(a) a stuntman with a mass of 88.5 kg swings across a pond from a rope that is 11.5 m. at the bottom of the swing the stuntman's speed is 8.30 m/s. the rope's breaking strength is 1,000 n. will the stuntman make it across the pond without falling in? yes no (b) what if? what is the maximum speed (in m/s) that the stuntman can have at the bottom of the swing on this vine to safely swing across the river? m/s

Answers

Answer 1

a) Since the rope's breaking strength is 1,000 N Therefore therefore the stuntman cant make it without falling

b) The maximum speed (in m/s) that the stuntman can have at the bottom of the swing on this vine to safely swing across the river is 4.24m/s

To determine if the stuntman will make it across the pond without falling, we will solve for tension. Using the equation for Tension which is mathematically given as

T = mv²/r + (mg)

Where:

Mass of swing; m = 88.5

Speed or velocity of the stuntman; v = 8.30m/s

Length of rope; r = 11.5m

Gravity; g = 9.8

T =(88.5*8.30)²/11.5 + (88.5*9.8)

T = 6096.76 + 867.3

T = 5229.46N

Since the rope's breaking strength is 1,000 N Therefore he cant make it without falling

b. In finding the maximum speed that the stuntman can have at the bottom of the swing, We substitute into the equation for tension given as:

T = mv²/r + (mg)

1000 =(88.5*v²)/11.5 + (88.5*9.8)

v² = 4.24m/s

Learn more on maximum speed from:

https://brainly.com/question/14881993?referrer=searchResults

#SPJ4


Related Questions

a single loop of wire with an area of 9.01×10−2 m2 is in a uniform magnetic field that has an initial value of 3.65 t , is perpendicular to the plane of the loop, and is decreasing at a constant rate of 0.197 t/s .

Answers

(a) The electromotive force induced in the loop is 0.017 V.
(b) The ratio of induced electromotive force  to loop resistance yields the current in the circuit.

How can we calculate emf induced in a loop?
The emf induced in the loop can be calculated using Faraday's law:
emf = dФ/dt ⇒ emf = A * (dB/dt)
where A represents the area of the loop and dB/dt is the change in magnetic field with time.

Therefore, using the above relation, emf induced= 0.0901 * 0.197= 0.017V
Again, using Ohm's law the current in the loop can be determined since
Current = emf/Resistance.

Thus,
(a) The electromotive force induced in the loop is 0.017 V.
(b) The ratio of induced electromotive force  to loop resistance yields the current in the circuit.

To learn more about it, tap on the link below:
https://brainly.com/question/13744192

#SPJ9
 

.
Determine the acceleration of an object that can go from 0-60 m/s over the course of
1600 m.

Answers

Answer:

1.125 m/s^2

Explanation:

Given:

u = 0v = 60 m/sS = 1600 m

To Find:

Acceleration (a)

Formula used:

v^2 = u^2 + 2aS

where,

v = final velocity

u = initial velocity

a = acceleration

S = Displacement

Let the acceleration be a.

Using the above formula, we have

60^2 = 0^2 + 2(a)(1600)

3600 = 3200a

a = 36/32

a = 9/8

a = 1.125 m/s^2

So, the acceleration is 1.125 m/s^2.

URGENT!! ILL GIVE
BRAINLIEST! AND 100 POINTS

Why will a balloon filled with helium float in air?

A. Helium is a dense as air
B. Helium is denser than air
C. Helium is diatomic molecule
D. Helium is less dense than air

Answers

Answer:

D is the correct answer

Explanation:

Helium-filled balloons rise in the air because the density of helium is less than the density of air.

A block of wood has a mass of 120 g
and a volume of 200 cm³. What is the density of
the wood?

Answers

0.6 grams per cubic centimeter
So, if we're going to solve this problem, the mass here is 1 hund, 2120 grams and the volume is 200 cubic centimeter. Therefore, our density is, we have 0.6 grams per cubic centimeter okay.

Answer: 0.6 g /cm^3

Explanation:

Just plug in the value in the equation d=m/v and you will get the answer!

