a a 10000 kg train was moving with 48m/s then starts decelerate with constant rate to stop on its stationary that is found 192m away so the train slides through this distance and stops. determine the acceleration of the train​

The wave length of first line of Lyman series is  121.5 nm in  Ultraviolet radiation.

The wave length of first line of Lyman series is

1/λ = R (1/1² - 1/2²) = 1.097 × [tex]10^{7}[/tex](1 - 1/4)

λ = 121.5 nm

b) Ultraviolet.

Sunlight and man-made sources, such tanning beds, both release non-ionizing radiation known as ultraviolet radiation. It can be risky to one's health even if it offers some advantages to humans, such as the production of vitamin D. UV radiation from the sun is defended against by broad-spectrum sunscreen. Most UVA radiation reaches the surface of the Earth; the atmosphere does nothing to block these rays. In addition to causing eye damage and skin aging, UVA radiation can weaken your body's immune system. To destroy bacteria, produce luminous effects, cure inks and resins, cure suntan lotion, cure inks and resins, and cure inks and resins, UV radiation is widely utilized in industrial processes as well as in medical and dental services. Various UV applications call for varied UV wavelengths and intensities

Learn more about Ultraviolet radiation here:

https://brainly.com/question/14663819

#SPJ4

The three types of irony in the crucible are:

Irony is when there’s a contradiction between expectation and reality. It is a commonly used literary device.

Verbal irony:

Verbal irony is generally found in plays, speeches, and literature when someone says something that is extremely different from the reality of the situation. Verbal irony is used intentionally by the speaker or the character.

Dramatic irony:

We can find  dramatic irony in plays, TV shows, movies. It occurs when we know something that the actor does not.

Situational irony:

Situational irony describes a complete difference between what is expected to happen and  what actually happen.

Learn more about irony:

https://brainly.com/question/19194354

#SPJ4

The molar mass of the gas with specified density and pressure at certain temperature is calculated to be 64.02 mol⁻¹.

Given,

ρ = 2.09 g/l

T = 100° C

P = 1 atm

Molar mass (Mm) can be written as the ratio of given mass of the gas (m) and number of moles (n) it contains.

Mm = m / n ---(1)

Density can be written as the ratio of mass and volume.

ρ = m / V ---(2)

Placing (1) and (2) in ideal gas law equation, we have

P V = n R T

"P V = m / Mm × R T"

Making Mm as subject, we have,

Mm = m / V × R T/P

Convert the temperature of the gas from degrees Celsius to Kelvin then substituting the values,

Mm = m / V × R T/P

Mm = 2.09 g/l × 0.0821 atm L/mol K× (100 + 273.15)K × 1/ 1 atm = 64.02 mol⁻¹

To know more about molar mass:

https://brainly.com/question/1486415

#SPJ4

The missing number is 225 and the decay is the beta decay in the given reaction.

In nuclear physics, beta decay can be described as a type of radioactive decay in which a beta particle is emitted from an atomic nucleus, transforming the original nuclide. Beta decay of a neutron transforms a nuclide into a proton by the emission of an electron accompanied by an antineutrino.

The two types of beta decay are known. In beta minus (β⁻) decay, a neutron is transformed to a proton, and the process forms an electron and an electron antineutrino; while in beta plus (β⁺) decay, a proton is transformed to a neutron and the process forms a positron and an electron neutrino and β+ decay is called positron emission

[tex]^{225}Ra_{88} \longrightarrow ^0e_{-1} + ^{225}Ra_{87}[/tex]

Learn more about Beta decay, here:

https://brainly.com/question/25455333

#SPJ1

The pin will accelerate up and to the left.

The net force is in upward direction and to the left direction. So, pin will have acceleration up and left.

In vertical direction,

upward force = 3 N,

Downward force = 1 N

So, net upward force is = 3-1 N = 2 N

In horizontal direction,

force to the right is = 5 N

Force to the left is = 8 N

So, net force to the left is = 8-5 N = 3 N.

