The conclusion that can be obtained from these observations is that the reaction has gone through a chemical change which produces a new substance called a precipitate.
Precipitates are solid particles (solid) that are usually formed from the agglomeration/synthesis of dissolved/suspended chemical particles in liquids. Precipitation reactions are chemical reactions that occur when a solid is separated from a liquid. Substances that are separate and insoluble in liquid are called precipitates.
Chemical reactions that produce sediment, for example, include the occurrence of carbonate compounds on the bottom of the pot when boiling water. When lime water is blown, a reaction will occur between the lime water and the carbon dioxide produced by breathing.
This question is multiple choice:
were pure substances before they were mixed.are toxic and should be handled with extreme caution.have gone through a chemical change in which a new substance called a precipitate was produced.have been stored too long and are no longer good.Learn more about Precipitation reactions at https://brainly.com/question/20469884
#SPJ4
What is the mass in grams of 9.02x10^28 atoms of Fe
Answer:
83.674 grams of Fe
Explanation:
9.02 x 10²⁸ atoms
To convert from atoms to grams, we first need to convert atoms to moles. To do this, divide the atoms by Avogadro's Number, 6.02 x 10²³
9.02 x 10²⁸ ÷ 6.02 x 10²³
= 1.498 moles of Fe
Now we need to convert moles to grams. To do this, multiply the moles by the molar mass of Fe. The molar mass can be found on the periodic table.
1.498 • 55.845
= 83.674 grams of Fe
Hope this helps!
Guiding Question: How might a long-term drought in a nearby forest impact the herbivores living in the forest?
Answer:
Drought can affect water sources, land, fish and wildlife and plant communities, and can also affect trees directly by slowing or arresting growth, and causing injury or death
Explanation:
A student performs an acid-base titration experiment to determine the amount of ascorbic acid in different brands of juice. Which solution should the student use as the base solution in this acid-base titration experiment?
A.) HCl
B.) NaOH
C.) LiBr
D.)CaCl2
Answer:
idn Mann nnnnnnnn . .....mmmmm mmmm aaaaaaa it's a
The answer is Option B, NaOH is the solution student should use as the base solution in this acid-base titration experiment to determine the amount of ascorbic acid in different brands of juice.
What is an Acid Base Titration ?
An acid–base titration is a method of quantitative analysis.
It is used for determining the concentration of an acid or base by neutralizing it with a standard solution of base or acid of known concentration.
An indicator is used to monitor the progress of the acid–base reaction.
Ascorbic acid, HC₆H₇O₆ is an acid. So can be titrated with a base , sodium hydroxide, NaOH using the indicator, phenolphthalein.
HC₆H₇O₆(aq) + NaOH(aq) → NaHC₆H₇O₆(aq) + H₂O(l)
Among the options , HCl is an acid , LiBr , CaCl₂ are salts , NaOH is the only base.
Phenolphthalein changes from colorless to pink (or red) when all of the acid gets neutralized.
Therefore NaOH is the solution student should use as the base solution in this acid-base titration experiment to determine the amount of ascorbic acid in different brands of juice.
To know more about Acid Base Titration
https://brainly.com/question/15220646
#SPJ2
MULTIPLE CHOICE QUESTION
The difference between the smooth and rough ER is
that are attached to the outside of
ER.
the
the
ribosomes, smooth
DNA, rough
DNA, smooth
Answer:
???????
Explanation:
Mention any four names of conservation area?
Answer:
pi r squared
Explanation:
The "fuel" in most combustion reactions
is a hydrocarbon. Using the examples in
Model 2, write a description for the
classification of substances known as
hydrocarbons.
Answer:
hydracarbons are substances consisting of carbon and hydrogen only
Explanation:
A gas has a volume of 5.00 L at 20 degrees Celsius. What is the volume of gas at 150 degrees Celsius.
Answer:
7.22 L
Explanation:
From the question,
Applying Charles law,
V₁/T₁ = V₂/T₂...................... Equation 1
Where V₁ = Initial volume of gas, V₂ = Final volume of gas, T₁ = Initial Temperature of gas in Kelvin, T₂ = Final Temperature of gas in Kelvin
Make V₂ the subject of the equation
V₂ = (V₁×T₂)/T₁................. Equation 2
Given: V₁ = 5.00 L, T₁ = 20 °C = (20+273) K = 293 K, T₂ = 150 °C = (150+273) K = 423 K
Substitute these value into equation 2
V₂ = (5.00×423)/293
V₂ = 7.22 L
How many grams of KOH are required to make 125mL of a 0.50M solution?
Answer:3.51 g
Explanation: M(KOH)= 39.10 + 16 + 1.008 = 56.108 g/mol
Amount of substance is n= m/M = cV and mass m= McV
Volume in litres is 0.125 l
What is the density of an object that has a mass of 10 grams and a volume of 5 mL?
Answer:
2 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]density = \frac{mass}{volume} \\[/tex]
From the question we have
[tex]density = \frac{10}{5} = 2 \\ [/tex]
We have the final answer as
2 g/mLHope this helps you
it is used to lift water from a well
Answer:
When air is admitted into the well, the water recedes from the level of static head to the bottom of the discharge pipe. The displaced column of liquid rises up the discharge pipe. Air bubbles mix with water and this reduces the specific gravity of the column of water sufficiently to lift it to the surface.
Explanation:
A majority of the world's electricity comes from water power.
True
False
Answer:
True.
Explanation:
Which object is smaller than a cell?
Molecule
Organ
Organism
Tissue
Answer:
Molecule
Explanation:
Levels of organization (atom-molecule-cell-tissue-organ-organ-system-organism)
how many moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen
Answer:
10 moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen.
Explanation:
The balanced reaction is:
N₂ + 3 H₂ → 2 NH₃
By reaction stoichiometry (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles of each compound participate in the reaction:
N₂: 1 moleH₂: 3 molesNH₃: 2 molesThen you can apply the following rule of three: if by reaction stoichiometry 1 mole of nitrogen produces 2 moles of ammonia, 5 moles of nitrogen produces how many moles of ammonia?
[tex]moles of ammonia=\frac{5 moles of nitrogen*2 moles of ammonia}{1 mole of nitrogen}[/tex]
moles of ammonia= 10
10 moles of ammonia could be obtained from a maximum of 5.0 moles of nitrogen.
Use magnitude please. I’ll give brainilest!!! Hi
Answer:ok
Explanation:why you take picture upside down
how would you prepare 500 ml of a .50m solution of naoh from a 2 m stock solution
Explanation:
i.e M = m/V(L)
M= Molarity of substance
m = number of moles of substance (i.e solute)
V(L) = volume of solution in Litres
So talking about our question molarity should be 0.5 M,volume should be 0.1 L , and we should know that Molar Mass of NaOH is 40 because Atomic mass of Sodium i.e (Na known as Natrium) is 23,Atomic mass of Oxygen (O) is 16 and Atomic mass of Hydrogen is 1.
Adding them all up gives Molecular mass of NaOH as 40
So if we solve above equation we get no of moles of NaOH present in 0.1 litres of solution
Let’s do that math
Rearranging equation we get m=M×V(L) i.e m= 0.5×0.1 =0.05. So 0.05 moles of NaOH are present in 100 ml of 0.5 Molar solution
Now we also know that to find no of moles of a substance we have a formula and it is m=W/Mw where
m = no of moles of a substance
W = Mass of substance
Mw = Molecular weight of the substance
So substituting all values and rearranging equation we get mass of NaOH as
W=m×Mw = 0.05×40=2 grams
Hence we found the required mass of NaOH as 2 grams.
Now talking about shortcut
we know as explained above M=m/V(L) and m=W/M
Substituting value of m(no of moles) in M=m/V(L) we get M=WMw×V(L)
Try substituting the values yourself and get the answer
Note :: The value of Volume should always be substituted in terms of Litre only. That is the reason i used the letter (L) at all the places with V
So thats all get the answer and comment any other problems below
Hope you got your problem solved
Thanks!!!
Which of the elements shown will form ions, what will be the charges of those ions, and why will they have those charges?
Answer:
the sodium and chlorine are the form of ion
Explanation:
because sodium have tendency to loose electron it become positive ion and chlorine has tendency to gain electron it becomes negative ion
What happens to sediments that get deposited in basins?
Sedimentary basins are regions of the Earth where long-term subsidence creates accommodation space for accumulation of sediments. As the sediments are buried, they are subject to increasing pressure and begin the processes of compaction and lithification that transform them into sedimentary rock.
Answer: Sedimentary basins are regions of the Earth where long-term subsidence creates accommodation space for accumulation of sediments. As the sediments are buried,
Explanation:Hopeits right i fount it on a site
When the volume and concentration of a base that completely neutralizes an acid is known, you can determine the concentration of the acid due to at the point of neutralization, the number of moles of acid equals the number of moles of base.
why does this happen? (btw this is describing titration) the criteria for the answer is
"Try to answer why the results occurred. If you are in chemistry, what is happening at the molecular level with bonding, electrons, etc. " WILL MARK BRAINLIEST!!!!
Answer:
30
Explanation:
Why does photosynthesis require 6 molecules of carbon dioxide and 6 molecules of water to make 1 molecule of glucose
For each molecule of glucose produced: 6 water water molecules are oxidized, and come to be the supply of electrons for carbon dioxide reduction. 6 molecules of carbon dioxide are required, one for every carbon atom in glucose. 6 molecules of oxygen are produced as a with the aid of made from water oxidation.
7.(05.02 MC)
The speed of light in four different materials is shown below:
Material Speed of light in thousand miles per second
A
140
B
78
С
186
D
12
Which material is the most dense? (4 points)
Material A
Material B
Material C
Material D
Answer:
C
Explanation:
thats the answer!! HEHEHHEHHHHSJSKSSSSJS
Answer: B or A
Explanation: Everyone is saying C and i just took the test and it is not C
when is pressure evident in daily lives?
Explanation:
When air is sucked out of a drinking straw, the air pressure inside if decreases and the atmospheric pressure outside
Answer:
The pressure of the liquid (blood) forces the liquid to move into the syringe when its plunger is withdrawn. When air is sucked out of a drinking straw, the air pressure inside if decreases and the atmospheric pressure outside forces the liquid to go inside the straw.
Which question is a scientist who studies the genetic engineering of crops most likely attempting to answer?
A. How can a more stable supply of crops be created?
В. How can natural selection create better crops?
С. How can crops be grown without a need for light?
D. How can the genetic variation of crops be increased?
Answer:
i think that it is A
Explanation:
the other ones did not make as much sense
A scientist who studies the genetic engineering of crops most likely attempting how more stable supply of crops be created. so, option A is correct.
What is genetic engineering ?Genetic engineering, often known as genetic alteration, is a technique that modifies an organism's DNA using technology developed in labs. This could entail altering a single base pair (A-T or C-G), erasing a section of DNA, or incorporating a new DNA sequence.
In order to fix genetic flaws and hence prevent or treat hereditary illnesses, gene therapy aims to change specific genes.
The goal of genetic engineering is to alter the genes to increase the organism's capabilities beyond what is typical.
The term "genetic engineering" originally applied to a number of methods for modifying or altering living things through their heredity and reproductive processes.
Thus, option A is correct.
To learn more about genetic engineering follow the link below;
https://brainly.com/question/13491558
#SPJ2
____H3PO4 + ____ KOH --> ______K3PO4 + ____H2O can someone please balance that chemical equation?
Answer:
H3PO4 + 3KOH ----> K3PO4 + 3H2O
Explanation:
The valency of K element is + 1 while that of PO4 compound is -3
Hence, at least 3 K atoms are needed to combine with PO4 to form K3PO4 compound.
Hence, the revised equation will be
H3PO4 + 3KOH ----> K3PO4 + 3H2O
Now, the number of atoms and charges of each element is a given equation are equal on both the left and right hand side.
the more the energy, the larger the (a,b,c,d)?
A:crest
B:trough
C:amplitude
D:wavelength
Answer: D:wavelenght
Explanation: Students will understand that shorter wavelengths have higher frequency and energy.
Answer:
C I believe... I might be wrong though
Explanation:
Round the following number to 3 significant figures:
15937
pls helpppp
Answer:
15900
Explanation:
I think hope this helps!! :D
Answer:
15900
Explanation:
How do you know if a material is an elernent or a compound?
Explanation:
Elements and compounds are both examples of pure substances. A substance that cannot be broken down into chemically simpler components is an element. ... A substance that can be broken down into chemically simpler components (because it has more than oneelement) is a compound.
What molecular shape is this lewis structure?
A. Trigonal pyramidal
B. Trigonal planar
C. Bent
D. Tetrahedral
E. Linear
Answer:C
Explanation: I learnet it too but more time ago hope its good
Please help me on this
Answer:
the answer is 3(decay) and
the second isa 1(alfa particle) has a mass of equal to helium nucleus
PLEASE Answer asap! What characteristics are shared by all alkali metals and alkaline earth metals?
A. They conduct electricity very well
B. They are strong and shiny
C. They form alkaline solutions when mixed with water
D. They do not react with water at all
Answer:
C
Explanation:
Mostly all of them but most likely C
The Universal Space Agency wants to know the results of your Sim investigation. Write your report to the lead chemist, explaining why there is liquid water on the outside of the can but no liquid nitrogen. Use evidence from your investigation in your explanation.
Answer:
Due to warm temperature.
Explanation:
There is water present in liquid form instead of liquid nitrogen on the outer side of the can because of the temperature present in the surrounding environment. The temperature around the can is little warm which is favourable for the water but not for the liquid nitrogen. The liquid nitrogen present in liquid state when the temperature of the surrounding is too cold. if it is warm, the liquid nitrogen starts boiling and converts into gaseous state so that's why the warmer temperature is responsible for the presence of water not the liquid nitrogen.