A bullet is accelerated in the muzzle of a gun from rest to 150 m/s in 0.50sec. What is the acceleration?

Answers

Answer 1

Answer:

Bullets are cylindrical metal projectiles shot from firearms. Their main function is to kill or otherwise incapacitate. They come in numerous varieties for use in handguns, rifles, and machine guns. There is also special ammunition capable of penetrating armor, firing underwater, or firing "silently" at subsonic speeds. However, their designs are all basically the same. A typical cartridge consists of four components: the cartridge case, primer, propellant charge and bullet. When a gun trigger is pulled, the primer is struck, igniting the propellant. This causes a rapid expansion of gas, which forces the bullet forward and ejects the casing. Contrary to popular belief, guns are not loaded with bullets, but cartridges, and they fire bullets (since bullets are a more common term and the actual objects responsible for harm, they receive the recognition).

While small in size (the most popular handgun bullet is 9 mm in diameter) bullets posses enough kinetic energy to cause serious damage. Using a kinematics formula, it is possible to determine the acceleration of a bullet when the muzzle velocity and barrel length of a gun are known.

v2 = vo2 + 2as

Where

v is the muzzle velocity

vo is the initial velocity of the bullet, which is zero

a is the acceleration

s is the barrel length

Since acceleration is the desired value, the derived formula is this:

equation

When fired from a Beretta 92S, the standard issue US Army pistol, a 9 mm Parabellum bullet has a muzzle velocity of 335 m/s. With its 127 mm barrel length, the bullet's acceleration is calculated to be 4.4 × 105 m/s2.

The acceleration of a bullet depends largely on the gun from which it is fired, along with the intent of the user. Pistol bullets generally feature a lower acceleration than rifles or machine guns. Also, individuals involved with clandestine operations may use firearms with silencers, which suppress bullet speed and require special subsonic ammunition.

Remember, guns don't kill people. Bullets do. To paraphrase Chris Rock in Bigger, Blacker and Uncut, if bullet prices were raised to $5,000 each, there would be a drastic decrease in murders [mp3].


Related Questions

a student is skateboarding down a ramp that is 6.0 meters long and is inclined at 28 degrees with respect to the horizontal. The ramps coefficient of friction is 0.323. The initial speed of the skateboarder at the top of the ramp is 2.6 m/s. What is the skateboarders speed at the bottom of the ramp? (Hint: Find acceleration)

Answers

No body knows duh duh sun

What is the magnitude of the relative angle φ
with which the ski jumper hits the slope?

Answers

The magnitude of the relative angle φ with which the ski jumper hits the slope

φ=14.08

This is further explained below.

What is the magnitude of the relative angle?

Generally, the equation for time is mathematically given as

[tex]t = \frac{(2V tan \theta)}{g} \\\\t = \frac{2 * 24 * tan 59}{9.8}[/tex]

t = 8.152 s

The formula will now provide the slope of the flight path at the time of impact;

tan = V y / V x

V_y = 9.8 * (8.152)

V_y= 78.89 m/s

In conclusion,

[tex]tan \alpha = \frac{78.89}{24}[/tex]

[tex]tan \alpha = 3.2871[/tex]

[tex]\alpha= 73.08°[/tex]

Hence

φ=[tex]\alpha - \theta[/tex]

=73.08-59

φ=14.08

Read more about the magnitude of the relative angle

https://brainly.com/question/19522133

#SPJ1

The complete question is;

A ski jumper travels down a slope and leaves the ski track moving in the horizontal direction with a speed of 24 m/s. The landing incline below her falls off with a slope of θ = 59◦ . The acceleration of gravity is 9.8 m/s².

What is the magnitude of the relative angle φ with which the ski jumper hits the slope? Answer in units of ◦

-Three positive things about meditation?

-Why is it important?

-Three reasons why you should not eat junk food?

Answers

There are three positive things about meditation:

Gaining a new perspective on stressful situations.Building skills to manage your stress.Increasing self-awareness.

Meditation helps you manage anxiety, stress, and depression.

There are three reasons you should not eat junk food:

One of the most common and perceivable effects of junk food is a rise in obesity in an individual.Learning and memory problems. Loss of appetite and digestion.  