Kato is out camping with his family, and they decide to start a campfire because of the cold air. After everyone roasts marshmallows to a crispy golden brown, they eat them, and then they decide to go to sleep. Before going to sleep, Kato pours water over the campfire to put it out. He notices that steam drifts from the burned wood and ashes even though the fire is gone and the coals have stopped glowing.

Which statements best describe how energy is conserved in this scenario?

Select all that apply.

Answers

The statement that best describes how energy is conserved in this scenario is that the cold air absorbed energy from the water vapor, so it condensed and formed steam and the liquid water absorbed the energy of the fire, so it changed into a gas and evaporated. That is option B and D respectively.

What is conservation of energy?

The law of conservation of energy states that energy is neither created nor destroyed but can be changed from one form to another.

At the camping, energy from a lighter is being transferred to the wood and is being sustained by the chemical energy in the wood.

Upon the use of water to extinguish the fire, the liquid water absorbed the energy of the fire, so it changed into a gas and evaporated.

Also around the fire is the cold air which can absorb heat to form steam after condensation.

Learn more about energy here:

https://brainly.com/question/25959744

#SPJ1

5. Modern houses have systems to control internal air temperatures in times of very cold or hot weather. In these homes, hot or cool air is pumped into the interior of the house to help keep the temperature comfortable. Based on what you know about how cool and warm air circulate in the atmosphere, what might an engineer need to consider when designing a heating/cooling system for a home in a cooler climate?

How might the design differ for a house found in a warmer climate?

Answers

The engineer should take into account the convective currents that cause higher temperature gases to rise and lower temperature gases to sink.

What is convection?

Convection is a term that refers to the way in which heat is transmitted in a liquid or gaseous state as a consequence of the actual movement of particles at different temperatures. If this movement is due to the effect of gravitation, due to differences in density, it is called natural convection.

What might an engineer have to consider when designing a heating/cooling system for a house in a colder climate?

The engineer must take into account that, due to their density, the hottest gases tend to rise, and the coldest gases descend. Therefore, he would have to find a way for the hot gases to leave the floor and circulate around the house so that it stays at a warm temperature.

How might the design of a house that is in a warmer climate differ?

In the case of a house that is in a warmer climate the engineer should take into account convection because it can find a way in which the hot gases rise and are released through the roof of the house and keep the gases cold inside the house.

Learn more about convection in: https://brainly.com/question/4138428

#SPJ1

how close were your experimental results to the theoretical values? what experimental factors contributed to the error between experimental and theoretical measurements of specific heat?

Answers

Actual specific heat capacity would be less than the computed experimental specific heat capacity.

The experiment's measurement of water's specific heat capacity, c, is higher than the accepted value for c. This is because some heat was lost to the surroundings, causing the experimental temperature rise to be q smaller than the projected temperature rise.

The quantity of heat energy needed to raise the temperature of 1 kg of a material by 1 K is measured as specific heat capacity. It is crucial because it will show how much energy will be needed to raise or lower an object's temperature by a certain amount for a certain mass.

In this experiment, the primary source of error is heat loss by conduction. The conservation of energy serves as the theoretical foundation for this particular heat test. Energy can be in the form of heat, and in this instance, heat will be transported from the sample to the water.

To know more about theoretical values refer to the given link :

https://brainly.com/question/15741538?referrer=searchResults

#SPJ9

the electric potential of a hydrogen atom is modeled by the equation where a0 is the bohr radius of the atom and q is the charge of the proton. the electric field due to the hydrogen atom is assumed to be spherically symmetric (a) calculate the θ (theta) component of the electric field (6 pts) (b) calculate the ɸ (phi) component of the electric field (6 pts) (c) calculate the r (radial) component of the electric field (6 pts) (d) what is the change in the magnitude of the electric field if a test point moves from the position (7 pts) to the position problem 7 (25 pts) v (r)

Answers

In light of this, V=V 0 loge (r/r 0 ) Field E= dr dV =V 0(r0r) eE= r mV2 alternatively, reV0r0=rmV2. V=(m eV 0 r 0 ) \ s1 / 2mV=(m e V 0 r 0 ) 1/2 = constant mvr= 2 nh, also known as Bohr's quantum condition or Hermitian matrix.

