom, it reaches level ground and keeps rolling along the ground. Consider the level ground at the bottom of the hill as zero height.
The correct answer is the movement of the ball because of conversation into kinetic energy.
Why here potential energy is changed to Kinetic energy?
The ball's stored potential energy becomes kinetic energy as it begins to move and rolls down the slope. The movement of the objects is caused by this kinetic energy.
Due to its height above the ground, the ball has gravitational potential energy when it is at the top of a hill.
Due to its velocity as it rolls down the hill, the potential energy is changed into kinetic energy.
Hence due to the ball's collision with the wall, it abruptly stops, converting its kinetic energy into internal energy.
To learn more about potential energy is changed to Kinetic energy from the given link
https://brainly.com/question/24933254
#SPJ4
Which of the following changes would result in a clockwise emf in the loop? When you consider each option, assume that no other changes occur.
Check all that apply.
a) The magnitude of B increases.
b) The magnitude of B decreases.
c) The loop rotates through 45 degrees about the vertical axis (vertical dotted line) shown in the diagram.
d) The loop rotates through 45 degrees about the horizontal axis (horizontal dotted line) shown in the diagram.
e) The loop moves to the right while remaining in the plane of the page.
f) The loop moves toward you, out of the page, while remaining parallel to itself.
The conditions which would result in clockwise emf in loop are
a) The magnitude of B increases
c)The loop Rotates through 45 degrees about vertical axis
This all happens according to the right-hand thumb rule of electromagnetics. The EMF (Electro Motive Force) changes according to the movement of Loop as it is dependent on the motion which further connects to the right hand thumb rule as shown in the figure attached.
To know more about the Right Hand Thumb Rule :
brainly.com/question/11521829
#SPJ4
what is the maximum speed vmax that the cylinder can move along its circular path without slipping off the turntable?
The cylinder may move along its round path at the maximum speed vmax without falling off the turntable, which is 0.343 m/s. For a mass m body at speed v in a circular of radius r, the centripetal force Fc is Fc| = m v 2/r.
How quickly can you go?The fastest a person can go is considered to be at maximum speed. Velocity is what is meant by the term "acceleration," and since velocity has both a greater acceleration, athletes' acceleration can fluctuate depending on whether they are accelerating in one direction or both.
What is the best way to determine a wave's maximum speed?Equation Speed = Wavelength x Frequency describes how wave speed relates to wave wavelength and wave frequency. Given the wavelength and frequency, this equation could be used to determine the wave speed.
To know more about maximum speed visit:
https://brainly.com/question/10236290
#SPJ4
. consider the replacement of the 400 mw san juan thermoelectric power plant in puerto rico, which uses heavy fuel oil to generate electricity, with a solar photovoltaic farm. the oil plant has a heat rate of 10,811 btu/kwh and a capacity factor of 53%. a. for installation of south-facing fixed tilt pv arrays, with tilt angle equal to the local latitude in san juan, how many acres of collector surface area would be required to replace the generation from the fuel oil plant? assume that the photovoltaic cells have an efficiency of 17%. b. by how many acres can the surface area in part (a) be reduced if single-axis tracking is added (with the collector tilt angle still equal to the local latitude)? c. what will be the annual fuel cost savings ($) if the oil power plant is retired, if heavy fuel oil costs $290 per metric ton and has a heating value of 39,500 btu/kg?
Annual saving energy produced *cost of oil/heating value is
$ 10020.46177.
Latitude and longitude: what are they?Latitudes are lines that are horizontal and show how far a location is from the equator. In relation to the meridian in Greenwich, England, longitudes are vertical lines that show the east and west directions. Latitude and longitude are used in conjunction to locate points or places on the globe by cartographers, geographers, and others.
Puerto Rico's capital city's latitude and longitude are 18° 27' 58.7988" North and 66° 6' 20.5956" West.
Local San Juan latitude divided by tilt angle equals 18.46 WBAN No. 11641 = for year = 5.5 provides information on solar radiation for flat plate collectors facing south with a fixed tilt.
KWh/m2/day = 5.5 KWh/m2/day (1 day =3600h)
Formula used-
Solar radiation at that place* Collector Area *Collector efficiency = Heat rate * Output
power*Capacity factor
1 KW= 3,412.14 BTU/h
Heat rate* output power* capacity factor = 10,811*400*10^3*0.53 BTU/h = 671699.2855
KW
Collector Area = 671699.2855*3600/5.5*0.17
= 25862218.48 m^2= 6390 acres
C.
Cost of oil = 290$ /10^3 kg
Energy produced= 400*10^3 KW = 1364856 *10^3 BTU/h
Heating value = 39,500 Btu/kg
Annual saving Energy produced *cost of oil/heating value
= $ 10020.46177
To know more about latitude and longitude visit:
https://brainly.com/question/3070484
#SPJ4
Which option is correct and explain why (in detail)? Also, ignore the graph I drew to the right.