Meditation can increase alertness and focus but extremes can lead to insomnia and other sleep disorders. I also found it high Meditation is the habitual process of training the mind to focus and redirect one's thoughts. Meditation is growing in popularity as more people discover its many health benefits. You can use it to increase awareness of yourself and those around you.

Learn more about Meditation here:-https://brainly.com/question/7289785

#SPJ1

An investor purchased 50 shares of
stock in a company for $20 per
share. One year later, the investor
sold all the shares for $925. What is
the investor's rate of return?
A. 7.5%
C. -7.5%
B. -8.1%
D. 8.1%

Answers

Answer:

B

Explanation:

a single loop of wire with an area of 9.01×10−2 m2 is in a uniform magnetic field that has an initial value of 3.65 t , is perpendicular to the plane of the loop, and is decreasing at a constant rate of 0.197 t/s .

Answers

(a) The electromotive force induced in the loop is 0.017 V.
(b) The ratio of induced electromotive force  to loop resistance yields the current in the circuit.

How can we calculate emf induced in a loop?
The emf induced in the loop can be calculated using Faraday's law:
emf = dФ/dt ⇒ emf = A * (dB/dt)
where A represents the area of the loop and dB/dt is the change in magnetic field with time.

Therefore, using the above relation, emf induced= 0.0901 * 0.197= 0.017V
Again, using Ohm's law the current in the loop can be determined since
Current = emf/Resistance.

Thus,
(a) The electromotive force induced in the loop is 0.017 V.
(b) The ratio of induced electromotive force  to loop resistance yields the current in the circuit.

To learn more about it, tap on the link below:
https://brainly.com/question/13744192

#SPJ9
 

A string tied to a rock is being twirled around Fred's head at . If the rock has a mass of 500 g and the string is 50 cm long, what is the tension in the string?
247 N
15.7 N
2467 N
6.25 N

Answers

A. The tension in the string being twirled around Fred's head is 247 N.

What is the centripetal acceleration of the rock?

The centripetal acceleration of the rock twirled around Fred's head is calculated as follows.

a = ω²r

where;

a is the centripetal accelerationω is the angular velocity of the rockr is the radius of the circular path

The angular velocity of the rock = 5 rev/s x 2π rad/rev = 10π rad/s = 31.42 rad/s

Substitute the value of the angular velocity and radius of the circular path and calculate the centripetal acceleration.

a = (31.42)² x (0.5)

a = 493.6 m/s²

The tension in the string = ma

                                         = (0.5 kg) x (493.6 m/s²)

                                          = 246.8 N ≈ 247 N

Learn more about centripetal acceleration here: https://brainly.com/question/79801

#SPJ1

The complete question is below:

A string tied to a rock is being twirled around Fred's head at 5 cycles/s . If the rock has a mass of 500 g and the string is 50 cm long, what is the tension in the string?

a torpedo fired from a submerged submarine is propelled through the water eit ha speed of 20.00m/s and explodes upon impact with a target 2000.0m away. if the sound of the impact in heard 101.4s after the torpedo was fired, what is the speed of sound in water

Answers

The speed of sound in water made by a torpedo with a speed of 20.00m/s and explodes upon impact with a target 2000.0m away is 19.72 m / s

v = d / t

v = Velocity

d = Distance

t = Time

d = 2000 m

t = 101.4 s

v = 2000 / 101.4

v = 19.72 m / s

Velocity of an object is the object's rate of change of position with respect to time. It is mostly denoted as m / s.

Therefore, the speed of sound in water is 19.72 m / s

To know more about velocity

https://brainly.com/question/19979064

#SPJ1

the volume of a stone having an irregular shape can be measured (a) meter rule (b) measuring cylinder (d) vernier calliper (d) micrometer screw guage​

Answers

Answer:

B) Measuring cylinder

Explanation:

Which of the following statements about conservation of mass is true?

Answers

The correct statement from above about the conservation of mass is: mass is conserved in both physical and chemical changes.

The correct answer choice is option c.

Understanding why mass mass is conserved in both physical and chemical changes.

It follows that the law of conservation of mass states that: " matter can neither be created nor destroyed but changes from one form to another ". From this statement of the atomic theory, it then means that the mass of any substance remains the same in any state of matter, physical changes, chemical changes, before reaction and after reaction. Mass is neither created not destroyed.

The mass of matter is the same through out in both physical and chemical changes.

Read more on mass:

https://brainly.com/question/24236159

#SPJ1

HELP THIS IS DUE TODAY who ever answers first (correctly and gives explanation will get brainly)


How much power does a cordless phone use if it draws 0.50 A of current at 6.0 V?
i need it in watts so please write it in forms of Watt

Answers

Answer:

3.0 W

I actually had this question before BUT I have no clue how to explain it. I haven't done this in so long. I apologize but that is the correct answer.

Answer:3.0 W

Explanation:

P=VI

P= (6.0 V) (5.0 A)

P= 3.0 W


A skateboarder traveling at 7.0 meters per second rolls to a stop at the top of a ramp in 3.0
seconds. What is the skateboarder's acceleration?

Answers

The acceleration of the skateboarder is calculated out to bbe -2.33 m/s^2, when travelled at 7 meters per second.

What is acceleration and how it calculated out to be -2.33 m/s^2?As we have studied earlier also acceleration is the measure of change in velocity per unit time.Here is given the initial velocity 7 m/s , it is coming to a stop at the top of a ramp . And the time is given 3 seconds.Using the equation a = final velocity - initial velocity / time , we get the acceleration to be -2.33 m/s^2.The skateboarder's acceleration when travelled at 7 meters per second rolls to a stop at the top of a ramp in 3 seconds is calculated out to be -2.33 m/s^2.

To know more about acceleration visit:

https://brainly.com/question/12550364

#SPJ13

URGENT!! ILL GIVE
BRAINLIEST! AND 100 POINTS

Why will a balloon filled with helium float in air?

A. Helium is a dense as air
B. Helium is denser than air
C. Helium is diatomic molecule
D. Helium is less dense than air

Answers

Answer:

D is the correct answer

Explanation:

Helium-filled balloons rise in the air because the density of helium is less than the density of air.

how close were your experimental results to the theoretical values? what experimental factors contributed to the error between experimental and theoretical measurements of specific heat?

Answers

Actual specific heat capacity would be less than the computed experimental specific heat capacity.

The experiment's measurement of water's specific heat capacity, c, is higher than the accepted value for c. This is because some heat was lost to the surroundings, causing the experimental temperature rise to be q smaller than the projected temperature rise.

The quantity of heat energy needed to raise the temperature of 1 kg of a material by 1 K is measured as specific heat capacity. It is crucial because it will show how much energy will be needed to raise or lower an object's temperature by a certain amount for a certain mass.

In this experiment, the primary source of error is heat loss by conduction. The conservation of energy serves as the theoretical foundation for this particular heat test. Energy can be in the form of heat, and in this instance, heat will be transported from the sample to the water.

To know more about theoretical values refer to the given link :

https://brainly.com/question/15741538?referrer=searchResults

#SPJ9

.
Determine the acceleration of an object that can go from 0-60 m/s over the course of
1600 m.

Answers

Answer:

1.125 m/s^2

Explanation:

Given:

u = 0v = 60 m/sS = 1600 m

To Find:

Acceleration (a)

Formula used:

v^2 = u^2 + 2aS

where,

v = final velocity

u = initial velocity

a = acceleration

S = Displacement

Let the acceleration be a.

Using the above formula, we have

60^2 = 0^2 + 2(a)(1600)

3600 = 3200a

a = 36/32

a = 9/8

a = 1.125 m/s^2

So, the acceleration is 1.125 m/s^2.

HELP W 2 AND 3 PLEASE IMPORTANT!!

Answers

The maximum resultant of two vectors , one 10m/s and 20 m/s will be 22.36.

What is projectile motion?

The movement of an object that has been launched into the air is known as projectile motion. Only gravity is felt by the item after the initial force that launches it. Projectile and trajectory both refer to the same thing: an object. Air resistance is the name for the frictional force that an object experiences as it moves through the air and slows it down. Air resistance does greatly change trajectory motion, but because it is difficult to calculate, it is not taken into account in basic physics.

The separation of horizontal and vertical motions is the most crucial idea in projectile motion.

We have given two velocities 10m/s and 20m/s. [tex]\sqrt10²+\sqrt20²[/tex]  → √500 = 22.36 The maximum resultant will be 22.36. The bag fall straight down or not fly back to the plane because Everything  in this world , when dropped from height it will only fall down towards are earth because of gravitational force .

To learn more about Projectile motion refer

https://brainly.com/question/11049671?referrer=searchResultssearchResults

#SPJ13

A young girl sleds across a snowy field. calculate the magnitude of the friction force she experiences if her mass if 35 kg, the sled's mass is 50kg, and the coefficient of of friction with the snow is 0.220

Answers

The magnitude of the friction force she experiences=> f=  183.26 N.

friction force isthe force which opposes the motion of an object.

Total mass= 50 + 35 kg=85 kg

g= 9.8 m/s²

coefficient of friction with the snow (ц)=0.220

the friction force acting here is kinetic friction force, which is product of coefficient of friction and force acting on it which is mass × acceleration due to gravity.

the magnitude of the friction force= kinetic friction acting here=ц m g

                                   f = 0.220 × 85 kg × 9.8

                                   f=  183.26 N

friction force acting here is =  183.26 N.

LEARN MORE ABOUT FRICTION-

https://brainly.com/question/20241845

#SPJ4

a rocket test sled accelerates at a constant rate of 25 m/s2 from rest while moving along a straight track. the rocket engine turns off instantly when the sled reaches a speed 30 m/s. the sled then moves freely (acceleration

Answers

The total distance that the sled moved is 332.01 m.

How to find the total distance the sled moved?

Total distance s = s1 + s2 + s3

1st Case: Acceleration

u = 0 m/s

v = 37 m/s

a = 25 m/s²

Therefore, using the equation of motion:

[tex]v^{2} - u^{2} = 2as\\s = v^{2} - u^{2}/2a\\s = 37^{2} - 0^{2}/2 * 25\\s = 27.38m[/tex]

2nd Case: No Acceleration

t = 7 s

v = 37 m/s

[tex]s_{2} = v * t\\ s_{2}= 37 * 7 = 259m[/tex]

3rd Case: Deceleration

a = -15 m/s²

u = 37 m/s

v = 0 m/s

Therefore, using the equation of motion

[tex]v^{2} - u_{2} = 2as\\[/tex]

[tex]s = 0^{2} - 37^{2}/2 * -15 = 45.63m[/tex]

Therefore,

S = 27.38 + 259 + 45.63 m = 332.01 m

To learn more about acceleration, refer

https://brainly.com/question/14344386

#SPJ9

A block of wood has a mass of 120 g
and a volume of 200 cm³. What is the density of
the wood?

Answers

0.6 grams per cubic centimeter
So, if we're going to solve this problem, the mass here is 1 hund, 2120 grams and the volume is 200 cubic centimeter. Therefore, our density is, we have 0.6 grams per cubic centimeter okay.

Answer: 0.6 g /cm^3

Explanation:

Just plug in the value in the equation d=m/v and you will get the answer!

A catapult shoots an object 1.65m at an initial velocity 15m/s. It is in the air for 0.33s What was their initial angle of launch?​

Answers

With the use of the formula below, their initial angle of launch was 26.2°

What is a Projectile ?

A projectile is any object that is projected into the air which take a trajectory path.

Given that a catapult shoots an object 1.65m at an initial velocity 15m/s. It is in the air for 0.33s. Their initial angle of launch can be calculated by using the formula

h = usinФt - 1/2gt²

Where

h = 1.65 mu = 15 m/st = 0.33sФ = ?

Substitute all the parameters into the formula

1.65 = 15sinФ × 0.33 - 1/2 × 9.8 × 0.33²

1.65 = 4.95sinФ - 0.5336

Collect the like term

4.95SinФ = 1.65 + 0.5336

4.95SinФ = 2.184

SinФ = 2.184/4.95

SinФ = 0.4411

Ф = [tex]Sin^{-1}[/tex](0.4411)

Ф = 26.2°

Therefore, their initial angle of launch was 26.2°

Learn more about Projectile here: https://brainly.com/question/24216590

#SPJ1

a charged particle a exerts a force of 2.62 n to the right on charged particle b when the particles are 13.7 mm apart. particle b moves straight away from a to make the distance between them 17.7 mm. what vector force does particle b then exert on a?

Answers

The force that the particle A exerts on the particle B, which is still to the right of it, points to the left.

What does a vector mean?

A measurement with both magnitude and direction. It is often represented by an arrows whose length is proportional to the size of a quantity and whose orientation is the same as that of the quantity. An vector does not even have position, while having direction and magnitude.

Briefing:

Lets look at the ratio of the forces of the same charges but at different distances

[tex]$\frac{F_1}{F_2}=\frac{k_e \frac{q_{A q_B}}{r_1^2}}{k_e \frac{q_A q_B^2}{r_2^2}}$[/tex]

[tex]$\frac{F_1}{F_2}=\frac{r_2^2}{r_1^2}$[/tex]

Pugging in our given values we get the force F2 as:

[tex]$F_2=\frac{r_1^2}{r_2^2} F_1$[/tex]

=(13.7mm)2/(17.7mm)2(2.62N)

=1.57 N

The force that the particle A exerts on the particle B, which is still to the right of it, points to the left.

To know more about vector visit:

https://brainly.com/question/13322477

#SPJ9

In the situation shown below, what will happen if the cannon fires a banana at the same time that the monkey falls from the tree? (Assume the banana has a high enough initial velocity to reach the tree on the fly.)

Answers

In the situation shown, if the cannon fires a banana aimed underneath the monkey at the same time that the monkey falls from the tree, the banana will fly below the monkey and miss.

In the presence of gravity, the banana will move in a parabolic path. As the monkey lets go of the tree, it will have a downwards acceleration due to the presence of gravity. But both the banana and the monkey will have the same amount of acceleration. Because gravity causes objects to accelerate at the same rate independent of their mass.

Since both the banana and the monkey experienced the same acceleration, both will fall equal amounts of distance below their gravity-free path. So the banana misses the monkey, moving below the monkey. The only way the banana hits the monkey is that if the cannon is aimed at the monkey.

Therefore, if the cannon fires a banana aimed underneath the monkey at the same time that the monkey falls from the tree, the banana will fly below the monkey and miss.

To know more about the monkey and the zookeeper dilemma

https://brainly.com/question/7981776

#SPJ1

5. Modern houses have systems to control internal air temperatures in times of very cold or hot weather. In these homes, hot or cool air is pumped into the interior of the house to help keep the temperature comfortable. Based on what you know about how cool and warm air circulate in the atmosphere, what might an engineer need to consider when designing a heating/cooling system for a home in a cooler climate?

How might the design differ for a house found in a warmer climate?

Answers

The engineer should take into account the convective currents that cause higher temperature gases to rise and lower temperature gases to sink.

What is convection?

Convection is a term that refers to the way in which heat is transmitted in a liquid or gaseous state as a consequence of the actual movement of particles at different temperatures. If this movement is due to the effect of gravitation, due to differences in density, it is called natural convection.

What might an engineer have to consider when designing a heating/cooling system for a house in a colder climate?

The engineer must take into account that, due to their density, the hottest gases tend to rise, and the coldest gases descend. Therefore, he would have to find a way for the hot gases to leave the floor and circulate around the house so that it stays at a warm temperature.

How might the design of a house that is in a warmer climate differ?

In the case of a house that is in a warmer climate the engineer should take into account convection because it can find a way in which the hot gases rise and are released through the roof of the house and keep the gases cold inside the house.

Learn more about convection in: https://brainly.com/question/4138428

#SPJ1

How does a change in the solar constant impact the absorption of shortwave radiation and the emission of longwave radiation by the earth-atmosphere system?.

