The first case has N-N single bond has the second case has N-N double bond.
What is bond energy?The term bond energy is referred to as the energy that is released when a bond is formed it is equal to the energy that is required to break the bond.
In the first case, the N-N bond has an energy of about 209 kJ/mol indicating that it must be a single bond. The second case has a bond energy of 418 kJ/mol indicating that it is an N-N double bond.
Learn more about bond energy: https://brainly.com/question/26141360
Answer:
Explanation:
The difference in bond energies of N–N bonds in different compounds could be due to the presence of different chemical groups around the nitrogen atoms. These chemical groups can influence the bond strength between the nitrogen atoms, causing the bond energy to vary. Additionally, different bonding arrangements, such as single or double bonds, could also contribute to the difference in bond energy.
What is the concentration of the following:
2.0mol of zinc sulphate in 10 dm^3 of solution
Answer:
Concentration is measured in moles per cubic decimetre: mol dm–3. To find the concentration of a solution, divide the number of moles by the volume in dm3. If the volume is in cm3, divide the volume by 1000 first to convert it into dm3.
Explanation:
An inhibitor is added to an enzyme-catalyzed reaction at a concentration of 26.7 μM. The Vmax remains constant at 50.0 μM/s, but the KM increases by 150%. Calculate the Ki for this inhibitor.
Using the Michaelis-Menten equation competitive inhibition, the Inhibition constant, Ki of the inhibitor is 53.4 μM.
What is the Ki for the inhibitor?The Ki of an inhibitor is known as the inhibition constant.
The inhibition is a competitive inhibition as the Vmax is unchanged but Km changes.
Using the Michaelis-Menten equation for inhibition:
Kma = Km/(1 + [I]/Ki)Making Ki subject of the formula:
Ki = [I]/{(Kma/Km) - 1}where:
Kma is the apparent Km due to inhibitor Km is the Km of the enzyme-catalyzed reaction[I] is the concentration of the inhibitorSolving for Ki:
where
[I] = 26.7 μM
Km = 1.0
Kma = (150% × 1 ) + 1 = 2.5
Ki = 26.7 μM/{(2.5/1) - 1)
Ki = 53.4 μM
Therefore, the Inhibition constant, Ki of the inhibitor is 53.4 μM.
Learn more about enzyme inhibition at: https://brainly.com/question/13618533
A compound is made up of 168.2 g Cd, 35.96 g C, 4.53 g H, and 47.91 g O. What is the empirical formula of this compound
Considering the definition of empirical formula, the empirical formula is Cd₁C₂H₃O₂= CdC₂H₃O₂.
Definition of empirical formulaThe empirical formula is the simplest expression to represent a chemical compound, which indicates the elements that are present and the minimum proportion in whole numbers that exist between its atoms, that is, the subscripts of chemical formulas are reduced to the most integers. small as possible.
Empirical formula of the compoundYou know that a compound is made up of 168.2 g Cd, 35.96 g C, 4.53 g H, and 47.91 g O.
Then it is possible to calculate the number of moles of each atom in the molecule, taking into account the corresponding molar mass:
Cd: [tex]\frac{168.2 g}{112.4 \frac{g}{mole} } =[/tex] 1.496 moles
C: [tex]\frac{35.96 g}{12 \frac{g}{mole} } =[/tex] 2.997 moles
H: [tex]\frac{4.53 g}{1 \frac{g}{mole} } =[/tex] 4.53 moles
O: [tex]\frac{47.91 g}{16 \frac{g}{mole} } =[/tex] 2.994 moles
The empirical formula must be expressed using whole number relationships, for this the numbers of moles are divided by the smallest result of those obtained. In this case:
Cd: [tex]\frac{1.496 moles}{1.496 moles } =[/tex] 1
C: [tex]\frac{2.997 moles}{1.496 moles } =[/tex] 2
H: [tex]\frac{4.53 moles}{1.496 moles } =[/tex] 3.02≅ 3
O: [tex]\frac{2.994 moles}{1.496 moles } =[/tex] 2
Therefore the Cd: C: H: O mole ratio is 1: 2: 3: 2.
Finally, the empirical formula is Cd₁C₂H₃O₂= CdC₂H₃O₂.
Learn more about empirical formula:
brainly.com/question/5115389?referrer=searchResults
brainly.com/question/4594902?referrer=searchResults
brainly.com/question/13725914?referrer=searchResults
brainly.com/question/13112542?referrer=searchResults
Process by which plants, algae, and many types of bacteria use sunlight, water, and carbon dioxide to make food and oxygen
Answer: Photosynthesis
Explanation:
The process of photosynthesis is used to help make food for plants. The inputs are sunlight, water (H2O), and carbon dioxide (CO2). Then the outputs are glucose (C6H12O6) which is food, and oxygen (O2) is released.
I hope this helps :)
1. Compare masses: a) 0,4mol CO₂ and 0,6mol H₂O ; b) 0,135mol H₂SO₄ and 0,5mol HCI.
2. Where is the highest number of molecules? a) 0,1mol H₂O or 0,3mol CO₂ ; b) 0,25mol HCI, 3,4g H₂S or 5ml acetic acid CH₃COOH. (ρ=1,049g/ml).
Answer:
you can now deduct which one is greater or smaller and by how much.
Explanation:
no of moles= mass/molar mass
1ai) 0.4 = m/ ( 12 + (16*2)
m= 0.4* 44
m= 17.6g
ii) 0.6= m/( 2*1 + 16)
m= 0.6 *18
m= 10.8g
b) 0.135 = m/ ( 2*1 +32 + (16*4)
m= 0.135* 98
m= 13.23g
ii) 0.5= m/ (1+35.5)
m= 0.5*36.5
m= 18.25g
2. Avogadro's Number = 6.02×10²³
1 mol of any element= 6.02×10²³ particles
a) 0.1 mol of H20= (6.02×10²³) * 0.1
= 6.02×10²² molecules
ii) 0.3 mol of CO2= (6.02×10²³) * 0.3
= 1.806 × 10²³ molecules
Ans: 0.3 mol of CO2
bi) 0.25 mol of HCl= (6.02×10²³) * 0.25
= 1.505 × 10²³ molecules
bii) - find the no of moles first:
no of moles= mass/molar mass
n= 3.4g/ 34g →mr of H2S in g=2+32= 34g
n= 0.l mol
- use the Avogadro Number.
0.1 mol of H20= (6.02×10²³) * 0.1
= 6.02×10²² molecules.
biii) here you're given the density, use it to find the mass of acetic acid.
ρ = 1049 g/ml
ρ = m/v, where v=5 ml
1049 = m/ 5
m= ρ*v
m= 1049*5
m= 5245 g
• convert this into moles.
mr of CH3COOH= 12 + 3+ 12+ 16+ 16+ 1
= 60
mr in g = 60g
n= m/mr
n= 5245/ 60
n= 87. 41666...
n= 87.4 moles
•using Avogadro's Number:
87.4 moles of acetic acid=(6.02×10²³)*87.4
= 2.25148* 10²⁵
= 2.25 * 10²⁵ molecules
thus, the ans for this is 5 ml of acetic acid.
June 1
June 8
June 11
5. What phase of the moon most likely will appear 28 days after phase C?
A Waning Gibbous
June 15
B
Waning Crescent
с
Waxing Crescent
D
Waxing Gibbous
Answer:
D
Explanation:
it's D because it goes waxing crescent to waxing gibbous
What is the empirical formula for CH2OHCH2OH?
How many atoms are in 1mg of NaCl
The number of atoms in 1 mg of NaCl = 1 × 10^19 atoms
Calculation of quantity of atomsAtomic mass of Na = 23
Atomic mass of Cl = 35.5
Therefore the molar mass of NaCl = 23 + 35.5 = 58.5g/mol
But 1 mg = 0.001g and 1 mol = 6.022 × 10^ 23
Therefore, If = 58.5g = 6.022 × 10^ 23 atoms
0.001g =X atoms
X atoms = 6.022 × 10^23 × 0.001/58.5
= 0.1 × 10^23 × 10^-³
= 1 × 10^19 atoms
Therefore, the number of atoms in 1 mg of NaCl =1 × 10^19 atoms.
Learn more about atoms here:
https://brainly.com/question/6258301
use the periodic table to answer this question, state whether the element named in (a)is a metal or nonmetal
Answer:
METALExplanation:
Element Name - Actinium
Symbol - AC
Electronegativity - 1.1
It is a Rare Silvery- white metal that's highly radio active
Use the reactivity series to name two metals that are more reactive than magnesium, and three metals that are less reactive.
Answer:
More reactive - Sodium and potassium
Less reactive - Aluminum, Manganese and Zinc
Answer:
Two more reactive metals= K and Na Three less reactive metals = Al , Zn and FeExplanation:
Here we need to state two metals that are more reactive than Magnesium and three metals which are less reactive than Magnesium using the Reactivity series .
The Reactivity series goes like ,
K > Na > Ca > Mg > Al > Zn > Fe > Ni > Sb > Pb > H > Cu > Hg > Ag > Au > Pt
So from this we see that , Pottasium (K) , Sodium (Na) and Calcium (Ca) are more reactive than Magnesium and Aluminium (Al) , Zinc (Zn) and Iron (Fe) are less reactive than Magnesium .
So that ,
→ Two more reactive metals= K and Na
→ Three less reactive metals = Al , Zn and Fe
I hope this helps .
Which option describes a wavelength of light?
A. a distance between two similar points on a wave of light
B. an object that makes light bend or bounce
C. a type of visible light
D. a heated atom that forms light
Answer:
Its A
Explanation:
It you look at a wavelength chart, it would show you the rate at which the light travels, from its distance. Which means there has to be two points to calculate it.
What happens to the pitch of a sound if the frequency is high?
A student wants to test how plants grow in different
colors of light. Thinking about this experiment, what
are some of examples of each of the following? List at
least two in each.
DATA
VARIABLES
CONTROLS
Answer:
What is the question? I don't see it.
What is the mechanism of a chemical reaction? How can a study of reaction rates be used to elucidate
the mechanism of a chemical reaction?
The mechanism of chemical reaction is the series of steps
by which chemical reaction follows to for a new substances.
Mechanism of chemical reactionFor a new substance to evolve from a chemical reaction, there are some steps that needs to be taken. These steps include:
Bonds between atoms in the reactants must be broken,The atoms or pieces of molecules are reassembled into products by forming new bonds. Energy is absorbed to break bonds, and Energy is evolved as bonds are made.The study of reaction rate, which is the change in concentration of a reactant or product with time, helps to explain further the mechanism of chemical reaction.
Learn more about chemical reaction here:
https://brainly.com/question/26018275
3. Calculate the mass of
(6) 0.5 mole of magnesium atoms.
(a) 3 moles of chlorine molecules.
Hope you could understand.
If you have any query, feel free to ask.
Which is a derived unit?
Answer:
derived unit. noun. a unit of measurement obtained by multiplication or division of the base units of a system without the introduction of numerical factors.
Explanation:
Water (2470 g ) is heated until it just begins to boil. If the water absorbs 5.47x105 J of heat in the process,
what was the initial temperature of the water?
Express your answer with the appropriate units.
Answer:
47.01 °C
Explanation:
Q = mcΔt
Mass of water = 2470g
c or specific heat capacity of water = 4.18 J °C g
Q = 5.47 x 10⁵ J, which is expanded 547,000 J
No idea what Δt is, but we do know the water began to boil, and we know that water's boiling point is 100°C, so the final temperature had to be 100°C.
547,000 J = (2470) x (4.18) x (Δt)
Rearrange equation for Δt
(547,000) / (2470 x 4.18) = Δt
Δt = 52.98°C
But we're not done. We're trying to find the INITIAL TEMPERATURE of the water, not the TEMPERATURE CHANGE. We already have the final temperature, which is 100°C, and now we have how much the initial temperature rose by to get to 100°C.
All that we have to do now is 100 - 52.98 = 47.02°C
The initial temperature of the water is 47.02°C
Describe the Principle of Continuity of State
If any liquid is flowing in a pipe of cross-section area, then rate of flow of liquid across any cross-section remains constant.
Principle of Continuity of StateAccording to the equation of continuity states that if any liquid is flowing in streamline flow in a pipe of non-uniform cross-section area, then rate of flow of liquid across any cross-section remains constant. In the Principle of Continuity of State, Av = constant.
Where A refers to cross-sectional area and v is the velocity in which the fluid flows. It means
Learn more about continuity here: https://brainly.com/question/24637240
The vapor pressure of pure acetone (C3H6O) is 216 torr
The vapor pressure of pure chloroform (CHCl3) is 157 torr.
What is the mole fraction of acetone (C3H6O) in the vapor phase resulting from a solution of 0.100 mol acetone and 0.200 mol chloroform (CHCl3) in the liquid phase?
The mole fraction of acetone (C₃H₆O) is 0.333
Data obtained from the question Mole of C₃H₆O = 0.1 moleMole of CHCl₃ = 0.2 mole Mole fraction of C₃H₆O =? How to determine the mole fractionMole fraction of a substance can be obtained by using the following formula:
Mole fraction = mole / total mole
With the above formula, we can obtain the mole fraction of C₃H₆O as follow:
Mole of C₃H₆O = 0.1 moleMole of CHCl₃ = 0.2 mole Total mole = 0.1 + 0.2 = 0.3 moleMole fraction of C₃H₆O =?Mole fraction = mole / total mole
Mole fraction of C₃H₆O = 0.1 / 0.3
Mole fraction of C₃H₆O = 0.333
Learn more about mole fraction:
https://brainly.com/question/2769009
Someone can help me please??
Calculate the value of K at 700 K for the
reaction
H2(g) + I2(g) → 2 HI(g)
if Kc = 54 at the same temperature.
Answer:
It going to be 54
Explanation:
I got it right but I would say it's because the temperature stays the same. So the K value stays the same.
Typically if oxygen has a formal negative charge, it is participating in ____ covalent bond(s). Report your answer as a whole number without any decimal places.
Oxygen is participating in non-polar covalent bond(s)
Oxygen forms 2 covalent bond.
This is because oxygen atoms have 6 valence electrons. This means that it has 2 lone pairs and 2 unpaired electrons that are shared in order to achieve octet configuration.
In this chemistry, the 2 lone pairs on the oxygen are not shared with any other atoms. Instead; they are assigned to the oxygen atom. The formal charge on the oxygen atom is zero. Oxygen's atomic number is 8 and is equal to the sum of the number of its valence and inner shell electrons.
What is non-polar covalent bonding?Nonpolar covalent bonding is a kind of covalent bond in which the bonding electrons are shared equally between the two atoms.
Learn more about non-polar covalent bonding:
https://brainly.com/question/26056508
A farmer digs a small pond in a pasture. The farmer adds young individuals from two species of
algae-eating fish to the ponds and plants some reeds around the edge of the pond. The farmer wants
the pond to be a sustainable ecosystem.
Which of the following would be most helpful in increasing the pond ecosystem’s sustainability?
a. Decreasing the number of plant species around the edge of the pond
b. Introducing older fish of the same species into the population of algae-eating fish
c. Having a greater diversity of living organisms in the pond
d. Adding gravel between the water and where the reeds are planted
If the farmer wants the pond to be more sustainable, he has to have a greater diversity of living organisms in the pond.
What is an ecosystem?The term ecosystem means a self supporting unit in which there is an exchange of materials and energy. The ecosystem is expected to be self sustaining.
When the farmer adds young individuals from two species of algae-eating fish to the ponds and plants some reeds around the edge of the pond, if the farmer wants the pond to be more sustainable , he has to have a greater diversity of living organisms in the pond.
Learn more about ecosystem: https://brainly.com/question/1673533
Answer: Having a greater diversity of living organisms in the pond
Explanation:
STAAR, Plato, proof below
what is the 3rd element on the periodic table?
Answer:
Lithium
Explanation:
The 3rd (third) element on the periodic table is Lithium. Lithium is a soft, silvery, light alkali metal denoted with the symbol Li.
HELP ME OUT PLS!!!!
What is the net force, to the nearest newton, that accelerates the ball?
A) 100 N
B) .000025 N
C) 40,000 N
D) 1000 N
Answer:
100n
Explanation:
f= 0.05*2000=100 N
Fill in the blank to complete each statement
The land that supplies water to a river system is called a
Pollution from a single, identifiable source is called
Pollution that is difficult to link to a particular origin is called
source pollution
source pollution.
Answer:
1- Watershed
2- Point
3- Nonpoint
Explanation:
Just did it
Answer:
1. watershed
2. point
3. nonpoint
Explanation:
A Snickers bar contains 27.0 g of sugars (carbohydrates), 4.0 g of protein and 12.0 g of fat. How many food calories (Cal) are contained in the bar
Answer:
There are 232 calories in the bar
Explanation:
Carbohydrates and protein are both 4 calories per gram, while fat is 9 calories per gram.
[tex]27*4=108\\4*4=16\\12*9=108\\108+108+16=232[/tex]
Given 0.38 grams of N2, how many grams of NaN3 are needed
A chemist measures the amount of bromine liquid produced during an experiment. He finds that 5.9 g of bromine liquid is produced. Calculate the number of moles of bromine liquid produced. Be sure your answer has the correct number of significant digits. 0.03mol
Answer:
below•
Explanation:
6.1 g total?
I don't really know alot about Chemistry
How to polymers work?
Answer:
A polymer is any of a class of natural or synthetic substances composed of very large molecules, called macromolecules, which are multiples of simpler chemical units. Polymers make up many of the materials in living organisms and are the basis of many minerals.
Explanation:
Explanation:
The first man-made polymers were actually modified versions of these natural polymers. Celluloid, the stuff from which silent-movie film was made, was a plastic created from chemically modified cellulose. The first completely synthetic polymer (that is, made by people through chemical synthesis), invented in the early years of the twentieth century, was Bakelite: a plastic made by reacting phenol and formaldehyde under pressure at high temperatures.
# be careful #