Net force is an unbalanced force in the direction of the greater force if the two forces are acting on an object in the opposite direction.

To know more about net force here

brainly.com/question/29261584

#SPJ4

The sound level intensity would this person hear is  116.98 dB

How is loudness of a sound measured?

The formula D = 10 log (I/I₀),  determines the decibel level of a sound. , I is its intensity in watts per square metre and I₀  is the intensity of threshold sound,

In the first case, sound is produced by 12 identical speakers

∴Intensity, I₁ = 12 I

where I is the intensity of one speaker

Decibel level in this case, D =  120dB

⇒  120 = 10× log (12I/i₀)                                 ----- eqn(1)

In second case number of speakers is reduced to 6

∴Intensity, I₂ = 6 I

Decibel level in this case, D = 10× log (6I/i₀)    ----eqn(2)

eqn(1)- eqn(2)⇒

120 - D =  10× log (12I/i₀)  - 10× log (6I/i₀)

120 - D =  10× log (12I/i₀ ÷  6I/i₀)

120 - D =  10× log(12 I/6 I)

120 - D =  10× log(2)

120 - D =  3.010

D = 116.98 dB

Therefore the sound level intensity would this person hear is  116.98 dB

To learn more about sound intensity below is the given link:

https://brainly.com/question/26861471

#SPJ4

When a ball collides with a stationary ball it will cause an elastic collision.

An elastic collision is the one in which there will be no net loss of kinetic energy in the system as a result of the collision. In a head-on collision with a stationary object of the same mass, the projectile stops and the target leaves at the same velocity as if a cue ball were shot head-on at a pool table. When a moving object collides with a stationary object of the same mass, the stationary object experiences a greater change in momentum. A moving object which collides with a stationary object. A stationary object has a significantly smaller mass. Objects at rest experience greater impact forces.

Learn more about the elastic collision in

https://brainly.com/question/12941951

#SPJ4

The wavelength of a wave is the distance or length between its two subsequent crests or troughs.

A wave's wavelength gives information about its length. The wavelength is the distance between the "crest" (top) of one wave and the crest of the following wave. The wavelength can also be determined by measuring from one wave's "trough" (bottom) to the following wave's "trough," with the same results.

Radio waves, light waves, and infrared (heat) waves are examples of electromagnetic radiation that flow through space in distinct patterns. Every wave is a specific size and shape. The distance between peaks is referred to as the "wavelength" (high points).

To know more about wavelength visit:

https://brainly.com/question/13533093

#SPJ4

The temporal rate at which angular velocity changes is known as angular acceleration. The standard unit of measurement is radians per second per second.

α = -6.6 rad/s²/0.275

α = -20.74rad/s²/0.275

t = ω - ω°/α

t = 0rad/s - 93rad/s/ -20.74rad/s

t = 4.48s

θ = (93rad/s).(4.48s) + 1/2× -(20.74rad/s) × (4.48s)

θ = 416.64 - 45.46

θ = 371.18 rad

n = θ/2π

n = 371.18 × 7 /22

n = 118.09

t = 4.48s

v° = 93rad/s × 0.275 m

v° = 25.575 m/s

s = (25.575m/s) × (4.48s) +1/2 × (-6.67m/s) × (4.48s)

s = 114.57 + 14.94

s = 129.51m

v° = 25.575 m/s

To know more about angular acceleration visit:-

https://brainly.com/question/29428475

#SPJ4

The relation between the amplitude of a wave and its speed is an important multiple choice question (MCQ) in physics and other related sciences.