Answers

Answer:

Option - d This is trick question, since the solar constant never change. The gravity of the Sun keeps the planets in their orbits at all times. They stay in their orbits, since there is no other force in the Solar System which can stop them. Yeah this might help. Add to brainliest please

bryan allen pedaled a human-powered aircraft across the english channel from the cliffs of dover to cap gris-nez on june 12, 1979. (a) he flew for 169 min at an average velocity of 3.53 m/s in a direction 45° south of east. what was his total displacement? (enter the magnitude in km and the direction in degrees south of east.)

Answers

The total displacement is 3.58 kilometers to the south of the east. An object's total change in position is referred to as displacement, a vector variable that measures "how far out of place an object is."

A scalar quantity known as distance measures "how much ground an object has traversed" while moving. An object's total change in position is referred to as displacement, a vector variable that measures "how far out of place an object is. These factors provide the overall displacement: where,

The average speed is v.

Time has come.

The typical speed is:

v = 3.53 m/s

While the time must be changed from minutes to seconds:

t=169*60

=10140s.

Consequently, the displacement's size is

=3.53*10140

=35794 m

=3.58 km

Furthermore, since the direction and speed are identical, the direction is 45° south of east.

Learn more about Displacement here-

https://brainly.com/question/11934397

#SPJ4

Jacob has 10 cars for his train. when they are all used, the train cannot make it up the hill. explain what jacob could do to answer this question: how many cars can the train pull up the hill?

Answers

To answer the question effectively, Jacob should use trail and error as a method. When doing so, he should be reducing the number of cars loaded in the train one after the other until he successfully make the train pull up the remaining cars.

For Jacob to answer this question and to find the number of cars that the train can pull up the hill, he should use a method know as trial and error. With the method, Jacob would want to decrease the number of cars loaded in the train one after the other, and should be pulling the train up after every trail.

The number of cars loaded in the train can be decreased by one for each case Jacob makes an attempt up to the time he successfully make the train pull up the hill.

Learn more about trial and error method here:

https://brainly.com/question/17239960

#SPJ4

How many seconds will it takes to stop?

Answers

In order to find the time it takes, first let's convert the distance from miles per hour to feet per second: calculate the acceleration using Torricelli's equation

[tex]40\text{ mph}=40\cdot1.467\text{ ft/s}=58.7\text{ ft/s}[/tex]

Then, let's :

[tex]\begin{gathered} V^2=V_0^2+2\cdot a\cdot d\\ \\ 0^2=58.7^2+2\cdot a\cdot50\\ \\ 100a=-3445.7\\ \\ a=-34.46\text{ ft/s^^b2} \end{gathered}[/tex]

Now, we calculate the time with the formula below:

[tex]\begin{gathered} \Delta S=V_0t+\frac{at^2}{2}\\ \\ 50=58.7t-17.23t^2\\ \\ -17.23t^2+58.7t-50=0\\ \\ t=\frac{-58.7\sqrt{58.7^2-4\cdot(-17.23)\cdot(-50)}}{2\cdot(-17.23)}\\ \\ t_1=t_2=1.7 \end{gathered}[/tex]

Therefore the time required is 1.7 seconds.

A movie stunt driver on motorcycle speeds horizontally off a 13 m high cliff at a speed of 20.8 m/s. How far (dx) from the base of the cliff will he land?

Use g= 9.8 m/s2 for the acceleration due to gravity.

Round your answer to two decimal places.

Answers

The horizontal displacement of the stunt diver from the base of the cliff is 33.9 m

What is time of motion?

The time of motion of an object is the time taken for the object to travel from its initial position to the final position.

The time taken for the stunt diver to travel down the given height is calculated as follows;

h = vt + ¹/₂gt²

where;

v is the initial vertical velocity of the stunt diver =  0g is acceleration due to gravityt is the time of motion of the stunt diverh is height of fall

h = ¹/₂gt²

2h = gt²

t² = 2h/g

t = √(2h/g)

t = √(2 x 13 / 9.8)

t = 1.63 seconds

The horizontal distance travelled by the stunt diver is calculated as follows;

X = Vₓt

where;

X is the horizontal distance of the stunt diverVₓ is horizontal speed of the stunt divert is the time of motion

X = 20 .8 m/s  x  1.63 s

X = 33.9 m

Thus, the displacement of the stunt diver from the base of the cliff is 33.9 m.

Learn more about horizontal distance here: https://brainly.com/question/24784992

#SPJ1

which organism in this food web is an ominovere

Answers

Answer:

Omnivores generally occupy the third trophic level alongside meat-eating carnivores. Omnivores are a diverse group of animals.

Explanation:

Examples of omnivores include bears, birds, dogs, raccoons, foxes, certain insects, and even humans.

If the output work is 500 J and the input work is 380 J, what is the machine efficiency?

Answers

Answer:

Therefore machine efficiency is 131.6%.

Explanation:

Data

work output = 500J

work input = 380J

M.E = ?

M.E = work output/work input × 100%

M.E = 500J/380J × 100%

M.E = 131.6%

Therefore machine efficiency is 131.6%.

PLEASE THIS IS URGENT!!! I'M STUCK ON THIS QUESTION AND THIS IS MY LAST RESORT!!!!! How do mass and distance affect the gravitational pull of an object?

Answers

Answer: The force of gravity depends directly upon the masses of the two objects, and inversely on the square of the distance between them. This means that the force of gravity increases with mass, but decreases with increasing distance between objects.

Explanation: Hope this helps. : )

Other Questions
Revise the following sentence to ensure subject-verb agreement and maintain the intended meaning.Our study group meet at the coffee shop every Wednesday at 6:00 p.m.The group meet at the coffee shop every Wednesday at 6:00 p.m.Our study group meets at the coffee shop every Wednesday at 6:00 p.m.Our study group met at the coffee shop every Wednesday at 6:00 p.m.Our study group will meet at the coffee shop every Wednesday at 6:00 p.m. Jared lost a total of $56.00 on his investment over 7 months. He lost an equal amount of money each month. Jared used this equation to figure out how much money he lost each money. -56.00/7=-8.00 what does -56.00/7=-8.00 tell us? Determine the values of y in the equation y2 = 144.a. y = 12b. y = 72c. y = 12d. y = 72 Upon graduating from college, annie needed to decide which city she wanted to live in, what kind of job to look for, whether to apply to graduate school now or later, what to do about her lease that was going to expire in three months, and whether to trade-in her car. What would you advise annie to do first in her decision-making process?. please help................................ as a project manager, you identified a process-based problem youd like to improve. before implementing a solution, you conduct performance metrics and data collection. this establishes baseline data that will determine success. what dmaic step did you apply? What is the slope of the line? requirement 2. what are the job costs of the laguna model and the mission model using (a) normal costing and (b) actual costing? (a) identify the formula to calculate the indirect costs under normal costing and then calculate the indirect costs for each model. Performance Task The 2022 Wild Youth Congress with the theme "When World's Young Leaders of Tom Meet will convene in the Philippines As the chair of the Philippine Commission on Youth, you have been appointed as keynote speaker in one of the plenary sessions on the topic The African Vinuth Rising above the Challenges of Modernity that will be attended by Youth delegatet from 30 participating countries around Asia, Europe, Africa and America. Your speech must aims be eigen The youth delegates about the true identity of the African youth and how they respond to the challenges of modernity. Your speech must ee informative and relevant in content, accurate in language conventions, logical organization, and engaging and animated delivery How fast do raindrops fall in still air why is 25 a compiste number A student with general phonological awareness can learn to read fluently, even if the student has not yet developed awareness of speech sounds at the phoneme level. True or false?. Calculate the wavelength of a photon (in nm) that has the frequency of 5.66x10^14 Hz Answer asap whats the correct answer answer now for brainlis5? Why does the NAWSA dislike the English suffragettes? Find the value of r so that the line that passes through each pair of points has the given slope:(r, -2) (10, 1) and the slope of the line is 1/4 4(5x - 2) = 2(9x + 3) the main distinction between applied and basic business research is that the former is specifically aimed at solving a currently experienced problem,whereas understanding of phenomna and problems that occurs in various organizational settings polypropylene has a density of 0.90 g/cm3. explain why 4 different-sized cylinders made out of this material would not be able to be used in this experiment (following the exact procedure you did) to find the density of the material 3. How are placer mining, hydraulicmining, and hard-rock miningdifferent?