Answer:
The answer is 352 cubic units
Help me please I will give points
NO FAKE ANSWERS
Answer: 2,3,4
Step-by-step explanation:
Apple’s is represented by 8 and oranges is represented by 5. So the ratio 8:5 means every 8 apples their are 5 oranges
Porportion equation and solution: a punch recipe calls for 3 liters of ginger ale and 1.5 liters of tropical fruit juice how many quarts of punch will the recipe make (1 Liter = 1.6 quarts)
Answer:
The recipe will make 7.2 quarts of punch.
Step-by-step explanation:
A punch recipe calls for 3 liters of ginger ale and 1.5 liters of tropical fruit juice.
Then the recipe will make 4.5 liters of punch, obtained by the sum of ginger ale and tropical fruit juice.
The ration is the comparison of two quantities and is measured from the division of two values, then: [tex]\frac{a}{b}[/tex].
The proportion is the equality between two or more ratios. That is, [tex]\frac{a}{b}=\frac{c}{d}[/tex] equals a proportion.
In this case, being 1 L= 1.6 quarts, you have:
[tex]\frac{1.6 quarts}{1 L}=\frac{x}{4.5 L}[/tex]
Solving:
[tex]x=4.5 L*\frac{1.6 quarts}{1 L}[/tex]
x= 7.2 quarts
So, the recipe will make 7.2 quarts of punch.
(Time complexity, 20pt) For the following languages, sketch (high-level, no need to mention states) a 1-tape TM program that solves the problem and include a time analysis of your program showing how much time it takes, e.g. O(n),O(nlog n), O(n^2), O(n^3), etc.; n is the length of the input.
a) [10pt] L = {u#v: U, v E {0,1}* and u is a substring of v}
b) [CSC 389, 10pt] L = {0^2^k : for k >= 0}. E.g. 0,00,0000,00000000 € L. Note that n = 2^k.
a) Language L = {u#v: u, v ∈ {0,1}* and u is a substring of v}
b) Language L = {0^2^k : for k ≥ 0}
Time Analysis: The time complexity of this program is O(n), where n is the length of the input. This is because we only need to scan through the input string once, counting the consecutive '0' symbols, and check if the count is a power of 2.
a) Language L = {u#v: u, v ∈ {0,1}* and u is a substring of v}
To sketch a 1-tape Turing machine program for this language, we can follow these steps:
1. Start at the leftmost symbol of the input.
2. Scan to the right until we encounter the '#' symbol, marking all the scanned symbols.
3. Once we encounter the '#' symbol, start scanning to the right again, comparing each scanned symbol with the marked symbols.
4. If a match is found, continue scanning until the end of the input, ensuring that the remaining symbols match the unmarked symbols.
5. If a mismatch is found at any point, reject the input.
6. If the end of the input is reached and all symbols match, accept the input.
Time Analysis: The time complexity of this program is O(n^2), where n is the length of the input. This is because, in the worst case, we need to compare each symbol in the input string with the marked symbols, and we may need to scan through the input string twice.
b) Language L = {0^2^k : for k ≥ 0}
To sketch a 1-tape Turing machine program for this language, we can follow these steps:
1. Start at the leftmost symbol of the input.
2. Scan to the right, counting the number of consecutive '0' symbols until a different symbol is encountered.
3. If the count of '0' symbols is not a power of 2, reject the input.
4. If a different symbol is encountered, check if it is the end of the input. If it is, accept the input.
5. If a different symbol is encountered and it is not the end of the input, reject the input.
Learn more about 1-tape TM:
https://brainly.com/question/15404091
#SPJ11
Let f : R → R be a function. Define a sequence fn : R → R by 1 fn(x) = f ( x + = = (₁ + ₁/ ). n (a) Prove that if f is uniformly continuous, then fn → f uniformly. (b) Prove that uniform continuity of f is a necessary assumption to conclude that fn → ƒ uniformly. That is, give an example of a function ƒ : R → R such that f is continuous, but that fn does not converge to f uniformly.
(a) If f is uniformly continuous, then fn converges to f uniformly.
(b) Uniform continuity of f is necessary for the uniform convergence of fn to f; a counterexample is provided with a continuous f but non-uniform convergence of fn.
(a)If f is uniformly continuous, then we want to show that fn converges to f uniformly.
Given ε > 0, since f is uniformly continuous, there exists δ > 0 such that for any x, y in R, if |x - y| < δ, then |f(x) - f(y)| < ε.
Now, consider fn(x) = f(x + 1/n) for each n. We need to show that for any ε > 0, there exists N such that for all n ≥ N, |fn(x) - f(x)| < ε for all x in R.
Fix ε > 0. By the uniform continuity of f, there exists δ > 0 such that for any x, y in R, if |x - y| < δ, then |f(x) - f(y)| < ε.
Now, for any x in R, let N > 1/δ. Then for all n ≥ N and for any y = x + 1/n, we have |x - y| = |x - (x + 1/n)| = 1/n < δ.
By choosing y = x + 1/n, we have |fn(x) - f(x)| = |f(x + 1/n) - f(x)| < ε.
Since ε was chosen arbitrarily, this shows that fn converges to f uniformly.
(b) Counterexample: To show that uniform continuity of f is necessary for the uniform convergence of fn to f, we need to find an example where f is continuous but fn does not converge to f uniformly.
Consider the function f(x) = x on R. This function is continuous.
Now, let's examine the sequence fn(x) = f(x + 1/n). For any x in R, we have:
|fn(x) - f(x)| = |(x + 1/n) - x| = 1/n.
Notice that for any fixed x, as n approaches infinity, 1/n approaches 0. However, the convergence is not uniform since the choice of x affects the convergence rate.
For any ε > 0, no matter how large N is chosen, there will always exist x such that |fn(x) - f(x)| = 1/n ≥ ε, for n > 1/ε.
Therefore, fn does not converge uniformly to f(x) = x, despite f(x) being continuous.
This counterexample demonstrates that the assumption of uniform continuity of f is necessary for the uniform convergence of fn to f.
To learn more about uniform convergence visit : https://brainly.com/question/28169281
#SPJ11
Plz help me we are almost done
Answer:
1) D
2) B
Step-by-step explanation:
Hope this Helps!
:)
The sum of two numbers is 48. The second number is twice the first
Write and solve a system of equations to find the numbers.
Answer:
The equations are
X + Y = 48 ----Eq (1)
Y = 2 X -----Eq (2)
Solution of the equations and the two number are
X = 16, Y = 32
Step-by-step explanation:
Let the two numbers be X and Y
Given -
The sum of two numbers is 48.
Thus, X + Y = 48 ----Eq (1)
The second number is twice the first
Thus, Y = 2 X -----Eq (2)
Substituting the value of Y in equation (1), we get -
X + 2X = 48
3 X = 48
X = 16
Y = 2 X = 32
On a map, 1 inch equals 5.2 miles. Two house are 3.5 inches apart on the map. What is the actual distance between the house?
Answer:
18.2 miles
Step-by-step explanation:
simple multiplication:
We know that 1 inch of distance on the map is equal to 5.2 miles.
Using this knowledge we can multiply the amount of inches by the miles per inch.
5.2*3.5=18.2 miles apart
Hope this helps!!
True or False: When conducting a survey of a group of people, you must interview every person in that population A Truc B False
Yoko received a $90 gift card for a coffee store. She used it in buying some coffee that cost $8.23 per pound. After buying the coffee, she had $40.62 left on her card. How many pounds of coffee did she buy?
Answer: 6
Step-by-step explanation:
Step 1: Set up equation:
90=40.62+8.23p
^ the 'p' represents pounds.
Step 2: Subtract 40.62 from both sides
49.38 = 8.23p
Step 3: Divide both sides by 8.23 (We do this to get the variable "p" by itself)
6=p
Trust Milky. Milky Smart
Given that a^b=x, evaluate the following: a^26 PLS HELP NOW
Answer:
Step-by-step explanation:
Find the log of both the equation and the expression:
b log a = log x this can be solved for log a in terms of log x:
log x
log a = ------------
b
"Name" the second expression "y." Then y = a^26 and log y = 26 log a.
log x
Then log y = 26--------------
b
and the expression a^26 is found by taking the antilog of both sides of log y:
log y log x
10 = y = 10^(26----------)
b
Please double check to ensure that you have copied this problem down correctly.
