Answer:
36000
Explanation:
1/2mv²=0.5×500×12²=36000j
When do we say that work is done?
Answer:
Work is said to be done when a force applied to an object moves that object. We can calculate work by multiplying the force by the movement of the object.
Answer:
Work is done by a force on an object if (i) a force acts on the object and (ii) the object is displaced from its original position
HELP ME ILL MARK U THE BRAINLIEST
Another box of weight 1500 N is raised vertically by 3.0 m
calculate the work done on the box
Answer:
[tex]workdone = force \times distance \\ = 1500 \times 3 \\ = 4500 \: joules[/tex]
Answer:
4,500J
Explanation:
Work done = force × distance
1500N × 3m = 4,500 Joules
An object of mass 3kg was released from 40m above the ground. Using the conservation of energy, determine the velocity of the object right before hitting the ground.
Answer:
v=28m/s
Explanation:
Conservation of Energy
Ei=Ef
mgh= 1/2mv^2
9.8*40*2= v^2
784= v^2
v= 28m/s
How much pressure is created by a circular piston that is 0.24 meter in diameter
with a Force of 200.0 N? N/m2 ... (round answer to nearest ones place -no decimal)
Answer:
4000 N/m²
Explanation:
Area = πr²
Area = π x 0.12² (diameter/2)
Area = 0.05 m²
Pressure = force/area
Pressure = 200/0.05
Pressure = 4000 N/m²
Hope this helps!
A trip is taken that passes through the following points in order
Point A Om
Point B 15.0 m
Point C -30.0 m
Point D 20.0 m
Point E -10.0 m
Point F 5.0 m
What is the displacement from Point B to Point E?
A) 5.0 m right
B) 85 m right
C) 25.0 m left
D) 85 m left
Answer:
The displacement from point B to point E is 25.0 m left
The volume of a gas is halved during an adiabatic compression that increases the pressure by a factor of 2.5. By what factor does the temperature increase?
Answer: 1.24
Explanation:
Given
Volume becomes half and pressure increases by a factor of 2.5
In adiabatic process [tex]PV^{\gamma}=\text{constant}\ \text{or}\ TV^{\gamma}=\text{constant}[/tex]
Finding out [tex]\gamma[/tex] first
[tex]\Rightarrow PV^{\gamma}=2.5P(0.5V)^{\gamma}\\\\\Rightarrow \left(\dfrac{V}{0.5V}\right)^{\gamma}=2.5\\\\\Rightarrow 2^{\gamma}=2.5\\\\\text{Taking log both side}\\\\\Rightarrow \gamma=\dfrac{\ln (2.5)}{\ln (2)}\\\\\Rightarrow \gamma=1.32[/tex]
Applying same principle for Temperature
[tex]\Rightarrow TV^{1.32-1}=T'(0.5V)^{1.32-1}\\\\\Rightarrow T'=(2)^{0.32}T\\\\\Rightarrow T'=1.24T[/tex]
Thus, the temperature increases by a factor of [tex]1.24[/tex]
The factor by which the temperature increases is; 1.24
How to find increase in temperature in an adiabatic process?
In thermodynamics, an adiabatic process is one that happens when there is zero heat transfer between the system and its environment. Thereafter, the internal energy change becomes the total work done by the system. The formula associated with this process for an ideal gas is;
[tex]PV^{\gamma }[/tex] = Constant
We are told that there is an increase in pressure by a factor of 2.5 and that the volume is halved. Thus, we will have;
[tex]PV^{\gamma} = 2.5P(0.5V)^{\gamma}[/tex]
This will be simplified to;
[tex](\frac{1}{0.5})^{\gamma} = 2.5[/tex]
⇒ [tex]\gamma = \frac{In2.5}{In 2}[/tex]
γ = 1.32
Now, If the volume expands in an adiabatic process, then the volume temperature relation is expressed as:
[tex]T_{1}V_{1}^{\gamma - 1 } = T_{2}V_{2}^{\gamma - 1 }[/tex]
[tex]T_{1}V_{1}^{1.32 - 1 } = T_{2}(0.5V_{1})^{1.32 - 1 }[/tex]
Simplifying this gives;
T₁ = 1.24T₂
Read more about Adiabatic Process at; https://brainly.com/question/3962272
A train starting from rest moves with a uniform acceleration of 0.2 ms-2 for 5 minutes. Calculate the final velocity and the distance travelled in this time.
