a ball of mass 0.140 kg moving with speed of 1.72 m/s hits a wall and bounces back with the same speed in the opposite direction. what is the change in the ball's kinetic energy?

The average speed for the remainder of the journey is 15km/h.

Average speed of a moving body can be calculated by dividing the distance moved by the object by the time taken to complete the distance as follows;

Average speed = distance/time

According to this question, a car must be driven a distance of 120 km in 2.5 h, however, during the first 1.5 h, the average speed was 70 km/h.

First, the initial distance moved must be calculated as follows:

Distance = 1.5 hours × 70km/h = 105km

The remaining distance = 120km - 105km = 15km

Average speed for this remaining distance = 15km ÷ 1hr = 15km/h.

Learn more about average speed at: https://brainly.com/question/9834403

#SPJ1

Solar constant never change, and hence there is no change in shortwave as well as longwave radiation by the earth's atmosphere

Solar constant is the rate at which the solar energy from the sun intercepts the earth's surface. It's value is 1,338watts per square meter.

Long wave radiation is a type of radiation emitted from earth whose wavelength ranges from 4 to 30 micrometers. While shortwave radiation is the radiant energy which is produced by the sun whose wavelength ranges from infrared to ultraviolet through visible.

We know that solar constant never change (constant), and the amount of shortwave that reaches the earth's atmosphere is called solar constant. As the solar constant does not change, there will be no change in shortwave as well as longwave radiation by the earth's atmosphere.

Learn more about solar constant here:

https://brainly.com/question/28828522

#SPJ4

Displacement = 1/2(Initial Velocity + Final Velocity)Time

If we plug in the values (0 as initial velocity, 12.5 as final velocity, 7 as time), we get 43.75 meters.

According to the given condition we are 137 meters behind the origin. That would mean our initial displacement is -137 meters. After driving for 7 seconds, the car would be 43.75 meters closer to the origin.

-137 + 43.75 = - 93.25 meters (or 93.25 meters behind the origin).

The reason for this is that at a specific area, the acceleration brought on by gravity is constant. Lighter items are not accelerated more slowly by gravity than heavy ones.

The following are possible gravity values for the gravitational force between the earth (mass M) and an object of mass m:

F = GMm/r2 with r being the separation.

Now form Newton's second law,

F = ma where a is the acceleration.

Equating the two, ma= GMm/r2

a= GM/r2

This demonstrates that the mass m of the object being propelled is independent of the acceleration caused by gravity for some object (the mass M).

Additionally, the earth's gravitational pull causes free fall. This explains why there is a constant acceleration from gravity.

To know more about gravity click on the link:

https://brainly.com/question/4014727

#SPJ4

The mass of the receiver is 103.261 kg.

Assume that m is the receiver's mass.

Prior momentum =(125*4.2)-m*0

After =2.3(125+m) momentum

525=287.5+2.3m

m=237.5/3.3

m=103.261kg

So, the mass of the receiver is 103.261kg.

To know more about mass click on the link:

https://brainly.com/question/19694949

#SPJ4

The relative velocity is obtained as 5.3 m/s from the calculation as shown below.

We know that motion refers to the change in the position of an object with time. Give that we know that motion is relative and the position of the two objects that are in motion must always be taken into consideration. In this case, we have the situation in which Timmy and his friends are moving backwards and the runway is moving forward thus they are actually moving in opposite directions as seen.

Let us note that velocity is a vector quantity hence we have to assign the forward direction as positive and the backwards direction as negative. Thus we can then take the relative motion between Timmy and his friend and the walk way can be obtained quite conveniently by the use of;

6.9 m/s - 1.6 m/s  = 5.3 m/s

Learn more about velocity:https://brainly.com/question/18084516

#SPJ1

Taking into account the Boyle's law, Charles's law and Gay-Lussac's law, you get:

Boyle's law states that the volume occupied by a given mass of gas at constant temperature is inversely proportional to the pressure: if the pressure increases, the volume decreases, while if the pressure decreases, the volume increases.

Boyle's law is expressed mathematically as

P×V=k

Considering an initial state 1 and a final state 2, it is fulfilled:

P₁×V₁=P₂×V₂

Charles's Law consists of the relationship between the volume and temperature of a certain amount of ideal gas.