Show that the eigenfunctions for the Hermitian matrix in review exercise 3a can be normalized and that they are orthogonal.  

Demonstrate how the pair of degenerate eigenvalues for the Hermitian matrix in review exercise 3b can be made to have orthonormal eigenfunctions.

Under the given Hermitian matrix, "border conditions," solve the following second order linear differential equation: d2x/ dt2 + k2x(t) = 0 where x(t=0) = L and dx(t=0)/ dt = 0.

To know more about Hermitian click on the link:

https://brainly.com/question/14671266

#SPJ4

a rocket test sled accelerates at a constant rate of 25 m/s2 from rest while moving along a straight track. the rocket engine turns off instantly when the sled reaches a speed 30 m/s. the sled then moves freely (acceleration

Answers

The total distance that the sled moved is 332.01 m.

How to find the total distance the sled moved?

Total distance s = s1 + s2 + s3

1st Case: Acceleration

u = 0 m/s

v = 37 m/s

a = 25 m/s²

Therefore, using the equation of motion:

[tex]v^{2} - u^{2} = 2as\\s = v^{2} - u^{2}/2a\\s = 37^{2} - 0^{2}/2 * 25\\s = 27.38m[/tex]

2nd Case: No Acceleration

t = 7 s

v = 37 m/s

[tex]s_{2} = v * t\\ s_{2}= 37 * 7 = 259m[/tex]

3rd Case: Deceleration

a = -15 m/s²

u = 37 m/s

v = 0 m/s

Therefore, using the equation of motion

[tex]v^{2} - u_{2} = 2as\\[/tex]

[tex]s = 0^{2} - 37^{2}/2 * -15 = 45.63m[/tex]

Therefore,

S = 27.38 + 259 + 45.63 m = 332.01 m

To learn more about acceleration, refer

https://brainly.com/question/14344386

#SPJ9

a torpedo fired from a submerged submarine is propelled through the water eit ha speed of 20.00m/s and explodes upon impact with a target 2000.0m away. if the sound of the impact in heard 101.4s after the torpedo was fired, what is the speed of sound in water

Answers

The speed of sound in water made by a torpedo with a speed of 20.00m/s and explodes upon impact with a target 2000.0m away is 19.72 m / s

v = d / t

v = Velocity

d = Distance

t = Time

d = 2000 m

t = 101.4 s

v = 2000 / 101.4

v = 19.72 m / s

Velocity of an object is the object's rate of change of position with respect to time. It is mostly denoted as m / s.

Therefore, the speed of sound in water is 19.72 m / s

To know more about velocity

https://brainly.com/question/19979064

#SPJ1

A string tied to a rock is being twirled around Fred's head at . If the rock has a mass of 500 g and the string is 50 cm long, what is the tension in the string?
247 N
15.7 N
2467 N
6.25 N

Answers

A. The tension in the string being twirled around Fred's head is 247 N.

What is the centripetal acceleration of the rock?

The centripetal acceleration of the rock twirled around Fred's head is calculated as follows.

a = ω²r

where;

a is the centripetal accelerationω is the angular velocity of the rockr is the radius of the circular path

The angular velocity of the rock = 5 rev/s x 2π rad/rev = 10π rad/s = 31.42 rad/s

Substitute the value of the angular velocity and radius of the circular path and calculate the centripetal acceleration.

a = (31.42)² x (0.5)

a = 493.6 m/s²

The tension in the string = ma

                                         = (0.5 kg) x (493.6 m/s²)

                                          = 246.8 N ≈ 247 N

Learn more about centripetal acceleration here: https://brainly.com/question/79801

#SPJ1

The complete question is below:

A string tied to a rock is being twirled around Fred's head at 5 cycles/s . If the rock has a mass of 500 g and the string is 50 cm long, what is the tension in the string?

What is the magnitude of the relative angle φ
with which the ski jumper hits the slope?

Answers

The magnitude of the relative angle φ with which the ski jumper hits the slope

φ=14.08

This is further explained below.

What is the magnitude of the relative angle?

