162.35 degree celcius is the new temperature of the gas in oc.
What is ideal gas law ?
The ideal gas law (also called the perfect gas law), the relationship between the pressure P, volume V, and temperature T of a gas in the boundary region between low pressure and high temperature. Gas molecules move almost independently. each other.
PV = nRT, where n is the number of moles of gas and R is the universal (or perfect) gas constant, 8.31446261815324 joules/kelvin/mol (the universal gas constant is defined as Avogadro's number NA multiplied by Boltzmann's constant k) . ) In the International System of Units, energy is measured in joules, volume in cubic meters (m3), force in newtons (N), and pressure in pascals (Pa). where 1 Pa = 1 N/m2. A force of 1 Newton moving a distance of 1 meter does 1 Joule of work. Therefore, the dimension of both products PV and nRT is work (energy).
Pressure is constant
V1T2 =V2T1
T2=V2T1/V1=162.35 degree C.
To know more about ideal gas law , click on the given link ;
https://brainly.com/question/21912477
#SPJ4
Why can you not selectively epoxidize an alkene with mcpba in the presence of a ketone?.
mCPBA is a useful reagent for epoxide formation and ketone-to-ester formation. It epoxidizes alkene to epoxide and also oxidizes ketone to ester. So we can't selectively epoxidize an alkene if both alkene and ketones are present.
Purified mCPBA is a useful reagent for the oxidation of various classes of aldehydes. α-branched aliphatic aldehydes undergo Baeyer-Villiger oxidation to form formates. α-branched α,β-unsaturated aldehydes yield enol formates and/or epoxides, and α-hydroxylated aldehydes yield ketones.
Most aldehydes and ketones have a low ceiling temperature below ambient temperature. That is, these compounds do not polymerize above room temperature. MCPBA is a strong oxidant comparable to other peracids. The advantage of 3-chloroperbenzoic acid is its handling.
Learn more about An alkene here:-https://brainly.com/question/13910028
#SPJ4
Describe the effect on the following. During your titration of Zinc Chloride lab, you discovered that the burette you used delivered less volume than the recorded volume of Zn2+ solution used in titration. Predict how your results would differ compared to the true values for:
a. Number of moles of zinc.
b. Number of moles of chloride.
c. Empirical formula.
The no. of moles and mass of zn determines to be in the titration sample of zinc chloride be less than the original value. correct option is (A).
Percentage error = (experimental value / theoretical value) * 100
So experimental value is always less than that of the theoretical value
b. Higher mole of Cl than the true value
A smaller volume would lead to a smaller mol amount of Cl being calculated. Thus higher than the true value volume recording.
c. The ratio of zinc to chloride would decrease.
A higher number of Cl moles would lead to higher whole number when divided by the number of Zn moles. Thus, the ratio would have a larger denominator equals smaller ratio.
To know more about titration click here:
https://brainly.com/question/27107265
#SPJ4
Please help me I dont understand this at all
The element camerium has two isotopes camerium-111 and camerium-113. calculate the percent of each isotope if the average isotopic mass is 112.67 amu. Heres what the table looks like
Considering the definition of isotopes and atomic mass of an element, the percent of each isotope is 16.5% abundant for Camerium-111 and 83.5% abundant for Camerium-113.
Definition of isotopeThe same chemical element can be made up of different atoms, where their atomic numbers are the same, but the number of neutrons is different. Thus the isotopes of the element are formed.
Definition of atomic massThe atomic mass of an element is the weighted average mass of its natural isotopes. This is, the atomic mass of a chemical element is usually calculated as the weighted average of the masses of the different isotopes of each element, considering the relative abundance of each of them.
Atomic mass of the element in this caseIn this case, you know:
Camerium-111 is x% abundant (the atomic mass is 111).Camerium-113 is (100-x)% abundant (the atomic mass is 113).The average isotopic mass is 112.67 amu.Then, the average mass can be expressed as:
111x + 113×(1-x)= 112.67
Solving:
111x + 113×1 -113x= 112.67
111x + 113 -113x= 112.67
111x -113x= 112.67 -113
(-2)x= (-0.33)
x= (-0.33)÷(-2)
x=0.165= 16.5%
Finally, the percent of each isotope is:
Camerium-111 is 16.5% abundant.Camerium-113 is 83.5% abundant.Learn more about average atomic mass:
brainly.com/question/4923781
brainly.com/question/1826476
brainly.com/question/15230683
brainly.com/question/7955048
#SPJ1
Rebecca made a mixture of raisins, nuts, and dried fruit for a snack. Which kind of mixture was rebecca’s snack?.
Rebecca made a mixture of raisins, nuts, and dried fruit for a snack then kind of mixture was rebecca’s snack is heterogenous mixture
A mixture is composed of one or more pure substances in varying composition and a pure substances or a homogenous mixture consist of a single phase and a heterogenous mixture consist of two or more phases and when oil and water are combined and they do not mix evenly and but instead form two separate layer and each of the layer is called a phase and here is a mixture of raisins, nuts, and dried fruit that's why it is different fruits are seen so it is the heterogenous mixture
Know more about mixture
https://brainly.com/question/11665608
#SPJ4
All about Chemical kinetics
Answer:
CHEMICAL KINETICS can also be called as REACTION KINETICS.
CHEMICAL KINETICS is one of the branches of physical chemistry.
Explanation:
CHEMICAL KINETICS describes the speed of chemical species where they transform in new substances by breaking down. After breaking down they form molecular bonds.
Study of a chemical reaction can be stated as CHEMICAL KINETICS.
CHEMICAL KINETICS can be used in real life.
To know more about CHEMICAL KINETICS
Test yourself
Using Tables 2.1 and 2.2, pick the 'odd one out' in
the following group and explain why it is different
from the others.
zinc
copper
oxygen
lead
2 Using Tables 2.1 and 2.2, pick the 'odd one out' in
the following group and explain why it is different
from the others.
carbon
nitrogen
iron
sulfur
Jsing Tables 2.1 and 2.2, pick the 'odd one out' in
the following group of properties of metals and
explain why it is different from the others.
Zinc
copper
Oxygen
Lead
high melting point
high density
soft or brittle
good electrical conductivity
The separation compound using diffrence in boiling point melting point like physical properties.
What is physical properties?
A physical property is the any measurable property that whose value describes the state of a physical in system. Changes in the system's physical properties of can be used to describe its transitions between the momentary of state.
A physical property is a characteristic of the matter that is not associated with in a change in its chemicals composition. Familiar to the examples of physical properties that is include density, color, hardness, melting and boiling points, and the electrical conductivity.
There are mainly two types of physical property extensive and intensive.
Sol-The separation scheme to used to separate the mixture of based on differences in this physical properties- such as boiling point, melting point, solubility in a given solvent these are the three components.
To know more about physical properties click-
https://brainly.com/question/26549181
#SPJ1
Please help me with this chemistry problem
Answer:
below
Explanation:
Zn mole wt =65.38 145 / 65.38 =2.2 moles
S mole wt = 32 36/32 = 1.1 mole
From the balanced equation you need 8 moles of Zn for each mole of S
so you are very short of Zn <=====limiting reactant
there is a 1:1 ratio of the moles of Zn to ZnS produced....so you will get 2.2 moles of ZnS (but you will only use .275 mole of the sulfur)
zinc tetraoxosulphate (vi) solution was electrolysed in such a way that 0.5ampere flowed for 32minutes 10 was seconds deposing 0.325g of zinc at the cathode calculate: the number of moles of zinc deposited : the number of coulomb of electricity required to deposit 1mole of zinc: the charge on a zinc ion (1f=96500c,zn=65
Answer:
zinc tetraoxosulphate (vi) solution was electrolysed in such a way that 0.5ampere flowed for 32minutes 10 was seconds deposing 0.325g of zinc at the cathode calculate:
on zoo_m
code :7201934829
pass : 1234
the number of moles of zinc deposited : the number of coulomb of electricity required to deposit 1mole of zinc: the charge on a zinc ion (1f=96500c,zn=65
A solution was found to have a 15. 6 % transmittance at 500 nm, its wavelength of maximum absorption, using a cell with a path length of 5. 00 cm. Calculate the absorbance of the solution in a 1. 00 cm cell at 500 nm.
Absorbance of the solution in a 1. 00 cm cell at 500 nm is 0.161
Absorption measure the amount of light of a particular wavelength that a particular substances block from passing and the two main factor that affect absorption are substances concentration and optical path length and the net absorption rate is calculated using the formula of the total vacant area at the beginning of the period plus square feet
Here given data is
Percentage transmittance of the sample = 15.6 %
Therefore absorbance 2 - log (%T) = 2 - log(15.6) = 0.8069
Then use beer's law :
A = ε×c×l
Where ε = molar absorptivity of the solution
c = concentration of the solution
l = path length of the solution
Then A = 0.8069 and l = 5.00 cm
0.8069 = ε×c×(5.00cm)
ε×c = 0.16138cm⁻¹
For the next part then assume that ε×c remain constant and we have
A' = ε×c×l where l = 1.00cm
Then put the values
A' = (0.16138cm⁻¹)×(1.00cm) = 0.16138
Know more about transmittance
https://brainly.com/question/29413616
#SPJ4
Combusting an unknown hydrocarbon produces 5 mol co₂ and 6 mol h₂o. What is the empirical formula of the hydrocarbon?.
The empirical formula of the given hydrocarbon is CH2 .
What is a combustion reaction?
A fuel (the reductant) and an oxidant, typically atmospheric oxygen, undergo a high-temperature exothermic redox chemical reaction that results in oxidized, frequently gaseous products and a mixture known as smoke. Since a flame only appears when substances undergoing combustion evaporate, combustion does not always result in fire, but when it does, a flame is a distinctive sign of the event. The heat from a flame may be enough energy to make the reaction self-sustaining, even though the activation energy must be overcome to initiate combustion (such as when using a lit match to start a fire).
A convoluted series of simple radical reactions frequently occurs during combustion.
The given reaction is ,
CH2(g)+3O2(g)→2CO2(g)+2H2O(I)
Hence, the empirical formula of the given hydrocarbon is CH2 .
To know more about combustion reaction from the given link
https://brainly.com/question/13251946
#SPJ4
During a lab, a tablet i dropped into a bag and liquid i added. The ma of the tablet wa 20 g, the ma of the bag wa 50 g, the ma of the liquid wa 90 g. When the tablet hit the water, a chemical reaction took place and the bag filled with ga. If the ma of the liquid remained at 90 g, how much ga wa produced?
Response: 25 g. According to the law of conservation of mass, mass is maintained throughout a chemical process.
What instances from chemistry?The elements, including such zinc, helium, or oxygen, as well as compounds comprised of components like water, carbon dioxide, or salt, as well as more complicated materials, such as your computer, the air you breathe, rainfall, a chicken, a car, etc., are examples of chemicals.
Why do chemicals form?Chemical processes occur when atoms form or break chemical bonds. The molecules that start a chemical reaction are known as reactants, and the molecules that are produced as the result of the process are known as products.
To know more about Chemicals visit:
https://brainly.com/question/13145357
#SPJ4
According to the beer-lambert law, what happens to the absorbance value of a light-absorbing chemical when its concentration increases?.
The absorbance is directly proportional to the concentration (c) of the solution of the sample used in the experiment.
What is beer-lambert law ?
The Beer-Lambert law is commonly used to measure sample absorbance and transmittance and can be used to determine sample concentration. In absorbance measurements, light passes through a cuvette filled with sample. Compare the light intensity after passing through the cuvette to the light before passing through the cuvette. The cuvette size determines the optical path length (L). (A cuvette is a special glass device.) The wider the cuvette, the more light of the sample is transmitted, and the less light is transmitted. This explains why the formula depends on the path length (L).
To know more about beer-lambert law , click the given link ;
https://brainly.com/question/29385680
#SPJ4
A boat that was sailing at 420 meters per minute passed near a humpback whale. The whale had taken 2.5 minutes to swim 230 meters south at a constant velocity. What was the whale's velocity?
PLSS help!!!
The velocity of the whale is equal to 1.53 m/s.
What is the velocity?Velocity can be defined as a vector measurement of the direction and position of an object. The velocity can be defined as the rate of change in the position w.r.t. time.
Velocity is a vector parameter as it possesses both magnitude and direction. A mathematical formula to determine velocity:
v = d / t
Where v is the velocity, d is the distance, and t is the time of an object.
The S.I. unit for velocity is meters per second (m/s) and can also express in miles/hour (mph), and kilometers/hour (kph).
Given the distance swum by the whale, d= 230 m
The time is taken by the whale, t = 2.5 min = 150 sec
The velocity of the whale = d/t = 230/150 = 1.53 m/s
Learn more about velocity, here:
brainly.com/question/19979064
#SPJ1
1. A 3. 88 mol sample of gas has a temperature of 28°c and a pressure of 885 torr. What is its volume?.
A 3. 88 mol sample of gas has a temperature of 28 °C and a pressure of 885 torr. its volume is 82.5 L.
Given that :
mole = 3.88 mol
temperature = 28 °C = 301 K
pressure = 885 torr = 1.16 atm
volume = ?
using the ideal gas equation , we get
P V = n R T
V = ( n RT) / P
V = (3.88 × 0.082 × 301 ) / 1.16
V = 82.5 L
Thus, A 3. 88 mol sample of gas has a temperature of 28 °C and a pressure of 885 torr. its volume is 82.5 L.
To learn more about ideal gas equation here
https://brainly.com/question/28837405
#SPJ4
what was significant about the atomic theory that democritus proposed?
He proposed that matter, when small enough, reaches a point where it can no longer be divided and becomes atoms, meaning "individual".
Democritus believed that atoms were uniform, solid, hard, incompressible, and indestructible, and that they moved in infinite numbers through empty space until they stopped. In the philosophy of Democritus, atoms existed not only for matter, but also for such properties as perception and the human soul.
Democritus developed his atomic philosophy as a middle ground between the two opposing Greek theories of reality and the illusion of change. He argued that matter is divided into indivisible and immutable particles that create the appearance of change when they combine and separate from each other.
To know about atoms click here:
https://brainly.com/question/1566330
#SPJ4
classify the following as an electrolyte or non-electrolyte: calcium chloride solution (an ionic compound)
Calcium chloride solution is a electrolyte solution.
An electrolyte solution is a solution that generally contains ions, atoms or molecules that have been lost or gained electrons during the reaction, and is electrically conductive. Because of this they are often called ionic solutions, however there are some cases where the electrolytes are not ions.
A non-electrolyte is a solute that does not dissociate, or which does not furnishes ions during the dissolving process. Therefore, solutions that are generated through the solvation of non-electrolytes do not contain ions and, instead they are called as neutral molecules.
In case of calcium chloride it is a electrolyte solution because when it dissociates it generated Ca2+ and Cl- ions, which gives a ionic solution. Hence it is a electrolyte.
To know more about electrolyte
https://brainly.com/question/29333466
#SPJ4
A saturated solution of lead (ii) nitrate was made at 500c using 100g of water and then allowed to cool to 300c. What would happen to the solution as the temperature is decreased?.
The temperature of the solution decreases with the precipitation of solid lead nitrate in the solution.
Therefore, when a saturated solution of lead nitrate prepared at 50°C is cooled to 30°C solid lead nitrate is observed to segregate into the solution. This means that as the temperature decreases, so does the solubility of lead nitrate. The solubility of substances is directly affected by the temperature of the solvent.
The average kinetic energy of the molecules that make up the solution increases as the temperature of the solution increases. The increased kinetic energy allows solvent molecules to break down solute molecules bound by intermolecular interactions. A dissolution process is endothermic if the energy released when a water molecule bonds with a solute are less than the energy used to pull the solute apart.
Learn more about A saturated solution here:-https://brainly.com/question/4529762
#SPJ4
Predict how oxygen saturation would be affected if an individual has defective hexokinase enzymes. a. 2,3-BPG levels are elevated and o b. 1,3-BPG levels are reduced and c. 2,3-BPG levels are elevated and oxy d. 2,3-BPG levels are reduced and oxygen binding ou e 2,3-BPG levels are reduced and oxygen binding increase levels are elevated and oxygen binding decreases to levels are reduced and oxygen binding increases. PG levels are elevated and oxygen binding increases. and oxygen binding decreases
Oxygen saturation would be affected if an individual has defective hexokinase enzymes is 2,3 - BPG levels are reduced and oxygen binding increases.
Oxygen saturation can be defined as the measure of amount of hemoglobin bound with the oxygen and comparted to the amount of hemoglobin unbounded to the oxygen atom. 2,3 BPG allows the hemoglobin to increase the amount of oxygen. 2,3 bpg is 2.3 Bi phospho glycerate. it increases the supply of oxygen to the tissues by hemoglobin binding.
Thus, Oxygen saturation would be affected if an individual has defective hexokinase enzymes is 2,3 - BPG levels are reduced and oxygen binding increases.
To learn more about oxygen saturation here
https://brainly.com/question/28026966
#SPJ4
In the complete activity series, cobalt is below zinc but above tin. Suppose that you wanted to removecobalt ions from a solution. Would you add a strip of tin or zinc to the solution? Explain your answer. Plsssss help meeeeee
To solve such this we must know the concept of displacement reaction. To remove cobalt ions from a solution, we need strip of zinc as zinc is on top of activity series.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, displacement reaction.
In displacement reaction one metal displace the other metal from its compound. The activity series is Zinc >Cobalt>tin. To remove cobalt from a solution, we need a metal which is more reactive than cobalt, which is zinc.
Therefore, to remove cobalt ions from a solution, we need strip of zinc.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ1
name the 3 types of nitrogenous wastes, identify which has the highest and which has the lowest nitrogen content and if energy is needed to produce it. underline the one associated to fish.
The three types of nitrogenous wastes are urea, ammonia and uric acid. ammonia is high toxic nitrogen waste and uric acid is least toxic nitrogen waste.
What are nitrogenous wastes?
Nitrogenous wastes are those substances which are produced during protein metabolism process.
Proteins are nitrogen containing substances and when metabolism process occurs the extra amount of nitrogen is released from the body in the form of waste.
In animals all these nitrogenous wastes are discharged from the body in different forms.
However, the most common way of discharging these waste products is feces and urine.
Moreover, the nitrogenous waste associated wit fish is ammonia.
If you need to learn more about nitrogenous wastes click here:
https://brainly.com/question/28302805
#SPJ4
If oxygen gas were collected over water at 22oC and the total pressure of the wet gas were 710 mm-Hg, what would be the partial pressure of the oxygen in mm-Hg? (Do not include the unit in the response)
Hint: Vapor Pressure of Water calculator Formula:
P = 10A-B/(C+T)
Where:
P: Vapor Pressure of Water in mm-Hg
T: Water Temperature, in Celsius
A,B,C: Antoine Constants for Water. When water temperature in the range of 1 - 100 Celsius A=8.07131, B=1730.63, C= 233.426
The partial pressure of the oxygen gas is obtained as 690.65 mmHg.
What is partial pressure?The term partial pressure has to do with pressure of a gas that is part of a mixture of gases. We know that the total pressure of a mixture of gases is the sum of the partial pressures of all the gases that we have in the mixture.
We know that we can be able to apply the Dalton's law of partial pressures in this case. From the Dalton's law of partial pressure we have that;
PT = PA + PB + PC + ...... These are the individual pressures of the gases.
Now we know that saturated vapor pressure of water at the temperature of 22°C is 19.35 mmHg.
We can now be able to obtain the pressure of the gas from the values that we have and this is; 710 mm-Hg - 19.35 mmHg = 690.65 mmHg
Learn more about vapor pressure:https://brainly.com/question/11864750
#SPJ1
If the volume of the gas is increased to 5.30 L, what is the pressure?