This law says that for a given sum of gas at constant pressure, as the temperature increases, the volume of the gas increases, and as the temperature decreases, the volume of the gas decreases: the volume is directly proportional to the temperature of the gas.

Charles's law is expressed mathematically as:

V÷T=k

Considering an initial state 1 and a final state 2, it is fulfilled:

V₁÷T₁=V₂÷T₂

Gay-Lussac's law determines that gas pressure is directly proportional to its temperature when the volume is constant: when there is a constant volume, when the temperature increases, the gas pressure increases and when the temperature decreases, the gas pressure decreases.

Gay-Lussac's law is expressed mathematically as:

P÷T=k

Considering an initial state 1 and a final state 2, it is fulfilled:

P₁÷T₁=P₂÷T₂

In this case, you know:

Replacing in the Boyle's law:

5 atm× 3.5 L= 6 atm×V₂

(5 atm× 3.5 L)÷ 6 atm= V₂

2.92 L= V₂

Finally, the volume will be 2.92 L.

In this case, you know:

Replacing in Gay-Lussac's law:

2 atm÷ 288 K=P₂÷ 303 K

(2 atm÷ 288 K)× 303 K=P₂

2.104 atm= P₂

Finally, the pressure will be 2.104 atm.

In this case, you know:

Replacing in Charles's law:

6 L÷293 K=4 L÷T₂

(6 L÷293 K)× T₂= 4 L

T₂= 4 L÷ (6 L÷293 K)

T₂= 195.33 K

Finally, the temperature will be 195.33 K.

In this case, you know:

Replacing in the Boyle's law:

5.5 atm× 40 L= 8.2 atm×V₂

(5.5 atm× 40 L)÷ 8.2 atm= V₂

52.38 L= V₂

Finally, the volume will be 52.38 L.

In this case, you know:

Replacing in Gay-Lussac's law:

1.5 atm÷ 291 K= P₂÷ 305 K

(1.5 atm÷ 291 K)× 305 K=P₂

1.43 atm= P₂

Finally, the pressure will be 1.43 atm.

Learn more about Boyle's law, Charles's law and Gay-Lussac's law:

brainly.com/question/4147359

#SPJ1

The time taken for you to cover the same distance on the walkway is 26.6 seconds.

The relative velocity of an object in motion is defined as the velocity of an object with respect to another observer.

The time taken for you to travel the same distance on the walkway with the given speed is calculated as follows;

Assuming you in the same direction as the walkway;

(Va + Vb)t = d

where;

Your speed on the ground is calculated as follows;

Vb = 90 m / 70 s

Vb = 1.286 m/s

Substitute the given parameters and solve for the time taken,

(2.1 m/s + 1.286 m/s)t = 90

(3.386)t = 90

t = 90/3.386

t = 26.6 seconds

Thus, we can conclude that if you maintain your speed on ground, it will take less time to travel the walkway.

Learn more about relative velocity here: https://brainly.com/question/17228388

#SPJ1

An engineer comes to a decision to dampen the oscillations by way of applying one shock absorber to each spring. those surprise absorbers practice a speed‑established drag force these shock absorbers follow a pace-structured drag pressure F = mv that opposes damping the oscillations making use of one surprise absorber to each spring.

Engineers, as practitioners of engineering, are specialists who invent, design, analyze, construct and take a look at machines, complicated structures, systems, devices, and materials to fulfill functional targets and necessities while considering the limitations imposed through practicality, law, safety, and value.

Engineers design, construct, and hold numerous complex systems and systems, from buildings to software programs. while there are many engineering professions, there's one steady engineering mindset: to innovate. A four-year university degree in technical know-how, mathematics, or engineering. Accreditation by an engineering firm comprised of ABET or the Accreditation Board of Engineers and Ers. engineering license. Non-traditional credentials including professional certificates work portfolios and coding.

Learn more about Engineers here:

https://brainly.com/question/4231170

#SPJ1

Answer: Mechanical waves transfer energy from rock to water.

Explanation: The particles of the medium just vibrate in place. As they vibrate, they pass the energy of the disturbance to the particles next to them, which pass the energy to the particles next to them, and so on. Particles of the medium don't actually travel along with the wave.