If two balls are projected with initial velocity v and 2v respectively, the ball that is projected with a velocity of 2v would reach the ground first.
What is a projectile?The term projectile has to do with the kind of motion that uses a parabolic path. The parabolic path is a path that is curved. For instance, if you trough a ball from one point to the other, the ball does not follow a straight path, the path of the ball is curved.
The time that it takes for the ball to reach the ground from the point of projection is dependent on the initial velocity of the ball. Thus, if the ball has been projected with a higher initial velocity then the ball would reach the ground faster and vice versa.
Thus, given that the velocity 2v is twice the velocity v, the ball that is projected at this velocity would reach the ground first.
Learn more about projectile:https://brainly.com/question/11422992
#SPJ1
An astronaut is traveling in a spacecraft in outer space in a straight line at a constant speed of 0.500c. Which of the following effects would she experience?
A.Her heart rate would change.
B.Some of the dimensions of her spacecraft would be shorter.
C.None of those answers is correct.
D.She would find it harder to breathe.
E.She would feel heavier.
If an astronaut is traveling in a spacecraft in outer space in a straight line at a constant speed of 0.500 c, she would feel heavier.
According to relativity, the faster one moves, the more mass they have. If one travels at speed of light, their mass becomes infinite and would have to slow down.
M = Mo / √ [ 1 - ( c² / v² ) ]
M = Mass of body at a given speed
Mo = Mass of body at rest
c = Speed of light
v = Speed of body
Here, v = 0.5 c
M = Mo / √ [ 1 - ( c² / ( 0.5 c )² ) ]
M = Mo / √ - 0.75 / 0.25
M = Mo / √ - 3
M > Mo
Therefore, f an astronaut is traveling in a spacecraft in outer space in a straight line at a constant speed of 0.500c, she would feel heavier.
To know more about relativity
https://brainly.com/question/28289663
#SPJ4
Please help its finals! I’ll give BRAINLIEST
Answer:
Before the rubber ball moves, it's stationary. Therefore the energy is Potential. As it rolls, the energy is transferred equally between the ball itself and the ramp, making the energy transferred Kinetic Energy.
Explanation:
if you want a characteristic rl time-constant of 5.00 s, and you have a 100 ohms resistor, what value of self-inductance [in h] is needed:
The self-inductance of the RL circuit is 500 H.
We need to know about the time constant r-l circuit to solve this problem. The time constant of RL circuit depends on the resistance and inductance of its circuit. It can be written as
T = L / R
where T is the time constant, L is inductance and R is resistance.
From the question above, the given parameters are
T = 5 s
R = 100 Ω
By using the equation, we can calculate the self-inductance
T = L / R
L = T . R
L = 5 . 100
L = 500 H
Find more on time RL circuit at: https://brainly.com/question/17050299
#SPJ
how do scientists predict the location of electrons in the modern model of the atom
Answer:
Scientists predict the location of electrons in the modern model of the atom by using the Heisenberg uncertainty principle.
the phase velocity of each wavelength of white light moving through ordinary glass is a function of the wavelength; that is, glass is a dispersive medium. what is the general dependence of vp on l in glass? is dvp>d l positive or negative?
The general dependence of phase velocity on glass can be expressed as vₓ = v₀(1 + 2B/nλ²) and it is positive.
What is phase velocity?The phase velocity of a wave is the speed at which the wave propagates through any medium. This is the speed at which the phase of any frequency component of the wave propagates. For such a component, arbitrary phases of the wave appear to travel with phase velocity.
For glass we know that, n = A + B/λ²
vₓ = v₀ - λ(dv₀/dλ)
Where, vₓ = velocity of light in glass
v₀ = phase velocity
λ = wavelength
vₓ = v₀ - λ(dv₀/dn × dn/dλ)
= v₀ - λ (-c/n²) dn/dλ
= v₀+v₀ (λ/n × dn/dλ)
Now,
dn/dλ = d(A + B/λ²)/dλ
= -2B/λ³ which is negative
vₓ = v₀ - v₀ (λ/n) (-2B/λ³)
vₓ = v₀(1 + 2B/nλ²)
To know more about phase velocity visit:
https://brainly.com/question/17295857
#SPJ4
a .5 kg steel ball is suspended from teh ceiling by a 2.5 m long string. the ball is pulled to the side until it is 1 m above its lowest point and then released from rest. the tension in the string when the ball passes through its lowest position is
The tension in the string when the ball passes through its lowest position is 5N (rounded).
The pulling force transmitted axially by the means of a string, a rope, chain, or similar object, or by each end of a rod, truss member, or similar three-dimensional object; tension might also be described as the action-reaction pair of forces acting at each end of said elements.