Generally, the equation for time is mathematically given as

[tex]t = \frac{(2V tan \theta)}{g} \\\\t = \frac{2 * 24 * tan 59}{9.8}[/tex]

t = 8.152 s

The formula will now provide the slope of the flight path at the time of impact;

tan = V y / V x

V_y = 9.8 * (8.152)

V_y= 78.89 m/s

In conclusion,

[tex]tan \alpha = \frac{78.89}{24}[/tex]

[tex]tan \alpha = 3.2871[/tex]

[tex]\alpha= 73.08°[/tex]

Hence

φ=[tex]\alpha - \theta[/tex]

=73.08-59

φ=14.08

Read more about the magnitude of the relative angle

https://brainly.com/question/19522133

#SPJ1

The complete question is;

A ski jumper travels down a slope and leaves the ski track moving in the horizontal direction with a speed of 24 m/s. The landing incline below her falls off with a slope of θ = 59◦ . The acceleration of gravity is 9.8 m/s².

What is the magnitude of the relative angle φ with which the ski jumper hits the slope? Answer in units of ◦

a charged particle a exerts a force of 2.62 n to the right on charged particle b when the particles are 13.7 mm apart. particle b moves straight away from a to make the distance between them 17.7 mm. what vector force does particle b then exert on a?

Answers

The force that the particle A exerts on the particle B, which is still to the right of it, points to the left.

What does a vector mean?

A measurement with both magnitude and direction. It is often represented by an arrows whose length is proportional to the size of a quantity and whose orientation is the same as that of the quantity. An vector does not even have position, while having direction and magnitude.

Briefing:

Lets look at the ratio of the forces of the same charges but at different distances

[tex]$\frac{F_1}{F_2}=\frac{k_e \frac{q_{A q_B}}{r_1^2}}{k_e \frac{q_A q_B^2}{r_2^2}}$[/tex]

[tex]$\frac{F_1}{F_2}=\frac{r_2^2}{r_1^2}$[/tex]

Pugging in our given values we get the force F2 as:

[tex]$F_2=\frac{r_1^2}{r_2^2} F_1$[/tex]

=(13.7mm)2/(17.7mm)2(2.62N)

=1.57 N

The force that the particle A exerts on the particle B, which is still to the right of it, points to the left.

To know more about vector visit:

https://brainly.com/question/13322477

#SPJ9

what instrument is used to measure electromotive force​

Answers

Answer:

Voltmeter

Explanation:

Voltmeter is used to measure both terminal potential difference as well as electromotive force (e.m.f.) depending upon the connection state of the battery or cell.

-Three positive things about meditation?

-Why is it important?

-Three reasons why you should not eat junk food?

Answers

There are three positive things about meditation:

Gaining a new perspective on stressful situations.Building skills to manage your stress.Increasing self-awareness.

Meditation helps you manage anxiety, stress, and depression.

There are three reasons you should not eat junk food:

One of the most common and perceivable effects of junk food is a rise in obesity in an individual.Learning and memory problems. Loss of appetite and digestion.  

Meditation can increase alertness and focus but extremes can lead to insomnia and other sleep disorders. I also found it high Meditation is the habitual process of training the mind to focus and redirect one's thoughts. Meditation is growing in popularity as more people discover its many health benefits. You can use it to increase awareness of yourself and those around you.

Learn more about Meditation here:-https://brainly.com/question/7289785

#SPJ1

A movie stunt driver on motorcycle speeds horizontally off a 13 m high cliff at a speed of 20.8 m/s. How far (dx) from the base of the cliff will he land?

Use g= 9.8 m/s2 for the acceleration due to gravity.

Round your answer to two decimal places.

Answers

The horizontal displacement of the stunt diver from the base of the cliff is 33.9 m

What is time of motion?

The time of motion of an object is the time taken for the object to travel from its initial position to the final position.

The time taken for the stunt diver to travel down the given height is calculated as follows;

h = vt + ¹/₂gt²

where;

v is the initial vertical velocity of the stunt diver =  0g is acceleration due to gravityt is the time of motion of the stunt diverh is height of fall

h = ¹/₂gt²

2h = gt²

t² = 2h/g

t = √(2h/g)

t = √(2 x 13 / 9.8)

t = 1.63 seconds

The horizontal distance travelled by the stunt diver is calculated as follows;

X = Vₓt

where;

X is the horizontal distance of the stunt diverVₓ is horizontal speed of the stunt divert is the time of motion

X = 20 .8 m/s  x  1.63 s

X = 33.9 m

Thus, the displacement of the stunt diver from the base of the cliff is 33.9 m.