Answer:

Mechanical Waves

Explanation:

Mechanical waves are waves that require a medium for the transfer of their energy to occur. Water waves are an example of mechanical waves. Tsunami waves released after an earthquake transfer the energy of the quake to distant shorelines.

Hope this helps.

The ratio of friction force to normal force is expressed by the coefficient of friction, a dimensionless number. The platform and button have a friction coefficient of 0.329.

Given that the button's diameter is 0.520 m and its rotational speed is 35.0 rev/min, its distance from the axis is no greater than 0.240 m. This indicates that the button's placement circle's radius R is this.

The calculation for the angular velocity is shown below.

ω=2πf

where f is the revolution's speed.

ω=2*3.14*35/60

ω=3.67 rad/s

The friction coefficient is determined in the manner shown below.

μmg= mω²R

μ=0.329

The friction force between the button and the platform will be equal to the centripetal force acting on the button.

Hence we can conclude that the friction coefficient between the button and the platform is 0.329.

Learn more about Friction here-

https://brainly.com/question/28356847

#SPJ4

Answer:

F = 0.0675 N

Explanation:

The net force under sphere A is the sum of the force made by sphere B with the force made by sphere C.

By Coulomb's Law of force, we have:

F = k * Q*Q/d²

So:

Force (absolute value) of C on A:

F₁₃ = k * Q₁*Q₃/d²

F₁₃ = 9*10⁹ * (2.0*10⁻⁶)*(4.0*10⁻⁶) / (0.80)²

F₁₃ = 9/80 N = 0.1125 N

The vector:

F₁₃ =  0.1125 N  (horizontal direction; pointed to the left side: repulsive)

Force (absolute value) of B on A:

F₁₂ = k * Q₁*Q₂/d²

F₁₂ = 9*10⁹ * (2.0*10⁻⁶)*(3.6*10⁻⁶) / (0.60)²

F₁₂ = 9/50 = 0.18 N

The vector:

F₁₂ = 0.18 N  (horizontal direction; pointed to the right side: attractive)

The net force is F₁₂ - F₁₃:

F = 0.180 - 0.1125

F = 0.0675 N

The average speed and average velocity of the car is 68 km/h and 28 km/h respectively.

The change in position or displacement divided by the time periods during which the displacement occurs is known as average velocity. Based on the direction of the displacement, the average velocity might either be positive or negative. Average speed is the total distance travelled by an object to the total time taken.

The car travels 12 km then 5.0 km north in 0.25 h. The average speed and average velocity is given below.

Average speed = total distance/time

Average speed = (12+5)/0.25 = 68 km/h

Average velocity = displacement/time

Average velocity = (12-5)/0.25 = 28 km/h

To know more about average velocity here:

https://brainly.com/question/862972

#SPJ1

Answer:

Current doesn't surge or travel like water through the body, instead it is the electrons that move and make current. The signals sent inside our body are also in the form of electric current but meager to what is 20,000v means. In this case, the body couldn't survive and the 'current' formed inside the body met with the resistance of flesh, and as result gave heat burns. But above all the electricity doesn't flow, it's the electrons that move and make current inside the body.

Explanation:

Hope this helps.

The displacement of the shopper is 172. 92 m.

"Displacement" describes a change in an object's location. It is a vector quantity since it has a magnitude and a direction. Its emblem is an arrow leading from the starting point to the finishing point. For instance, if an object moves from position A to position B, its position changes.

She travels 165 meters south before turning and traveling a further 55 meters to her left.

If we construct the figure, her displacement will result in the hypotenuse of the triangle.

Therefore according to the question,

Displacement =  √ { ( 165)² +(55 )² }  m

= √(27225 + 3025)  m

=√ 30250 m

= 172. 92 m

To learn more about displacement click on the link below:

https://brainly.com/question/321442

#SPJ9

The value of decreasing current is 0.202m/s.

The relationship between current, voltage, and resistance is known as Ohm's law. German scientist  proposed this connection. Ohm's law is referred to as such because of this. According to this, the voltage or potential difference across many different materials will directly affect how much constant current flows through them. As a result, if the voltage V (measured in volts) between two ends of a wire made of one of these materials is tripled, the current I (measured in amperes) also triples, yet the ratio V/I stays the same. A substance's resistance, measured in ohms, is the product of the ratio V/I for that particular piece of material.