Help ASAP I’ll give brainliest how do u find this out or how do u think we could find this out
Answer:
9526/87
Step-by-step explanation:
87·x=9,526
x=9526/87
HELPP I WILL GIVE YOU BRAINLIEST!! i think the answer is 42x + 12 but i am not sure!!
Solve for x
HELP ME PLEASEEEE
Answer:
x = 9
Step-by-step explanation:
5x + 7 = 52
5x = 52-7
5x = 45
x= 9
HELPP I WILL GIVE YIU BRAINLIEST!! i think the answer is 42x + 12 but not entirely sure!!!
Answer:
yes your answer is correct
Step-by-step explanation:
A point P(x, y) moves along the graph of the equation y = x3 + x2 + 6. The x-values are changing at the rate of 2 units per second. How fast are the y-values changing (in units per second) at the point Q(1, 8)?
The y-values are changing at a rate of 24 units per second at the point Q(1, 8).
To find how fast the y-values are changing at the point Q(1, 8), we need to calculate the derivative of the given equation with respect to x. The derivative of y = x^3 + x^2 + 6 is dy/dx = 3x^2 + 2x.
At the point Q(1, 8), we substitute x = 1 into the derivative to find the rate of change.
dy/dx = 3(1)^2 + 2(1) = 3 + 2 = 5.
Therefore, the y-values are changing at a rate of 5 units per second at the point Q(1, 8). However, the rate at which the x-values are changing is given as 2 units per second.
Thus, to determine how fast the y-values are changing with respect to time, we multiply the rate of change in y by the rate of change in x: 5 units/second * 2 units/second = 10 units/second. Hence, the y-values are changing at a rate of 10 units per second at the point Q(1, 8).
LEARN MORE ABOUT point here: brainly.com/question/32083389
#SPJ11
PLEASE HELP ASAP A glass stand to display a doll is in the shape of a right triangular pyramid. The area of the base is 40.5 square inches with a height of 15 inches. What is the volume of the glass stand
Answer: [tex]202.5\ in.^3[/tex]
Step-by-step explanation:
Given
The area of the base is [tex]A=40.5\ in.^2[/tex]
height of the triangular prism is [tex]h=15\ in.[/tex]
The volume of a triangular prism is [tex]V=\dfrac{1}{3}Ah[/tex]
The volume of given Prism is
[tex]V=\dfrac{1}{3}\times 40.5\times 15=202.5\ in.^3[/tex]
The volume of the triangular prism is [tex]202.5\ in.^3[/tex]
log(x)-log(x+6)=log(k)
Find x if k=1/2
Answer:
x = 6
Step-by-step explanation:
Using the rules of logarithms
logx - logy = log ([tex]\frac{x}{y}[/tex] )
logx = logy , then x = y
Given
log(x) - log(x + 6)
= log([tex]\frac{x}{x+6}[/tex] )
Then
log )[tex]\frac{x}{x+6}[/tex] ) = log([tex]\frac{1}{2}[/tex] ) , thus
[tex]\frac{x}{x+6}[/tex] = [tex]\frac{1}{2}[/tex] ( cross- multiply )
2x = x + 6 ( subtract x from both sides )
x = 6
Plsssss helps 50 points
Answer:
2000.2 cm³
Step-by-step explanation:
Finding the volume of a cylinder is quite simple if you under what pi (3.14) is. You can watch khan academy. It has some useful videos on solving for volume. It also explains very well. Hope this helps!
Which groups of numbers could 1/3 fall under. Natural,whole,integer,or rational
Answer:
The number 1/3 is a rational number. A rational number is any number that can be expressed as the quotient or fraction p/q of two integers, with the denominator q not equal to zero.
1/3 is not a natural number, whole number, or integer. Natural numbers are the set of positive integers (1, 2, 3, …). Whole numbers are the set of non-negative integers (0, 1, 2, 3, …). Integers are the set of whole numbers and their additive inverses (-3, -2, -1, 0, 1, 2, 3, …).
Step-by-step explanation:
Test the claim about the population mean, h, at the given level of significance using the given sample statistics. Claim: h = 30; « = 0.08; 3 = 3.31. Sample statistics: x = 28.9, n = 65 Calculate the standardized test statistic. The standardized test statistic is -2.68 (Round to two decimal places as needed.) Determine the critical value
The standardized test statistic is -2.68 and the critical value is 1.44.
Given that, Claim: h = 30 Sample statistics: x = 28.9, n = 65 α = 0.08 σ = 3.31
We need to calculate the standardized test statistic and critical value.
Test statistic: The standardized test statistic can be calculated as follows:
Z = (x - μ) / (σ / √n)
Substitute the given values in the above formula to get
Z = (28.9 - 30) / (3.31 / √65) = -2.68
Critical value: Since the level of significance α is given, we can calculate the critical value using the z-score table for standard normal distribution.
Since α is given, the right-tailed test is conducted.
The critical value is obtained by subtracting the α-level from 1 and then find the z-score value.
Let's find the z-score value corresponding to the area 0.92 in the z-score table.
We get the corresponding z-score as 1.44, which is the critical value.
Hence, the standardized test statistic is -2.68 (Round to two decimal places as needed.) and the critical value is 1.44.
To learn more about standard normal distribution
https://brainly.com/question/12892403
#SPJ11
Write down the vectors along the lines representing those pipes, find the cross product between them from which to create the unit vector n, define a vector that spans two points on each line, and finally determine the minimum distance between the lines. (Take the origin to be at the lower corner of the first pipe.) Similarly, you may also develop the symmetric equations for each line and substitute directly into your formula.
Vectors along the lines:
To find vectors along the lines, we need two points on each line. Let's denote the points on Line A as A₁ and A₂, and the points on Line B as B₁ and B₂.
Vector along Line A: v₁ = A₂ - A₁
Vector along Line B: v₂ = B₂ - B₁.
Define the vectors along the lines:
Let's say we have two lines represented by the following equations:
Line 1: r₁(t) = a₁ + t * u₁
Line 2: r₂(t) = a₂ + t * u₂
Here, a₁ and a₂ are points on the lines, and u₁ and u₂ are the direction vectors of the lines.
Find the cross product:
To find the unit vector n, we can take the cross product of the direction vectors:
n = u₁ × u₂
Note: × represents the cross product operator.
Define a vector spanning two points on each line:
Let's choose two points on each line, which we'll call b₁ and b₂. The vector spanning these points on Line 1 is given by:
v₁ = b₁ - a₁
Similarly, the vector spanning the points on Line 2 is given by:
v₂ = b₂ - a₂
Determine the minimum distance:
The minimum distance (d) between the lines can be found using the formula:
d = |(v₁ × u₂) · n| / |n|
In this formula, · represents the dot product operator, and | | represents the magnitude or length of the vector.
Alternatively, if you prefer using symmetric equations, you can substitute the equations of the lines directly into the formula to find the minimum distance.
Remember to substitute the appropriate values for a₁, a₂, u₁, u₂, b₁, and b₂ based on the specific problem you are solving.
Visit to know more about Vectors:-
brainly.com/question/28028700
#SPJ11
Which angles are supplementary to 16? Select all that apply.
Answer:
Step-by-step explanation:
15,13,11,9,1,3,5,7
Answer:
13
Step-by-step explanation:
Supplementary angles add up to 180 and angles on a straight line add up to 180 so 13
sheri’s cab fare was $32, with a 20% gratuity and no taxes. sheri's write a check to the cab driver for $40. is this a reasonable amount? explain.
In a case whereby sheri’s cab fare was $32, with a 20% gratuity and no taxes. sheri's write a check to the cab driver for $40, this can be considered as being reasonable amount because it is $1.60 more to the cab driver.
How can we know if it is reasonable?A gratuity is a sum of money that customers typically give to specific service sector employees, including those in the hotel industry, in addition to the service's base charge for the work they have completed.
Given ; Sheri’s cab fare was $32 and the percentage of gratuity is 20%
amount of gratuity = 20% 0f 32 = 6.40
The fare of the cab + gratuity = 32 + 6.40 = 38.40
Check to the cab driver for $40 , implies ($40 - $38.40)= $1.60 more to the cab driver.