How to calculate the tension in the string when the ball passes through its lowest position?
Tension = m*g
T = 0.5 * 9.8
= 4.9N
Approximately the tension would be equal to 5N (rounded)
Learn more about tension https://brainly.com/question/26178075
#SPJ4
What is KE and PE? Please explain me in detail
A student needs to use the metric system while measuring the length of a box. Which units should he use?centimetersinchesfeetyards.
Answer:
While measuring the length of a box he should use centimetres if he is using the metric system.
which one of these represent total momentum of a system of two particles traveling one against the other?
The total momentum of a system is the vector sum of all the individual masses that comprise the system.
Moreover, To calculate the total momentum of two objects during a collision, add their individual momentums. You can calculate the momentum for each object using the formula p=mv, where p is the momentum, m is the mass, and v is the velocity. The law of conservation of momentum can be expressed as follows. For a collision between object 1 and object 2 in an isolated system, the total momentum of the two objects before the collision is equal to the total momentum of the two objects after the collision.
You can learn more about this at:
https://brainly.com/question/20301772#SPJ4
the rings of neptune: the rings of neptune: all lie within neptune's roche limit. often appear as clumpy ring arcs, rather than complete and symmetrical. number five, with three narrow, two more diffuse. were confirmed by the voyager 2 in 1989. all of these are correct.
All the statements in the question about the rings of Neptune above are correct.
Neptune is the eighth planet in our Solar System. It has a planetary ring system that may consist of ice particles coated with silicates. The first was detected by a team led by Edward Guinan in 1968, with the following hypothesizes solved by Voyager 2's images in 1989.
There are three main rings in Neptune's planetary ring system:
Adams ring, 63000 km from Neptune's center.Le Verrier ring, 53000 km from Neptune's center.Galle ring, 42000 km from Neptune's center.The picture attached is a combined color and near-infrared image of Nepture created by NASA and ESA.
Learn more about Neptune at https://brainly.com/question/9109943
#SPJ4
a voltmeter pointer is 6 centimeters in length (see figure). find the number of degrees through which it rotates when it moves 2.1 centimeters on the scale. (round your answer to two decimal places.)
When the voltmeter pointer moves 2.1 centimeters on the scale, it rotates 20.06 degrees. The concept is the measure of an arc equals to the measure of the central angle.
What is arc and central angle of a circle?An arc is a curve or a portion of the circumference of a circle. A central angle is an angle formed by two radii in a circle.The ratio of an arc length to the circumference equals to the ratio of a central angle to the total degrees of a circle.
[tex]\frac{x}{2 \pi r} = \frac{\alpha }{360}[/tex]
Where
x = arc lengthπ = 3.14r = radiusα = central angleGiven the case a voltmeter pointer is 6 centimeters in length. When it moves 2.1 centimeters on the scale, what is the number of degrees through which it rotates?
Without the figure, we assume that the radius of the circle is 6 cm when the arc length is measured. So, we got:
x = 2.1 cmr = 6 cmThe number of degrees through which it rotates is the central angle.
[tex]\frac{x}{2 \pi r} = \frac{\alpha }{360}[/tex]
[tex]\frac{2.1}{2 \times 3.14 \times 6} = \frac{\alpha }{360}[/tex]
[tex]\frac{2.1}{37.68} = \frac{\alpha }{360}[/tex]
[tex]\alpha = \frac{2.1 \times 360}{37.68}[/tex]
α = 20.06°
Hence, the number of degrees through which it rotates is 20.06 degrees.
Learn more about arc and central angle here:
brainly.com/question/12647381
#SPJ4
A- In the mobile in (Figure 1) , what is the inertia of the giraffe Mgir in terms of the inertia Mm of the monkey?
(Mg/Mm)
B- In the mobile in (Figure 1) , what is the inertia of the elephant Mel in terms of the inertia Mm of the monkey?(Me/Mm)
The inertia of the elephant Mel in terms of the inertia Mm of the monkey is 2Mm
the moment = 0
from monkey & giraffe
Mm*3d = Mg*d
Mg = 3*Mm
-------------------
for Me & Mg
(Mg + Mm)*2d = Me*4d
(3Mm+Mm)*2d = Me*4d
4*Mm*2 = 4*Me
Me = 2Mm
Until some force changes the speed or direction of an object, it will continue to move in the same direction. This is known as inertia. The phrase is correctly understood as a shortened form of "the principle of inertia," which is a concept that Newton discussed in his first law of motion. Unless influenced by an unbalanced force, an object at rest stays at rest, and an object in motion stays in motion while maintaining a constant speed and a straight line. An object at rest has a tendency to stay at rest, and an object in motion has a tendency to continue moving in a straight line at a constant speed.