We have given here ,

dV/dt= -0.04, dR/dt= 0.04 , R= 200

I= 0.01

From Ohm's law,

V= IR

dV/dt = IdR/dt + RdI/dt    differentiating with respect to t ,

by applying values and solving it we get ,

dI/dt =-0.000202

Hence current is decreasing at  0.202 mA/s.

To learn more  about Ohm's law refer

https://brainly.com/question/1247379?

#SPJ9

Various shapes are predetermined as then the student tries to cut them. As the shapes are cut, the magnitude of force required is measured.

The term force is defined as that which causes an object to move or to change its direction. A force is typically a push or a pull. We could measure the applied force by the use of a Dynamometer .

In this case, we could determine the various shapes that we want to cut and then try to cut them. As we are cutting the shapes, we could now use the Dynamometer  to determine the force applied.

Learn more about force:https://brainly.com/question/13191643

#SPJ1

Answer:

I think it's 5.00 N

Explanation:

If a gas of hydrogen atoms lies between you (your telescope + spectrograph) and a continuum light source, it will create an absorption line spectra, and if viewed from a different angle, an emission line spectrum.

Absorption lines allude to the propensity of cool atmospheric gas to absorb the same lines of light, whereas emission lines refer to the fact that burning hot gas produces lines of light.

Some of the light at specific wavelengths is scattered when it travels through the atmosphere's gas, producing darker bands. The wavelengths of light released when common materials were heated to form lines that became known as "spectral lines" were recorded.

To know more about wavelengths click on the link:

https://brainly.com/question/13533093

#SPJ4

Leptin is released by adipocytes, and I predict that the levels of leptin would be decreased in Nicole when compared to a healthy, female adult of similar age and weight.

The body regulates itself in two ways, neural signals and hormones. Hormones are chemical messengers released by endocrine glands into the blood stream that carry out a particular function in the body. The hormone that regulates appetite and body weight is leptin.

Leptin is released by fat storing cells in the body called adipocytes. The word 'leptin' comes from a Greek word 'leptos' meaning 'fat controller', perfectly fitting its function. Since leptin is stored in the fat tissues, a person's weight has a direct effect on the levels of leptin in a person. When we lose weight, the amount of leptin circulating in the body decreases, leading to more appetite and weight gain.

A lack of leptin in the body, arising from genetic diseases results in uncontrolled appetite and obesity. Generally, female adults also produce less leptin than male adults

Learn more about leptin here:

https://brainly.com/question/13076866

#SPJ4

According to the given figures pulley B requires the least

amount of force to lift the weight .

In order to move and change the direction of a taut cable or belt, or to transfer power between the shaft and cable or belt, a pulley is a wheel on an axle or shaft. an object that can be lifted or lowered by pulling a chain, rope, or belt across a wheel.

In order to work, elevators require numerous pulleys. A pulley system is a cargo lift device that enables lifting of cargo to higher floors. In wells, the bucket is lifted out of the well using a pulley system. several different Compound, moveable, and fixed pulleys are the three basic categories. Wheel and axle on a fixed pulley are fixed.

To know more about pullies ,visit:

https://brainly.com/question/13752440

#SPJ9

The first and second marble have the same speed at the bottom.

We need to know about the conservation of energy to solve this problem. The energy can not be created or destroyed, the only way is to change to another form. It can be written as

Ei = Ef

where Ei is initial energy and Ef is the final energy

The potential energy of the first marble is the same as the second marble because they have the same height. According to conservation of energy, the potential energy will be converted to kinetic energy and the speed of the marbles will same at the bottom.

Find more on conservation of energy at: https://brainly.com/question/166559

#SPJ4

According to the given statement The total work done on the crate in 17.57 J.

When a force is applied to an item, it is deemed to have "done work" if the object travels a distance in the direction of the force. The result of force and displacement are the same. Displacement times Force equals work.

Mass of the crate, m = 66kg

Force applied by the worker, F = 3.9 N

Angle to the horizontal, θ = 39°,

Distance moved by crate, d=5.8m

Work = Force * Displacement

Total work done on the crate

W = Fcosθ × d

W = 3.9× cos 39 × 5.8

W = 17.57 J

To know more about Work done visit:

https://brainly.com/question/13662169

#SPJ10

An example from my house or neighborhood that represents a physical change occurring is Breaking my mum's favorite drinking glass and melting of ice block to liquid.