Answer:
Final velocity = 60 m/s
Distance travelled = 9000 m
Explanation:
Applying,
For Final velocity,
v = u+at ............... Equation 1
Where v = final velocity, u = initial velocity, a = acceleration, t = time.
From the question,
Given: u = 0 m/s(at rest), a = 0.2 m/s², t = 5 minutes = (5×60) = 300 s
Substitute these values into equation 1
v = 0+0.2(300)
v = 60 m/s.
Also for distance,
Applying,
s = ut+1/2at²................ Equation 2
Where s = distance travelled.
subtitute thes values above into equation 2
s = (0×300)+(0.2×300²)/2
s = 9000 m
can someone please help me with this question... thank u ❤️
Answer:
Which of the following... : constant velocity horizontal motion
A ball is thrown at certain... : 0 m/s
Please help me do this problem
Answer:
i) acceleration from B to D is 0, because the velocity is constant (stays the same)
ii) whatever units of distathat might be, we can calculate the number:
for 4 time-steps (2 to 6) the velocity is 6 per time step, that makes 24 distance units in these 4 time steps. it's the same the area underneath the graph.
there is also the vertical line from 0 to 2. we can calculate that distance like the area of a triangle with 2*6 / 2 = 6
the total distance from 0 to D is therefore 30
Using dimensional analysis prove that work = force x displacement
please answer to correct answer i will give 50 points
Answer:
Work = M1 L2 T^-2
Force =M1 L1 T^-2
displacement = L1
Work = F.ds
Work = M1 L1 T^-2 L1
work = M1 L2 T^-2
Liana draws a diagram to show the direction of the electric force acting on a charged particle in a uniform electric field.
Which change would make the diagram correct?
A. Changing the charge to negative
B. Making the field lines point down
C. Changing the force to point right
D. Removing the force arrow
Answer:
changing the force to point right is the correct answer :)
The direction of the force acting on the field should be changed to point towards the right.
What is an electric field?An electric field is referred to as the region where the influence of charge is felt. Thus, the force acts in the direction of the electric field when the field is uniform.
Having said that, it follows that the direction of the force acting on the field should be changed to point towards the right.
Learn more about electric field:https://brainly.com/question/15800304
#SPJ9
A man walks 11m west then 12m south . What is the magnitude of his displacement?
The magnitude of man's displacement at the given initial position and final position is 16.28 km.
Displacement pf the man
The displacement of the man is the shortest distance between the final position and the initial position. It can also be described as the change in the position of the man.
The magnitude of the man's displacement is calculated as follows;
d² = 11² + 12²
d² = 265
d = √265
d = 16.28 km
Thus, the magnitude of man's displacement at the given initial position and final position is 16.28 km.
Learn more about displacement here: https://brainly.com/question/2109763
A light ray strikes a reflective plane surface at an angle of 65º with the surface.
Answer the following questions (show your work)
1) Determine the angle of incidence.
2)Determine the angle made by the incident and reflected rays.
Answer:
65degrees
130degrees
Explanation:
In reflection, the angle of incidence(i) is the same as the angle of reflection (r)
Given that
Angle of reflection is 65degrees
Hence
i=r = 65degrees
Angle that angle made by the incident and reflected rays = i+r = 65+65
Angle that angle made by the incident and reflected rays = i+r = 130degrees
HELP ME WITH THIS FOR A BRAINLIEST
Option C: Runs up the slipway 5 s
hope this helped :)
What nuclear reaction is shown in the equation below
Answer:
nuclear fission
Explanation:
nuclear fission
Answer: Nuclear fission
Explanation:
Mrs. Botts applies brakes on a car help it to decelerate at the rate of -0.80m/s2. What distance is required to stop the car when it is moving 17 m/s.
Answer:
Explanation:
vf=0
vi = 17
a = -0.8
Δx = ?
vf^2 = vi^2 + 2 a Δx
Δx = (vf^2 - vi^2) / 2a
Δx = (0-17^2) / 2 (-0.8)
Δx = 180.625 m
What's scientific notation
If you have a cube that is 2x2x2 and weighs 5.29 g. How do you find the density?