Learn more about horizontal distance here: https://brainly.com/question/24784992

#SPJ1

Jacob has 10 cars for his train. when they are all used, the train cannot make it up the hill. explain what jacob could do to answer this question: how many cars can the train pull up the hill?

Answers

To answer the question effectively, Jacob should use trail and error as a method. When doing so, he should be reducing the number of cars loaded in the train one after the other until he successfully make the train pull up the remaining cars.

For Jacob to answer this question and to find the number of cars that the train can pull up the hill, he should use a method know as trial and error. With the method, Jacob would want to decrease the number of cars loaded in the train one after the other, and should be pulling the train up after every trail.

The number of cars loaded in the train can be decreased by one for each case Jacob makes an attempt up to the time he successfully make the train pull up the hill.

Learn more about trial and error method here:

https://brainly.com/question/17239960

#SPJ4

Which of the following values are vectors:

I. Instantaneous velocity
II. Distance traveled
III. Average acceleration

Answers

Instantaneous velocity and Average acceleration are vectors. Hence, the correct options are (I) and (II).

The instantaneous velocity is a quantity that shows us how quickly an object is moving at any point along its path. The time between the two events approaches zero when the average velocity between two points on the path reaches a certain limit. Instantaneous velocity is a vector with a dimension of length per time, similar to average velocity.

The rate at which the velocity changes is known as the average acceleration vector. It moves in the direction of the velocity change, v. The rate at which a velocity is changing over time is called acceleration. Acceleration is also a vector quantity and must take into account changes in both the magnitude and direction of a velocity. Because velocity has both magnitude and direction, it is referred to as a vector quantity.

To learn more about Vector and Scalar quantities, refer to the answer below:

https://brainly.com/question/26044328

#SPJ1


A skateboarder traveling at 7.0 meters per second rolls to a stop at the top of a ramp in 3.0
seconds. What is the skateboarder's acceleration?

Answers

The acceleration of the skateboarder is calculated out to bbe -2.33 m/s^2, when travelled at 7 meters per second.

What is acceleration and how it calculated out to be -2.33 m/s^2?As we have studied earlier also acceleration is the measure of change in velocity per unit time.Here is given the initial velocity 7 m/s , it is coming to a stop at the top of a ramp . And the time is given 3 seconds.Using the equation a = final velocity - initial velocity / time , we get the acceleration to be -2.33 m/s^2.The skateboarder's acceleration when travelled at 7 meters per second rolls to a stop at the top of a ramp in 3 seconds is calculated out to be -2.33 m/s^2.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ13

which organism in this food web is an ominovere

Answers

Answer:

Omnivores generally occupy the third trophic level alongside meat-eating carnivores. Omnivores are a diverse group of animals.

Explanation:

Examples of omnivores include bears, birds, dogs, raccoons, foxes, certain insects, and even humans.

A catapult shoots an object 1.65m at an initial velocity 15m/s. It is in the air for 0.33s What was their initial angle of launch?​

Answers

With the use of the formula below, their initial angle of launch was 26.2°

What is a Projectile ?

A projectile is any object that is projected into the air which take a trajectory path.

Given that a catapult shoots an object 1.65m at an initial velocity 15m/s. It is in the air for 0.33s. Their initial angle of launch can be calculated by using the formula

h = usinФt - 1/2gt²

Where

h = 1.65 mu = 15 m/st = 0.33sФ = ?

Substitute all the parameters into the formula

1.65 = 15sinФ × 0.33 - 1/2 × 9.8 × 0.33²

1.65 = 4.95sinФ - 0.5336

Collect the like term

4.95SinФ = 1.65 + 0.5336

4.95SinФ = 2.184

SinФ = 2.184/4.95

SinФ = 0.4411

Ф = [tex]Sin^{-1}[/tex](0.4411)

Ф = 26.2°

Therefore, their initial angle of launch was 26.2°

Learn more about Projectile here: https://brainly.com/question/24216590

#SPJ1

State the similarities between thermonic emissions and liquid vapourization

Answers

What thermonic emissions and liquid vaporization have in common is that the particles involved both processes evaporates by the application of heat.