The material involved in a physical change has the same structural properties before as well as after the change. Texture, shape, as well as temperature, and an alteration in the state of matter are examples of a lot of physical changes.

Since Physical changes to matter are those that take place without altering their chemical makeup.

Therefore, Note that by breaking the glass, it is broken down to smaller pieces, which can still be glued together and its revisable.

Learn more about physical change from

https://brainly.com/question/960225
#SPJ1

The final velocity of Krystal who accelerated at 0.36m/s² for the final 15.0 s, having an initial velocity of 11.0m/s is 16.4m/s.

Velocity is simply the speed at which an object moves in a particular direction.

Acceleration is the rate of change of the velocity of a particle or object with respect to time.

From the first equation of motion;

v = u + at

Where v is final velocity, u is initial velocity, a is acceleration and t is time elapsed.

Given the data in the question;

To determine Krystal's final velocity, plug the given values into the equation of motion above and solve for v.

v = u + at

v = 11.0m/s + ( 0.36m/s² × 15.0s )

v = 11.0m/s + ( 0.36ms/s² × 15.0 )

v = 11.0m/s + ( 0.36m/s × 15.0 )

v = 11.0m/s + 5.4m/s

Final velocity v = 16.4m/s

Therefore,  Krystal's final velocity for the final 15.0 seconds is 16.4m/s.

Learn more about Equations of Motion: brainly.com/question/18486505

#SPJ1

The speed in meter per second of Peter, given that he drove 150 meters in 18 seconds is 8.33 m/s

We know that speed is defined as the distance travelled per unit. It can be expressed as:

Speed = distance / time

With the above formula, we can obtain the speed of Peter. Details below

From the question given, the following were obtained:

Speed = distance / time

Speed = 150 / 18

Speed = 8.33 m/s

From the calculation made above, the speed is 8.33 m/s

Learn more about speed:

https://brainly.com/question/1861559

#SPJ1

The pressure exerted by the concrete cylinder is 2.60 pound/in².

We need to know about the pressure to solve this problem. Pressure is a unit that describes how much force is applied to a surface area. It can be determined as

P = F / A

where P is pressure, F is force and A is area.

From the question above, we know that

F = 375 pound

A = 144 in²

By substituting the given parameters, we can calculate the pressure

P = F / A

P = 375 / 144

P = 2.60 pound/in²

Thus, the pressure should be 2.60 pound/in².

Find more on pressure at: https://brainly.com/question/25965960

#SPJ4

In this case, anaerobic metabolism is utilized.

The process of producing ATP anaerobically, also known as without oxygen or in the absence of oxygen, involves the direct phosphate transfer from phosphorylated intermediates like creatine phosphate or glycolytic intermediates to ADP, which in turn produces ATP.

Lactic acid builds up as a result of the anaerobic metabolism of glucose, which causes metabolic acidosis. A base deficit results from the reaction between lactic acid and bicarbonate, which lowers serum bicarbonate levels.

Anaerobic metabolism only produces two ATP molecules for every glucose molecule while aerobic metabolism produces more ATP and depends on oxygen.

To know more about anaerobic metabolism visit:

https://brainly.com/question/15464346

#SPJ9

A tool used to gauge wind direction and speed is an anemometer. It is a typical piece of weather station equipment. Any instrument used to measure wind speed in meteorology is referred to by this name, which is derived from the Greek word anemos.

Vane anemometers, thermal anemometers, thermal anemometers with velocity/temperature profiling, and cup anemometers are the four most widely used anemometer types.

The majority of the time, anemometers are categorized as constant-temperature or constant-power anemometers.

To calculate wind speed is as follows: Anemometer factor x instantaneous shaft speed equals instantaneous wind speed.

Average Wind Speed is calculated as follows: Anemometer Factor x (Time / Turns)

The force that the wind applies to a structure (or, really, any object) is known as wind pressure. The anemometer's cups rotate as the wind blows, spinning the centre rod. The rod spins more quickly the stronger the wind blows. The anemometer measures the revolutions, or turns, from which wind speed is determined.

To know more about anemometer , click on the link below:

https://brainly.com/question/24939205

#SPJ9

Answer:

give the main question as I can not see the information