Car speed = 40m/ hour
3 hours = 40 × 3 = 120m /hour
Answer:
120
Explanation:
if the car travels 40 in one hour , to find the speed in 3 hours multiply 40 x 3 which will give us 120
If 40 N force is exerted by a box covering 2 metre square area, calculate pressure.
[tex]\\ \sf\longmapsto Pressure=\dfrac{Force}{Area}[/tex]
[tex]\\ \sf\longmapsto Pressure=\dfrac{40}{2}[/tex]
[tex]\\ \sf\longmapsto Pressure=20Pa[/tex]
[tex] \sf \huge \red {\dag} Given[/tex]
[tex]\sf \longmapsto \: Force \: = 40 \: Newtons[/tex]
[tex]\sf \longmapsto \: Area \: = \: 2m \: Square \: ( {2m}^{2} )[/tex]
We know that the formula of Pressure is
[tex]\sf \longmapsto \: Force/Area[/tex]
Let's start.
Put the values[tex]\sf \longmapsto \: \: P = 40 \: newtons(force)/2(Area)[/tex]
[tex]\sf \longmapsto Pressure \: 20 \: N/m^2[/tex]
[tex]\boxed{\sf\red{\boxed{ \sf Pressure ≈ \: 20 \: N/m^2}}}[/tex]
Please give an answer that is coherent
A ceiling fan operates at three speeds, using 120 V of electricity from the wall. At low speeds, it uses 0.25 A. Calculate the resistance needed to generate that current. Then in 1-2 sentences, describe how the resistance would change at medium and high speeds if larger currents are needed at those speeds. Your answer should include the calculated resistance and a sentence describing your reasoning.
Answer:
480
Explanation:
resistance equals to potential difference divide by electric current
120÷0.25
=480
Answer:
[tex]\mathsf {480 \Omega}[/tex]
Explanation:
[tex]\textsf {Formula used for calculating resistance :}[/tex]
[tex]\mathsf {Resistance = \frac{Voltage}{Current} }[/tex]
[tex]\textsf {This is otherwise known as Ohm's Law, hence the unit of resistance.}\\[/tex]
[tex]\textsf {Solving :}[/tex]
[tex]\implies \mathsf {R = \frac{120}{0.25}}[/tex]
[tex]\implies \mathsf {R = 480\Omega}[/tex]
[tex]\textsf{If the fan uses higher current at higher speeds, then}\\\textsf{the resistance would decrease as it is inversely}\\\textsf {proportional to the current.}[/tex]
The rate at which work is done is called
a. efficiency
b. effort time
c.
force
d. power
Please select the best answer from the choices provided
Ο Α
ОВ
ОС
Answer:
The rate at which work is done is power
Dark matter is inferred to exist because Select one: a. we can observe its gravitational influence on visible matter. b. it explains how the expansion of the universe is accelerating. c. we see lots of dark patches in the sky. Clear my choice
Answer:
(a) the gravitational influence on visible matter can not be explained by matter that can be seen.
If the submarine intends to submerge to a depth of 150 m, what pressure must it be designed to withstand
Explanation:
Hydrostatic pressure, P = hdg where d is density if the liquid ( water)
P= 150m × 1000kgm-3 × 10ms-2
P= 1.5 ×10^6 Pa
given. force of 88N and an acceleration of 4 m/s 2 what is the mass?
Explain and give an example of inertia
Answer:
Inertia regards objects staying in rest or in motion unless an outside force alters this. An example would be kicking a soccer ball. It was originally still (not moving) on the turf, until your kick altered this and set it into motion. Similarly, the friction of the turf will alter this state of motion by eventually bring the ball to a complete stop.
boom :)
hope this helps!
What type of Energy is an egg that's about to fall out of a nest*
What type of watches are used nowadays to measure time? Explain one of
them?
Answer:
Furthermore, some modern watches (like smart watches) even incorporate calculators, GPS and Bluetooth technology or have heart-rate monitoring capabilities, and some of them use radio clock technology to regularly correct the time. Most watches that are used mainly for timekeeping have quartz movements.
Explanation:
helppp mee pllleasse
Answer:
up swelling moves water horizontally
In a hydraulic press a force of 200N is applied to a master piston of area 25Cm2.if the press produces 500N determine the area of the piston.
Answer:
625 GIVE ME BRAINLIEST ANSWER PLEASE
Explanation:
This question is based on pascal's Law.
So By Pascal's Law
=
therefore =force on input piston =200N
= Force on output piston = 5000N
therefore after putting the values we get,
a) = (25x 5000)/200
= 625
b) area of the salve piston = = 625
so = 625/3.14 = 199
so r = = 14.10 cm
A mass of 5.00 kg in a gravitational field of 7.00 n/kg. What force acts on the mass?
Answer:
35N
Explanation:
force=mass×gravity
the mass is 5 and the gravity is 7 therefore:
force=7×5
=35N
I hope this helps
which wave has a higher frequency and why?
Explanation:
the figure in the left side has higher frequency.
because it has more nos. of wave in 1sec.
If the acceleration of an object increases, what effect does this have on the Force and Mass?
