The distance travel while accelerating is 90m
The initial velocity of the particle is 15m/s and the final velocity is 45m/s, so the change in velocity is 45m/s - 15m/s = 30m/s. The particle accelerates uniformly for 3.0s, so the acceleration is 30m/s / 3.0s >>30/3=10 that is 10m/s^2.
The distance traveled during the acceleration is equal to the average velocity times the time elapsed, so the distance traveled is (15m/s + 45m/s)/2 * 3.0s = (15+45)/2*3= 90m .
To learn more about acceleration:-
https://brainly.com/question/10307723
The type of heat transfer responsible for your computer leaving your desk very hot after you've used it for awhile?
Answer:
Conduction
Explanation:
Conduction is a process whereby heat is transfer through solid state.
Net work W would accelerate an object from rest to velocity v. What net work is needed to accelerate the object from rest to velocity 2v?
The net work that is needed to accelerate a 2.0 kg mass from rest to velocity 2v is 4.0 m/s.
What is net work done?When a force acts on a body at rest or at uniform motion in a straight line, then it starts to accelerate.
Given that, the velocity is 5.0
Time is 2 sec
The given mass is 2.0 kg
First, we calculate the acceleration
Acceleration = v / t = 10 / 5.0 = 2
From Newton's second law, we know that
force = mass x acceleration
F = ma
F = 2.0 x 2 = 4.0 m/s
Therefore, the net work that is needed to accelerate a 2.0 kg mass from rest to velocity 2v is 4.0 m/s.
To learn more about net work done, refer to the link:
https://brainly.com/question/16805351
#SPJ1
The question is incomplete. Your most probably complete question is given below:
What net force is needed to accelerate a 2.0 kg mass from rest to a velocity of 10 m/s in 5.0 s?
The position-versus-time plot of a boat positioning itself next to a dock is shown in the figure (Figure 1).
Rank the six points indicated in the plot order of increasing value of the velocity v, starting with the most negative. Rank the points in order of increasing value of the velocity. To rank items as equivalent, overlap them.
Incorrect: Try Again; 2 attempts remaining: no points deducted
The points in order of increasing value of the velocity can be ranked as:
B < C < A ≡ F < E < D.
What is velocity?The rate at which a body's displacement changes in relation to time is known as its velocity. Velocity is a vector quantity with both magnitude and direction. SI unit of velocity is meter/second.
According to the figure:
The points in order of increasing value of the velocity can be written as:
B < C < A ≡ F < E < D.
As the displacement becomes from positive to negative near point B, it has the lowest velocity and as the displacement becomes from negative to positive near point D, it has the highest velocity
Learn more about velocity here:
https://brainly.com/question/18084516
#SPJ1
The largest flowers in the world are the Rafflesia Arnoldii, found in Malaysia. A single flower is almost a meter across and has a mass up to 11.0 kg. Suppose you cut off a single flower and drag it along the flat ground. If the coefficient of kinetic friction between the flower and the ground is 0.39, what is the magnitude of the frictional force that must be overcome?
The magnitude of the frictional force that must be overcome is 42.04 N.
What is the magnitude of the frictional force?
The magnitude of the frictional force that must be overcome is calculated by applying Newton's second law of motion as follows;
Mathematically, the formula for the frictional force is given as;
F = μmg
where;
μ is the coefficient of frictionm is the mass of the flowerg is acceleration due to gravityThe magnitude of the frictional force that must be overcome is calculated as;
F = 0.39 x 11 kg x 9.8 m/s²
F = 42.04 N
Learn more about frictional force here: https://brainly.com/question/4618599
#SPJ1
Why was Silent Spring so influential at the time?
The book provided inspiration to those suffering from pesticide exposure.
It was the first book to bring awareness to global warming issues.
It was the first book that discussed the benefits of the Endangered Species Act.
It was the first time that the public was being made aware of the long-term impacts of pollution.
The reason that Silent Spring was so influential at the time is option D: It was the first time that the public was being made aware of the long-term impacts of pollution.
