Answer:
Normal operating temperatures of a converter are 500-800°F, and up to 1200°F when the vehicle is under heavy load.To melt the catalytic converter's substrate, the temperature inside the converter would have to exceed 2000°F.
Explanation:
the wire and bar drawing process involves pulling metal through an opening in a die in which the metal takes on the shape of the die opening.
When a wire (or bar) is drawn through a die opening, the cross section of the metal is reduced. This process is known as wire drawing (or bar drawing).
By hand, how is wire drawn?Hand pulling is used to draw silver wire. drawing thicker silver wire with a crank. Wire drawing is a metalworking technique used to shrink a wire's cross section by dragging it through just one hole.
How do you sketch metal?By dragging the metal through a die to shape and size it into the desired wire, rod, tube, or other part, metal drawing is a cold working operation.
To know more about wire drawing visit :-
https://brainly.com/question/27735578
#SPJ4
joe is an exceptional systems engineer who hopes to work at the techtonic group. he is handicapped and uses a wheelchair. techtonic does not have wheelchair ramps and some doorways are not wide enough for a wheelchair. the hr department should
The HR department should install wheelchair ramps and widen the doorways as they don't want to loose an exceptional systems engineer who hopes to work at the techtonic group.
What is a wheelchair ramps?
A wheelchair ramp is an inclined plane that can be installed in addition to or instead of stairs. Ramps make it easier for wheelchair users, as well as people pushing strollers, carts, or other wheeled objects, to enter a building.
The Americans with Disabilities Act requires wheelchair ramps (or other ways for wheelchair users to access a building, such as a wheelchair lift) in new construction for public accommodations in the United States.
A wheelchair ramp can be fixed, semi-fixed, or portable. Permanent ramps are intended to be bolted or otherwise attached to the ground. Semi-permanent ramps are commonly used in the short term and rest on top of the ground or concrete pad.
To know more about wheelchair ramps, visit: https://brainly.com/question/17395685
#SPJ4
I want to create an Excel workbook to keep track of my spending by month for the year, what would be the best names to give my worksheets?
Answer:
Name them by the month and then end with the date.
Explanation:
For example, Jan 2022. This is naming the month, which you want to have to keep track of spending and then the year clarifies it from past or future years.
Organizing by month is the best and most efficient way to look back and keep track of spending by month of the year.
Before Segway manufactured its two-wheeled people movers, it built a prototype and had staff engineers test it for performance and stability. At this stage, Segway was involved inalpha testing.product launch.test marketing.beta testing.concept testing.alpha testing
At this stage, Segway was involved in "alpha testing", when Segway manufactured its two-wheeled people movers, it built a prototype and had staff engineers test it for performance and stability.
What exactly is a Protoype?
Prototyping is an important step in the creation of any product, digital or physical. The process transforms the concept into a physical structure. This concept can be presented to stakeholders or an audience to validate assumptions and test its viability.
In simple terms, a prototype is not just a component of product design; it is one of the most important components of -
Determine whether the proposed product is viable for mass production.Before the actual product is developed, provide stakeholders and investors with an overview of the product.Prototyping is an essential step in the startup process without which all subsequent steps are pointless.
To know more about Protoype, visit: https://brainly.com/question/17205672
#SPJ4
Let’s say you are setting up your ANOVA one-way analysis of variance graph. How many residual plots can you view at one time?
Select an answer:
two plots
one plot
five plots
three plots
The number of residual plots that you can view at one time is A. two plots.
What is analysis of variance?Analysis of variance is a collection of statistical models and the estimation procedures that go with them that are used to analyze the differences between means. Ronald Fisher, a statistician, invented ANOVA.
ANOVA, which stands for Analysis of Variance, is a statistical test used to compare the means of multiple groups. ANOVA ("analysis of variance") compares the means of two or more independent groups to see if there is statistical evidence that the associated population means differ significantly.
In conclusion, the correct option is A.
Learn more about ANOVA on:
https://brainly.com/question/25800044
#SPJ1
How can I create this code this in Python?
Use the random module to generate a random number, prompt the user for a guess at the number until the user guesses the number. When the guess is too high, let the user know, when too low let them know, and when they guess it let them know it was correct and in how many guesses.
The program in Phyton that meets the above requirements is:
# import the random module
import random
# generate a random number between 1 and 10
number = random.randint(1, 10)
# initialize the number of guesses to 0
guesses = 0
# prompt the user for a guess and keep track of the number of guesses
while True:
guess = int(input('Guess a number between 1 and 10: '))
guesses += 1
# if the guess is too low, let the user know
if guess < number:
print('Your guess is too low.')