Understanding thermal or heat of vaporization of liquid

The amount of heat energy which is needed by just 1 gram of a liquid substance to boil without being affected by change in temperature.

However, when the thermal liquid of vaporization decreases as temperature increases. It is also affected by intermolecular forces.

Thermonic emissions refers to those electrons which are produced by the application of heat energy.

In conclusion, the major similarity in the task above is that they evaporated by heat.

Read more on vaporization:

https://brainly.com/question/24258

#SPJ1

Which of the following statements about conservation of mass is true?

Answers

The correct statement from above about the conservation of mass is: mass is conserved in both physical and chemical changes.

The correct answer choice is option c.

Understanding why mass mass is conserved in both physical and chemical changes.

It follows that the law of conservation of mass states that: " matter can neither be created nor destroyed but changes from one form to another ". From this statement of the atomic theory, it then means that the mass of any substance remains the same in any state of matter, physical changes, chemical changes, before reaction and after reaction. Mass is neither created not destroyed.

The mass of matter is the same through out in both physical and chemical changes.

Read more on mass:

https://brainly.com/question/24236159

#SPJ1

If the output work is 500 J and the input work is 380 J, what is the machine efficiency?

Answers

Answer:

Therefore machine efficiency is 131.6%.

Explanation:

Data

work output = 500J

work input = 380J

M.E = ?

M.E = work output/work input × 100%

M.E = 500J/380J × 100%

M.E = 131.6%

Therefore machine efficiency is 131.6%.

bryan allen pedaled a human-powered aircraft across the english channel from the cliffs of dover to cap gris-nez on june 12, 1979. (a) he flew for 169 min at an average velocity of 3.53 m/s in a direction 45° south of east. what was his total displacement? (enter the magnitude in km and the direction in degrees south of east.)

Answers

The total displacement is 3.58 kilometers to the south of the east. An object's total change in position is referred to as displacement, a vector variable that measures "how far out of place an object is."

A scalar quantity known as distance measures "how much ground an object has traversed" while moving. An object's total change in position is referred to as displacement, a vector variable that measures "how far out of place an object is. These factors provide the overall displacement: where,

The average speed is v.

Time has come.

The typical speed is:

v = 3.53 m/s

While the time must be changed from minutes to seconds:

t=169*60

=10140s.

Consequently, the displacement's size is

=3.53*10140

=35794 m

=3.58 km

Furthermore, since the direction and speed are identical, the direction is 45° south of east.

Learn more about Displacement here-

https://brainly.com/question/11934397

#SPJ4

HELP THIS IS DUE TODAY who ever answers first (correctly and gives explanation will get brainly)


How much power does a cordless phone use if it draws 0.50 A of current at 6.0 V?
i need it in watts so please write it in forms of Watt

Answers

Answer:

3.0 W

I actually had this question before BUT I have no clue how to explain it. I haven't done this in so long. I apologize but that is the correct answer.

Answer:3.0 W

Explanation:

P=VI

P= (6.0 V) (5.0 A)

P= 3.0 W

Write the differences between normal forces and tension with suitable examples.​

Answers

A Normal Force is a force applied in the direction perpendicular to the surface that the force is applied to. An example of this is putting pressure directly down on a table with your hand.

A Tension Force is a force applied in the opposite direction of the object the force is applied to. Tension Forces usually are applied by springs, ropes, and wires. An example of this is a wrecking ball hanging from a crane. There is a Tension Force on the wrecking ball holding it up in the air.

These forces are different from one another based on their directions that the forces are applied. Forces are vectors, so their magnitude is determined by the amount of force applied and their direction. Tension Force can be a Normal Force, but Normal Forces are not always Tension Forces.

An investor purchased 50 shares of
stock in a company for $20 per
share. One year later, the investor
sold all the shares for $925. What is
the investor's rate of return?
A. 7.5%
C. -7.5%
B. -8.1%
D. 8.1%

Answers

Answer:

B

Explanation:

PLEASE THIS IS URGENT!!! I'M STUCK ON THIS QUESTION AND THIS IS MY LAST RESORT!!!!! How do mass and distance affect the gravitational pull of an object?

Answers

Answer: The force of gravity depends directly upon the masses of the two objects, and inversely on the square of the distance between them. This means that the force of gravity increases with mass, but decreases with increasing distance between objects.

Explanation: Hope this helps. : )

A young girl sleds across a snowy field. calculate the magnitude of the friction force she experiences if her mass if 35 kg, the sled's mass is 50kg, and the coefficient of of friction with the snow is 0.220

Answers

The magnitude of the friction force she experiences=> f=  183.26 N.

friction force isthe force which opposes the motion of an object.

Total mass= 50 + 35 kg=85 kg

g= 9.8 m/s²

coefficient of friction with the snow (ц)=0.220

the friction force acting here is kinetic friction force, which is product of coefficient of friction and force acting on it which is mass × acceleration due to gravity.

the magnitude of the friction force= kinetic friction acting here=ц m g

                                   f = 0.220 × 85 kg × 9.8

                                   f=  183.26 N

friction force acting here is =  183.26 N.

LEARN MORE ABOUT FRICTION-

https://brainly.com/question/20241845

#SPJ4

Other Questions
what number taken off 20% equals $304 Most Geologists and other scientists believe that the world is approximately:4.5million years old 450 million years old 4.5 billion years old 45 thousand years old in the pic............. if a check correctly written and paid by the bank for $419 is incorrectly recorded in the company's books for $491, how should this error be treated on the bank reconciliation? When it comes to owning a hotel, there are a variety of options for ownership such as franchising, independent lodging, REITs, management contracts, and vacation ownerships or timeshares. Briefly explain each of these, highlighting the disadvantages and advantages of each. Which would you choose? Why? 1. Describe how changing the rotors' power and speed allow the drone to moveleft or right. According to Napoleon, who deserved the credit for Frances successful conquest of Europe?the Roman armyAlexander and Hannibalthe French ArmyNapoleon The second angle of a triangle is 10 more than the first angle. The third angle is three times the first. Find the three angles.First angle:Second angle:Third angle: what is the median 72 73 75 76 76 79 83 85 can yall help what is the least important amendment and why at least 2 paragraphs how did the cultivation of wild plants change the lives of people in Louisiana how to divide 306.67 and 254.00 i rlly need help i have a project due tmr. Match the following. (NEED HELP ASAP)The table shows the air pressure in pounds per square inch at different altitudes in thousand feetAltitude (thousand feet)5 10 15 20 25 30 35 40 45Air pressure (pounds per square inch) 12.4 10.2 7 62 52 42 34 26 20Which scatter plot best represents the data in the table? A serving of rice is 5/6 of a cup. How many servings are there in a 3 1/3 cup bag of rice? 3. Allison Separates 23 stickers into 4 4 equal piles. How many stickers does she have left over? why is microwave explosive How you would solve the problem or address the issue? Be specific. Please include dialogue to express your thoughts if it seems appropriate and makes sense with the given situation.If you feel that there are several ways to handle any of the scenarios, please discuss all options.What, if any, tips or steps from the unit (gather relevant info, identify alternatives, weigh evidence, make a choice and take action, accept the outcome) did you use in order to reach your solution/decision? Be specific and explain.You are the manager of a small marketing company. One of your employees is dressing inappropriately for an office setting. Other employees are complaining that it is distracting them from their work. You have spoken to the employee about this issue twice, and nothing has changed. The employee is a solid worker and their inappropriate dress is the only issue that you have with them.What do you do? You thought you had finished 35 pages, but you actually read 32 Pages. What was your percent error? the ancient Egyptians made many important contributions to the ancient river civilizations. Carefully consider all these contributions. Then, follow the steps below to complete the chart. Choose five important contributions of the ancient Egyptians.Describe each contribution.Explain how each contribution is still used in the world today.CONTRIBUTIONDESCRIPTIONEXAMPLEUSE IN WORLD TODAY