Amplitude is a measure of the magnitude of a wave or signal. It is the maximum absolute value of the wave or signal over a given period of time and is usually measured in decibels (dB). Amplitude also refers to the maximum displacement of a point on a wave from its rest position. In sound, amplitude is often referred to as “volume” or “loudness”.
The amplitude of a wave is the maximum displacement of a particle from its equilibrium position and is measured in meters (m). The speed of a wave is the distance it travels in a given amount of time and is measured in meters per second (m/s).
As the amplitude of a wave increases, its speed remains constant. This is due to the fact that the speed of a wave is determined by the medium in which it is traveling, not its amplitude. For example, the speed of sound in air is the same regardless of how loud it is. The speed of light in a vacuum is also constant regardless of the intensity of the light. This means that the amplitude of a wave does not affect its speed.
However, the amplitude of a wave does affect its energy. The higher the amplitude of a wave, the more energy it carries. This is because the amplitude of a wave is directly related to the amount of energy it contains. This is why it is important to remember that the amplitude of a wave does not affect its speed, but it does affect its energy.
To know more about amplitude click-
https://brainly.com/question/3613222
#SPJ4

The kineticE=(1/2)mv² equation can be used to determine the velocity of the expelled electron. You then enter the expelled electron's energy, which was provided to you in section a, and set it to equal 1/2 the electron's mass times v².

The discovery of the "photon," or the link between light's energy and frequency, was made possible in large part by the photoelectric effect. The photoelectric effect is simply the phenomenon whereby electrons can occasionally be expelled from a metal when light is shone onto it. We looked over a number of important facts in class.

1. No electrons are emitted unless appropriate frequency of light is employed. In other words, there is a point below which, regardless of how powerful the light source is, no electrons escape the metal.

2. If you are employing light with a high enough frequency, the quantity of electrons ejected grows as the light source's intensity (brightness) rises.

3. The velocity of the expelled electrons increases as the frequency is raised above the threshold.

This leads us to the conclusion that energy and frequency are proportionate, with Planck's constant serving as the proportionality constant.

To learn more about maximum speed of electrons from given link

https://brainly.com/question/29573654

#SPJ4

Solar energy known as wind is created as air moves in relation to the Earth's surface. This type of energy is produced by the uneven heating of the Earth's surface by the Sun and is influenced by the rotation of the planet and the topography of its surface.

In the field of renewable energy, wind and solar energy are major actors. They are free energy sources, limitless, and most of all, they reduce carbon emissions from fossil fuels.

By turning the kinetic energy of moving air into electrical, wind is used to generate power. Wind drives the rotor blades of contemporary wind turbines, which transform kinetic energy into rotational energy.

To know more about wind and solar energy visit:-

https://brainly.com/question/16524443

#SPj4

Answer:

b warming your hands over a campfire.

Explanation:

This is thermal radiation, not heat conduction

The absence of actual relative sliding action between two surfaces is referred to as kinetic friction, also known as sliding resistance. Let's start by looking into friction force utilizing a straightforward concept.

What is the kinetic friction force?

Since it increases to a certain point before beginning to decline when greater power is applied to a object, this is obviously best considered as the biggest benefit: Calculating the kinematic friction force on a flat surface is easy; however, a sloped surface poses some extra difficulties.

What is friction, why is it important?

Friction is simply the force that prevents something from slipping. Every object experiences kinetic friction, which prevents many objects from moving at once. the force

To know more about kinetic friction visit:

https://brainly.com/question/17237604

#spj4

Wavelength and frequency are inversely proportional to one another.The wavelength of a wave that has a high frequency is also its shortest.

To learn more about wavelength refer

https://brainly.com/question/10728818

#SPJ4

The volume of a block that has length of 4cm, width 2cm, and height 1cm  in meters is 8 * [tex]10^{-6[/tex] m³.

How to calculate the volume of this block in meters?

The volume of block is basically multiplying the length, width, and height. Also, we can write the formula for volume in terms of the area of the base. The area of the base, B, is equal to length times width.

Given from the question
Length = 4cm = 0.04m

width = 2cm = 0.02m

height = 1cm = 0.01m

Volume of the block = length * width * height

= 0.04 * 0.02 * 0.01

= 8 * [tex]10^{-6[/tex] m³

Therefore, the volume of the block is 8 * [tex]10^{-6[/tex] m³.