Learn more about inertia here:
https://brainly.com/question/3268780
#SPJ4
Research and draw a diagram showing a food chain with at least four levels of organisms, starting with plants or algae (producers). Show how each organism in your diagram gets energy, and use arrows and labels to indicate the relationship between each of the organisms. Research the average daily calories each organism on your food chain must consume in order to maintain proper body function. While this diagram is called a food chain, it should actually be called a food cycle because you’ll be including a decomposer to tie together the animal at the top of the food chain back to the producers. Along with the diagram, write a three-paragraph explanation of why energy transfer is not 100% efficient in a food chain. Explain where the lost energy goes, and include a paragraph at the end that explains the role of decomposers such as fungi and bacteria. How do they increase entropy to the maximum? Finally, explain how producers (the plants and algae) decrease entropy as the cycle starts over again. In your explanation, include definitions of the second law of thermodynamics and entropy.
Energy is transferred along the food chain from the producers to the decomposers.
What is the food chain?The term food chain has to do with the process by which energy is passed from one organism to another along the in the ecosystem. Let us recall that the ecosystem is a unit that is composed of living and non living parts and is able to sustain itself.
According to the principle of second law of thermodynamics, energy transfers is not 100% efficient. Thus as energy is transferred along the food chain, only 10% of the energy that was acquired from the pervious trophic level is passed on to the succeeding trophic level.
This is because of the fact that the remainder of the energy is utilized in the metabolic activities of organisms. We can rightly call the food chain a food cycle because as we can see from the image, energy is obtained from the sun and passed along the food chain and returned to the producers by the activities of the decomposers.
Learn more about food chain:https://brainly.com/question/7564953
#SPJ1
Question 2
A car traveling at 114 km/h slows at a rate of 3 m/s² for 2.6 seconds. How far does the car move?
The car travels a distance of 72.202 m
What do you mean by deceleration?
Deceleration is a specific instance of acceleration that only applies to moving objects. Consequently, it is the rate of object slowing down.
It is a vector quantity is deceleration.The opposite of acceleration is deceleration.Its symbol is -a, where a stands for acceleration.Simply applying Galileo's equation, which accounts for both linear acceleration and deceleration equally if the deceleration is constant, the distance covered in deceleration is given by the formula:-
s = ut + ½at²
where
s represents the whole distance traveled during time t.
u is the object's speed when t is equal to 0.
a is the acceleration. If the object is speeding up, the value is positive; if it is slowing down, the value is negative.
Given in the question,
Velocity, u = 114 km/h
= 114 x 1000/ 60 x 60
= 31.67 m/s
Deceleration, -a = 3 m/s²
s = ut + ½at²
= 31.67 x 2.6 - 3 x 2.6 x 2.6/2
= 82.342 - 10.14
= 72.202 m
Hence, The car travels a distance of 72.202 m
To learn more about deceleration from the given link
https://brainly.com/question/75351
#SPJ1
A 4 kg block is pushed up an incline that makes a 30o angle with the horizontal, as shown in the figure. Once the block is pushed a distance of d=5.0 m up the incline, the block remains at rest. What is the approximate change in the gravitational potential energy of the block-
Answer: 98 J
Explanation:
The starting GPE is 0 because the block is at h=0 (bottom of the incline).
The block moves 5.0 m up the incline, so you have to figure out its height (h) relative to the bottom of the incline, where h=0.
sin30 = h/5
solve for h: h = sin30 x 5 = 2.5m (height of the block, 5 m up the incline)
Now you can solve for GPE = mgh
GPE = (4 kg)(9.8 m/s2)(2.5 m) = 98J
if you swing a bucket of water fast enough in a vertical circle, at the highest point the water does not spill out. this happens because an outward force balances the pull of gravity on the water. group of answer choices true false
If you swing a bucket of water fast enough in a vertical circle, at the highest point the water does not spill out. This happens because an outward force balances the pull of gravity on the water - True
What is centripetal force?
It is the force applied to a body that is rotating in a circle and is pointed in the direction of the body's center.Centripetal force formula:F = mv^2/r
This experiment demonstrates Newton's first law of motion, which states that objects either remain still or move straight ahead. Inertia is the name for this quality. Force is required to cause an object to rotate in a circle.
The water inside the pail pulls on your arm as you swing it back and forth because it wants to keep moving in a straight line while you want it to go in a circle. The water pushes against the bottom of the bucket as you hold on to prevent it from flying away. The water pushes more forcefully against the bottom of the pail as you swing higher and higher. However, gravity tries to remove the water from the bucket when you turn it upside down. Ultimately, whichever force—gravity or centripetal—is stronger wins. The water will remain in the pail as long as you swing the bucket quickly enough for centripetal force—the force of the water pressing against the bottom of the bucket—to outweigh gravity.
Hence, the correct answer is True.
To learn more about centripetal force from the given link
https://brainly.com/question/79801
#SPJ4