(Assume constant temperature.)
Express your answer in millimeters of mercury to three significant
figures.
The final pressure can be calculated using Boyle's law. The final pressure of the gas if the volume is increased from 3.98 L to 5.30 L is obtained as 526.4 mmHg.
What is Boyle's law?Boyle's law states that at constant temperature, the volume of a gas is inversely proportional to the pressure of the gas. Hence, volume decreases with increase in pressure and vice versa.
If P₁ and V₁ be the initial pressure and volume respectively and P₂, V₂ be their final quantities, then the relation between them can be written as:
P₁ V₁ = P₂ V₂ .
It is given that the initial volume and pressure is 3.98 L and 701 mmHg, and the final volume is 5.30 L. Then, the final pressure is calculated as follows:
P₂ = P₁ V₁ / V₂
= (3.98 L × 701 mm Hg) / 5.30 L
= 526.4 mmHg.
Hence, the final pressure of the gas will be 526.4 mmHg.
To find more on Boyle's law, refer here:
https://brainly.com/question/1437490
#SPJ1
Your question is incomplete, but your complete question probably was:
A sample of gas has an initial volume of 3.98 L at a pressure of 701 mmHg If the volume of the gas is increased to 5.30 L, what is the pressure? (Assume constant temperature.)
a chemistry student prepared lead(ii) iodide from 10.0 g of lead(ii) nitrate and aqueous potassium iodide. part a if the student collected 12.6 g of pbi2 and the theoretical yield is 13.9 g , what is the percent yield?
The percent yield of lead (II) iodide is 90.6 %.
A insoluble lead (II) iodide salt is produced as this is a precipitation reaction.
The balanced chemical equation for this reaction is given as:
Pb(NO₃)₂ (aq) + 2 KI (aq) → PbI₂ (s) + 2 KNO₃ (aq)
Moles of Pb(NO₃)₂ in the reactant side = 10 × 1/331.2 g = 0.0302 mol
Lead (II) nitrate is the limiting reagent as KI is in excess.
Theoretical yield of PbI₂ = 0.0302 mol × 461.01 g/ 1 mol
= 13.9 g
Actual yield of PbI₂ = 12.6 g
Percent yield of PbI₂ in product side = 12.6 g/13.9 g × 100%
= 90.6%
Hence, the percent yield of lead (II) iodide is 90.6 %.
Learn more about percent yield from the link given below.
https://brainly.com/question/20106205
#SPJ4
Identify the elements that undergo changes in oxidation number in the reaction nai(aq)+3hocl(aq)→naio3(aq)+3hcl(aq).
The following changes in oxidation number in the reaction.
NaI (aq) + 3HOCl (aq) → NaIO₃ (aq) + 3HCl (aq)
The iodine elements is going under oxidation in the given reaction that is from -1 to +5.
A loss of negatively charged electrons corresponds to an increase in oxidation number, while a gain of electrons corresponds to a decrease in oxidation number.
Therefore, the element or ion that is oxidized undergoes an increase in oxidation number.
Learn more about oxidation number here:- https://brainly.com/question/2515738
#SPJ4
what is a property of every mixture
The property of every mixture is right response is D)One substance can be separated from another through physical means.
A mixture is a combination of two or more substances that are physically merged or mingled without losing their own identities.This indicates that the combination does not alter chemically and can be physically separated (like filtration). It may contain molecules that are solid, liquid, or gaseous.Homogeneous mixtures (having a consistent composition, so that every sample will have the same attribute) and heterogeneous mixtures are the two main categories of mixtures ( non uniform composition that is not every sample will have same property).As a result, D) is a characteristic of every blend.To learn more about mixture visit:
brainly.com/question/24898889
#SPJ1
Given: 27.375 g HNO₃ and 47.0 g Sr(OH)₂ and total volume of 1.2 L
Reaction: 2HNO₃ (aq) + Sr(OH)₂ (aq) ⇒ Sr(NO₃)₂ (aq) + 2HOH (l)
Net ionic equation: 2H⁺ (aq) + 2OH⁻ (aq) ⇒ 2HOH (l)
Find the final concentration of OH⁻ ions.
The final concentration of the hydroxide ions is 0.163 M.
What is the final concentration of OH⁻ ions?We have to obtain the number of moles of each of the reactants. This would help us to be able to obtain the final concentration of the hydroxide ions.
Number of moles of the acid = 27.375 g/63 g/mol
= 0.43 moles
Number of moles of strontium hydroxide = 47.0 g/122 g/mol
= 0.39 moles
It is clear that the hydroxide is the limiting reactant
Number of moles of the hydroxide ion = 0.39 moles/2 = 0.195 moles
Volume of the solution = 1.2 L
Concentration of the solution = Number of moles/ volume
= 0.195 moles/ 1.2 L
= 0.163 M
Learn more about concentration:https://brainly.com/question/27549176
#SPJ1
c) You pour a purple potassium permanganate solution (KMnO4) with a concentration of
2 mol/L in different volumetric flasks-100 mL/ 250mL/ 500ml - please calculate the
moles involved of each flask.
Answer:
Explanation:.
an automobile gasoline tank holds 43.0 kg of gasoline. when all of the gasoline burns, 153.0 kg of oxygen is consumed, and carbon dioxide and water are produced?
The total combined mass of carbon dioxide and water that is produced is 196kg.
Mass is the quantity of matter in a physical body. It is also a measure of the body's inertia, the resistance to acceleration when a net force is applied. An object's mass also determines the strength of its gravitational attraction to other bodies. The SI base unit of mass is the kilogram.
How to calculate the total combined mass of carbon dioxide and water that is produced?
The reaction is written as follows :
Gasoline + 0₂ → CO₂ + H₂O
According to the law of conservation of mass, the total mass of reactants must be equal to the total mass of products as during a reaction, the overall mass of the system remains constant.
So the total mass of reactants is 43kg + 153kg = 196kg
Since mass reactants is equal to the combined mass of products, therefore, combined mass of carbon dioxide and water produced is 196kg.
Learn more about mass https://brainly.com/question/15959704
#SPJ4
In 1-2 sentences, WHY do we use density to identify unknown substances?
It enables us to determine which materials will float and which materials will sink when dissolved in a liquid. Density equals mass/volume and does not depend on shape or size, which allows it to be useful in identifying unknown substances.
Hope this helped!
c. units of volume to units of
length.
d. units of length to units of
volume.
13.A student determined the density of
aluminum by averaging the
results of three density
calculations. Each value was
different, but the average was
equal to the accepted value for
aluminum's density. The results
of this investigation are best
described as
a. accurate, but not precise.
b. precise, but not accurate.
c. both precise and accurate.
d. neither precise nor accurate.
14. Neutral atoms contain equal numbers
of
a. electrons and neutrons.
b. protons and neutrons.
c. protons and electrons.
d. protons, electrons, and
neutrons.
15. An atom of potassium has 19 protons
and 20 neutrons. Its mass
number is
a. 9.
b. 19.
c. 20.
d. 39.
16. The isotope uranium-235 has 92
protons and 143 neutrons.
Therefore, its mass number
a. 92.
b. 235.
c. 143.
d. impossible to determine.
13.A student determined the density of aluminum by taking average of the results of three density calculations. Each value was different, but average was equal to the accepted value for density of aluminum. The results of investigation are described as a.) accurate, but not precise.
What is mass number?
The total number of protons and neutrons in an atom is known as the mass number. It is calculated by adding the number of neutrons and the number of protons together .
14.Neutral atoms contain equal numbers of c.) protons and electrons.
15. An atom of potassium has 19 protons and 20 neutrons. Its mass number is d.) 39. As we know that, mass number = Number of protons + number of neutrons. Hence, 19 + 20 = 39
16.The isotope uranium-235 has 92 protons and 143 neutrons. Therefore, its mass number b.) 235.
To know more about mass number, refer
https://brainly.com/question/28409714
#SPJ1