Learn more about volume https://brainly.com/question/12630270

#SPJ4

The volume of the given  solid is:

V = ∭(D) dx dy dz = (1/2) * 9/2 * 9/2 = 81/8

To find the volume of the solid, we can use the triple integral. Since the solid is bounded by the planes z = x, y = x, x + y = 9, and z = 0, we can write the integral as:

V = ∭(D) dV = ∭(D) dx dy dz

where D is the region bounded by the given planes.

To set up the triple integral, we need to determine the bounds for the variables x, y, and z. Since the solid is bounded by the planes z = x, x + y = 9, and y = x, we can express z in terms of x and y. We have:

z = x

Since x + y = 9, we can also express y in terms of x:

y = 9 - x

Substituting this expression for y into the equation for z, we get:

z = x = x

Therefore, the bounds for x are 0 ≤ x ≤ 9/2. The bounds for y are 0 ≤ y ≤ 9 - x, and the bounds for z are 0 ≤ z ≤ x.

Using these bounds, we can set up the triple integral as follows:

V = ∭(D) dx dy dz = ∫x=0 to x=9/2 ∫y=0 to y=9-x ∫z=0 to z=x 1 dz dy dx

Evaluating this integral, we find that the volume of the solid is:

V = ∭(D) dx dy dz = (1/2) * 9/2 * 9/2 = 81/8

Therefore, the volume of the solid is 81/8.

Learn more about solids, here:

https://brainly.com/question/9363272

#SPJ1

The velocities of the skaters when the ball is caught is 0.02m/s.

The mass of the skater is  m1 = 50kg

The mass of the ball is m2=  0.02kg

The velocity of the ball is v1= 5m/s

According to the law of conservation of the momentum expression for finding the another skater velocity when catching the ball is ,

V2 =  M2V1/ (m1 + m2 )

Substituting the values, we have

V2 = 0.02m/s

In conclusion, Velocity is described as the directional speed of an object in motion as an indication of its rate of change in position as observed from a particular frame of reference and as measured by a particular standard of time.

Learn more about velocity at: https://brainly.com/question/80295

#SPJ1

To calculate how long the current must be switched on in order to copper plate the coin, we need to use the formula for the time required to deliver a certain amount of electric charge:

t = Q / I

where t is the time, Q is the electric charge, and I is the current.

In this case, the electric charge is 30 C, and the current is 100 mA. Plugging these values into the formula, we get:

t = 30 C / 100 mA

= 0.3 seconds

Therefore, you would need to leave the current switched on for 0.3 seconds in order to copper plate the coin.

To learn more about charge and current,

https://brainly.ph/question/5918750

https://brainly.com/question/27003377

The ratio of the kinetic energy of a 2000 kg mass to the kinetic energy of a 500 kg mass traveling at the same speed is 4.

The ratio of the kinetic energy of a 2000 kg mass to the kinetic energy of a 500 kg mass traveling at the same speed can be calculated using the formula for kinetic energy:

where KE is the kinetic energy, m is the mass of the object, and v is the velocity of the object.

If we let KE1 be the kinetic energy of the 2000 kg mass and KE2 be the kinetic energy of the 500 kg mass, we can write:

KE1/KE2 = (0.5 * 2000 kg * v^2) / (0.5 * 500 kg * v^2)

             = (2000 kg) / (500 kg)

             = 4

Therefore, the ratio of the kinetic energy of the 2000 kg mass to the kinetic energy of the 500 kg mass is 4. This means that the 2000 kg mass has four times as much kinetic energy as the 500 kg mass, assuming they are traveling at the same speed.

Learn more about Kinetic Energy here:

https://brainly.com/question/114210

#SPJ4

Answer: Calculate the slope.

Explanation:

Answer:

B. Calculate the slope

Explanation:

The other choices, determining the y-intercept, calculating the area under the line, and determining the x-intercept, are not relevant to determining the inertial mass of the block.

When the audience is aware of plot developments before the characters do, they are forced to anticipate, fear, and wish the characters would learn the truth sooner.

Dramatic irony works well for building tension and suspense. The viewer always has an advantage over the characters. As a result, there is inescapable tension as the audience eagerly awaits a catastrophe or conflict that they know is about to happen.

Dramatic irony is a technique used by authors to capture and hold the interest of their readers. Curiosity is sparked by it. Additionally, it raises tension by making the spectator fear the moment when characters discover the information they already know.

To know more about theatrical irony visit:-

https://brainly.com/question/10334334

#SPJ4

Answer: No

Explanation:

Frequency is how often each wave passes

Wavelength is the physical measure of the length of each wave

The general differential equation of wave motion is ∂t∂y=v2∂x∂y.

All of the quantities in the wave equation, which is provided by y = 0.002 sin 2(5t - x/12), are given in SI units. After 0.2 seconds, determine the particle's displacement at a distance of 5 m from the origin.

Applying F=ma to a string of infinitesimal length dx yields the wave equation (see the diagram below). We imagine the basic harmonic motion of our tiny length of string bobbing up and down.

Since the fundamental wave equation is a linear differential equation, the superposition principle will be respected. This means that the displacements that would have been created by each wave individually are added to create the net displacement that is caused by two or more waves.

To learn more about wave motion from given link

https://brainly.com/question/1314101

#SPJ4

0.25 m is the radius of the coil. when a round flat metal coil has 180 turns and negligible resistance.

the action of defending oneself from an aggressor or refusing to accept something.

We must take the Faraday law into account in order to explain this issue.

When the magnetic field changes due to the induced emf, as indicated by the equation d/dt, the voltage equals I*R=17*6=102 V.

After a coil, the magnetic flux is as follows:

If N is equal to N*A*B, then d is equal to N*A*dB/dt, where A and N are the coil's area and number of turns.

A=*R2, where R is the coil's radius.

Finally, there is;

dФ/dt= N*π*R^2*dB/dt then

R= [dФ/dt/(N*π*dB/dt)]^1/2= [102/(180*π*3)]1/2=245.2*10^-3=≅0.25m

To know more about resistance visit:-

https://brainly.com/question/29427458

#SPJ4

Find the ski race's end speed in m/s and the time it took to show that, shockingly, obtaining a running start offers very little advantage.

Find the ultimate speed and the time required for a skier to travel 60.0 metres over a 25-degree slope to illustrate this. Two times 70 divided by 2.5 metres per second for the initial speed plus 26.3106 metres per second for the end speed is the formula we used to solve for t. The entire amount of time required to descend the slope is 4.86 seconds. advantage Skis slide because the tiny layer of snow beneath them melts as a result of friction converting your kinetic energy (skiing) into thermal energy (heat). In downhill skiing, for instance, when the athlete is propelled down

To learn more about advantage  please click on below link

https://brainly.com/question/13221821

#SPJ4

The voltage of the stove with a current of 3 amperes, which run through the coiled heating element of a stove and the resistance of the element is 80 ohms, is 360 volts.

Voltage, also known as electric pressure, is the difference in electric potential between two points. In a static electric field, it corresponds to the work needed per unit of charge to move a test charge between the two points.

From the question given

resistance (R) = 80 ohms

Current (I) = 3 amperes

from Ohm's law we will use this equation

V = I * R

= 3 * 80

= 240volts.

Therefore, the voltage of the stove is 240 volts.

Learn more about voltage https://brainly.com/question/13521443

#SPJ4

Answer:

The answer is probably D

Explanation:

None others make sense

One child has blonde hair like their mother, and their sibling has brown hair like their father; this is due to genetics. A baby's gender and the reasons why some diseases run in families are also influenced by DNA.

Many of your characteristics, like your skin and hair colors, are determined by genes that are passed down to you. Perhaps Emma's mother carries both the brown and red hair genes, and she gave Emma the red hair gene.

An alteration to just one copy of the gene results in the autosomal dominant inheritance pattern. Mutations in both copies of the gene pair create the autosomal recessive inheritance pattern.

To know more about genetic factors visit:-
https://brainly.com/question/29517743

#SPJ4