Hence, it is reasonable.
Learn more about amount at;
https://brainly.com/question/11158699
#SPJ1
WHat do u do with the brainly credits or whatever
Answer:
You basically grow rep
Step-by-step explanation:
Brainly points you need for asking questions and people are more likely to trust you with their questions if you have alot!
Answer:
i actually dont know
Step-by-step explanation:
HELP ASAP!!! find the lines of symmetry. Select all that apply
Answer:
B. and D.
Step-by-step explanation:
If you folded that shape along the lines o and m, it would match up.
There are two lines of symmetry m and o. Options B and D are correct.
From the given figure we have to determine the axes of symmetries.
A line is a straight curve connecting two points or more showing the shortest distance between the initial and final points.
Here,
As of the given figure,
There are 2 axes of symmetry first line m and the other is line o.
Line l and line n are not symmetrical lines because the reflection of one portion will not be superimposed with the other.
Thus, there are two lines of symmetry m and o. Options B and D are correct.
learn more about lines here:
brainly.com/question/2696693
#SPJ2
QUESTION 45
What is the value of x?
3x
Answer:
1/67
Step-by-step explanation:
Complete question
If X+2/3x is equal to 45. find the value of x
Given the equation
x+2/3x = 45
Cross multiply
x+2 = 3x(45)
x+2 = 135x
x - 135x = -2
-134x = -2
x = 2/134
x = 1/67
Hence the value of x is 1/67
1. The three year discount factor is 0.7773 and the one year discount factor is 0.9434. Calculate the two year discount factor if the three year annuity factor is 2.6065 a. 0.9623 b. 0.8758 c. 0.9132
After considering the given data we conclude that the generated two year discount factor is 0.9132, under the condition that three year annuity factor is 2.6065.
Applying the formula for the annuity factor, we can find the two year discount factor:
[tex]annuity factor = (1 - discount factor^n) / r[/tex]
Here,
n = number of years
r = annual interest rate.
We are given that the three year discount factor is 0.7773 and the one year discount factor is 0.9434. We are also given that the three year annuity factor is 2.6065.
Applying the formula for the annuity factor, we can evaluate the annual interest rate:
[tex]2.6065 = (1 - 0.7773^3) / r[/tex]
r = 0.1
Now, we can evaluate the two year discount factor:
[tex]annuity factor = (1 - discount factor^2) / 0.1[/tex]
[tex]2.6065 = (1 - discount factor^2) / 0.1[/tex]
[tex]discount factor^2 = 0.89335[/tex]
discount factor = [tex]\sqrt(0.89335)[/tex]
discount factor = 0.9132
Therefore, the two year discount factor is 0.9132.
To learn more about annuity factor
https://brainly.com/question/30408707
#SPJ4
What nominal interest rate compounded monthly is equivalent to
2.50% compounded quarterly? Round to two decimal places
Rounding this to two decimal places, the equivalent nominal interest rate compounded monthly is approximately 2.53%.
To determine the equivalent nominal interest rate compounded monthly for a given nominal interest rate compounded quarterly, we can use the formula for nominal interest rate conversion.
The formula is:
r = (1 + i/n)^n - 1
Where:
r is the nominal interest rate compounded annually (we're looking for this),
i is the nominal interest rate compounded quarterly (2.50% in this case),
n is the number of compounding periods per year (4 for quarterly compounding).
Plugging in the values, we have:
r = (1 + 0.025/4)^4 - 1
Calculating this expression, we find:
r ≈ 0.025335
Rounding this to two decimal places, the equivalent nominal interest rate compounded monthly is approximately 2.53%.
Learn more about conversion:https://brainly.com/question/97386
#SPJ11
d = 18 in. Fine the radius or diameter of each circle with the given dimensions.
Answer:
r= 9
Step-by-step explanation:
radius (r) = diameter (D)/2
= 18/2
= 9
In a class of 30 students, 6 play an instrument and 17 play a sport. There are 9
students who do not play an instrument or a sport. What is the probability that a
student chosen randomly from the class plays neither a sport nor an instrument?
Answer:
9/30
Step-by-step explanation: