What type of reaction in the diagram?
B.Fission,because the reaction absorbed energy
C.Fusion,because the reaction formed heavier nuclei
D.Fission,because the reaction formed lighter nuclei
Answer:
b, i think
Explanation:
Which statement is true?
Every magnesium (Mg) atom has atomic number of 12.
Every magnesium (Mg) atom has a mass number of 24.
this is science but i just put physics
Answer:
Every magnesium (Mg) atom has atomic number of 12.
Explanation:
Magnesium (Mg) is a chemical element of great importance for plants, animals, and humans.
Alkaline earth metal, magnesium is obtained by electrolysis of magnesium chloride solution.
Magnesium burns with a shining flame. Magnesium is a good reducing agent. This property is used to obtain some other metals.
What kind of waves are light waves and radio waves
Answer:
Electromagnetic waves
Explanation:
A phone's weight is 50 Newtons. It is on top of a
.75m table. How much Potential Energy does it have?
Two skaters A and B. having masses 50 kg and
70 kg respectively, stand facing each other 6 m
apart on a horizontal smooth surface. They pull
on a rope stretched between them. How far does
each move before they meet?
(A) both move 3 m
(B) A moves 2.5 m and B moves 3.5 m
(C) A moves 3.5 m and B moves 2.5 m
(D) both move 4 m
(E) none of the above
Answer:
Explanation:
Hell im good dude
newtons _ law of motion states that every action has an equal and opposite reaction
Answer:
3rd
Explanation:
3rd
how has evidence changed our views on the universe
Answer:
We found out more about how the universe had started (Big Bang theory), how the planets were created and how stars are born.
Which is the metric standard for measuring energy?
Which unit is used for specific heat capacity?
If you wanted to compare the abilities of olive oil and peanut oil to gain or lose thermal energy, which unit would you use?
Answer:
1. Joule
2. Specific heat capacity is defined as the amount of heat required to raise the temperature of 1 kilogram of a substance by 1 kelvin (SI unit of specific heat capacity J kg−1 K−1).
3. heat capacity units
Heat is a thermal energy, so by using heat capacity units you can compare the ability of olive oil and peanut oil to gain or lose thermal energy by varying its temperature.
Answer:
Which is the metric standard for measuring energy?
✔ joules
Which unit is used for specific heat capacity?
✔ J/g°C
If you wanted to compare the abilities of olive oil and peanut oil to gain or lose thermal energy, which unit would you use?
✔ J/g°C
Explanation:
did it on edge 2023
Identify the particle that is NOT a subatomic particle.
es
A)
electron
B)
neutron
C
positron
D)
proton
Answer:
C
positron
Explanation:
A 250-kg moose stands in the middle of the railroad tracks in Sweden, frozen by the lights of an oncoming 10,000kg train traveling at 20m/s. Even though the engineer attempted in vain to slow the train down in time to avoid hitting the moose, the moose rides down the remaining track sitting on the train’s cowcatcher. What is the final velocity of the train and moose after the collision?
(Momentum & Impulse)
Answer:
The final velocity of the train and the moose after collision is approximately 19.51 m/s
Explanation:
The given mass of the moose, m₁ = 250 kg
The velocity of the moose, v₁ = 0
The mass of the oncoming train, m₂ = 10,000 kg
The velocity of the train, v₂ = 20 m/s
The velocity of the moose and the train after collision = v₃
By the principle of conservation of linear momentum, the total initial momentum before the collision = The total final momentum after collision
m₁·v₁ + m₂·v₂ = (m₁ + m₂)·v₃
Therefore, by substitution, we have;
250×0 + 10,000× 20 = (10,000 + 250) × v₃
200,000 = 10,250 × v₃
v₃ = 200,000/10,250 ≈ 19.51 m/s
The final velocity of the train and the moose after collision = v₃ ≈ 19.51 m/s
Cellular respiration occurs in the body 24 hours per day. During exercise, the rate of cellular respiration increases. Why does increased cellular respiration cause people to breathe faster?
More oxygen is needed to produce energy, and more carbon dioxide waste must be removed from the body.
More nutrients are needed to produce more energy, and more oxygen must be removed from the body.
More heat is generated by the body, and breathing cools the body quickly.
More water is lost from the body, and breathing hydrates the body.
Answer: I think is C
Explanation:
Answer: more oxygen is needed to produce energy
How do bubbles support the atomic theory?
A. The bubbles are lighter than air.
B. There is matter that cannot be seen inside the bubbles.
C. The bubbles will burst before long.
D. The bubbles cannot be broken into smaller pieces.
Answer:
The answer is probably B or C
Option B supports the atomic theory. Thus, this option is correct.
Atomic theory is the theory which states that matter is composed of particles called atoms. It tells us that all the matters are made of very tiny particles called atoms and all atoms of the same kind have the same size in any object.
Let's look at all the options given,
A-The bubbles are lighter than air- The bubble consists of water and air thus they are not lighter than air. This statement does not tell anything about the atomic theory. Hence this option is not correct.B. There is a matter that cannot be seen inside the bubbles-The bubble is made up of two kinds of atoms one is oxygen and another is hydrogen. When we feel air into a soap bubble solution molecules want to attract to each other again so they wrap around the burst of air to attach to each other again. These atoms cannot be seen inside the bubbles but this option support the atomic theory. Thus, this option is correct.C. The bubbles will burst before long-In the bubble there is water. When this water loss in some way the bubble pops up. This water can be lost when it comes to contact with dry fingers or objects. It can be burst when the atmosphere is very dry. All the atoms are attracted towards. D. The bubbles cannot be broken into smaller pieces-This option does not support the atomic theory thus this is not the correct option.
Hence the option B supports the atomic theory. Thus, this option is correct.
For more about the atoms follow the link below-
https://brainly.com/question/13981855
A car weighing 19600N is moving with a speed of 30 m/sec on a level road. If it is brought to rest in a distance of 100 m. Find the average distance friction force acting on it
Answer:
F = -8820 N
Explanation:
Given that,
The weight of a car, W = 19600 N
Initial speed of the car, u = 30 m/s
It is brought to rest, final velocity, v = 0
Distance, d = 100 m
We need to find the average friction force acting on it.
Firstly we find the acceleration of the car using third equation of motion. Let it is a.
[tex]v^2-u^2=2as\\\\a=\dfrac{v^2-u^2}{2d}\\\\a=\dfrac{(0)^2-(30)^2}{2\times 100}\\\\=-4.5\ m/s^2[/tex]
Average frictional force,
F = ma
m is mass, [tex]m=\dfrac{W}{g}=\dfrac{19600\ N}{10\ m/s^2}=1960\ kg[/tex]
F = 1960 kg × -4.5 m/s²
= -8820 N
So, the average friction force acting on it is 8820 N.
Calculate What is the atomic number of
a sodium atom that has 11 protons and 12 neutrons
Answer:
11 because the number of protons is the atomic humber
Explanation:
The masses of four vehicles and the net forces acting on them as they enter a highway are recorded in the table below. Vehicles Entering a Highway Vehicle Mass (kg) Force (N) Sedan 1500 4500 Coupe 1200 4500 SUV 1800 4500 Truck 2000 4500 Which vehicle has the greatest acceleration as it enters the highway?
Answer:
Coupe
Explanation:
It has the least amount of mass
The acceleration of each vehicles with same force decreases with an increase in mass. Thus, the vehicle with greatest acceleration is the light vehicle which is coupe here.
What is acceleration?Acceleration of a body is the rate of change of its velocity. Acceleration is a vector quantity thus it is characterized by its magnitude and direction. The acceleration of a body depends on the mass, speed and the force acting on the body.
According Newton's second law of motion, the force acting on a body is the product of its mass and acceleration.
Thus, F = ma.
Force increases with both acceleration and mass.
From this relation, it is clear that the mass and acceleration of a body are in inverse relation. Thus, a massive body requires more force to accelerate it.
Here all the vehicles have equal force on it but their masses are different. The greater mass is for truck here which is associated with least acceleration anb the light vehicle, coupe will have the greatest acceleration.
To find more on acceleration, refer here:
https://brainly.com/question/12550364
#SPJ5
I need help with science homework
Answer:
4. atmosphere and geosphere
5. atmosphere and hydrosphere
6. hydrosphere and geosphere (? not sure about this one sorry)
7. hydrosphere and geosphere
8. biosphere and geosphere
(Blank) is caused by plate motion.
It’s please help.
Answer:
heat
Explanation:
URGENT! 40 POINTS! For each situation below, find the work done on the box using both energy and forces.
1. A 2 kg box initially at rest slides down a frictionless ramp (at 15ᵒ from the ground) for
1 second.
2. A 2 kg box is thrown upward with an initial speed of 3.5 m/s. Consider the box from
the time it was thrown until it reaches its maximum height.
3. A 2 kg box is dropped from an initial height of 10 m.
I have some physics, I just don't know what formulas to use or where to start. Help is much appreciated.
Answer:
i’m not sure one second let me try to figure it out
Explanation:
PLEASE ANSWER QUICK!
Meiosis is a process that contributes to______
A. the production of somatic cells.
B. asexual reproduction.
C. creation of organisms with unique characteristics.
To control whether an object is solid or incorporeal (things can pass through it) you would use the:
Answer:
Gamma radiation or Cathode rays
Explanation:
by striking incident gamma or cathode rays onto the solid when placed on a photographic plate
What type of sonar causes loud noises in the water?
Answer:
low frequencies
Explanation:
The type of sonar that causes loud noises in the water is known as active sonar.
Active sonar is a system that emits sound waves into the water and listens for their reflections to detect objects and measure distances. It works by sending out a pulse of sound, which travels through the water and reflects off objects such as submarines, ships, or marine life.
The reflected sound, or echo, is then received by the sonar system's hydrophone, allowing it to analyze the data and provide information about the surrounding environment.
While active sonar is effective for detecting objects and underwater features, it can also produce loud noises that may have various effects on marine life.
The loud sound pulses can potentially disturb or harm marine animals, particularly marine mammals like whales and dolphins, which rely heavily on sound for communication and navigation. The use of active sonar has been a topic of environmental concern, and efforts are made to minimize its impact on marine ecosystems through regulations and responsible use.
Hence, The type of sonar that causes loud noises in the water is known as active sonar.
To know more about sonar here
https://brainly.com/question/29887779
#SPJ2
A molecule of water H2O and a molecule of methane CH4 have close to the same mass Which statement explains why water has much higher boiling point than methane?
A. There is hoydrogen bonding between water molecules?
B. There is ionic bonding between water molecules
C. There is hydrogen bonding between methane molecules
D. There is ionic bonding between methane molecules
Answer:
A. There is hydrogen bonding between water molecules
Explanation:
Boiling point is a physical property of matter. It is typically conditioned by the intermolecular forces present between the molecules of a compound.
The nature of the intermolecular forces between the molecules of water is very different from those of methane. Water molecules have hydrogen bonds within their molecules. These intermolecular bonds are very strong compared to the london dispersion forces in methane. Hydrogen bond forms when the hydrogen of one molecule binds with the oxygen of another molecule.Answer:
A)
Explanation:
There is hydrogen bonding between water molecules
Which of the following actions will induce an emf in a conductor?
a. Move a magnet near the conductor.
b. Move the conductor near a magnet.
c. Rotate the conductor in a magnetic field.
d. Change the magnetic field strength.
e. all of the above
Answer:
b . Move the conductor near a magnet
Answer:
(e) all the above....
Explanation:
That's all
Cause you know.......
A parachutist of mass 56.0 kg jumps out of a balloon at a height of 1400 m and lands on the ground with a speed of 5.10 m/s. How much energy was lost to air friction during this jump
Answer:
769,048.28Joules
Explanation:
A parachutist of mass 56.0 kg jumps out of a balloon at a height of 1400 m and lands on the ground with a speed of 5.10 m/s. How much energy was lost to air friction during this bump
The energy lost due to friction is expressed using the formula;
Energy lost = Potential Energy + Kinetic Energy
Energy lost = mgh + 1/2mv²
m is the mass
g is the acceleration due to gravity
h is the height
v is the speed
Substitute the given values into the formula;
Energy lost = 56(9.8)(1400) + 1/2(56)(5.10)²
Energy lost = 768,320 + 728.28
Energy lost = 769,048.28Joules
Hence the amount of energy that was lost to air friction during this jump is 769,048.28Joules
draw position time graph when speed is increasing
Explanation:
We need to draw position-time graph when the speed is increasing.
The slope of position-time graph gives the speed of an object.
Position means distance covered.
When the speed of an object is increasing with time. It means it is moving with increasing speed.
The attached figure shows the position -time graph when speed is increasing.
When is the object traveling at a constant velocity?
A
B
C
D
It is moving at a constant velocity the entire time
d
I think the most common way of doing it was for the first
It takes a crane 59s to lift a flagstone using 342 W of power. How much work is done on the flagstone?
Answer: The work done on the flagstone is 20178 J
Explanation:
Power is the rate at which work is done . It is equal to the amount of work done divided by the time it takes to do the work.
[tex]Work=Power\times time[/tex]
Given : work = ?
Power = 342 W = 342J/s
Time = 59 s
[tex]Work=342J/s\times 59s=20178J[/tex]
Thus the work done on the flagstone is 20178 J
If the velocity of an object changed from 30 m/s to 60 m/s over a period of 10 seconds what would the average acceleration be ?
here avarose566 you need this
Answer:
ooooooooooooooooo
Explanation:
*makes holy water*
a beaker weighs 0.4N when empty and1.4N when filled with water what does ot weigh when filled with brine of density 1.2 g/cm3
Answer:2.47
Explanation:
So, the beaker weighs 1.40N when filled with water, brine of density weighs about 1.7N, you add the density + water. Have a good day!