# if the guess is too high, let the user know
elif guess > number:
print('Your guess is too high.')
# if the guess is correct, let the user know and exit the loop
else:
print('You guessed the number in', guesses, 'guesses!')
break
What is the explanation?This software creates a random number between 1 and 10, prompts the user for a guess, and keeps track of how many guesses are made. If the user's guess is too low, it produces an error message. If the user's guess is too high, it produces an error notice.
If the user successfully guesses the number, it publishes a message informing them of their success and the number of guesses required and then exits the loop.
Learn more about the program:
https://brainly.com/question/11023419
#SPJ1
Multiple Choice question. Selected the correct answer.
10. Which of the following is NOT a metal used for producing exhaust manifolds?
A. Cast iron.
B. Aluminium.
C. Heavy-gauge sheet metal.
D. Stainless steel.
Answer:
C. Heavy-gauge sheet metal.
Explanation:
Exhaust manifolds are typically made from cast iron, aluminum, or stainless steel, which are strong and durable materials that can withstand the high temperatures and pressures found in vehicle exhaust systems.
Heavy-gauge sheet metal is a type of metal, but it is not typically used for this application because it may not have the necessary strength and durability.
Technician a states that the aim of thread repair is to restore the thread to a condition that restores the fastening integrity. Technician b states that thread repairs can only be performed on internal threads. Who is correct?.
Both the Technician A and B are correct. Because the statement they have provided are true in both cases.
Who is a technician?Technicians are highly qualified individuals who primarily use technology in a variety of industries. They are familiar with the technical details of the different things they work with. They frequently use electricity or modern technology in their work.
Construction of tools or materials pertaining to a technician's area of study may be assigned to them. To make sure the equipment functions properly, they may also be tasked with performing diagnostics and other maintenance tasks. In the event of issues, technicians may also be required to carry out simple repairs. It's crucial for technicians to have sound analytical and decision-making abilities.
Learn more about technicians
https://brainly.com/question/29383879
#SPJ1
Oil companies benefit from capturing ____ ____ and then injecting it back into aquifers because the increased pressure enhances oil recovery. they also save money from less taxes on emissions
Capturing carbon dioxide is advantageous for oil corporations.
What part does the oil industry play in global warming?When fossil fuels are burned, a greenhouse gas called carbon dioxide is massively released into the atmosphere. Greenhouse gases, which trap heat in our atmosphere, are to blame for global warming.
How is the environment benefited by carbon capture and storage?Before carbon dioxide (CO2) is released into the atmosphere, it is captured and stored through the process of carbon capture and storage (CCS). The technique can absorb up to 90% of the CO2 produced while burning fossil fuels to produce power and for industrial purposes like making cement.
To know more about oil visit:-
https://brainly.com/question/29530758
#SPJ4
given that an arraylist named a with elements of type integer has been declared, assign 3 to its first element.
Assign the value 3 to the first element of the arraylist a, which has been declared to contain items of the type integer.
Integers include the number zero (0), a positive natural number, and a negative integer represented by a minus sign. The negative numbers are the inverse additions of the comparable positive numbers. In mathematical notation, the boldface Z or blackboard bold displaystyle mathbb Z mathbb Z is widely used to denote the set of numbers. The displaystyle "mathbb" is used to show the set of all natural numbers, the set of all rational numbers, the set of real numbers, and the set of all rational numbers. The set of all natural numbers, the set of all rational numbers, and the set of all real numbers are also shown. Z is countably infinite, much like the natural numbers, according to Displaystyle Mathbb.
Learn more about integer from
brainly.com/question/929808
#SPJ4
Suppose that your car will not start. To determine whether the battery is faulty, you turn
on the light switch and find that the lights are very dim, indicating a weak battery. You
borrow a friend’s car and a set of jumper cables. However, how do you connect his
car’s battery to yours? What do you want his battery to do?