Answer:
0.66
Explanation:
Follow the Density Formul d = m/v
so
d = 5.29/8
= 0.66 Density
Just correct me if I'm wrong, I mean like literally :> Thank you! ^^
Wire B has twice the length and twice the radius of wire A. both wires are made from the same material. if wire A has a resistance R, what is the resistance of wire B?
Answer:
Hello There!!
Explanation:
1/2R because wire B has twice the radius,it has four times the cross-sectional area of wire A.
hope this helps,have a great day!!
~Pinky~
As Courtney switches on the TV set to watch her favorite cartoon, the electron beam in the TV tube is steered across the screen by the field between two charged plates. If the electron experiences a force of 3.0 * 10^6 N, how large is the field between the deflection plates?
Answer:
Explanation:
Force= (q1q2)/(4/\Ęr2)
3×10^6= (1.602×10^-19)^2/(r^2)
r^2=(2.27×10^-33)/(3×10^6)
r^2=8.55×10^-45
r= 9.25×10^-23
A rock from the top of a hill is falling from rest.
Object name?
Starting energy form?
Conversion?
Final energy form?
Non usable form of energy?
Object name:- Rock
Starting energy:- Kinetic energy
Conversion:- Potential to kinetic energy
Final energy form:- Potential energy
Non usable form if energy:- Nil [ As it has potential & kinetic both]
A ball at rest has a mass of 2.5 kg. Determine the force required to accelerate the ball to 2.5 m/s?
Answer:
6.25 N
Explanation:
F = ma
F = 2.5 × 2.5
F = 6.25 Newtons
What are the units for impulse?
m/s
Kg
Ns
Newtons
Answer:
Kg.m/s is the unit for impulse
Explanation:
If i were wrong please correct me.
1 kg of rice is weighed by
Answer:
beam balance
Explanation:
A beam balance compares the sample mass with a standard reference mass
Which type of reaction is modeled by this chemical equation?
2Li + CaCl2 → 2LiCl + Ca
O A. Single-replacement
O B. Combustion
O C. Synthesis
O D. Double-replacement
The correct answer is Option (A) Single replacement.
What is Single replacement Reaction?
The reaction substituted to the other element is called single replacement reaction.The general equation is A+BX-----> AX+B.Why other options are incorrect?(B) Combustion is a type of chemical reaction in which a compound and an oxidant is reacted to produce heat and a new product.
(C) Synthesis is the production of chemical compounds by reaction from simpler materials.
(D)A double replacement reaction is a type of chemical reaction where two reactants exchange ions to form two new products with the same type of chemical bonds.
Hence Other options are incorrect and (A) is the correct one
Learn more about single replacement reaction here
https://brainly.com/question/20216315
#SPJ2
Answer: single replacement
Explanation:
What is a photon?
A. A package of a specific amount of energy
B. A single light wave
C. A subatomic particle in an atom
D. An electron that has been removed from its atom
Answer:
B
Explanation:
The reason its B is because.
In Einstein’s analysis, a photon striking the surface of a conductor is absorbed by an electron. Which statement describes the set of energy transfers that could occur?
A. the electron receives either all or none of the photon's energy
B. The electron may receive any fraction of the photon's energy, including all or none of it
C. The electron may receive only certain quantized amounts of the photon's energy, including all or none of it
Answer:
the correct answer is A
Explanation:
In an Einstein-type analysis, the photon is absorbed, it loses all its energy, therefore the electron must receive all or none of the energy of the incident photon. In a type of inelastic shock.
Let's analyze the different answers
A) true. In photon it is completely absorbed or passes without interaction
B) False. The photon must change energy, but in this case there is no absorption of the photon
C) False. In the insistent analyzes, the quantization of the electron in discrete states is not mentioned.
Therefore the correct answer is A
1. Do you think that hand signals are important in officiating games? why?
Yeah, hand signals are important in officiating games. The hand signals are given by the referee who first signals the fault and then indicates which team has won the point. A point is indicated by one finger at the side of the court to indicate the winner of the rally.
hhhhhhhhhhhhhhhheeeeeeeeeeeeeeeeeeeeellllllllllllllllllllllllllllllllllpppppppppppp
Answer:
I'm pretty sure the answer is broken
Explanation:
Which is not a common property of ionic compounds?
high melting point
good conductivity as a liquid
low melting point
Answer:
low melting point
Ionic compounds have high melting and boiling points. This is because a considerable amount of energy is required to break the strong inter-ionic attraction
Explanation: