Answer:
F = 880 N
Explanation:
Apply Pascal's Principle.
f / a = F / A
Because the pressure (P = F/A) is equal on both sides of the piston.
So, using the International System of Units:
f / a = F / A
88 / 0.05 = F / 0.50
F = (88/0.05) * 0.50
F = 880 N
Explain the difference
between the 4 states of
matter in terms of shape,
volume, forces, molecular
movement
In states of matter, Solid has definite shape and volume, liquid has no shape but have definite volume, gas and plasma has no shape as well as no volume.
What are the difference between different states of matter?A solid has a definite shape and volume, liquid has a definite volume, but has no specific shape. A gas has no defined shape or has no volume. Plasma is similar to a gas but a gas is neutral whereas plasma has a charge. Solids and liquids have a definite volume. Gases and plasma have no definite volume. The force of attraction between the molecules of solid is maximum, less in liquid, least in gases and very less in plasma. Gas vibrate and move freely at very high speeds. liquid vibrate and slide past each other. Solid vibrate but do not move from place to place.
So we can conclude that solid has shape and volume, liquid has volume but no shape, gas and plasma has no shape and no volume.
Learn more about matter here: https://brainly.com/question/3998772
#SPJ1
Billie travels 3.2 km due east in 0.1 hr, then 3.2 km at 15.0 degrees eastward of due north in 0.21 hr, and finally another 3.2 km due east in 0.1 hr. What is the magnitude of his average velocity for the entire trip?
Average velocity is total distance divided by total time. The magnitude of his average velocity for the entire trip is 23.15 m/s
What is Velocity ?Velocity is the distance travel in a specific direction per time taken. It is a vector quantity. And it is measured in m/s
If Billie travels 3.2 km due east in 0.1 hr, then 3.2 km at 15.0 degrees eastward of due north in 0.21 hr, and finally another 3.2 km due east in 0.1 hr. Then,
Billie total distance S travel = 3.2 + 3.2Cos 15 + 3.2
S = 9.49 Km
Billie total time T = 0.1 + 0.21 + 0.1
T = 0.41 s
The magnitude of his average velocity for the entire trip = S/T
Average velocity = 9.49/ 0.41
Average velocity = 23.15 m/s
Therefore, the magnitude of his average velocity for the entire trip is 23.15 m/s
Learn more about Average Velocity here: https://brainly.com/question/6504879
#SPJ1
A restaurant owner attaches a sign to the side of his building as shown in the image. A beam is bolted to the building to support the cable, and the cable is anchored to the end of the beam and tensioned such that it bears the full weight of the sign. The beam is exactly horizontal with respect to the earth, the upper portion of cable makes a 30.0o angle with the beam, and the mass of the sign is 10.0 kg.
Determine the magnitude of the tension in the cable
The magnitude of the tension in the cable is determined as 49 N.
What is tension force?
Force of tension is defined as the force transmitted through a rope, string or wire when pulled by forces acting from opposite sides.
The upward tension of the cable is equal to the downward weight of the beam.
Mathematically, the formula for calculating the tension in the cable is calculated as follows;
T = W sinθ
where;
W is the weight of the beam due to force of gravity pulling it downwardsθ is the angle of inclination of the cable above the horizontalT = mg sinθ
Substitute the given parameters and solve for the tension,
T = (10 kg x 9.8 m/s²) x sin(30⁰)
T = 49 N
Thus, we can conclude that the tension in the cable as it bears the full weight of the beam is 49 N.
Learn more about tension here: https://brainly.com/question/918617
#SPJ1
Mario drives his Kart at an average speed of 42 miles per hour for 1.7 minutes. How far does he drive? Include units in your answer. More information.Note: For this question and all questions on subsequent WebAssignments, answers to problems should have three significant digits and should include proper units.
Given:
The speed of Mario's kart is
[tex]v=42\text{ miles/h}[/tex]To find:
How far does he drive in 1.7 minutes?
Explanation:
The speed is,
[tex]\begin{gathered} v=42\text{ miles/h} \\ =42\times1.6\text{ km/h} \end{gathered}[/tex]The distance Mario drives is,
[tex]\begin{gathered} d=vt \\ =42\times1.6\times\frac{1.7}{60}\text{ km} \\ =1.90\text{ km} \end{gathered}[/tex]Hence, the required distance is 1.90 km.
module 2 question 10
A ship sets sail from Rotterdam, The Netherlands, heading due north at 9.00 m/s relative to the water. The local ocean current is 1.52 m/s in a direction 40° north of east. What is the velocity of the ship relative to the earth?
m/s
° N of E
The velocity of the ship heading due north at 9.00 m/s relative to the water has a velocity of 10 m / s relative to the earth.
Let S represent ship, W represent water and E represent Earth.
[tex]V_{SW}[/tex] = 9 m / s N
[tex]V_{WE}[/tex] = 1.52 m / s NE
Resolving [tex]V_{OE}[/tex] into its x and y components.
cos θ = Adjacent side / Hypotenuse
cos 40° = [tex]V_{OE}_{x}[/tex] / [tex]V_{OE}[/tex]
[tex]V_{WE}_{x}[/tex] = 0.77 * 1.52
[tex]V_{WE}_{x}[/tex] = 1.17 m / s
sin θ = Opposite side / Hypotenuse
sin 40° = [tex]V_{OE}_{y}[/tex] / [tex]V_{OE}[/tex]
[tex]V_{WE}_{y}[/tex] = 0.64 * 1.52
[tex]V_{WE}_{y}[/tex] = 0.97 m / s
[tex]V_{SE}[/tex] = [tex]V_{SW}[/tex] + [tex]V_{WE}[/tex]
[tex]V_{X}[/tex] = [tex]V_{SW}_{x}[/tex] + [tex]V_{WE}_{x}[/tex]
[tex]V_{X}[/tex] = 0 + 1.17
[tex]V_{X}[/tex] = 1.17 m / s
[tex]V_{Y}[/tex] = [tex]V_{SW}_{y}[/tex] + [tex]V_{WE}_{y}[/tex]
[tex]V_{Y}[/tex] = 9 + 0.97
[tex]V_{Y}[/tex] = 9.97 m / s
R = √ [tex]V_{X}[/tex]² + [tex]V_{Y}[/tex]²
R = √ 1.17² + 9.97²
R = √ 1.37 + 99.4
R = √ 100.77
R = 10 m / s
Therefore, the velocity of the ship relative to the earth is 10 m / s
To know more about relative velocity
https://brainly.com/question/28730797
#SPJ1
Help number five physics In the three diagrams, the circles represent small balls that carry electric charges. In Diagram A, ball 1 carries a negative charge, and ball 2 is repelled byball 1. In Diagram B, we see that ball 2 now repels ball 3. In Diagram C, we see that ball 3 now attracts ball 4. Based on these diagrams, what is theelectric charge on ball 4?
Question 5
Given:
Ball 1 has negative charge.
Ball 2 is repelled by ball 1.
Ball 2 repels ball 3.
Ball 3 attracts ball 4.
To find the electric charge on ball 4.
Explanation:
Like charges repel each other.
Example - Positive and positive charge repel each other.
Also, negative and negative charge repel each other.
Unlike charges attract each other.
Positive and negative charge attract each other.
In the first diagram, ball 1 and ball 2 repel each other which means ball 2 has negative charge.
In the second diagram, ball 2 and ball 3 repel each other which means ball 3 has negative charge.
Now, in the diagram 3, ball 3 and ball 4 attract each other which means ball 4 has positive charge.
Thus, ball 4 has positive charge.
module 2 question 11
A knife is dropped from the top of a 15.0 m high mast on a ship moving at 1.73 m/s due south.
(a) Calculate the velocity of the knife relative to the ship when it hits the deck of the ship.
m/s (down)
(b) Calculate the velocity of the knife relative to a stationary observer on shore.
m/s
° (below the horizontal to the south)
(c) Discuss how the answers give a consistent result for the position at which the knife hits the deck.
If a knife is dropped from 15.0 m high on a ship moving at 1.73 m / s
The velocity of the knife relative to the ship on the deck = -17.15 m/sThe velocity of the knife relative to a stationary observer = 17.24 m/sFor an observer on the ship, it will appear as the knife is falling straight down. So, for an observer on the ship, the knife will not have a horizontal component.
u = 0
a = - 9.8 m / s²
s = - 15 m
v² = u² + 2 a s
v² = 0 + ( 2 * - 9.8 * - 15 )
v² = 294
v = ± 17.15 m / s
[tex]v_{y}[/tex] = - 17.15 m / s ( Since it is moving downwards )
For an stationary observer on the shore, it will appear as the knife moves a certain distance along with the ship in x direction along with its y displacement. So, for an observer on the shore, the knife will have both horizontal and vertical components.
[tex]v_{i}_{x}[/tex] = - 1.73 m / s
[tex]a_{x}[/tex] = 0
[tex]v_{x}[/tex] = - 1.73 m / s
R = √ [tex]v_{x}[/tex]² + [tex]v_{y}[/tex]²
R = √ ( - 1.73 )² + ( - 17.15 )²
R = √ 2.99 + 294.12
R = √ 297.11
R = 17.24 m / s
For an observer on the ship, the knife and the ship doesn't have any x component. So the position the knife lands is straight below the point it was dropped. For an observer on the shore, it seems that both the knife and ship have an equal amount of x-component. From the point of view also, the position the knife lands is straight below the point it was dropped.
Therefore,
The velocity of the knife relative to the ship = - 17.15 m / sThe velocity of the knife relative to a stationary observer = 17.24 m / sTo know more about relative velocity
https://brainly.com/question/28730797
#SPJ1
A 55.0-kg person steps on a scale which is on a horizontal floor. What is the normal force acting on the individual by the scale?
ANSWER:
-539 N
STEP-BY-STEP EXPLANATION:
We know that the normal force is the force opposite to the force exerted by the weight, therefore, we can calculate the normal force as follows:
[tex]\begin{gathered} F_N=-W \\ W=m\cdot g \\ F_N=-m\cdot g \\ \text{ replacing:} \\ F_N=-55\cdot9.8 \\ F_N=-539\text{ N} \end{gathered}[/tex]The normal force is -539 N
Calculate the force of attraction between Mars and one of its moon named Phobos given that the mass of Phobos is 10.6 x 1015 kg and the distance from Mars is 9,376 km (convert to m). Mars has a mass 10.7% that of Earth (approx. 1/10th the mass of Earth).
The force of attraction between Mars and one of its moon; F= 5.16*10²¹
What does gravity mean?The gravitational force is the force that the earth exerts on a body to attract it. Examples of motion caused by gravitational force include the downward motion of water in rivers and streams, the upward motion of thrown objects such as balls, and the downward motion of the leaves and fruits of trees as they fall to the earth.
What is a phobos?"The bigger of Mars' two moons, Phobos, measures 17 x 14 x 11 miles (27 x 22 x 18 kilometers) in diameter. It makes three daily circuits around Mars and is so near the planet's surface that it cannot always be seen there."
according to data:The product of mass and mass is directly proportional to the gravitational force between two large objects. The gravitational attraction between Mars and Phobos is.
Newton's law of universal gravitation: Fg = Gm1m2/r2
Where,
F = Force =
G = Gravitational constant = 6.6743 × 10-11 N.m²/kg²
m2 = Mass of Mars = 6.42 x 10²³ (approx 10.7 % of Earth)
m2 = Mass of Phobos = 10.6 x 1015 r = Distance between centers of the masses= 9,376 km
Put the values in the formula,
F = 6.6743 * 10-11 * [tex]\frac{6.42 x 10^2^3 * 10.6 x 10^1^5}{ 9,376^2}[/tex] F= 5.16*10²¹
To know more about gravitational force visit:
https://brainly.com/question/12528243
#SPJ13
What is the voltage across a 100 Ω resistor with a current of 4.5 amps?
We can use the following equation to solve for V, voltage:
V = IR, where
I: current, and R: resistance
Let's plug in our known variables, current and resistance:
V = 4.5*100
Then solve for V:
V = 450V
Which of the following is NOT a way to change a rhythm?
A. Adding syncopation
B. Adding sixteenth notes
C. Adding an ostinato
D. Adding a dotted rhythm
Syncopation in music is the off-beating of all or a portion of a tune or piece of music by combining different rhythms. Adding syncopation is NOT a way to change a rhythm.