Note that to connect your car's battery to your friend's car using jumper cables, you should follow these steps:
Allow the two automobiles to be near to each other but not to touch.Check that both automobiles are switched off and that the keys are not in the ignition. Open the hoods of both vehicles.Find the batteries in both vehicles. The positive terminal (generally denoted by a "+") is usually bigger than the negative terminal.Connect the positive terminal of your friend's battery to one end of the red jumper cable. Connect the other end of the red jumper cable to the positive connector of your vehicle's battery.Connect the negative terminal of your friend's battery to one end of the black jumper cable.Attach the other end of the black jumper cable to an unpainted metal surface on your automobile, such as an engine block bolt. This will assist in grounding the circuit and preventing sparks.What are the signs of a faulty battery?If your engine cranks slowly, like it's tougher to start on chilly mornings, start inconsistently, or there's no sound or interior lights when you try to start, consider a failing battery, a loose or corroded connection, or an electrical draw.
To make sure your battery lasts:
Short travels should be avoided. Short automobile journeys restrict your car's battery from fully charging.Keep your battery securely attached.When you exit the car, turn off all lights.Maintain corrosion control.Check your battery frequently.When the engine is turned off, do not utilize electronics.Learn more about Battery:
https://brainly.com/question/23716491
#SPJ1
According to NEC article 110 unused knockouts and other openings in electrical boxes and cabinets are required to be ___.
Select one:
a. marked
b. closed
c. ventilated
d. listed
According to NEC article 110 unused knockouts and other openings in electrical boxes and cabinets are required to be (b) closed.
What is an electrical box?
An enclosure that houses electrical connections is called a junction box. In addition to shielding individuals from unintentional electric shocks, junction boxes safeguard the electrical connections from the elements. Junction boxes, commonly referred to as electrical boxes, protect wire connections. They contribute to the prevention of short circuits, which can result in fires. According to electrical codes, every electrical device and its wiring connections must be contained inside an authorized electrical box.
To learn more about an electrical box, use the link given
https://brainly.com/question/29304605
#SPJ4
in order to determine if the delivery system is adequate for manual firefighting, what must the engineers calculate?
A coal barge is 1000-ft-long, 100-ft-wide, and is submerged in 12 feet of 60°F water. If it is being towed at 12 mph, estimate the friction drag.
friction drag = 54546 lbf
A coal barge is 1000-ft-long, 100-ft-wide, and is submerged in 12 feet of 60°F water. If it is being towed at 12 mph, the friction drag would be 54546 lbf.
What is a Friction drag?
Friction is the resistance that occurs when two objects rub together, such as air against an airplane. Friction contributes to drag.
Because the barge is rectangular, the flow over the submerged sides and bottom is assumed to behave like B.L. over a flat plate.
Effects at the corners and leading/trailing edges are not taken into account, which could lead to deviations from the analysis. Given the size of the barge, we expect these effects to be minor.
To know more about friction, visit: https://brainly.com/question/29355763
#SPJ4
3.what information is typically provided on the grade stamp of visually graded lumber? explain, with the help of an example of a typical grade stamp.
The mill identification number must be included on a lumber grade stamp.
What is stamp-grade lumber?A grade stamp on the lumber will be looked for when a building is inspected. The inspector can only identify the quality of the wood used in the structure based on this grade stamp. Given that all construction standards call for it, the grade stamp is very significant to building inspectors.
How is timber grade determined?The quantity of transparent surface area on a board's side with the worst appearance determines its grade (with hardwoods one side will look better than the other). Long and wide, with a significant portion of its area defective, a higher grade board. -free
To know more about grade stamp visit:-
https://brainly.com/question/5881426
#SPJ4
can a fiber reinforced composite behave like a particle reinforced composite? explain why or why not.
No, a fiber-reinforced composite cannot behave like a particle-reinforced composite.
This is because fiber reinforcement is typically achieved by adding fibers made of glass, carbon, or other materials to a polymer matrix. Particle reinforcement, on the other hand, is achieved by adding particles of ceramic or metal to a polymer matrix. The two components have different properties and behave differently in different applications.
Fiber-reinforced composites are materials made of a matrix and a reinforcing fiber. The matrix is usually a polymer, a metal, or a ceramic, while the reinforcing fibers are typically glass, carbon, or aramid fibers.
For more questions like Fiber click the link below:
https://brainly.com/question/14266265
#SPJ4
If you are creating an artificial cell and you want this cell to be capable of the greatest sensitivity to an applied signal, which would be the most useful?.
Artificial cells have received a lot of attention as potential replacements for natural cells. There are numerous types of artificial cells, each with its own definition.
What is an Artificial cells?
Artificial cells are materials that have been engineered to mimic some of the properties of cells, such as surface characteristics, shapes, morphology, or a few specific functions.
These artificial cells have applications ranging from medicine to the environment, and they may be useful in developing theories about the origin of life. However, even the most basic unicellular organisms are extremely complex, and the synthesis of living artificial cells from inanimate components appears to be extremely difficult.
Nonetheless, recent progress in the creation of artificial cells ranging from simple protocells and synthetic cells to cell-mimic particles suggests that the creation of living life is no longer an impossible goal.
To know more about synthesis, visit: https://brainly.com/question/27606150
https://brainly.com/question/29706208
A torage tank for concentrated nitric acid will be contructed from aluminum to reit corroion. The tank i to have an inide diameter of 6 m and a height of 17 m. The maximum liquid level in the tank will be 16 m. Etimate the plate thickne required at the bae of the tank. Take the allowable deign tre for aluminum a 90 N/mm2
Taking the allowable design stress for aluminium as 90 N/mm². The estimated plate thickness required at base of tank is 0.1612m.
What is stress?Stress is a force per unit area that occurs in materials as a result of external forces, uneven heating, or permanent deformation. It is used in physical sciences and engineering to accurately describe and predict the behavior of elastic, plastic, and fluid materials. A stress is defined as the product of a force divided by an area.
There are numerous types of stress. Shear stress is caused by forces that are parallel to and lie in the plane of a cross-sectional area of the material, as opposed to normal stress, which is caused by forces that are perpendicular to the area.
Learn more about stress
https://brainly.com/question/26108464
#SPJ1
Two doubles are read as the power and the distance of a SoundWave object. Declare and assign pointer mySoundWave with a new SoundWave object using the power and the distance as arguments in that order. Ex: If the input is 2.5 1.5, then the output is:SoundWave's power: 2.5SoundWave's distance: 1.5Code:#include #include using namespace std;class SoundWave {public:SoundWave(double powerValue, double distanceValue);void Print();private:double power;double distance;};SoundWave::SoundWave(double powerValue, double distanceValue) {power = powerValue;distance = distanceValue;}void SoundWave::Print() {cout << "SoundWave's power: " << fixed << setprecision(1) << power << endl;cout << "SoundWave's distance: " << fixed << setprecision(1) << distance << endl;}int main() {SoundWave* mySoundWave = nullptr;double powerValue;double distanceValue;cin >> powerValue;cin >> distanceValue;/* Your code goes here */mySoundWave->Print();return 0;}
The power and the distance of a SoundWave object is
SoundWave* mySoundWave = new SoundWave(powerValue, distanceValue);
What is power?
Power is the ability to exercise control or influence over something or someone. It is the capacity to make decisions, take action, and shape events. Power is derived from a position or authority within an organization, while informal power is derived from personal characteristics such as charisma, intelligence, and experience. Power can be used for good or ill, depending on the person wielding it and the situation. The use of power should always be guided by ethics and responsibility, and those in positions of power should strive to build trust and credibility.
To learn more about power
https://brainly.com/question/25864308
#SPJ4
Which of the following statements about critical path method (CPM) is true?
A. It is an example of a variable time project scheduling method.
B. It is well suited when activity times are expected to vary.
C. It is well suited when activity times are fairly constant and can be reduced by spending more money.
D. It is well suited for R&D projects and for scheduling computer systems.
Answer: C. It is well suited when activity times are fairly constant and can be reduced by spending more money.
The statement about the critical path method (CPM) that is true is: " It is an example of a variable time project scheduling method.." (Option A)
What is the critical path method and why is it important?The critical path is defined by project managers as the process when it comes of dependent tasks in a project. Project managers may more readily prioritize work, create realistic timelines, maintain projects on budget, and avoid or offset delays by identifying the essential route.
The key variables for scheduling are
Task Timelines. This is the expected time required to execute a job using available resources.
There are also Parallel Tasks. These are the tasks that can be accomplished at the same time. Then there are preceding Tasks. These are the activities that must be accomplished before proceeding to other, dependent tasks.
Learn mroe about the critical path method:
https://brainly.com/question/24227953
#SPJ1
two technicians are discussing clogged egr passages. technician a says that clogged egr passages can cause excessive nox exhaust emission. technician b says that clogged egr passages can cause the engine to ping (spark knock or detonation). which technician is correct?
Where two technicians are discussing clogged EGR passages and Technician A says clogged EGR passages can cause excessive NOx exhaust emission and Technician B says that clogged EGR passages can cause the engine to ping (spark knock or detonation), note that BOTH technicians are correct. (Option C)
What is a Clogged Exhaust Gas Recirculation (EGR) Passage?These systems' passageways can get blocked, obstructing the flow and resulting in inadequate EGR flow, explosion, and excessive NOx emissions. If the solenoid, circuits, and EGR valve are all functioning properly and the route is clogged, cleaning the passageways with a wire brush will restore normalcy to the system.
When the EGR valve becomes clogged, the engine suffers a considerable loss of power, hauls, or difficulty of cold starts, as well as increased smoke emissions. If the EGR valve remains closed, it will not be able to reduce pollutants.
Learn more about NOx Exhaust Emission:
https://brainly.com/question/27245596
#SPJ1
Full Question;
Two technicians are discussing clogged EGR passages. Technician A says clogged EGR passages can cause excessive NOx exhaust emission. Technician B says that clogged EGR passages can cause the engine to ping (spark knock or detonation). Which technician is correct?
Technician A only
Technician B only
Both Technicians A and B
Neither Technician A nor B
data mining uses the following techniques (select all that applies) group of answer choices hypothesis testing statistical modeling search algorithms machine learning etl technology
knowledge extraction from data It is one of the processes in the procedure for discovering new knowledge. It is a computational process that combines techniques from machine learning, statistics, and database architecture to find patterns in massive data sets.
What four tasks does data mining perform?Data mining mostly serves the following four purposes: prediction capability. the method of extracting patterns from data utilizing a number of variables to forecast other variables with unknown types or values. The process of searching a database for a crucial feature of data.
What methods of data mining are there?Some data mining techniques include classification, clustering, association, data cleaning, and data visualization.
To know more about data mining visit :-
https://brainly.com/question/28561952
#SPJ4
110-v rms, 60-hz source is applied to a load impedance z. the apparent power entering the load is 120 va at a power factor of 0.607 lagging. note: this is a multi-part question. once an answer is submitted, you will be unable to return to this part. calculate the complex power. the complex power is j va.
The term "complex power" refers to the mathematical representation of electrical power. It has both real and fictitious parts, just like a complex number.
The active power is represented by the real part, while the reactive power is represented by the imaginary part. The letter S is frequently used to represent it.
What does complex power entail?The complex conjugate of the rms current phasor and the rms voltage phasor make up the complex power (in VA). As a complex quantity, its real and imaginary parts are real power P and reactive power Q, respectively.
Since the magnitude of the complex power is the apparent power, we could write it as:
S=S∠θ v−θ i
However, mathrm pf = cos(theta_v-theta_i) pf = cos(v i)
v i = cos 1 pf = 45 In this case, the value of the ta_v-theta_i v i is positive due to the exercise's knowledge that current lags voltage. The value of the complex power is:
Boxed mathbf S=120, angle 45, circle mathrm VA S=120, 45, VA
a) "mathbf S=120 angle 45 circle" "mathrm VA S=120 45"
To learn more about complex power here:
https://brainly.com/question/2355649
#SPJ1
Complete Question = A 110-V rms, 60-Hz source is applied to a load impedance Z. The apparent power entering the load is 120 VA at a power factor of 0.707 lagging. (a) Calculate the complex power. (b) Find the rms current supplied to the load. (c) Determine Z. (d) Assuming that Z = R + jωL, find the values of R and L.
Analyse and determine the drag on a small circular disk of 0.01 ft diameter moving 0.01 ft/s through oil with a specific gravity of 0.87 and a viscosity 10,000 times that of water. The disk is oriented normal to the upstream velocity.
The drag of the disk is 3.38 X 10^4.
What is drag?
Drag is a force that opposes any object's relative motion with respect to a surrounding fluid in fluid dynamics. This might be present between two liquid layers or between a liquid and a solid surface.
The resistance to motion of a body through a fluid, such as water or air, is known as a drag force. The direction of the incoming flow velocity is opposed by a drag force. This is the relative speed of the fluid and the body.
Solution Explained:
Given,
Specific gravity(sg) = 0.87
Diameter = 0.01ft
Density of Oil (P) = [tex]sg_{ph20} = 0.87 X 1.94 = 1.6878 \frac{sl}{ft^3}[/tex]
Since the viscosity is 10000 times that of water, the Reynold number is
[tex]R_{E} = \frac{PvD}{meu} = \frac{1.6878 X 0.01 X 0.01}{0.234} = 7.21 X 10^-4[/tex]
Since RE < 1, the drag coefficient for normal flow is given as:
[tex]CD = \frac{24.4}{R_{E}} = \frac{24.4}{7.21 X 10^-4} = 3.38 X 10^4[/tex]
To learn more about drag, use the link given
https://brainly.com/question/28764812
#SPJ4
A horizontal load P = 62 kN is applied at A of the assembly as shown. Determine (a) the internal force in bar BD, (b) the reaction at the pinned support C.
Internal force is 75 kN and reaction is 82.9 kN, according to the question.
What in science is a force?The word "force" has a specific meaning in science. At this level, calling a force a pushing or a pull is entirely appropriate. A power is not something an object "has in it" or that it "contains." One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.
Who made the force?Issac Newton's third laws of motion, which are outlined in his Principia Mathematica, are frequently used to illustrate the concept of force (1687).
To know more about force visit:
https://brainly.com/question/13191643
#SPJ1
In the following function prototype, how many parameter variables does this function have?
int myFunction(double, double, double);
a. 1
b. 2
c. 3
d. cannot tell from the prototype
The function prototype you provided has 3 parameter variables.
Explanation in Detail:
In a function prototype, the variables listed in the parentheses after the function name are the parameter variables for the function. These variables represent the values that will be passed to the function when it is called. In this case, the function has 3 parameter variables, all of which are of type double.
Therefore, the correct answer is C) 3.
It is important to note that a function prototype only provides information about the number, type, and order of the parameters that a function expects to receive, but it does not provide any information about the function's implementation or behavior. For example, the function prototype does not tell us what the function does with the parameter variables or what it returns.
To know more about parameter variables, visit: https://brainly.com/question/28557876
#SPJ4
two technicians are discussing an obd ii vehicle that has a flashing check engine light. technician a says there is problem with the engine lubrication or cooling system and the vehicle must not be driven, otherwise serious engine damage will occur. technician b says there is a severe ignition misfire and the driver should reduce speed and engine load and have the vehicle serviced as soon as possible. who is correct?
Technician B is correct because ignition misfire is most probably the reason a flashing check engine light.
What is ignition misfire?Fuel is ignited in the engine's combustion chamber by the ignition system. The engine will misfire on one or more cylinders if the system isn't functioning properly. However, this isn't always the case. Typically, only one cylinder is impacted. Additionally, because the components of the ignition system gradually wear out and mild misfires can be difficult to detect, you might have ignition misfires without even realizing it (although your Check Engine Light may come on, seemingly for no reason).
Misfiring has a variety of potential causes, including issues with your ignition system. It's critical to have an experienced mechanic diagnose and fix any engine misfiring issues.
Learn more about ignition system
https://brainly.com/question/14094081
#SPJ4
please help me
How urban planning can improve public health?
Answer:
search it bro
Explanation:
use it, it will give precise answer
I have
V(tension) =12W
Vr2=7,2W
Vr1=4,8W
R(resitance)2=1800 ohm
How much is
I1 and R2
The current and the resistance are obtained according to Ohm's First Law, which states that the voltage is obtained by the multiplication of the resistance and of the current, as follows:
V = R x I.
The variables are:
V is the voltage.R is the resistance.I is the current.At resistor R2, we have that:
The current is I1, as it is the same for the entire loop.The resistance is of 1800 ohms.The voltage is of 7.2 volts.Hence the current I1 is obtained as follows:
1800 x I1 = 7.2
I1 = 7.2/1800
I1 = 0.004A = 4mA.
Then for resistor R1, we have that:
The voltage is of 12 - 7.2 = 4.8 V, as the voltage for the entire loop is of zero.The current is of 0.004A.Hence the resistance R1 is obtained as follows:
0.004R1 = 4.8
R1 = 4.8/0.004
R1 = 1200 ohms.
More can be learned about Ohm's First Law at https://brainly.com/question/231741
#SPJ1
the bellman-ford shortest path algorithm works ____O on graphs with negative edge weights, but not negative edge weight cycles O only on graphs without cycles O on any graph O only on graphs with non-negative edge weights
The bellman-ford shortest path algorithm works on graphs with negative edge weights, but not negative edge weight cycles.
Define an algorithm.
A finite sequence of exact instructions is known as an algorithm in mathematics and computer science. Algorithms are frequently used to solve a class of particular problems or to carry out computations. For carrying out calculations and data processing, algorithms are used as specifications.
A method used to solve a problem or carry out a command is known as an algorithm. Algorithms are precise lists of instructions that, in either software or hardware-based routines, carry out predetermined actions step by step.
To learn more about an algorithm, use the link given
https://brainly.com/question/15217393
#SPJ4