What is the book about?Silent Spring, a book written by Rachel Carson and published in 1962, was influential at the time because it was the first book to bring awareness to the negative impacts of pesticides on the environment and human health.
Therefore, The book provided evidence and detailed accounts of the harmful effects of pesticides on wildlife and ecosystems, and it argued that the widespread use of pesticides was unsustainable and could have long-term consequences for the environment and human health.
Learn more about Silent Spring from
https://brainly.com/question/1107586
#SPJ1
A model rocket flies horizontally off the edge of a cliff at a velocity of 50.0 m/s. If the canyon below is 100.0 m deep, how far from the edge of the cliff does the model rocket land?
My teacher provided the equations:
x= vt and y = (Vi * t)1/2* a * t^2
Yes! The second one is one of the constant acceleration equations. We know that our X and Y values are independent of each other, which is why Y doesn't matter here. We only care about the X position value since X and Y are independent! (This is an extremely important rule, trust me)
Therefore, we don't need to calculate a Y velocity or anything like that. We only need Y because we need to find time t. We can use Y to calculate time because although X and Y are independent of each other, they do share the same time traveled!
We know that [tex]V_{0,y}[/tex] = 0, since the car wasn't moving vertically initially. We also know Y initial is 100 and Y final is 0 when it hits the ground! The last thing we know is that the acceleration of any item in free fall is (usually) -9.81. Therefore, using the original Y equation that your teacher gave, we can plug things in and solve for time!
[tex]y_f=y_i+v_it+\frac{1}{2}at^2\\0=100+(0)t+\frac{1}{2}(-9.81)t^2\\-100=-4.905t^2\\t^2=20.39\\t=4.52[/tex]t = 4.52s
(Your teacher simplified the Y equation a little, so it may look slightly different from mine. I started at the original Y equation)
Now we have time! So now we can use the other equation your teacher provided. Again, remember, even though the car is now traveling through the air vertically, that does not affect its x velocity! The car is still traveling at 50m/s!
Therefore, we can just plug and chug!:
x = vt
x = (50)(4.52)
x = 226m
I hope this helps!
brandon buys a new seadoo. he goes 12km north from the beach he jumps wakes for 6km to the east what distance did he cover what was his displacement
Total distance covered by Brandon is 18 km and total displacement covered by him is 13.41 km.
Displacement: What is it?The definition of displacement is the changing of an object's position. It has a magnitude and direction and is a vector quantity. It is shown as an arrowhead that travels from the initial location to the end. An object's position changes, for instance, if it moves from position A to position B.
Distance covered by Brandon is-
12 + 6 = 18 km
Displacement covered by Brandon is-
d²= 12² + 6²
= 144 + 36
d²= 180
d = √180
d = 13.41 km.
To know more about displacement visit :
brainly.com/question/28609499
#SPJ1
A lawnmower is pushed with a force of 72 Newtons at an angle of 40 degrees from the horizontal. How much work is done to the mower if it moves 740 meters?
The work done to the mower is the product of force and the distance covered by the object which is equal to 40,811 Joules.
What is Work done?Work done can be defined as the product of external force and the distance over which the force is being applied. Work is done on an object when a force is applied to an object and the object is moved through a particular distance.
From this we can see that:
X-Component:
cos(θ) = x/F
Then,
X= F cos(θ).…..(1)
Now putting the values of F and θ in equation (1) we get,
X = 72 N × cos(40)
X = 72 N × 0.766
X= 55.15 N this is the x-component force
The work done to the mower is:
W = F × d
W = 55.15 × 740
W = 40,811 Joules
The work done to the mower is 40811 Joules.
Learn more about Work done here:
https://brainly.com/question/13662169
#SPJ1
How long does it take the Earth to spin on its axis once?
Explanation:
it takes the earth 24 hours to spin on it's axis once
a defender running away from a goalkeeper at 5m/s is hit in the back by the goal kick. the ball stops dead and the players speed increases to 5.5m/s if the ball had a mass of 500g and the player mass is 70k how fast was the ball moving?