What is meant by syncopation?Syncopation in music is the off-beating of all or a portion of a tune or piece of music by combining different rhythms. Syncopation can be defined more simply as "a disruption or interruption of the regular flow of rhythm" or "the placement of rhythmic stresses or accents where they wouldn't normally occur."
By challenging our perceptions of where the beat should be, syncopation adds excitement to the music. When every note falls on the anticipated beat, this groove-inducing technique departs from the straight feel. Syncopation also draws the listener's attention. Syncopation is NOT a method of altering rhythm.
Therefore, the correct answer is option A. Adding syncopation.
To learn more about syncopation refer to:
https://brainly.com/question/696960
#SPJ4
PLS HELP
What group and period would this element be in from the picture below?
Describe how you determined it’s place.
What family does it belong to?
PLSSSS HELP
Based on the structure of the element shown, the element belongs to group 2A of the periodic table.
What are families in the periodic element?Families of elements in the periodic table refer to the elements that are found in the same vertical column in the periodic table.
The families of elements in the periodic table are also called groups.
Elements belonging to the same family in the periodic table have similarities in their properties, both physical and chemical.
The group or family to which an element belongs to depends on the number of electrons found in the valence shell of the element.
Elements in the same group have the same number of electrons in their valence shells. For example, elements in group 1A of the periodic table have one valence electron in their valence shell.
Considering the given element;
The element has three electron shells.
In the valence or outermost shell, there are 2 electrons in the atom of the element. This means that the element would belong to the family of elements that have two valence electrons, group 2A.
Learn more about the periodic table at: https://brainly.com/question/1173237
#SPJ1
A 16 kg mass travelling to the right at 5 m/s collides with a 4 kg mass travelling to the left, also at 5 m/s. When the masses collide, they stick together and move along the same line as before.
After the collision:
d) What is the total momentum of the masses?
e) What is the velocity of the masses?
Total momentum of masses after collision is : 100kgm/s
velocity of the masses after collision is : 5m/s
Explanation :
The conservation of momentum principle states that the amount of momentum within a problem domain remains constant; momentum is neither created nor destroyed, but only changed by the action of forces as described by Newton's laws of motion.
To find total momentum ,
we have to find momentum of each object .
Momentum of object with 16kg masses,
p = mv
here m = 16 kg and v = 5m/s
p1 =16×5
=80kgm/s
momentum of object with 4kg masses, and v =5m/s
p2 = 4 x 5
= 20kgm/s
total momentum is,
P = p1 + p2
80 + 20 = 100kgm/s
total momentum after collision,
100kgm/s (law of conservation of momentum)
velocity of masses is ,
total p= (m1+m2)×v
100 = (16+4)v
v = 100÷20
v = 5m/s
To learn more about momentum refer to :
https://brainly.com/question/20345538
#SPJ9
Serna
All changes saved
3. What stroke of an engine moves the piston down into the engine and causes the top of
cylinder to open and mix air and fuel?
Answer:
See below
Explanation:
INTAKE - compression - power - exhaust for a 4 stroke engine
Answer: intake
Explanation:
I took the quiz.
PLEASE HELP ME I NEED THIS ASAP
Investigating Energy Systems
Harnessing Human Energy Chapter 1 Lesson 1.2
Reasoning Tool
Possible subclaims:
The Battery System does have energy.
or
The Battery System does not have energy.
The Hand-Crank Generator System does have energy.
or
The Hand-Crank Generator System does not have energy.
The Solar Cell System does have energy.
or
The Solar Cell System does not have energy.
Evidence
(observations about whether the system does or does not have energy)
This matters because . . .
(How does this evidence support the subclaim?)
Therefore, . . .
(subclaim)
Considering the energy systems:
The Battery System does have energy because it can be used to light a bulb for example.The Hand-Crank Generator System does have energy because turning the lever generates electrical energy.The Solar Cell System does have energy because it can light a bulb.What is energy?Energy is the ability to do work.
There are several forms of energy such as:
chemical energy - energy stored in chemical bondsSolar energy - energy from the radiation of the sunLight energy - energy from the sensation of lightSound energy -Mechanical energy - there are two forms; kinetic energy and potential energyElectrical energy is the energy due to the movement of electrons.Generally, all matter possesses energy that can be used to do work.
The various forms of energy can be interconverted.
Learn more about energy at: https://brainly.com/question/13881533
#SPJ1
During the experiment, the angular velocity will be allowed to vary. If the mass of the rotating object is 5 kg and the radius of rotation is 0.2 m, what will be the angular velocity, ω, when the force sensor reads 3.4 N?
Answer: w=1.84 rad/s
Explanation:
During the experiment, the angular velocity will be allowed to vary. If the mass of the rotating object is 5 kg and the radius of rotation is 0.2 m, what will be the angular velocity, ω, when the force sensor reads 3.4 N?
first we set 3.4N = to the equation [tex]5kg(w)^{2}* .20[/tex]
solving for w [tex]w^2=17/5[/tex]
[tex]w=(\sqrt{85})/5 \\[/tex]
[tex]w=1.84391[/tex]
w=1.84 rad/s
Leah was pulling on a wagon with a force of 156N at an angle of 38 degrees. if she moves the wagon 45.5m how much work has she done
Answer:
W = 5593.3 J
Explanation:
The work can be calculated as
W = Fdcosθ
Where F is the force, d is the distance and θ is the angle.
So, replacing F = 156N, d = 45.5 m and θ = 38, we get:
W = (156N)(45.5m)(cos38)
W = (156N)(45.5m)(0.788)
W = 5593.3 J
a skier has just begun descending a 20 degrees slope. assuming that the coeffecient of the friction 0.10 calculate
acceleration of the skier
the final velocity of the skier after 8.0 s
A skier has just begun descending a 20° slope, so the Acceleration of the skier will be -4.7 m/s².
What is average velocity?Average velocity is a vector quantity. The change in position or displacement divided by the periods during which the displacement happens is known as average velocity. Depending on how the displacement is displaced, the average velocity may be positive or negative. Meters per second (m/s), the SI unit of average velocity, is used.
Average Velocity= [tex]Total\ Displacement/ Total\ Time[/tex]
According to the question,
Skier is on a 20° down slope.
Portion of weight parallel to and down slope.
f₁ = (sin20°)mg = 0.3 × mg
The friction force resists motion parallel to the slope, therefore its sign is opposite that of f1, and it is equal to the kinetic coefficient of friction times the weight's surface normal component.
f₂ = -μ(cos30°)mg = -0.9*0.8660 × mg
f₂ = -0.7794 × mg
The net force on the skier parallel to and down the slope
F = f₁ + f₂ = (0.3 -0.7794)mg
F = -0.4794 × mg
By Newton’s second law, net acceleration parallel to and down slope.
a = F/m = -0.4794 × g
For g = 9.807 m/s²,
a = -0.4794 × 9.807 = -4.7 m/s².
So, the acceleration of the skier will be -4.7 m/s².
To get more information about Average Velocity :
https://brainly.com/question/862972
#SPJ1
Indiana Jones is running from his enemies. How fast is he running if he jumps
from a 9.0m high cliff and lands at the edge of a ledge that is 1.75 m from the cliff?
The speed of Indiana Jones if he jumps from a 9.0 m high cliff and lands at the edge of a ledge that is 1.75 m from the cliff is 1.29 m / s
From the equations of motion,
s = ut + 1 / 2 at²
In vertical motion,
s = 9 m
u = 0
a = 9.8 m / s²
9 = 0 + ( 1 / 2 * 9.8 * t² )
t² = 1.84
t = 1.36 s
In horizontal motion,
a = 0
s = 1.75 m
1.75 = ( u * 1.36 ) + 0
u = 1.75 / 1.36
u = 1.29 m / s
Therefore, Indiana jones is running at a speed of 1.29 m / s
To know more about equations of motion
https://brainly.com/question/5955789
#SPJ1
Which of the following statements accurately describe a scientific law?
Answer:
Explanation:
Scientific laws or laws of science are statements, based on repeated experiments or observations, that describe or predict a range of natural phenomena.
To measure the capacitance C of a capacitor, you attach the capacitor to a battery and wait until it is fully charged. You then disconnect the capacitor from the battery and let it discharge through a resistor of resistance R. You measure the time T1/2 that it takes the voltage across the resistor to decrease to half its initial value at the instant that the connection to the capacitor is first completed. You repeat this for several different resistors. You plot the data as T1/2 versus R and find that they lie close to a straight line that has slope 7.50 μF.
What is the capacitance C of the capacitor?
The RC circuit, which is utilized in this experiment, is one of the most basic circuits that make use of a capacitor. When two conductors are linked to a charging device, the charge is passed from one conductor to the other.
When two conductors are connected to a charging device (such as a battery), the charge is transferred from one conductor to the other until the potential difference between the terminals of the charging device and the potential difference between the conductors are equal.
Capacitors are objects that have the capacity to hold electrical charge and energy. Capacitors have a wide range of uses, such as filters in DC power supplies and energy banks for pulsed lasers. Since capacitors only pass AC current and not DC current, they are used to block the DC component of a signal so that the AC component of the signal may be detected.
Plasma physics makes use of the energy-storage capabilities of capacitors. In plasma physics, short energy bursts with extremely high voltages and currents are frequently needed. A capacitor can be softly charged to the necessary voltage and then quickly discharged to yield the necessary energy.
To know more about Capacitators, refer to this link:
https://brainly.com/question/17584935
#SPJ1
50 POINTS!!!!!
A skier traveling at 31.3 m/s encounters a 20 degree slope. If you could ignore friction, to the nearest meter, how far up the hill does he go?
121 m far up the hill does he go.
Vo = 31.3 m/s
Angle [tex]\theta[/tex] = [tex]20^o[/tex]
Yo = 31.3*sin20
= 28.57 m/s.
[tex]Y^2 = Yo^2 + 2g*h = 0.[/tex]
[tex]28.57^2 - 19.6h = 0 \\19.6h = 816.4\\ h = 41.6 m.[/tex]
[tex]d*sin20 = 41.6\\ d = 121 m. -- > up \ hill.[/tex]
What is friction?Friction is a force that opposes the relative motion of solid surfaces, fluid layers and material elements that slide against each other.
There are four types of friction and they are classified as follows:
Static friction Sliding friction Rolling friction Fluid frictionApplications of friction
Friction is used when matches burn. The movement of the pistons in the cylinder is due to friction. It is possible to write on books and blackboards because there is friction between the pen and the blackboard.To learn more about friction, refer;
https://brainly.com/question/28356847
#SPJ13
A polar bear initially running at 4.0 m/s accerlerates uniformly for 18 s. If the bear travels 135 m in this time what is it's maximum speed
Answer:
Explanation:4.0-135m/ 18s = 131/18s = -7.2 m/
Calculate the energy needed to raise the temperature of 1 kg of lead (specific heat capacity of 130 J/kg °C) from 40.0 °C to 60.0 °C
The energy needed to raise the temperature of 1 kg of lead from 40 °C to 60°C will be 2600 Joules.
We can calculate the energy of a substance by using the given formula:
Q = mc∆T
where;
Q = quantity of heat absorbed or released
m = mass of the substance
c = specific heat capacity
∆T = change in temperature(°C)
Now, according to the given question, 1 kg of lead has to be raised from 40°C to 60°C and we also have the specific heat capacity(c) of lead that is 130J/kg°C.
We can calculate the energy by putting the given values in the above equation:
Q = mc∆T
= 1 × 130 × (60-40)
= 20 × 130
Q = 2600J
Therefore, the amount of energy required to raise the temperature of 1 kg of lead from 40°C to 60°C is 2600J.
Learn more about energy and specific heat capacity here:
https://brainly.com/question/28734755
#SPJ9
Two 5.0-cm-diameter metal disks separated by a 0.68-mm-thick piece of Pyrex glass are charged to a potential difference of 1800 V.
a) What is the surface charge density on the disk?
b) What is the surface charge density on the glass?
The surface charge density on the disk is 1.73 x 10⁻⁸ C/m².
The surface charge density of the glass is 9.36 x 10⁻⁵ C/m²
What is the magnitude of the charge?The magnitude of the charge is calculated as follows;
V = kQ/r
where;
V is the potential differencek is Coulomb's constantq is magnitude of the charger is the distance of separationkQ = Vr
Q = Vr/k
Q = (1800 x 0.68 x 10⁻³) / (9 x 10⁹)
Q = 1.36 x 10⁻¹⁰ C
The surface charge density of the disk is calculated as follows;
σ = Q/A
σ = Q/(4πr²)
where;
r is the radius of the disk = 5 cm / 2 = 2.5 cm = 0.025 mσ = Q/(4πr²)
σ = (1.36 x 10⁻¹⁰ )/(4π x 0.025²)
σ = 1.73 x 10⁻⁸ C/m²
The surface charge density of the glass is calculated as follows;
σ = Q/A
σ = Q/(4πr²)
where;
r is the radius of the glass = 0.68 mm / 2 = 0.34 mm = 0.00034 mσ = Q/(4πr²)
σ = (1.36 x 10⁻¹⁰ )/(4π x 0.00034²)
σ = 9.36 x 10⁻⁵ C/m²
Learn more about surface charge density here: https://brainly.com/question/17617839
#SPJ1
What forward force must the ground apply to the foot of a 60.0kg person to result in an acceleration of 1.00 m/s^2?
Answer:
F=ma
=60×1
=60N
Explanation:
straightforward formula
Module 1 question 12
Assume that an MX missile goes from rest to a suborbital velocity of 3.50 km/s in 40.0 s (the actual speed and time are classified). What is its average acceleration in m/s2?
m/s2
What is its average acceleration in multiples of g?
g
The average acceleration of the MX missile is 87.5 m/s^2. The average acceleration in multiples of g is 8.9g.
The rate at which the velocity changes is known to as average acceleration. To determine the average acceleration of an object, we divide the change in velocity by the amount of time that has passed. The formula of acceleration is,
a = (v_f - v_i)/t
Where a = acceleration, v_f = final velocity, v_i = initial velocity and t = time.
Here, the initial velocity is zero, final velocity is 3.5 km/s and time is 40.0 seconds. The acceleration will be
a = (3.50*1000 - 0)/40.0
a = 3500/40
a = 87.5 m/s^2
The value of acceleration due to gravity (g) is 9.8 m/s^2. The acceleration of the MS missile in multiples of g is,
a = 87.5/9.8
a = 8.9g
To know more about average acceleration here:
https://brainly.com/question/17352997
#SPJ1
1. A Styrofoam box (k=0.01 J/(s*m*C) containing ice water at 0 C has a total area of 0.950m^2 and walls with thickness 2.50 cm in a 35 C room. What is the heat flow through the walls?1. 13.3 W2. 0.133 W3. 0.147 W4. 14.7 W
Explanation:
The heat flow can be calculated as
[tex]Q=kA\frac{T_1-T_2}{L}[/tex]Where k is the thermal conductivity, A is the area, T1 is the temperature of the ice water, T2 is the temperature of the room, and L is the thickness.
Replacing k = 0.01 J/(s m °C), A = 0.950 m², T1 = 0°C, T2 = 35 °C and L = 2.50 cm = 0.025 m, we get
[tex]\begin{gathered} Q=(0.01\frac{J}{s\text{ m }\degree C})(0.95\text{ m}^2)\frac{0\degree C-35\degree C}{0.025\text{ m}} \\ \\ Q=-13.3\text{ W} \end{gathered}[/tex]Therefore, the heat flow through the walls is 13.3 W.
The negative sign indicates the direction of the heat flow, in this case, the heat goes to the water.
the total amount of work that must be done to compress the string against the restoring force represents the
Answer:
Potential energy.When string is stretched x is -ve and during compression x=+ve. In either cases, work will be done by spring to restore itself to the original shape. Hence, this Potential Energy is the work done against its restoring force.Which factor is a direct cause of surface currents
Answer: global wind systems
Explanation: Surface currents in the ocean are driven by global wind systems that are fueled by energy from the Sun. Patterns of surface currents are determined by wind direction, Coriolis forces from the Earth's rotation, and the position of landforms that interact with the currents.