a force of 15 N is used to push a box along the floor a distance of 3 meters. find the amount of work done

According to the given statement The pressure exerted by the tooth is 506,315.78 Pa.

Pressure is a measure of the force exerted on a surface per unit area. It is a scalar quantity and is measured in units of force per unit area, such as pascals (Pa), pounds per square inch (psi), or atmospheres (atm).

It can be calculated using the formula:

Pressure (Pa) = Force (N) / Area (m²)

Given that the force exerted is 480 N and the area of contact with the tooth is 0.95 mm^2, we can use the formula to find the pressure exerted:

Pressure (Pa) = 480 N / (0.95 x 10⁻³ m²)

To convert mm² to m², we divide by 10⁶

Pressure (Pa) = 480 N / (0.95 x 10⁻³ m²) = 506,315.78 Pa

Hence, the pressure exerted by the tooth is approximately 506,315.78 Pa.

To learn more about pressure from the given link:

brainly.com/question/28012687

#SPJ4

With the Sun and Moon in this position, the side of the earth facing the moon experiences a spring high tide. Thus Option C is the answer.

A spring tide is a tide that occurs when the gravitational pull of the Moon and the Sun are in alignment. During a new moon or full moon phase, the gravitational pull of the Moon and the Sun combine to produce stronger than normal high tides and stronger than normal low tides. The term "spring tide" does not refer to the season of spring, but rather the tide's "springing forth" of water.

During a spring tide, the difference between high tide and low tide is at its greatest, and the water level rises higher and falls lower than during a neap tide. This is because the gravitational pull of the Moon and Sun are working together to produce the tide, rather than against each other. This results in a high tide that is higher than a normal high tide, referred to as a spring high tide.

It is important to note that spring tides occur twice a month, around the time of the new and full moon, when the Moon and Sun are in alignment.

Learn more about Tides:

https://brainly.com/question/29417771

#SPJ4

Put your finger over P to compute power; this leaves I and V; hence, P = I x V.

The quantity of current multiplied by the resistance equals the potential difference, which is the same as voltage. One Coulomb of charge uses one Joule of energy to move between two locations in a circuit, which is equal to a potential difference of one Volt.

Difference that might exist at all between the two points The amount of work required to move a unit positive charge along any path through one point to another without accelerating is referred to as the electric field.

To know more about electric field:

https://brainly.com/question/8971780

#SPJ1

The angle must be formed if the tension in each cable is equal to 0.75 of the frame weight is 83.6⁰.

By using the parallelogram law of vector addition, it is possible to calculate the angle between the two wires.

a² + b² - 2abcosθ = R²

Where;

R = is the outcome vector = the frame's weight ⇒ W

Angle between the two wires equals 0.75W for the first wire's tension and 0.75W for the second wire's tension.

(0.75W)² + (0.75W)² - 2(0.75W x 0.75W) cosθ = W²

1.125W² - 1.125W² cosθ = W²

= 1.125W²(1 - cosθ)

W²/1.125W² = 1 - cosθ

0.8889 = 1 - cosθ

cosθ = 1 - 0.8889

cos θ = 0.1111

θ = arc cos(0.1111)

θ = 83.6⁰

So, the angle must be formed if the tension in each cable is equal to 0.75 of the frame weight is 83.6⁰

Learn more about tension here: https://brainly.com/question/13258922

#SPJ4

Answer:

Below

Explanation:

Diameter of straw = .5 cm      then the  radius = .25 cm

AREA of the straw = pi r^2 = pi ( .25 cm)^2 = .19635 cm^2

  Now we need to find the LENGTH necessary to have a volume of 1000 cm^3

      1000 cm^3  = L * . 19635 cm^2  

      L = 5.092.958 cm       <=== your blowing covers this distance in 1.3 s

   5092.958 cm / 1.3 s = 3917.7 cm / s = 39.2 m/s

A fish under water appears to be at a different depth than it actually is due to the refraction of light as it passes through the water.

When light travels through a medium with a different index of refraction, such as air to water, it bends, or refracts. This causes objects to appear displaced, or closer or farther away than they actually are. Because water has a higher refractive index than air, light bends more when it enters the water, causing objects, like fish, to appear closer to the surface than they actually are.

The result is that the fish will appear to be deeper in the water than it actually is.

To learn more about Refraction,

https://brainly.com/question/14760207

https://brainly.com/question/29734230

The independent variable in this investigation is the type of surface which is changing whereas, the dependent variable is the mobility of earth worm.

In a experiment or investigation, there are two types of variables which are dependent and independent variable. Dependent variable are those which are dependent on other variables and are changing with respect to other variables.

Independent variables are those not dependent on any other variables and  we can change the independent variable to study the change in dependent variable.

Here, the one we studying is the mobility of earth worm which is the dependent variable and the type of surface rough or smooth is the independent variable.

Find more on independent variable:

https://brainly.com/question/1479694

#SPJ1

A very powerful vacuum cleaner has a hose 2.27 cm in diameter. The atmospheric pressure is 1.00 atm=101,300 Pa. then vacuume cleaner generate the force F = 65.1 N

A line that is straight and cuts through the middle of a body or figure. Particularly: the length of a diameter; a line segment passing through the center of a circle with its ends on the circumference.

Given,

diameter of the nose is d= 2.86 cm

radius of the nose r= 1.43 cm = 1.43× [tex]10^{-2}[/tex] m

We know F=P.A

where P is the atmospheric pressure and A is the surface area of the circulsr nose F is the force exerted by vacuume cleaner on the air

∴ F=P ( [tex]\pi r^{2}[/tex])

we know atmospheric pressure, p=1.013×[tex]10^{5}[/tex] pa

F = 1.013 × [tex]10^{5}[/tex] × 3.14 (1.43 × [tex]10^{-2}[/tex]) ^2

⇒ 65.1 N

⇒ F = 65.1 N

To know more about diameter visit:

brainly.com/question/8182573

#SPJ4

Solar energy is called renewable because it is abundant in nature and can be filled repeatedly.

Energy is power or strength that can be used for various activities. Energy cannot be created but can be changed from one form to another and can be transferred.

Solar energy is energy produced from the radiant heat of sunlight that can be utilized by all living things on earth, both humans, animals and plants. Solar energy can also be used as an alternative energy because it is environmentally friendly. This energy is included in renewable energy because the amount is abundant and endless even though it is used in large quantities.

Learn more about renewable energy at:

https://brainly.com/question/17373437

#SPJ4

The speed of the satellite in terms of kilometers per second is 455.89 km/sec

The speed of the satellite = 17,000 miles/hour

The speed of the satellite can be converted into kilometers/second by converting the miles into kilometers and then the hour into seconds

               1 miles = 1.609 km

Thus, the speed of the satellite,

          = 17,000 x 1.609 km/hour

          = 27,353 km/hr

Then, the speed of the satellite in one second is

          1 hour = 60 seconds

Thus, the speed of the satellite,

            = 27,353 x 1/60 km/sec

            = 455.89 km/sec

Thus, the speed of the satellite is 455.89 km/sec

Learn more about the speed in

https://brainly.com/question/28224010

#SPJ4

The use of a mercury thermometer is not suitable for the purpose of determining the temperature of extremely cold ice because at such low temperatures, mercury transforms into a translucent state, making it impossible to read.

Another reasons why mercury thermometer is not suitable to measure the temperature of the very cold place are:

To learn more about mercury thermometer, click here:

https://brainly.com/question/28442913

#SPJ4

The electric field in the region r ≤a is E [tex]= - \frac{r}{4\pi a^3} . \frac{Q}{e_0} r[/tex]

The total charge is enclosed within the Gaussian surface.

Q[tex]_{enc}[/tex] = 2Q - Q = Q

Therefore, applying Gauss's law over the Gaussian surface

∫[tex]_{s}[/tex]E.dS = Q[tex]_{enc}[/tex]/ε₀ ⇒ E.4πr² = Q/ε₀ ⇒ E = Q/4πε₀r²(r)

In question solution:

A[tex]_{sphere}[/tex] = 4πr²

ΦE = ∫E⋅dA

ΦE = q/ε₀

  E = q/(A⋅ε₀)

  E = q/(4πr²ε₀)

for r≤a, qin = -Q

               E [tex]= - \frac{r}{4\pi a^3} . \frac{Q}{e_0} r[/tex]

So, the electric field in the region is   E [tex]= - \frac{r}{4\pi a^3} . \frac{Q}{e_0} r[/tex]

Your question is incomplete but most probably your full question was:

A uniformly charged ball of radius a and charge −Q is at the center of a hollow metal shell with inner radius b and outer radius c. The hollow sphere has a net charge of +2Q.

Part A: Determine the electric field strength in the region r ≤a. Give your answer as a multiple of Q/E0. Express your answer in terms of some or all of the variables a, b, c, r, and the constant π.

Learn more about Gauss's law at https://brainly.com/question/14773637.

#SPJ4

The potential at the fourth point will be [tex]\frac{k^3Q}{\sqrt{L}}[/tex]

Let q1= -2Q and q2 = 6Q. ( k.)

What does charge number three's value, q3, equal?

To remedy the issue, the charges' orientation is also necessary.

You might try using the formula (kQ/r) to get the potential at the fourth corner.

Electric potential is a scalor, therefore adding the values from the three sites is as simple as adding them all together.

The effort required to transfer a unit charge against an electric field from a reference point to a specified spot. Earth is typically chosen as the reference point, however, any location beyond the range of the electric field charge can be utilized. potential electricity.

for instance, q1=-Q, L from the 4th point

q2=3Q and the fourth point's root is L.

The solution to q3= Q L from the fourth point is just [tex]-\frac{kQ}{L} + \frac{k^3Q}{\sqrt{L}} +\frac{kQ}{L} = \frac{k^3Q}{\sqrt{L}}[/tex]  (at the fourth point)

For more questions on Electric potential

https://brainly.com/question/14306881

#SPJ4

The missing diagram is attached below:

F PS-10-1-prime.gif > f before passing the horn, f PS-10-1-prime.gif < f after passing it describes the frequency f PS-10-1-prime.

Hence, Option A is correct.

To know more about railcars here

https://brainly.com/question/14652521

#SPJ4

Part A: The angular momentum of each particle about the origin

Part B: The total angular momentum of the four-particle system is 0.95 kg.m²/s.

The expression used to calculate angular momentum L is:

                             L = r x mv

Here, r is the position vector of the object m is the mass and v is the velocity vector.

According to the superposition principle, the resultant angular momentum due to many particles is the vector sum of the individual angular momentum.

L = L₁ + L₂ + L₃ + ...

Here, L₁ is the angular momentum of a particle, L₂ is the angular momentum of the particle, and so on.

In the question

Mass of a particle = 5.0 kg

vector r = (2.0i - 3.0j) m

vector v = (3.0i) m/s

Part A (seen in the picture for instruction)

For particle 1

The position vector is 2.0j m

Substitute 0.10 kg from m₁, 2.0j from r, and 2.0i m/s for v₁ in the expression of angular momentum

L = r x mv

L₁ = (2.0jm) x [(0.10 kg)( 2.0i m/s)]

L₁ = -4.0 kg.m²/s

The angular momentum for the first particle is -4.0 kg.m²/s.

For particle 2

Position vector is (2.0i - 2.0j) m

Substitute 0.20 kg from m₂, (2.0i - 2.0j) m from r, and (3.0i - 3.0j)m/s for v₂ in the expression of angular momentum

L₂ = (2.0i - 2.0j) m x [ (0.20 kg) (3.0i - 3.0j) m/s]

L₂ = 0

The angular momentum for the second particle is 0

For particle 3

The position vector is (-3.0i + 1.0j) m.

Substitute 0.30 kg from m₃,  (-3.0i + 1.0j) m from r, and  -5.0j m/s for v₃ in the expression of angular momentum

L₃ = (-3.0i + 1.0j) m x [((-3.0i + 1.0j) m) ( -5.0j m/s)]

L₃ = 1.35 kg.m²/s

The angular momentum for three particles is 1.35 kg.m²/s.

For particle 4

The position vector is 4.01i m.

Substitute 0.40 kg from m₄, 4.0i m from r, and -4.0i m/s for v₄ in the expression of angular momentum

L₄ = (4.0i m) x [(0.40 kg) (-4.0i m/s)

L₄ = 0

The angular momentum for four particles is 0.

Part B

Formula used: L = L₁ + L₂ + L₃ + L₄

The total angular momentum of the four-particle system is calculated as follows:

By superposition principle

L = L₁ + L₂ + L₃ + L₄

L = -4.0 kg.m²/s + 0 + 1.35 kg.m²/s + 0

L = 0.95 kg.m²/s

Hence, the total angular momentum of the four-particle system is 0.95 kg.m²/s.

Your question is incomplete but most probably your full question was:

Suppose the particles in the preceding problem have masses m₁ =0.10 kg, m₂=0.20 kg, m₃ = 0.30 kg, m₄ = 0.40 kg. The velocities of the particel are  v₁= 2.0i m/s,v₂= (3.0i - 3.0j) m/s,  v₃= - 1.5j m/s,  v₄= -4i m/s.

(a) Calculate the angular momentum of each particle about the origin.

(b) What is the total angular momentum of the four-particle system about the origin?

Learn more about angular momentum at https://brainly.com/question/4126751

#SPJ4

The object accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Rolling motion of any object occurs when the object starts sliding in a different methods from the other objects such as when the objects starts to roll from the ramp or any other sloppy surface and it rolls down due to the gravitational force and with many other forces such as the rolling tangential force. many forces are acting on the object at the same moment and we are just seeing the gravitational force which is playing a major portion. Hence by this information we can consider that the ball accelerates at a constant rate as it moves down the slope because of the constant gravitational force acting on it in a major portion and the rolling tangential force on the object is acting in the smaller form.

Learn more about Rolling motion:

brainly.com/question/29568301

#SPJ4

An object that falls twice as far will be moving twice as fast when it hits the ground is true.

Whath is object?
Objects are entities that have properties and state. They are the fundamental building blocks of a programming language. They are physical or abstract items that have a set of characteristics, such as a name, a type, and a value.Objects are items that can be seen and touched, such as a toy, a computer, a chair or a book. They are physical items that can be owned or interacted with. Objects can also exist in a virtual or abstract form, such as a software program or a mathematical concept. They can also be a combination of both, such as a website or a mobile app. Objects are made up of properties and behavior, which can be seen in the way they interact with other objects in the environment.

Objects can also contain other objects, known as properties. Objects can also have methods which are functions that can be performed on the object. Examples of objects in programming include variables, classes, functions, and arrays.

To learn more about object.

brainly.com/question/557206

#SPJ4

molecule possesses neutrons and a total electric charge of one Coulomb. e is the electronic value, 1.60 x 10-19 Coulombs, and the proton has a cost of +e while the electron has a fee of -e.

The quantity of charge carried by a present of one amp for one second is measured in coulombs, which is the unit of measurement used in the SI for electric charge. It may also be a quality of a substance that causes magnetic and electric effects to occur. The symbol for it is C. According to math, 1 Coulomb equals 1 Ampere x 1/sec.

A coulomb is an unit of power charge that represents the charge that is transmitted over one ampere of current in one second. Colomb's rule. depending on the charged items, electric force.

To know more about Coulomb visit :

https://brainly.com/question/12498766

#SPJ4

At the peak  it has the same potential and kinetic energy.

Kinetic energy (K.E.) is inversely proportional to the square of an object's velocity and its mass: K.E. = 1/2 m v2. When a mass is measured in kilograms and a speed is measured in meters per second, the kinetic energy is measured in kilogram-meters squared per second squared.

The velocity will be zero and the ball's displacement will be at its maximum at the highest point of the trajectory. We might state that the energy present is equivalent to the sum of the potential energy.

To know more about kinetic energy visit:-

https://brainly.com/question/15764612

#SPJ4

Answer:

Approximately [tex](-61)\; {\rm m\cdot s^{-2}}[/tex], assuming that [tex]g = 9.81\; {\rm m\cdot s^{-2}}[/tex].

Explanation:

Under the assumptions, the vehicle would be in a free fall. Acceleration would be constant: [tex]a = (-g) = (-9.81)\; {\rm m\cdot s^{-2}}[/tex].

Let [tex]u[/tex] denote the initial velocity of the vehicle. Let [tex]v[/tex] denote the velocity of the vehicle at the bottom of the drop. Let [tex]x[/tex] denote the displacement of the vehicle during the drop.

It is given that the initial velocity is [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex]. During the drop, displacement would be [tex]x = (-190)\; {\rm m}[/tex] (negative since the vehicle is below where it started.) The value of final velocity [tex]v[/tex] needs to be found.

It is known that the vehicle is moving downwards at the end of the fall. Therefore, the value of [tex]v\![/tex] would be negative. Apply the SUVAT equation [tex]v^{2} - u^{2} = 2\, a\, x[/tex] to find [tex]v[/tex] from [tex]u[/tex], [tex]a[/tex], and [tex]x[/tex].

[tex]\begin{aligned}v^{2} &= u^{2} + 2\, a\, x\end{aligned}[/tex].

[tex]\begin{aligned}v &= -\sqrt{u^{2} + 2\, a\, x} \\ &= -\sqrt{(0\; {\rm m\cdot s^{-1}})^{2} + 2\, (-9.81\; {\rm m\cdot s^{-2}})\, (-190\; {\rm m})} \\ &\approx (-61)\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

(Note that [tex]v[/tex] is negative.)

In other words, the velocity of the vehicle would be approximately [tex](-61)\; {\rm m\cdot s^{-1}}[/tex] at the end of the drop.

The correct answer to the given question is -6.944 * 10^-28 Joules

a. To find the electron's initial speed, we can use the conservation of energy. The initial kinetic energy of the electron must equal the final potential energy of the electron at its closest approach to the sphere.

Ki = 1/2 * me * v^2

v = sqrt(2Ki/me)

Ki = qe * V = (1.6 x 10^-19 C) * (-4.4 x 10^-9 C) = -6.944 x 10^-28 J

b. At the point where the speed of the electron is half of its initial value, the kinetic energy of the electron is half of its initial value. Therefore,

Ki/2 = 1/2 * me * (v/2)^2

we can solve for the distance from the surface of the sphere using the same equation as in part a, and substituting Ki/2 and v/2 for Ki and v respectively

c. The acceleration of the electron at its turning point can be found using the equation for centripetal acceleration:

a = v^2/r

where a is the acceleration, v is the speed of the electron, and r is the distance of the electron from the center of the sphere at its closest approach. We can use the value of v from part a and the distance from part b to find the acceleration.

Read more about Kinetic Energy from:

https://brainly.com/question/26472013

#SPJ4

Answer:

Approximately [tex]36\; {\rm J}[/tex].

Explanation:

Under the assumption, there is no friction to hinder the motion of the block. As a result, the increase in the kinetic energy of the block would be equal to the external work done on the block.

Let [tex]F[/tex] denote this magnitude of this force, let [tex]s[/tex] denote the magnitude displacement, and let [tex]\theta[/tex] denote the angle between this force and displacement. To find the work that this force has done on the block, use the formula:

[tex]\begin{aligned}(\text{work}) &= F\, s\, \cos(\theta)\end{aligned}[/tex].

For example, since the block in this question is moving along a horizontal table, displacement of the block would be in the horizontal direction. It is given that the angle between this force and the horizontal direction is [tex]37^{\circ}[/tex]. Thus, the angle between the force and the displacement would be [tex]\theta = 37^{\circ}[/tex].

Magnitude of this force is [tex]F = 15\; {\rm N}[/tex], while magnitude of displacement is [tex]s = 3\; {\rm m}[/tex]. The work done on this block would be:

[tex]\begin{aligned}(\text{work}) &= F\, s\, \cos(\theta) \\ &= (15\; {\rm N})\, (3\; {\rm m})\, \cos(37^{\circ}) \\ &\approx 36\; {\rm N\cdot m} = 36\; {\rm J}\end{aligned}[/tex].

Hence, the kinetic energy of this block would increase by [tex]36\; {\rm J}[/tex].

The electrical potential due to a dipole at a point P on its axis at a large distance x from the dipole is given by the formula: V = (p * x) / (4 * pi * epsilon_0 * x^2)

Where:

Learn more about the electrical potential here:

https://brainly.com/question/14306881

#SPJ4

The girl should sit 2.14 m from the center to keep the board in equilibrium.

What is equilibrium?

Equilibrium is a state in which the net force and net torque acting on an object are both equal to zero. This means that the object is either at rest or moving at a constant velocity. In other words, the object is not accelerating or rotating.

In order for the board to be in equilibrium, the sum of the forces acting on it must be equal to zero. Since the board is uniform and supported at the center, the only forces acting on it are the weights of the person and the girl.

To find the distance from the center that the girl should sit, we can set up the following equation:

F_net = 0 = (500 N)(1.5 m) - (350 N)(x)

where F_net is the net force acting on the board, x is the distance from the center where the girl is sitting, and the 1.5 m is the distance from the center where the person is sitting.

Solving this equation for x:

x = (500 N)(1.5 m) / 350 N = 2.14 m

Hence, the girl should sit 2.14 m from the center to keep the board in equilibrium.

To learn more about equilibrium from the given link:

https://brainly.com/question/1041717

#SPJ4

The number of moles in the room which has a volume of 165 m³ is 0.0686 moles

The volume of the classroom = 165 m³

The temperature of the room = 20°C

                                                 =  293 K

The pressure = 1 atm

The number of moles in the room can be found using the formula,

              PV = nRT

where P is the pressure

          V is the volume

          n is the number of moles

          R is the gas constant

          T is the temperature

Let us rearrange the above equation, we get

         n = PV/RT

Let us substitute the known values in the above equation, we get

        n = 1 x 165 / 8.21 x 293

           = 165 / 2405.53

           = 0.0686 moles

Therefore, the number of moles in the room is 0.0686 moles

Learn more about the moles in

https://brainly.com/question/26416088

#SPJ4

Deviance has an effect on social power. Then, Powerful people in society keep their power by defining the laws of deviant .

Based on the nature is divided into two kinds, namely negative behavior and positive behavior.

a. Positive deviant behavior

Positive behavior is deviant behavior that gives or has a positive impact on social life, because it has innovative elements and ideas that emerge are also creative, so as to enrich people's insights.

Positive behavior is also directed primarily at the values to be achieved together as well as social interests and is often considered as something ideal in society. Positive behavior will usually be accepted by society, because it is a form of development and adjustment to the times.

b. Negative deviant behavior

Negative behavior is the opposite of positive behavior.

Learn more about deviance at https://brainly.com/question/16022748.

#SPJ4

Answer:

a

Explanation:

Platform moves towards to west with a speed of v0/2 when the dog moves towards to east at a speed of v0, in accordance with the rule of conservation of momentum.

The speed at which an object's location changes in any direction. The distance travelled to the time needed to travel that distance is known as speed. Since speed only has a magnitude and no direction, it is a scalar quantity.

Acceleration is the method of changing a speed with which an object moves. If a substance's velocity does not change, it is not accelerating. Acceleration is a vector quantity.

To know more about Speed visit :

brainly.com/question/28224010

#SPJ4

Important Formulas:
[tex]KE=.5mv^2[/tex]

Kinetic energy(measured in joules) = .5 * mass(measured in kg) * velocity(measured in m/s)^2

__________________________________________________________

Given:

[tex]m=0.5kg[/tex]

[tex]v=22m/s[/tex]

[tex]KE=?[/tex]

__________________________________________________________

Finding kinetic energy:

[tex]KE=.5mv^2[/tex]

[tex]KE=.5(0.5)(22)^2[/tex]

__________________________________________________________

[tex]\fbox{KE = 121 Joules}[/tex]

The kinetic energy of Flying pluff is 121 KJ.

The energy that an object has as a result of motion is known as kinetic energy.  It is described as the effort required to move a mass-determined body from rest to the indicated velocity.

The body holds onto the kinetic energy it acquired during its acceleration until its speed changes. The body exerts the same amount of effort when slowing down from its current pace to a condition of rest.

Formally, a kinetic energy is any term that includes a derivative with respect to time in the Lagrangian of a system. According to classical physics, an object with mass m moving at a speed of v has kinetic energy equal to mv2.

Therefore, The kinetic energy of Flying pluff is 121 KJ.

To learn more about kinetic energy, refer to the link:

https://brainly.com/question/26472013

#SPJ2

Correct option is C)  the acceleration of gravity at that altitude is 9.75m/s².

The unit g stands for gravitational acceleration. At sea level, the standard value of g on earth's surface is 9.8 m/s2.

The following formula is used to determine the acceleration of gravity:

g= GM/r2

What G The general gravitational constant is what it is.

G is equal to 6.674x10⁻¹¹ Nm2/kg2, and M is the earth's mass:

M = 5.972x10²⁴kg

The radius of the earth plus the airplane's altitude, or r, is the distance from the earth's center in this case:

r = 6.37x10⁶ m + 20000 m equals 6.39x10⁶ m

Consequently, the acceleration in g is equal to:

(6.674x10⁻¹¹ Nm²/kg²)(5.972x10²⁴ kg) / (6.39x100m)₂

g = 9.75m/s²

To learn more about acceleration of gravity from given link

https://brainly.com/question/1528733

#SPJ4

Complete Question -

You are on an airplane traveling with a constant velocity at an altitude of 20,000m. What is the acceleration of gravity at that altitude? The earth's radius is 6.37 x 10^6m.. . A) 9.81 m/s^2. B) 9.78 m/s^2. C) 9.75 m/s^2. D) 9.72 m/s^2. E) 9.69 m/s^2.

Answer:

T (Period) = 2 π (L / g)^1/2         for a simple pendulum

L = g * T^2 / (4 π^2)

L = 9.98 m/s^2 * 9 s^2 / 39.5 = 2.27 m