The goal kick strikes a defender racing at 5 m/s away from a goalkeeper in the back. The ball was moving at a speed of 70 m/s if it weighed 500g and the player's mass was 70k.
Why does the goalie in a football game pull his hands back after holding the ball that has been shot towards the goal?The goalkeeper extends the amount of time he has to hold the ball by pulling his hands back. He lessens the force (rate of change of momentum) the football exerts on him by lengthening the time.
Write the formula for momentum and define it.A vector quantity, momentum. A body's momentum is equal to P=m.v if it is travelling at a speed of v while having mass m. P=mv describes the magnitude of the momentum. Because momentum is a function of mass and velocity, its unit is the product of those two quantities.
By using conservation of momentum,
Initial momentum = Final momentum
(5 x 70) + (v x 0.5) = (5.5 x 70) + (0 x 0.5)
350 + 0.5v = 385 + 0
0.5v = 35
v = 70 m/s
To learn more about Momentum visit:
brainly.com/question/24030570
#SPJ1
Rank the images showing the highest electric potential 1 energy to the lowest electric potential energy 4.
Answer:
3rd image, 2nd image, 1st image, 4th image
Explanation:
Not an easy question, tricky one
Electric potential energy is proportional to the magnitude of the charges (the higher the charges, the stronger the Electric potential energy(EPE)) and inversely proportional to the distance between the charges(the longer the distance, the smaller the EPE). U = kQq/r
EPE is positive in this case due to unlike charges.
Between distance and magnitude of the charges, magnitude of charges play a more significant effect than distance (due to Qq , both the magnitude of Q and q affect the EPE)
Hence. zoom in on the magnitude first.
3rd image has the largest + and -, hence greatest magnitude of charges, therefore highest EPE.
Between 1st and 2nd images, charges have the same magnitude, distance now comes to play. Distance between the charges is smaller for image 2 and the charges experience greater EPE. 1st image, the charges are further, hence smaller EPE.
For the fourth image, the magnitude of the charges is the smallest, hence smallest EPE.
The same 42 kg cart is pushed forward with a force of 180 Newtons. How far will it go if a total of 2500 Joules of work are done on the cart?
Important Formulas:
[tex]w=Fd[/tex]
work(measured in joules) = force(measured in newtons) * distance(measured in meters)
__________________________________________________________
Given:
[tex]m=42kg[/tex]
[tex]F=180N[/tex]
[tex]w=2500J[/tex]
[tex]d=?[/tex]
__________________________________________________________
Rearranging work formula to make distance the subject:
[tex]w=Fd[/tex]
[tex]\dfrac{w}{F} =\dfrac{Fd}{F}[/tex]
[tex]d=\dfrac{w}{F}[/tex]
__________________________________________________________
Finding distance:
[tex]d=\dfrac{w}{F}[/tex]
[tex]d=\dfrac{2500}{180}[/tex]
__________________________________________________________
[tex]\fbox{d = 13.89 meters}[/tex]
what is the normal force on a 2000N refrigerator resting on the ground
The perpendicular force that a surface applies to an item is known as the normal force. FN = m ⋅ g
What is Normal force?The perpendicular force that a surface applies to an item is known as the normal force. For instance, if you place a book on a table, a gravitational force will cause it to fall. The table pulls on the book in order to counterbalance this force and keep it from dropping. The normal force, often known as the opposing force, is denoted by the symbols FN F N or NN. "N" stands for the normal force unit (Newton).
A common illustration of Newton's third rule of motion is the normal force.
When one object applies force to another, the other applies a force in the opposite direction and of equal magnitude to the first object (action equals reaction).
Therefore, the force applied by the item to the surface is equal to the normal force. The calculations change according to the surface's slope.
The formula is as follows for an object laying on a flat surface:
FN = m ⋅ g
where
The mass of an object is m.
Gravitational acceleration is denoted by g.
The normal force (FN F N ) for an item on a flat surface is equal to its gravitational force, according to Newton's third law ( WW).
The formula is as follows for an object laying on a flat surface:
To know more about Normal Force refer to:
https://brainly.com/question/13622356
#SPJ1
*NOTE* The answers in this question are
NOT realistic. Don't second guess yourself!
A pitcher claims he can throw a 0.151 kg
baseball with as much momentum as a 3.22 g bullet moving with a speed of 1.90312 x
10° m/s.
What must be its speed if the pitcher's claim is valid?
Answer in units of m/s. Answer in units of ms.
004 (part 2 of 3) 1.0 points
What is the kinetic energy of the bullet?
Answer in units of J. Answer in units of J.
005 (part 3 of 3) 1.0 points
What is the kinetic energy of the ball?
Answer in units of J. Answer in units of J
Answer: It is not clear what is the power of 10 in the speed of the bullet but here is a general procedure for the question.
Explanation:
[tex]P_{bullet}=(3.22*10^{-3}kg)*(10^{?}m/s)\\P_{baseball}=P_{bullet}\\[/tex]
Therefore we can write:
[tex](0.151*10^{-3} kg)*v_{baseball}=(3.22*10^{-3}kg)*(10^{?}m/s)[/tex]
From this using the relationship:
[tex]v_{baseball}=\frac{(3.22*10^{-3}kg)*(10^?m/s)}{0.151*10^{-3}kg}[/tex]
I cannot give a precise answer since power of then for speed of the bullet is not clear. But using the above equation you can reach the answer. General form of the equation is therefore:
[tex]v_{baseball}=\frac{P_{bullet}}{m_{baseball}}[/tex]
Where m is the mass of the ball which is 0.151 g.
The reliability or reproducibility of a measurement is its _____
The degree of data stability when the measurement is replicated under identical circumstances is known as reproducibility or reliability.
What exactly are repeatability and reproducibility?Reproducibility determines how an entire study an experiment can be replicated, whereas repeatability assesses the variation in data made by a single equipment or human under similar circumstances.
What makes repeatability crucial?Science needs reproducibility because it enables more in-depth investigation, and replication validates our findings. There are several investigations and experiments, which result in a wide range of variables, unforeseen, and things that are either outside your influence or you cannot guarantee.
To knw more about measurement visit:
https://brainly.com/question/2107310
#SPJ1
Which of the following is not a safety tip for outdoor activities
The following which is not a safety tip for outdoor activities is to go alone for a sense of oneness with nature and is therefore denoted as option A.
What is Safety?This is referred to as the condition of being protected from harm or other danger and it involves the use of various methods and activities and an example is to ensure that a basic first aid kit is available so as to help in the incident of an injury.
However going alone for a sense of oneness with nature is not a safety tip as should in case any issue arises there will be no one to support and rescue such individual.
Read more about Safety here https://brainly.com/question/8430576
#SPJ1
The full question is:
Which of the following is not a safety tip for outdoor activities
a. go alone for a sense of oneness with nature
b. bring a basic first aid kit
c. bring a flashlight or headlamp
d. pack plenty of water and energy-dense food
A 10 kg box is on an inclined plane that is 40 degrees above the horizontal. It is sliding
down with a constant velocity.
a. Draw a free body diagram with Fg, FN, F₂ and Ff.
b. What is the weight of the box?
What is the normal force of the box?
c. What is the force of friction acting on the box?
d. What is the net force acting on the box?
A horizontal force of 10.0 N is acting on a 10 kg box that is sliding to the right along the floor with velocity v.
What are the assumptions for drawing a free-body diagram?Most people make the common assumptions of rigid body action and ignoring air resistance and friction. In statics, all forces and moments must balance to zero; if they don't, the body is accelerating and the laws of statics do not apply, according to the physical interpretation.
The specific situation and the presumptions used will determine how many forces and moments are displayed. Most people make the common assumptions of rigid body action and ignoring air resistance and friction.
In statics, all forces and moments must balance to zero; if they don't, the body is accelerating and the laws of statics do not apply, according to the physical interpretation. The resultant forces and moments in dynamics can have non-zero values.
To be learn more about Free body diagram visit:
https://brainly.com/question/30054881
#SPJ1
What are the names and number of of atoms in a molecule of nitrous oxide,N2O?
Answer:
2 nitrogen and 1 oxygen,
Explanation:
N2=2 nitrogen
O= a single element
Part E
Once you complete your outline, write a 500- to 750-word paper using word processing software. Add a works cited page at the end to give credit to your sources. Submit your completed paper along with this activity to your teacher for evaluation.
A Voyage to Proxima Centauri
Proxima Centauri is the second closest star to our solar system, which makes scientists curious to know more about it. What do we know about Proxima Centauri? How did we discover this information? Is it possible for humans to travel to this star? In this task, you will research and write a 500- to 750 word paper that answers these questions. Follow these steps to complete your research and writing. This guide about the research process can help.
Estimated time to complete: 3 hours
Part A
The goal of your paper is to describe the history of the discovery and research of Proxima Centauri. Another goal is to find the possibilities of traveling to this star. Some questions that your paper should answer are:
When was Proxima Centauri discovered?
How was Proxima Centauri discovered?
How have scientists researched Proxima Centauri?
What technologies have they used? What types of data do these technologies collect?
Have spacecraft ever reached this star?
What are the limitations of sending spacecraft to Proxima Centauri?
What accommodations would humans need to travel to Proxima Centauri?
Proxima Centauri otherwise known as Alpha Centauri C, is the closest star to our solar system, located about 4.24 light-years away. It was discovered in 1915 by Robert Innes, the director of the Union Observatory in South Africa. Innes identified Proxima Centauri as a possible member of the Alpha Centauri system after noticing that the star had a similar proper motion to Alpha Centauri A and B.
Proxima Centauri was first observed through telescopes, which allowed scientists to study the star's spectra and estimate its distance from Earth. In the following decades, scientists continued to study Proxima Centauri through telescopes, including the Hubble Space Telescope, which provided high-resolution images of the star.
In 2016, the European Southern Observatory announced the discovery of an exoplanet orbiting Proxima Centauri, called Proxima Centauri b. This discovery was made using the radial velocity method, which measures the star's small wobbles caused by the gravitational pull of an orbiting planet.
What are the major challenges facing the discovery of Proxima Centauri?Despite the advances in our understanding of Proxima Centauri, no spacecraft have ever reached this star. The distance between Proxima Centauri and Earth is so vast that it would take tens of thousands of years to reach the star using current propulsion technology.
One potential solution to this problem is the use of interstellar travel, which would allow humans to travel to Proxima Centauri within a human lifetime. There are several proposed methods for interstellar travel, including using a starship propelled by fusion engines or a massive light sail pushed by a beam of lasers. However, these technologies are still in the theoretical stage and have not yet been developed.
There are also many other challenges that must be overcome in order for humans to travel to Proxima Centauri. For example, humans would need to find a way to protect themselves from the high levels of radiation that they would be exposed to during the journey. They would also need to find a way to provide enough food, water, and other resources to sustain themselves for the duration of the trip.
Overall, while it is theoretically possible for humans to travel to Proxima Centauri, it would be a massive undertaking that would require significant technological advancements and the development of new solutions to many challenges.
Sources of Works Cited include:
"Proxima Centauri." Wikipedia, Wikimedia Foundation, 5 Jan. 2021,
"Proxima Centauri b." Wikipedia, Wikimedia Foundation, 20 Nov. 2020,
"Interstellar Travel." Wikipedia, Wikimedia Foundation, 4 Jan. 2021,
Therefore, the correct answer is as given above
learn more about Proxima Centauri: https://brainly.com/question/21107590
#SPJ1
A force of 20 Newtons moves a box 2.0 meters and does 40 N*m of work. How many Joules is this?
1 N*m = 1 Joule
40 N*m = 40 joules
What is resistance? How does the resistance of a long wire compare with the resistance of a short wire? How does the resistance of a thick wire that has a large cross-sectional area compare with the resistance of a thin wire?
Answer:
The opposition offered by the conductor to the current flowing through it is known as resistance.
we know,
Resistance is directly proportional to the length of the conductor.Hence,the resistance offered by the long wire will be more than that of the short wire.
Also, Resistance is inversely proportional to the area of cross section of conductor.So,The Resistance in the thick wire will be less than that of the thin wire.
*Mark me brainliest.
Two carts of equal mass are on a horizontal surface with negligible friction. Cart A is approaching cart B, which is at rest, as shown in Figure 1 above. Attached to cart B is a spring that is initially compressed. At the moment cart A collides with cart B, the spring is released and pushes on cart A, as shown in Figure 2 above. Which of the following correctly states what happens to the kinetic energy and the momentum of the two-cart system as a result of the collision compared to those quantities before the collision?
(A) Kinetic energy: Increases; Magnitude of Momentum: Decreases
(B) Kinetic energy: Increases; Magnitude of Momentum: Stays the same
(C) Kinetic energy: Increases; Magnitude of Momentum: Increases
(D) Kinetic energy: Stays the same; Magnitude of Momentum: Decreases
(E) Kinetic energy: Stays the same; Magnitude of Momentum: Stays the same
The option that correctly states what happen to the kinetic energy and the momentum of the two-cart system as a result of the collision compared to those quantities before the collision is
B) Kinetic energy: Increases; Magnitude of Momentum: Stays the same
What is kinetic energy?The energy an object has as a result of motion is known as kinetic energy. A force must be applied to an object in order to accelerate it. We must put in effort in order to apply a force.
Since the elastic potential energy that was initially stored in the compressed spring has now been converted into kinetic energy, the system's total energy should be conserved. As a result, the system's kinetic energy increases. As a result, the system's kinetic energy rises.
The magnitude of the two-cart system's net momentum remains constant because there is no outside force acting on it, which implies that the system's overall momentum should be conserved.
Therefore, the correct option is B.
Learn more about energy on:
https://brainly.com/question/25959744
#SPJ1
A Ferris wheel, rotating initially at an angular speed of 0.16 rad/s, accelerates over a 8.0-s interval at a rate of 0.040 rad/s2. What is its angular speed after this 8.0-s interval?
Answer:
0.48 rad/s
Explanation:
We can use this equation to find the final velocity
[tex]w_f=w_0+at[/tex]
We are given
[tex]w_0=0.16[/tex]
[tex]t=8.0[/tex]
[tex]a=0.04[/tex]
Inserting those numbers into our equation gives us
[tex]w_f=0.16+0.04*8[/tex]
Lets solve for [tex]w_f[/tex].
[tex]w_f=0.16+0.32[/tex]
[tex]w_f=0.48[/tex]
A barefoot field-goal kicker imparts a speed of 22 m/s to a football initially at rest. If the football has a mass of 0.42 kg and the time of contact with the ball is 0.023 s, what is the magnitude of the force exerted by the ball on the kicker’s foot? Answer in units of N
Explanation:
Mass of the football = 0.49 kg
Initial velocity of the ball ,u= 0 m/s
Final velocity of the ball ,v= 44 m/s
time of contact ,t = 0.028 seconds
First law of motion:
v=u+at
44 m/s=0+a\times 0.028 sec44m/s=0+a×0.028sec
a=1,571.42 m/s^2a=1,571.42m/s
2
force=mass\times acceleration=0.49 kg\times 1,571.42 m/s^2=769.99Nforce=mass×acceleration=0.49kg×1,571.42m/s
2
=769.99N
The magnitude of the force exerted by the ball on the kicker's foot is of 769.99 Newtons.
What are the horizontal and vertical components of a cat's displacement when the cat has climbed 5 m
directly up a tree © = 90°? Sin90=1
cos90=0
The horizontal component of the cat's displacement, Dx = 0 m
The vertical component of the cat's displacement, Dy = 12 m
What are the horizontal and vertical components of a vector?The horizontal component of a vector is the value of that vector acting in the horizontal direction.
The horizontal component of a vector is given as Dx.
Dx = Dcosθ
where;
D is the resultant of the vector
θ is the angle of the vector from the horizontal
The horizontal component of the cat's displacement is:
Dx = 12 * 0
Dx = 0 m
The vertical component of a vector is the value of that vector acting in the vertical direction.
The vertical component of a vector is given as Dy.
Dy = Dsinθ
where;
D is the resultant of the vector
θ is the angle of the vector from the horizontal
The vertical component of the cat's displacement is:
Dy = 12 * 1
Dy = 12 m
Learn more about horizontal and vertical components at: https://brainly.com/question/26446720
#SPJ1
Manipulation of equations:
mAvAi+mBvBi=mAvAf+mBvBf
Find mA
The value of mA is the equation of conservation of linear momentum is determined as mA = [ mB (vBi - vBf) ] / [ (vAf - vAi ) ].
What is the principle of conservation of linear momentum?
The principle of conservation of linear momentum states that in a closed or isolated system, the total momentum of the system is always conserved.
Mathematically, the formula for the principle of conservation of linear momentum is given as;
Pi = Pf
where;
Pi is the initial momentum of the systemPf is the final momentum of the systemmAvAi + mBvBi = mAvAf + mBvBf
where;
mA is the mass of the object AmB is the mass of the object BvAi is the initial velocity of object AvBi is the initial velocity of object BvAf is the final velocity of object AvBf is the final velocity of object BTo find the value of mA, we will make mA the subject of the formula as follow;
mAvAf - mAvAi = mBvBi - mBvBf
mA (vAf - vAi ) = mB (vBi - vBf)
mA = [ mB (vBi - vBf) ] / [ (vAf - vAi ) ]
Learn more about conservation of linear momentum here: https://brainly.com/question/7538238
#SPJ1
What is the power of a lightbulb that has a current of 0.480 A at 120.0 V?
Answer:
The power is 57.6 watts
Explanation:
We can use the Electric Power Equation to evaluate the power.
Electric Power Equation
[tex]P=IV[/tex]
[tex]P[/tex] is the power in watts
[tex]I[/tex] is the current in amps
[tex]V[/tex] is the voltage in volts
Our lightbulb has current of 0.480 A and a voltage of 120.0 V.
[tex]I=0.480\\V=120.0[/tex]
Now we can evaluate power.
Substitute our values in for the variables.
[tex]P=0.480*120[/tex]
[tex]P=57.6[/tex]
QUESTION 4
A student lifts a 400 N sandbag 2 meters off the ground. How much work, in joules, did the student perform?
Answer:
800J
Explanation:
W = Fs, Work equals force times displacement
in this case, the force is 400N and the displacement is 2 meters.
The regular SI unit for work is joules
If an object is moving and the sum of all the vector forces on it is zero, then the object will:
accelerate at a constant rate
come to rest
move at a constant speed
none of the previous
If an object is moving and the sum of all the vector forces on it is zero, then the object will move at a constant speed. The correct option is c.
What is vector force?A force's magnitude and direction are both represented by a force vector. This contrasts with expressing the force's magnitude alone, which is known as a scalar quantity.
Typically, a vector is represented by an arrow that points in the direction of the force and has a length proportionate to the strength of the force.
Therefore, the correct option is c, move at a constant speed.
To learn more about vector force, refer to the link:
https://brainly.com/question/13492374
#SPJ1
A student pours a spoonful of dirt into a cup of water. The water and dirt are stirred together. The water turns a light brown color. Some dark pieces float to the top of the cup and another dark layer forms on the bottom of the cup. Which statement BEST describes the contents of the cup?
The statement that is correct is that the contents of the cup form a mixture.
What is the nature of the cup?Though the question is incomplete but I would try to give you a good explanation as much as I can. We must recall that when we talk about a mixture, we have to note that the term mixture would refer to the combination of two or more substances that do not chemically react together.
In this case, we have been told that we have a water that was pure and then we add dirt to it. It is clear that the water and the dirt do not react in any way hence what we have formed is a mixture.
Learn more about mixtures:https://brainly.com/question/24898889
#SPJ1