A chemist makes 760. mL of sodium chloride (NaCl) working solution by adding distilled water to 300. mL of a 1.80 M stock solution of sodium chloride in water. Calculate the concentration of the chemist's working solution. Be sure your answer has the correct number of significant digits.

Answer:

Explanation:

The solution is described in Image.

Question 7

Lower air pressure (c) does not speed up the rate of a chemical reaction.

Question 8

The symbol represents equilibrium (a).

The pressure of gas in millimeters of mercury is 414200 mm Hg.

How are pressure and volume related to each other?

The actual law is summarised as follows:

Pressure and volume are inversely related for an ideal gas with a fixed mass maintained at a fixed temperature.

Or Boyle's law is a gas law, stating that the pressure and volume of a gas have an inverse relationship. When the temperature is held constant, pressure decreases as volume increases and vice versa.

Therefore, when the volume is halved, the pressure is doubled; and if the volume is doubled, the pressure is halved.

We know that,

1 atm = 760 mm of Hg

So, 545 atm = 545 × 760 mm Hg

= 414200 mm Hg.

To know more about pressure of gas, click the given link

https://brainly.com/question/24719118

#SPJ1

P-S bond is the least polar.

Polarity is defined as the separation of charge between two atoms participating in a bond, giving rise to a dipole moment and thus a difference in electronegativity(tendency to pull electrons towards itself).

Different atoms have different values of electronegativity

The electronegativity values of the given elements are:

C= 2.55

F=3.98

Na=0.93

Cl=3.16

Si=1.9

P=2.19

S=2.58

Electronegativity difference between:

A) C,F = 3.98-2.55 =1.43

B) Na,Cl = 3.16-0.93=2.23

C) Si,Cl = 3.16-1.9=1.26

D) P,S= 2.58-2.19=0.39

E) Na,S= 2.58-0.93= 1.65

The electronegativity difference between P and S is the least, so P-S bond will be least polar.

To know more about polarity here

https://brainly.com/question/1578097

#SPJ4

Answer:

Yes

Explanation:

A mole of a substance is equal to as many molecules of that substance as there are atoms of carbon-12 in exactly 12 g of carbon-12. This means that 1 mole of any substance is a weight, in grams, equal to that substance's molecular weight expressed in atomic mass units.

Avogadro's constant is used to calculate the number of molecules present in any given mass of the compound, in which 1 mole of the molecule is equal to 6.023×10

23

of numbers of molecules.

According to the given statement Partial pressure CO: 2.56 atm, Mole fraction ClF₅: 0.0383 and Partial pressure ClF₅: 0.11 atm.

Hydrogen, electrocatalysts, pure metals, anhydrides, formic, methyl formate, N,N-dimethylformamide, benzoic acid, and as a reduction agent in coke ovens are all produced using carbon monoxide.

Briefing:

We should apply the Ideal Gases Law to solve this:

P . V = n . R . T

We need n, which is the total moles for the mixture

Total moles = Moles of CO + Moles of ClF₅

Moles of CO = mass of CO / molar mass CO → 8.9 g/28 g/mol = 0.317 mol

Moles of ClF₅ = mass of ClF₅ / molar mass ClF₅ → 3.63g/ 130.45 g/m = 0.0278 mol

0.317 mol + 0.0278 mol → 0.398 moles in the mixture

So we have the total moles so with the formula we would know the total pressure.

P . 6L = 0.724 mol . 0.082L.atm/mol.K . 292.2K

P = ( 0.724 mol . 0.082L.atm/mol.K . 292.2K) / 6L

P = 2.89 atm

Mole fraction is defined as the quotient between the moles of gas over total moles, and it is equal to partial pressure of that gas over total pressure

Partial pressure for gas X/Total pressures = Moles of gases X/Total mole

(Moles of gas X / Total moles) . Total pressure = Partial pressure of gas X

Mole fraction CO = 0.317 / 0.724 = 0.437

Partial pressure CO = 0.88 . 2.89 atm → 2.56 atm

Mole fraction ClF₅ = 0.0278 / 0.724 = 0.0383

Partial pressure ClF₅ = 0.0383 . 2.89 atm → 0.110 atm

To know more about monoxide visit:

https://brainly.com/question/10193078

#SPJ4

However, this is predicated on the idea that the atmospheric carbon 14 content has remained constant.The answer, which is possibly 3 x 5568, is 16,704 years.

Three half life have elapsed when a reduction is made to one eighth of existing levels (1/2 3 = 1/8).

To accommodate for fluctuations in carbon 14 concentration levels, a modification should be made.

The correction can be calculated using the graph below.

The answer, which is possibly 3 x 5568, is 16,704 years.

However, the half life of carbon 14 is actually 5730 +/- 40 years, not 5,568.

3 * 5730 = 17,190 years.

However, this is predicated on the idea that the atmospheric carbon 14 content has remained constant.

Not at all.

A adjustment should be used to account for variations in carbon 14 concentration levels.The graph below can be used to determine the adjustment.

To learn more about radioactive decay refer

https://brainly.com/question/14415679

#SPJ1

The process that produces a bromohydrin is an addition reaction between Br and OH across an alkene. (Bromo = bromine; Hydrin = hydro; Water = H2O).

any of a number of organic molecules that resemble chlorohydrins but use bromine instead of chlorine.the direct, catalyst-free synthesis of vicinal bromohydrins and alkoxy bromides from olefins

The addition of the hydrogen-boron link to either a carbon-to-carbon or carbon-to-nitrogen double bond is known as hydroboration. It can also be carried out on a triple bond made of carbon atoms. Quite helpful in the synthesis of several organic compounds is hydroboration.

Learn more about halogenation on:

https://brainly.com/question/18892312

#SPJ4

The experimentally determined rate law for the destruction of ozone is as follows : Rate = k [O3]. A mechanism must be consistent with the experimentally determined rate law. However, this does not prove that a mechanism is correct.

A rate law shows how the rate of a chemical reaction depends on reactant concentration. For a reaction such as aA → products, the rate law generally has the form rate = k[A]ⁿ, where k is a proportionality constant called the rate constant and n is the order of the reaction with respect to A.The rate law that is consistent with the mechanism is rate = k[NO]2[O2].

Photochemical process is related to ozone formation as it is through this process radicals react with volatile organic compounds ( VOC ) and nitrogen oxides ( NOx) to form ozone.A reaction intermediate is a chemical species that is formed in one elementary step and consumed in a subsequent step. The slowest step in a reaction mechanism is known as the rate-determining step. The rate-determining step limits the overall rate and therefore determines the rate law for the overall reaction.

Find more about Ratelaw

brainly.com/question/15180613

#SPJ4

Answer:

TRY HARD!

Explanation:

DO UR WORK ANG GET IT DONE!

Suppose you used a plate coated with silica gel, with propanone, CHBCOCH3_ as the solvent for thin layer chromatography, the description and explanation on what the chromatogram would probably look like is given below.

In thin layer chromatography (TLC), compounds are separated based on their interactions with the stationary phase (in this case, the silica gel coating on the plate) and the mobile phase (in this case, propanone). Compounds that have stronger interactions with the stationary phase will travel more slowly up the plate, while those with weaker interactions will travel more quickly.

Given the information provided, it is very likely that the chromatogram would show three distinct spots, corresponding to compounds P, Q, and R. Compound P, which can form strong hydrogen bonds, is likely to have a strong interaction with the silica gel stationary phase and will therefore travel more slowly up the plate.

Compound Q, which can also form hydrogen bonds but not as strongly as P, is likely to have a weaker interaction with the stationary phase and will therefore travel more quickly. Compound R, which relies on dispersion forces and dipole-dipole interactions for its intermolecular attractions, is likely to have a weaker interaction with the stationary phase compared to compounds P and Q and will therefore travel even more quickly up the plate.

Therefore, the chromatogram is likely to show compound P at the bottom, followed by compound Q above it, and compound R at the top. This arrangement reflects the relative strengths of the interactions between each compound and the stationary phase.

Learn more about chromatogram from

https://brainly.com/question/1394204

#SPJ1

Option (A) Computer Simulation Model.

What is computer simulation models?

A computer simulation model is a computer programme or algorithm that simulates changes in a modelled system in response to input signals.

What are examples of simulation models?

Weather forecasting, flight simulators used for pilot training, and car crash modelling are all examples of computer simulation modelling that most of us are familiar with.

What is simulation and its types?

A simulation is a computer-generated representation of the behaviour of a real-world process or system over time. Models are required for simulations; the model represents the key characteristics or behaviours of the selected system or process, while the simulation represents the model's evolution over time.

Hence Option (A) is a correct answer.

To know more aboutsimulation models follow link

https://brainly.com/question/15182181

#SPJ4

B. False ATP.Particularly, during cellular respiration, glucose-stored energy is converted to ATP.

Cells use cellular respiration to draw energy from the bonds in food molecules like glucose and other compounds.The energy that is extracted can be stored by cells as ATP (adenosine triphosphate)

The primary fuel source for our cells is glucose.The liver and muscles are where the body stores glucose when it is not needed for energy.This form of glucose that is stored in the body is known as glycogen and is composed of several linked glucose molecules.

To know more about chemical bonds visit:

https://brainly.com/question/15444131

#SPJ4

The volume of ammonia produced at STP will be 98.56 L

Standard temperature and pressure are a standard set of experimental measurement conditions that must be established to allow comparison between different data sets. At STP, 1 mole of any gas (6.023 × 10²³ representative particles) occupies a volume of 22.4 L.

N₂ + 3H₂ ⇄ 2NH₃

The mole ratio of N₂ and NH₃ is 1:2. So the moles of NH₃ will be:

Moles of NH₃ = 2 × 2.2

= 4.4 moles

At STP, 1 mole occupy 22.4 L of volume.

Volume occupied by 4.4 moles of NH₃:

= 4.4 × 22.4

= 98.56 L

Thus, the volume of ammonia formed will be 98.56 L

To know more about STP click-

https://brainly.com/question/15766562

#SPJ1

The correct description of each microscope is as follows:

Microscope is an optical instrument used for observing relatively small objects.

Compound microscopes are light illuminated. The image seen with this type of microscope is two dimensional (2D). The compound microscope is the most commonly used as it can view individual cells, even living ones. It has high magnification. However, it has a low resolution.

Scanning electron microscope make use electron illumination. The image is seen in 3-D. It has high magnification and high resolution. The specimen is coated in gold and the electrons bounce off to give you and exterior view of the specimen.

Transmission electron microscope is also electron illuminated and gives a 2-D view. Thin slices of specimen are obtained. The electron beams pass through this. It has high magnification and high resolution.

A scanning tunneling microscope is a type of microscope used for imaging surfaces at the atomic level.

Learn more about microscope at: https://brainly.com/question/6686502

#SPJ1

A scientist determined  the bones from a mastodon , The bones were 9377 years old when they were first found.

Find the decay constant (λ) first by using

λ= 0.693÷t₁/₂

λ=0.693÷5750

λ= 1.205×10⁻⁴

Now,

N=N₀e⁻λt

Where, originally,  N₀= Mass of radioactive element

N= mass of radioactive  element after time t

Apply natural logarithm on both the sides

In N=N₀₋λt

Let  N₀ be 100 then N will be 100-58.8

= 41.1

In (41.1)= In (100)₋(1.205×10⁻⁴t)

In [41.1÷100]= ₋1.205×10⁻⁴t

₋1.136= ₋1.205×10⁻⁴t

t= ₋1.13÷(₋1.205×10⁻⁴)

t= 9377 years

Radioactive : Radioactivity is the term used to describe how an atomic nucleus splits or decays. Radiation is emitted when a radioactive material decays. A few types of decay include spontaneous fission, beta decay, gamma decay, neutron emission, and alpha decay.

Bones: The majority of vertebrate animals contain bones, which are rigid organs and a part of their skeleton. The bones, which also produce red and white blood cells, store minerals, provide the body structure and support, and allow motion, protect the body's other organs.

to know more about Mass visit this:

https://brainly.com/question/19694949

#SPJ1

Conjugate acids are formed from  base by accepting a proton from an acid. The conjugate acid of the base (CH₃)₂NH is  (CH₃)₂NH₂⁺.

According to Bronsted- Lowry concept, an acid is a substance, which donate a proton whereas bases are proton acceptors. In an acid base reaction, acids donate their proton to form their negative ion called conjugate bases.

When bases accepts protons they form their positive ions called conjugate acid of the base. The conjugate acid and conjugate base of the acid - base reaction together is called the conjugate pair.

Dimethylamine (CH₃)₂NH is a Bronsted - Lowry base since it accepts one proton to form its conjugate acid (CH₃)₂NH₂⁺. The positive charge is acquired because of the positive charge of the extra proton.

To find more on Bronsted- Lowry concept, refer here:

https://brainly.com/question/29317749

#SPJ1

the Particle Neutron is discovered by James Chadwick and as it was the neutral particle he named it so to be neutron. The proton was discovered by Ernest Rutherford and he named his discovery as protons which is based on a Greek word "protos" which means 'First'.

Neutron is the neutral particle present in the nucleus of an atom with same mass as of protons. It doesn't posses any charge on it.

Proton is the positively charged particle present in the nucleus of an atom with Neutron. Protons and neutron both have same masses but they differ in their nature.

To know more about Neutron visit

https://brainly.com/question/15240353

#SPJ1

Before John Dalton's extraordinary theory, there were other speculations that focused on the components of mass. The subatomic particles that create various sorts of atoms were eventually understood by the scientists. The laws of mass conservation, multiple proportions, and constant composition were all fully established by this theory for the first time. The scientists subsequently made the discovery of three subatomic particles. Numerous more significant discoveries were prompted by the discovery of the electron, proton, and neutron.

Atoms make up matter. A large number of subatomic particles make up one atom. We shall learn who made the discovery of electron protons and neutrons in this section. Each subatomic particle was found as a result of a different series of experiments. Nuclear Physics and its different branches were founded as a result of these revolutionary discoveries made in the 19th and 20th centuries.

To comprehend the physical characteristics of these subatomic particles, it is essential to grasp how the scientists carried out these studies. Discovering how electron proton neutrons are identified by differentiating their characteristics will captivate you.

How Was the Electron Found?

The subatomic particle that is still present outside of the nucleus is an electron. The electromagnetic force of attraction holds it in place. The strong force retains an electron in its orbit despite the enormous distance between it and a nucleus. In the year 1885, Sir William Crookes made the discovery of the electron.

He heated metallic electrodes in a vacuum to conduct a number of tests. He was carrying out tests to examine how metals behave when heated in a vacuum. He had partially evacuated the glass tube in which he was heating the electrodes. A stream of extremely charged particles was seen moving from the negative electrode, or cathode, to the positive electrode of the anode when a high-voltage source was connected to the electrodes.

Crooks observed that these particles moved straight along in the absence of any external magnetic or electric fields. The subsequent investigations carried out by the other scientists led to the conclusion of a set of characteristics of these particles. An outstanding physicist named Sir J. J. Thompson created electrons and improved their physical properties.

How were protons discovered?

A perforated cathode was being used in experiments by Eugen Goldstein, who discovered protons (negative electrode). Although there is air within a glass tube with the electrodes in it, the pressure is quite low. In 1886, he tried. The electron was not found and named during this period. He crossed the electrodes with a high voltage. In that tube, he noticed a crimson glow behind the cathode. This ray was created by electrons moving in the opposite direction to that of cathode rays.

Goldstein thus unintentionally found the proton. Then, the same experiment was carried out on anodes, causing another ray to flow. When there was no electrical or magnetic field present, the particles this time possessed a large mass but still moved straight. It has been effectively explained how these subatomic particles formed in the ray.

Compared to electrons, these particles are significantly heavier. Even when different metals were employed for the same experiment, the charge to mass ratio (e/m) remained constant. Moving on, Rutherford was able to demonstrate that the hydrogen ion (H+), created in 1919 when a hydrogen atom lost an electron, shared the same characteristics as the positive particles moving and creating rays.

Finding of the Neutron After World War I

James Chadwick visited his instructor Ernest Rutherford in England. Under Rutherford's guidance, he finished his doctoral work and focused his investigations on radioactive decay. Rutherford discovered protons in atoms, but Chadwick discovered that protons weren't the only subatomic particles that might be found inside an atom's nucleus.

He then carried out his atomic disintegration experiments and discovered that while helium has an atomic number of 2, it has a mass number of 4. He came to the conclusion that only protons can contain two electrons in a helium atom after conducting a number of further experiments. As a result, other subatomic particles with a proton's mass did not carry a charge. Despite being neutral, these particles had mass. He earned the Nobel Prize in 1935 for his discovery of neutrons.

To learn more about Discoveries of protons, neutrons, and electrons

brainly.com/question/15240353

#SPJ1

Answer:

Below

Explanation:

Sunlight is more direct.   The angle of incidence is near 90 degrees most of the year.

2.33 moles of carbon dioxide are produced by the decomposition of 25.1 grams of sodium.

Molarity is a physical quantity that describes the substance's number of moles available in the unit liter volume of the solution. A mole per liter is a measurable unit to explain molarity.

Number of moles of the NaCl is

np = 3.50 mol

The volume of the solution is np = 1.50 L

The expression for the molarity solution is cm = np/vp

At the value and get the above expression

Cm = 3.50/ 1.50

      = 2.33 mol /L

Thus the molarity of the solution is 2.33 mol /L

To know more about molarity related questions click

https://brainly.com/question/14469428

#SPJ1

Martensite : A Supersaturated interstitial solid solution of carbon in Alpha iron.

Marten a solid carbon interstitial solution in iron.

It is a steel metastable phase that results from austenite's transformation at temperature below 320 °C.

A body-centered tetragonal lattice characterizes martensite, an interstitial super saturated solution of carbon in iron.

It is extremely hard and brittle with a carbon concentration of up to 2%.

Its structure is acicular or needle-like and it is the result of rapid cooling (quenching).

The degree of martensitic transformation-achieved hardness is closely related to the rate of cooling and the percentage of carbon in steel.

So, Martensite is an interstitial supersaturated solid carbon solution in alpha iron.

To learn more about Interstitial solid solution, here :

https://brainly.com/question/14760347?referrer=searchResults

#SPJ4

If one of two interacting charges is increased 3 times, the force between the charges will increase by 3 times and is therefore denoted as option B.

This is referred to as a physical property of matter that causes charged matter to experience a force when placed in an electromagnetic field and it can either be positive or negative depending on various factors and conditions.

The electrostatic force has a directly relationship with the product of the charges and is inversely related to the square of the distance between them.

This therefore means that increasing one of the charges by 3 times would also lead to a corresponding increase of the force in the same magnitude which is therefore the reason why it was chosen as the correct choice.

Read more about Charges here https://brainly.com/question/18102056

#SPJ1

Anode half reaction:2H2O ⇒4H⁺+4e⁻ +O₂

Cathode half reaction:Cu²⁺+2e⁻⇒Cu × 2

Overall cell reaction :2CuSO4+2H2O⇒2Cu +H2SO4+O2.

What is cell reaction?

Cell reaction is a term used to describe the process by which cells sense and respond to changes in the environment. It involves a complex series of chemical and physical events, often mediated by signaling molecules, which ultimately result in a response. This response can be a change in metabolic activity, gene expression, cell morphology, or even cell death. Cell reactions can be triggered by a variety of stimuli including physical signals such as temperature, light, and mechanical forces, as well as chemical signals such as hormones, growth factors, and neurotransmitters. Understanding how cells respond to different stimuli has important implications for cell biology, disease diagnosis, and the development of therapies.

For more information about cell reactions please visit:
https://brainly.in/question/12222321
#SPJ4

Condensation polymerization(B) :  A reaction in which two or more molecules joined to form a larger molecule, with the simultaneous loss of a small molecule such as water or methanol.

Classification of Polymers are based on the Source of Availability. There are three types of classification under this category, Natural, Synthetic, and Semi-synthetic Polymers.

Monomeric compounds, a molecule of any class of compounds, mostly organic, that can react with other molecules to form very large molecules, or polymers. The essential feature of a monomer is polyfunctionality, the capacity to form chemical bonds to two other monomer molecules.

Learn more about polymers on:

https://brainly.com/question/17638582

#SPJ4

The Nernst Equation Cell Potential and Concentration. Keep in mind that free energy actually changes. realizing the actual cell potential and non-standard concentrations. The steps for calculating cell potentials under unusual circumstances. For the given reaction, set up the reaction quotient. the Nernst Equation by substituting the additional information.

What is the actual cell potential, e cell, for the cell?

A concentration cell is an electrochemical device of this sort, where the only difference between the anode and cathode compartments is the concentration of a reactant. Both Ecell and the differential in Ag+ concentration between the two compartments will get smaller as the reaction goes on. The potential difference between two half cells in an electrochemical cell is measured by the cell potential, or Ecell.

To learn more about Nernst Equation from given link

brainly.com/question/13043546

#SPJ4

The density of air at exactly 35°C and 1.00 atm (assuming that air is 80.0 percent N2 and 20.0 percent O2 is 1.1 g/L.

Density is described as the substance's mass per unit of volume.

Density of a gas d is given as  = PM/ RT

where d ⟶ Density of the gas

P ⟶ Pressure of the gas

M⟶ Molar Mass of the gas

R⟶ Universal Gas Constant

T⟶ Absolute temperature

we have that the pressure of air is P=1.00 atm, and the temperature is T=35∘C=308K.  The molar mass of air can be assumed to be the weighted average of its components.

The air is 80% nitrogen and 20% oxygen, so 1 mole of air will contain 0.80 moles of nitrogen and 0.20 moles of oxygen. So, the molar mass of air will be:

Molar Mass of air= 0.80 MN2 + 0.20MO2 = 0.80 (28.00g/mol) + 0.20 (32.00g/mol) = 28.8 g/mol

Substituting the values into the equation of d = PM/ RT, we have

density = 1.1g/L

Learn more about density at: https://brainly.com/question/1354972

#SPJ1

Drift nets are a problem because when they are lost in the sea, they may continue to kill many animals.

This is referred to as a fishing technique where nets, called drift nets, hang vertically in the water column and are arranged to drift with the tide or current  without being anchored to the bottom.

In a situation whereby they are lost or left,  they may continue to kill many animals in what is referred to as ghost fishing which may lead to overexploitation and a disruption in the ecosystem thereby making it the correct choice.

Read more about Drift net here https://brainly.com/question/9570477

#SPJ1

Answer:

Hi goodmorning

To answer these questions, you can use the ideal gas law, which relates the pressure, volume, temperature, and number of moles of a gas. The ideal gas law is given by the following equation:

PV = nRT

Where P is the pressure of the gas, V is the volume of the gas, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas.

If pressure and temperature remain constant, then the volume of the gas will change inversely with the number of moles of the gas. This means that if the number of moles of the gas increases, the volume of the gas will decrease, and if the number of moles of the gas decreases, the volume of the gas will increase.

For example, in part (a), the number of moles of argon gas in the container increases by 1.80 mol, so the volume of the gas will decrease. The new volume of the gas can be calculated as follows:

V = (nRT)/P

= (1.80 mol * 8.31 J/mol*K * 300 K)/(1 atm)

= 4452 J

= 4.452 L

The total volume of the gas is then 10.00 L + 4.452 L = 14.452 L.

In part (b), the number of moles of argon gas in the container increases by a certain amount, which you can calculate using the molar mass of argon. The molar mass of argon is 39.948 g/mol, so the number of moles of argon in 25.0 g of argon is 25.0 g / 39.948 g/mol = 0.625 mol. The new volume of the gas can be calculated as follows:

V = (nRT)/P

= (0.625 mol * 8.31 J/mol*K * 300 K)/(1 atm)

= 1478.125 J

= 1.478 L

The total volume of the gas is then 10.00 L + 1.478 L = 11.478 L.

In part (c), the number of moles of argon gas in the container decreases by half, so the volume of the gas will increase. The new volume of the gas can be calculated as follows:

V = (nRT)/P

= (0.9 mol * 8.31 J/mol*K * 300 K)/(1 atm)

= 2463.9 J

= 2.464 L

The total volume of the gas is then 10.00 L + 2.464 L = 12.464 L.

In part (d), the number of moles of CO2 gas in the balloon increases by 0.50 mol, so the volume of the gas will decrease. The molar mass of CO2 is 44.01 g/mol, so the number of moles of CO2 in 4.80 g of CO2 is 4.80 g / 44.01 g/mol = 0.109 mol. The new volume of the balloon can be calculated as follows:

V = (nRT)/P

= (0.109 mol + 0.50 mol) * 8.31 J/mol*K * 300 K)/(1 atm)

= 806.36 J

= 0.806 L

The mass of given KBr is 39.151 g.

A mole (also called a mole) is a standard scientific unit used in chemistry to measure large amounts of very small entities such as atoms, molecules, or certain other particles.

A mole represents a very large number of units, 6.02214076 × 10²³. The International General Assembly for Weights and Measures defined the mole as this number in the International System of Units (SI), effective from 20 May 2019. A mole was previously defined as the experimentally determined number of atoms in 12 grams of carbon-12. The number of units per mole is also called Avogadro's number or Avogadro's constant, after the Italian physicist Amedeo Avogadro (1776–1856). Avogadro proposed that the same volume of gas under the same conditions contains the same number of molecules. This hypothesis helped determine atomic and molecular weights and led to the concept of moles.

M = n/V

n = M × V

Where,  n = number of moles

V = Volume (705 mL or 0.7 L)

M = Molarity (0.47 moles/L)

n = 0.47 × 0.7

n = 0.329 moles

Now, for the mass of solute:

n = m/Mm

m = n × Mm

Where, m = mass of solute

n = number of moles (0.329 moles)

Mm = molar mass (119.002 g/mol)

m = 0.329 × 119.002

m = 39.151 g

To know more about moles, visit:

https://brainly.com/question/28239680

#SPJ1

The boiling point of water is higher than that of hydrogen sulfide. the molecular mass of H₂S is higher than that of H₂O.

Unlike H₂O, which has a hydrogen bond, H₂S exhibits dipole-dipole attraction. Since the hydrogen bond is stronger than the attraction between the dipoles, it takes more energy to separate the molecule and form a gas, giving H₂O a higher boiling point.

Compared to hydrogen sulfide, water has a higher boiling point. Due to hydrogen bonding in H2O and the hydrogen atoms' small size and high electronegativity, the intermolecular forces between water molecules are stronger than those between H2S molecules.

To know more about boiling point visit:

https://brainly.com/question/2153588

#SPJ1