A Force Increases, Mass Increases
B Force Decreases, Mass Decreases
C Force increases, Mass remains the same
D Force Decreases, Mass remains the same
Answer:
Force Increases and Mass remains the same.
Explanation:
In fish BB-blue, BW-blue with white stripes, WW-white. Cross a white fish with a fish with blue and white stripes. What is the probability of having white fish offspring?
Answer: Juvenile fish go through various stages between birth and adulthood. When they have developed to the point where they are capable of feeding themselves, the fish are called fry. When, in addition, they have developed scales and working fins, the transition to a juvenile fish is complete and it is called a fingerling.
What hazardous wastes are common in ordinary households? What can you do to reduce the impact you make on the environment from the use of hazardous wastes?
Answer:
The most common products include aerosols, anti-freeze, asbestos, fertilizers, motor oil, paint supplies, photo chemicals, poisons, and solvents, cleaning supplies.
Explanation:
Use homemade cleaners
You can find local retailers to take rechargeable batteries from laptop computers, cordless power tools, cellular and cordless phones, and camcorders at the Rechargeable Battery Recycling Corporation’s website
What is thermal energy.
Explanation:
thermal energy refers to the energy contained within a system that is responsible for its temperature. Heat the flow of thermal energy
In a car race, the average speed of the car was 90 km/hr where the total
covered distance was 450 km.
1. Calculate the average speed of the car in SI unit.
Explanation:
The speedometer of a motor car showed the following speeds in km per hour at the ends of successive intervals of 3 secs. 38.9, 52.8, 64.4. 73.6, 80.9, 86.1, 90.0, 92.5 Plot the velocity – time graph in convenient units and find from the graph, (a) The distance covered while the speed increased from 80
Dark matter is inferred to exist because it explains the abundance of helium in the universe today. we can observe its gravitational influence on visible matter. it explains how the expansion of the universe can be accelerating. we see lots of dark patches in the sky
we can observe its gravitational influence on visible matter.
Dark matter is a term used in astrophysics to refer to matter that corresponds to approximately 80% of the matter in the universe.
Dark matter is related to the motion of galaxies because visible matter makes up only a small part of the cluster and the galaxies show signs of being composed mainly of a halo of dark matter concentrated in their center.
Learn more in: https://brainly.com/question/17548748
Two 4 kg blocks hang from a rope that passes over two frictionless pulleys . What is the tension in the horizontal portion of the rope if the blocks are not moving and the rope and the two pulleys have negligible mass?
The tension in the horizontal portion of the rope provided the blocks are not moving and the rope has negligible mass is 40 N
The tension in the rope is a pulling force that acts on the rope when the mass of 4kg is placed on each side of the two frictionless pulley.
According to Newton's second Law;
Force = (Tension) = mass × acceleration due to gravity
∴
We can say:
Tension = 4kg × 9.81 m/s²
Tension = 39.24 N
Tension = 40 N (to the nearest whole number)
Therefore, we can conclude that the tension in the horizontal portion of the rope is 40 N
Learn more about Newton's Law here:
https://brainly.com/question/3715235?referrer=searchResults
weight of 1 kg becomes 1/6 on moon. If radius of moon is 1.76×10^6 m, then the mass of moon will be
Answer:
7.65 x 10^22kg
sorry if im wrong!
Please help :[ Hold a flat piece of paper horizontally. Lift it high in front of you, and drop it. Then crumple a piece of paper into a tight ball, hold it high in front of you, and drop it from the same height. Compare the motion of the two pieces of paper.
The one you lifted in front of you ( the flat piece of paper being holded horizontally ) goes down so slow. While the one being crumpled into a ball goes down fast. Subscribe to DreamfanBG for support.
Answer:
Answer below
Explanation:
The flat piece of paper just gently glided to the ground, as if it were a feather. It didn’t go down in a straight line, it swayed from side to side. The crumpled piece of paper seemed like it had more weight to it (although I know that it didn’t), and it fell way quicker than the flat piece of paper.
_____________________________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
using the methos of dimensions derive an expression for the centripetal force f acting on a particle of mass m mivingv with velocity v in a circle of radius r?
According to the Question:
[tex]\footnotesize\implies F \propto [m]^x [v]^y [r]^z[/tex]
[tex]\footnotesize\implies F =k [m]^x [v]^y [r]^z \:...(i)[/tex]
K = Dimensionless ConstantNow, substituting Dimensions of each physical quantity in equation (I):
[tex]\footnotesize\implies [M^1L^1T^{-2}] =[M^1L^0T^0]^x [M^0L^1T^{-1}]^y [M^0L^1T^0]^z[/tex]
[tex]\footnotesize\implies [M^1L^1T^{-2}] =[M]^x [L]^{y + z} [T]^{ - y}[/tex]
On comparing the powers of LHS and RHS:
[tex]\implies \bf x = 1[/tex]
[tex]\implies - y = - 2[/tex]
[tex] \implies \bf y = 2[/tex]
[tex]\implies y + z = 1[/tex]
[tex]\implies z = 1 - 2[/tex]
[tex]\implies \bf z = - 1[/tex]
[tex]\footnotesize\implies F = [m]^x [v]^y [r]^z[/tex]
[tex]\footnotesize\implies F = [m]^1 [v]^2 [r]^{ - 1}[/tex]
[tex]\implies\footnotesize \underline{ \boxed{ \bf \red{ F = \frac{m {v}^{2} }{r} }}}[/tex]
An object weighs 15 N in air and 13 N when submerged in mineral spirits, which has a density of 788 kg/m3. Determine the density of the object
The density of the object is 5911.94 kg/m³
An object's buoyancy is the upward force produced by a fluid in opposition to the weight of a partly or totally submerged object.
The buoyancy = weight of the object - weight in water
= 15 N - 13N
= 2 N
The buoyancy force can also be determined by using the expressed:
[tex]\mathbf{F_B = Volume (V) \times density ( \rho) \times g}[/tex]
[tex]\mathbf{2 = Volume (V) \times788 \ kg/m^3 \times9.8 }[/tex]
[tex]\mathbf{ Volume (V) = \dfrac{2}{ 788 \ kg/m^3 \times9.8 }}[/tex]
volume (v) = 2.589 × 10⁻⁴m³
Recall that:
The mass of an object can be estimated by using the formula:
Weight = mass × gravity
mass = Weight / gravity
mass = 15/9.8
mass = 1.5306 kg
The density of the object can now be calculated using the relation
Density = mass/volume
Density = 1.5306 kg / 2.589 × 10⁻⁴m³
Density = 5911.94 kg/m³
Learn more about buoyancy of an object here:
https://brainly.com/question/2205881?referrer=searchResults
Will a dead animal decay faster if it died in the hot summer or in the cold winter?
Answer:
hot summer
Explanation:
it's common sense
Answer:
Hot summer
Explanation:
If the body is exposed to heat then it would decompose faster because the climate is more humid. Whereas if it was in the cold winter then it would decompose slower (not to mention that it could freeze causing it not to decompose at all).
what causes us to perceive objects in three dimensions?
a. objects in 3-D appear to have width and height, but no depth
b. light bouncing or reflecting off an object in different ways
c. The curvature of space-time relative to objects solar mass
d. The rate of time dilation as we approach objects
Answer:
Light bouncing or reflecting off an object in different ways.
I just took a quiz and this was the answer
(k12 answer)
Light bouncing or reflecting off an object in different ways causes us to perceive objects in three-dimensions. Thus, the correct option is B.
How do we perceive objects in three dimension?Binocular fusion permits the perception of a single clear image and it also provides extra cues for the depth perception. That is, the binocular disparity between the two images is used by the nervous system of an individual to allow the perception of a three-dimensional world where the approximate distance of an object can be determined.
The depth perception is the ability to perceive the distance to objects using the visual system and visual perception.
Therefore, the correct option is B.
Learn more about Vision here:
https://brainly.com/question/7464210
#SPJ2
Of the Three elements listed, which element is NOT present in the mixture?
Element D
Element A
Element Z
Answer:
element ammmkkkv was a very good
A state government wants to increase the taxes on cigarettes to increase tax revenue. Because cigarettes are addictive, we would expect its demand to be: ______________
a. Elastic, Thus, the government's cigarette-tax revenues would rise with a tax increase.
b. Elastic, Thus, the government's cigarette-tax revenues would fall with a tax increase.
c. Inelastic, Thus, the government's cigarette-tax revenues would rise with a tax increase.
d. Inelastic, Thus, the government's cigarette-tax revenues would fall with a tax increase.
The demand of cigarette is elastic so the government's cigarette-tax revenues would rise with a tax increase.
The demand of cigarette is elastic because of the addiction the people can buy the cigarette even at high prices and the government's cigarette-tax revenues would rise.
The demand for cigarettes is unitary elastic (−1.06) means that a 1% increase in the price of cigarette would reduce its consumption by 1.06% so we can conclude that the demand of the cigarette is elastic and the government revenues increases.
Learn more: https://brainly.com/question/25557136
A car weighs 14500 N. What is its mass?
Answer:
w = mg
14500 = m ×10 [g=10m/s2]
m =14500/10
m=1450kg
An escalator in a busy shopping centre lifts people up from one floor to another. This takes 1.2 MJ every minute. What is the power output of the escalator motor? Give your answer in kW.
An escalator that takes 1.2 MJ every minute has a power output of 1200 kW.
An escalator used to lift people up from one floor to another, exerts a work (w) of 1.2 MJ in 1 minute (t).
In physics, power (P) is the amount of energy (w) transferred or converted per unit time (t).
[tex]P = \frac{w}{t} = \frac{1.2 \times 10^{6} J }{1min} = 1.2 \times 10^{6} W[/tex]
We can convert 1.2 × 10⁶ W to kW using the conversion factor 1 kW = 1000 W.
[tex]1.2 \times 10^{6} W \times \frac{1kW}{1000W} = 1200kW[/tex]
An escalator that takes 1.2 MJ every minute has a power output of 1200 kW.
Learn more: https://brainly.com/question/24328975