A simple pendulum has a period of 3 seconds . If the value of ‘g’ is taken as 9.98 ms-2 calculate the length of the pendulum.

Answers

Answer 1

Answer: The length of the pendulum is approximately 2.495 meters.

Explanation:

The period of a simple pendulum is the time it takes for the pendulum to swing back and forth through one full oscillation. The period of a simple pendulum is related to the length of the pendulum and the acceleration due to gravity (g) by the formula:

Period = 2 * pi * sqrt(length / g)

In this case, you are given that the period of the pendulum is 3 seconds and the value of g is 9.98 ms-2. You can use these values to solve for the length of the pendulum using the formula above.

Substituting in the values given, you get:

3 = 2 * pi * sqrt(length / 9.98)

Solving for length, you get:

length = (3 / (2 * pi))^2 * 9.98

= 0.5^2 * 9.98

= 0.25 * 9.98

= 2.495

Therefore, the length of the pendulum is approximately 2.495 meters.


Related Questions

A 0.480 kg mass suspended from a spring oscillates with a period of 1.50 s. How much mass must be added to the object to change the period to 2.05 s

Answers

The mass added to the object to change the period to 2.05 s is 0.42 kg

What is the time period of an oscillation?

The time taken for an oscillating particle to complete one cycle of oscillation is known as the Period of oscillating particle.

Given :

A 0.480-kg mass suspended from a spring oscillates with a period of 1.50 s.

The formula of the time period is given by:

 [tex]T=2\pi \sqrt{m/K}[/tex] ------(1)

where m is the mass and K is the spring constant.

The new time period is given by:

[tex]T'=2\pi \sqrt{m^{'} /K[/tex]-----(2)

where m' is the total mass after the addition and K is the spring constant.

Dividing equation (1) by equation (2).

[tex]T/T'=\sqrt{m/m'}[/tex]

Now, substitute the known terms in the above expression.

[tex]\frac{1.50}{2.05} =\sqrt{0.480/m'}[/tex]

[tex]m'=\frac{0.480}{0.5329}[/tex]

[tex]m'=0.9[/tex] kg

Now, the mass added to the object to change the period to 2.05 s is given by:

m" = 0.9 - 0.480

m" = 0.42 Kg

Thus, 0.42kg of mass must be added to the object to change the period to 2.05s.

To know more about the time period :

https://brainly.com/question/26146375

#SPJ4

How do you reduce high latency?

Answers

Increasing internet speed and bandwidth will help to solve the latency issues. You'll need a network connection with a minimum speed of 15 mbps in order to use the internet efficiently.

Explanation of the previous response:

Eventually, purchasing faster gear will be your best bet for obtaining lower latency. The system's overall latency can be considerably decreased by a faster CPU and GPU. Using the Reflex SDK's Game and Render latencies in games: If your Game Latency is excessive, think about getting a faster CPU.

In general, a latency (or ping) of 40 to 60 milliseconds (ms) or less is considered acceptable, whereas a speed of more than 100 ms will typically result in a significant lag in gaming. The performance of the game is affected by a number of variables.

the GPU, the HDD or SSD that the game is installed on, the amount and speed of RAM, the number of processing cores, and the speed of the disc.

To learn more about latency visit:

brainly.com/question/14894222

#SPJ4

What velocity must a 2. 25 kg croquet mallet have in order to have the same momentum as 1. 25 kg ball that has a momentum 6. 25 kg•m/s to the west

Answers

2.78 m/s to the west velocity must a 2. 25 kg croquet mallet have in order to have the same momentum as 1. 25 kg ball that has a momentum 6. 25 kg•m/s to the west.

Given,

Mass = 2.25kg

Momentum = 6.25 kg•m/s

To find,

Velocity

Formula used,

Momentum = Mass x velocity

Calculation,

6.25 kg•m/s = 2.25 kg x velocity

Velocity = 6.25/2.25

Velocity = 2.78 m/s

The conservation of momentum principle asserts that the quantity of momentum inside a problem domain remains constant; momentum is not generated nor destroyed, but only modified by the action of forces as defined by Newton's equations of motion.

Newton's third law says that for every force exerted by object A on object B, object B exerts an equal but opposite force in magnitude and direction. Newton utilised this concept to create the law of conservation of momentum.

To learn more about conservation of momentum, here

https://brainly.com/question/29220242

#SPJ4

Which of the following is not a drawback of using coal for energy production?
A. Mountaintop mining
B. Mercury in fly ash
C. Mining explosions
D. Difficult transportation due to instability

Answers

The statement that is not provide a drawback of using coal energy for energy production is (D) difficult transportation due to instability.

What is disadvantage of using coal for energy production?

Coal is source of fossil energy created by dead plant drawn in swamp environments and subjected by geological pressure and forces of heat over hundreds of millions of years. The disadvantage using this source of energy are:

It use mountaintop mining that can contaminate water.It use combustion to create energy and the remaining after combusting has mercury that can fly in form of an ash. As to reminder, mercury can harm nerve when its being inhale.In the process of its mining, the coal commonly result an ash that can combust in the air. The accumulation can cause mining explosions.

Learn more about coal mining here

https://brainly.com/question/25245664

#SPJ4

Ball A has a mass of 3 kg and moves at a velocity of 2 m/s. Ball B has a mass of 1 kg and rolls towards Ball A with a velocity of -4 m/s. After the collision, Ball A has a velocity of -1.5 m/s. What is the velocity of ball B after the collision?
Please show your work.

Answers

The velocity of ball B after the collision is 6.5 m/s.

What is law of conservation of momentum?

According to the law of conservation of momentum, The overall momentum of two or more bodies acting on one another in an isolated system stays constant unless an external force is introduced.

Before collision ,

ball A of mass of 3 kg has velocity = 2 m/s.

ball B of mass of 1 kg has velocity= -4 m/s.

After the collision,

Ball A has a velocity = -1.5 m/s.

Let   Ball B has a velocity = v m/s.

Applying   law of conservation of momentum,

Total initial momentum = total final momentum

3×2 +1×-4 = 3×-1.5 + 1×v

⇒ v = 3×2 +1×-4 - 3×-1.5

⇒ v = 6.5 m/s.

hence, the velocity of ball B after the collision is 6.5 m/s.

Learn more about momentum here:

https://brainly.com/question/24030570

#SPJ1

A 10.0-g bullet is fired into a stationary block of wood having mass m 5 5.00 kg. The bullet imbeds into the block. The speed of the bullet-plus-wood combination immediately after the collision is 0.600 m/s. What was the original speed of the bullet

Answers

The original speed of the bullet was 300.6 m/s.

What is the best meaning of mass?

A measure of the amount of matter contained in or constituting a physical body. In classical mechanics, the mass of an object is related to the force required to accelerate it and hence is related to its inertia, and is essential to Newton's laws of motion.

Given:

mV bi​ +MV wi​ =mV b​ +M Vwf​

where m= mass of bullet =10 g=10^−2 ∣kg

M= mass of wood block =5 kg

V bI​ = initial mass of bullet

Vwi​ = initial mass of wood block and V bf​ =V wf​  

=0.06 m/s 10 −2 Vbi+0(10 −2 +5)0.6 V

bi​ = 10 −2 5.01×0.6​ V

bi​ =300.6 m/s

To know more about mass visit:

brainly.com/question/15959704

#SPJ4

(I know the velocity (1.6m/s) and now I want to find the angle of the vector. )

A rower intends to row his raft at its top speed of 1.5 m/s from the south bank of a river to a point
directly opposite on the north bank. He fails to recognise the river current which pulls a Jog west at
0.50 m/s, What is the raft's resultant velocity with respect to the bank?

Answers

Answer:

R = 1.5 to the northeast

C = .5 to the west

B = C + R       adding vectors head to tail

Vector B will be straight north or directly across the river

B = (1.5^2 - .5^2)^1/2

B = 2^1/2 = 1.41

Adding the vectors as described shows that if the rower rows at 1.5 m/s in a northeasterly direction and the river carries the boat downstream at .5 m/s the net speed of the boat is 1.41 m/s straight north

a child swings on a playground swing with a 2.5 m long chain. what is the period of the child's motion. what is the frequency of the vibration

Answers

The period of the child's motion is 3.171 seconds. The frequency of the vibration is 0.315 Hz.

The time period is 3.171 seconds.

2 × [tex]\pi[/tex] [tex]\frac{L}{g} ^{\frac{1}{2} }[/tex]

= 3.171 seconds

The frequency is the reciprocal of the time period.

f = 1 ÷ 3.171

= 0.315Hz

Learn more about frequency here:-

https://brainly.com/question/29739263

#SPJ4

What is the acceleration when t 0?

Answers

The acceleration of the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Acceleration is the rate of change of velocity. At any point on a trajectory, the magnitude of the acceleration is given by the rate of change of velocity in both magnitude and direction. Acceleration of the body that we can consider is the increasing value of the velocity of any object at a constant rate and that of wee can calculate. Hence by the primary information that we have we can formerly consider that the acceleration which is acting on the particle at t=0 is zero because the particle is in rest position and did not moving at any of the instance or travelling at an uniform speed through out the whole journey or yet did not start from the source point.

Learn more about Acceleration:

brainly.com/question/21509870

#SPJ4

A 1000 kg car is travelling at 67 mph. When it reaches a construction zone the driver brakes for 200 m until the car is travelling at 49 mph. What force did the brakes apply to the car? Assume that there are 1609 metres in one mile and give your answer to the nearest thousand. use v^2 =u^2 +(2xAxS) and F=ma

Answers

Velocity of moving vehicle=v  0, and decceleration =a and Final velocity of the vehicale =0.

What is Velocity?

Once more, the stopping distance is far more than the braking distance. It starts when the threat is identified and concludes when the car stops.

The reaction distance plus the braking distance, or points 1 and 2, together make up the stopping distance.

Therefore, in order to compute the necessary stopping distance, I must determine and add two partial values (reaction distance + brake distance). The reaction time is the amount of time it takes for a driver to spot a danger before braking.

Therefore, Velocity of moving vehicle=v  0, and decceleration =a and Final velocity of the vehicale =0.

To learn more about velocity, refer to the link:

https://brainly.com/question/18084516?

#SPJ1

You need to move a 117-kg sofa to a different location in the room. It takes a force of 109 N to start it moving. What is the coefficient of static friction between the sofa and the carpet

Answers

According to the question, the sofa and carpet have a static friction coefficient of 10.519.

Static Friction: What Is It?

Static friction is defined as a force that maintains an object at rest. when someone tries to move a stationary thing across a platform without actually moving their body or the platform they were moving the object across, they face resistance.

Given:

Wight of sofa = 117 kg

Force= 109N

weight = mass × acceleration due to gravity 117 × 9.8 = 1146.6

the mass is given in kilograms, but work in newtons, thus we multiplied the mass by 9.8

acceleration = Zero

force = resistance

substitute force with 109N and resistance with 1146.6× μ

109 = 1146.6 × μ

μ = 1146.6/109

μ = 10.519

To know more about static friction visit :-

https://brainly.com/question/13000653

#SPJ4

The wheel in the simplified engine of Figure 1 has radius of 0. 250 m and rotates so that the piston oscillates at angular frequency of 12. 0 rad/s. At = 0, the piston is located at =. Calculate the piston’s position, velocity and acceleration at = 1. 15 s. ​

Answers

The piston's position, velocity, and acceleration at t = 1.15 s are :

Position: 3.45 m

Velocity: 3 m/s

Acceleration: 0 m/s^2

To calculate the piston's position, velocity, and acceleration at t = 1.15 s, we need to know the angular position, velocity, and acceleration of the wheel.

The angular position of the wheel at t = 1.15 s is given by

θ = ωt + [tex]A_{0}[/tex]

where ω is the angular frequency, t is the time, and [tex]A_{0}[/tex] is the initial angular position.

Since the angular frequency is given as 12 rad/s and the initial angular position is 0, the angular position of the wheel at t = 1.15 s is

θ = 12 x 1.15 = 13.8 radians

The piston's position is given by

r = Rθ

where R is the radius of the wheel.

Substituting the value of R and θ,

r = 0.25 x 13.8 = 3.45 m

The velocity of the piston is given by

v = r' = Rθ' = Rω

Substituting the values

v = Rω = 0.25 x 12 = 3 m/s

Acceleration of the piston is given by

a = v' = Rθ'' = Rω' = R(ω^2)θ

As the angular frequency is constant, the angular acceleration is 0 so the linear acceleration is also 0.

Note: Linear acceleration is not equal to the derivative of linear velocity, it is equal to the derivative of velocity with respect to time, which is zero in this case.

Read more about linear and angular kinematics :

https://brainly.com/question/12977552


#SPJ4

2. An airboat with mass 3.50 x 102 kg, including the passenger, has an engine that produces a net horizontal force of 7.70 x 102 N, after accounting for forces resistance. a. Find the acceleration of the airboat b. Starting from rest, how long does it take the airboat to reach a speed of 12.0 m/s2

Answers

The acceleration of the airboat which has a mass of 350 kg is 2.2 m/s²

The time the airboat takes to reach the speed of 12 m/s is 5.45 seconds

The mass of the airboat = 350 kg

The net horizontal force of the airboat = 770 N

The acceleration of the airboat can be found using the formula,

         F = ma

where F is the force

           m is the mass

           a is the acceleration

Let us rearrange the above equation, we get

          a = F/m

Let us substitute the known values in the above equation, we get

           a = 770 / 350

              = 2.2 m/s²

The time taken to reach the speed of 12 m/s is

               a = v/t

where a is the acceleration

           v is the velocity

           t is the time taken

Let us rearrange the equation, we get

          t = v/a

Let us substitute the known values in the above equation, we get

          t = 12 / 2.2

           = 5.45 seconds

           

Learn more about the force in

https://brainly.com/question/15321240

#SPJ4

why are earthquakes hard to predict??
answer fast​

Answers

Answer:

Reliable predictions require precursors – some kind of signal in the earth that indicates a big quake is on the way. The signal has to happen only before large earthquakes and it has to occur before all big quakes. At the moment seismologists have failed to find those precursors – if they even exist.

A small rectangular object of unknown material is examined in the laboratory. Iron filings and a compass needle are not attracted to the object. The object is suspended from a light string and is free to swing but does not align itself with Earth’s magnetic field. A strong magnetic field is switched on perpendicular to the long axis of the object. The object changes its orientation so that it partially aligns with the magnetic field. After the field is switched off, the object and string eventually return to their original orientation. Once again, it is observed that iron filings and a compass needle are not attracted to the object. The object most likely is exhibiting the property of

Answers

The object is likely exhibiting the property of diamagnetism.

A small rectangular object of unknown material is examined in the laboratory. Iron filings and a compass needle are not attracted to the object. The object is suspended from a light string and is free to swing but does not align itself with Earth’s magnetic field. A strong magnetic field is switched on perpendicular to the long axis of the object. The object changes its orientation so that it partially aligns with the magnetic field. After the field is switched off, the object and string eventually return to their original orientation. Once again, it is observed that iron filings and a compass needle are not attracted to the object. The object most likely is exhibiting the property of Diamagnetism.

Diamagnetism is a type of magnetism that is exhibited by all materials, and it is the weakest type. It results in a repulsive force between the material and an external magnetic field. This repulsion is what caused the object to partially align with the magnetic field when it was switched on.

The lack of attraction between the iron filings and the compass needle indicates that the object is not ferromagnetic or paramagnetic, which are both stronger types of magnetism. When the magnetic field was switched off, the repulsive force between the object and the field was no longer present, allowing the object and the string to return to their original orientation.

To know more about Diamagnetism:

brainly.com/question/15077478

#SPJ4

Which of the following would be potential impacts of global climate change on thermohaline circulation in the oceans?

A: slowing the rate of circulation


B: no effect of circulation


C: changing the direction of circulation


D: increasing the rate of circulation

Answers

The potential impacts of global climate change on thermohaline circulation in the oceans is increasing the rate of circulation. That is option D.

What is thermohaline circulation?

The thermohaline circulation is defined as the process by which deep-ocean currents are driven by differences in the water's density, which is controlled by temperature (thermo) and salinity (haline).

When there is global climate change increased temperature of water masses would cause these currents to flow faster given the higher kinetic energy of the water molecules.

Therefore, there is increase in rate of circulation when there is global climate change.

Learn more about climate change here:

https://brainly.com/question/24793273

#SPJ1

The electric field near the surface of Earth points downward and has a magnitude of 140 N/C. A. Compare the upward electric force on an electron with the downward gravitational force. (upward force / downward force)b. What magnitude charge should be placed on a penny of mass 6 g so that the electric force balances the weight of the penny near Earth's surface?

Answers

The  me = 9.1 x 10-31 kg the the upward electric force on an electron with the downward gravitational force. C = 0.42 mC is the magnitude charge should be placed on a penny of mass 6 g so that the electric force balances the weight of the penny near Earth's surface.

What is magnitude ?

According to the physics definition, magnitude is just "distance or quantity." It demonstrates how an object moves as it is moving, including whether the movement is absolute, relative, or of a particular size. It serves as a means of describing the size or scope of something. Physicists use the word "magnitude" to indicate size or distance.

What is gravitational force ?

The force of attraction between any two bodies is directly proportional to the product of their masses and is inversely proportional to the square of their distance, according to Newton's universal law of gravitation.

E = 140 N/C

qe = -1.6 x 10-19 C

me = 9.1 x 10-31 kg

A) Fe = qe.E = 1.6 x 10-19. 140 = 2.24 x 10-17 N ( upward )

Fw = me.g = 9.1 x 10-31.9.8 = 8.918 x 10-30 N (down ward )

Fe/Fw = 2.51 x 1012

B) mg = q.E

q = mg/E = (6 x 10-3.9.8) /140

q = 4.2 x 10-4 C = 0.42 mC

Therefore, me = 9.1 x 10-31 kg the the upward electric force on an electron with the downward gravitational force. C = 0.42 mC is the magnitude charge should be placed on a penny of mass 6 g so that the electric force balances the weight of the penny near Earth's surface.

Learn more about magnitude from the given link.

https://brainly.com/question/24256733

#SPJ4

The piton in fig 2. 1. 15 i pulled out of the cylinder from piton x to piton y without changing the temperature of the air encloed if the original preure in the cylinder wa 1. 0 multiply by 10 calculate the air preure when the piton i at poition y

Answers

The pressure at position y to be 10.0, which is the air pressure when the piston is at position y.

If the original pressure in the cylinder was 1.0, and the piston is pulled out from position x to position y without changing the temperature of the enclosed air, the air pressure at position y will be increased. This is due to the change in volume of the cylinder as the piston is pulled out. As the volume increases, the number of air molecules inside the cylinder also increases, which causes an increase in the air pressure.

To calculate the air pressure when the piston is at position y, we can use the gas law known as Boyles' Law, which states that the pressure and volume of a gas are inversely proportional. Therefore, if the volume increases, the pressure will decrease, and if the volume decreases, the pressure will increase.

P₁V₁=P₂V₂

Where P₁ is the initial pressure, V₁ is the initial volume, P₂ is the final pressure, and V₂ is the final volume.

By substituting the given values, we have:

1.0V₁ = P₂(V₁+V)

Where V is the change in volume due to the movement of the piston.

Solving for P₂:

P₂= 1.0*V₁/(V₁+V)P₂= 1.0*1.0/(1.0+V)

As we know, the original pressure is 1.0, and if we multiply it by 10, we will get the final pressure at position y to be 10.0, which is the air pressure when the piston is at position y.

This question is not written in a proper manner. The corrections are:

The piston in fig. 2. 1.15 is pulled out of the cylinder from piston x to piston y without changing the temperature of the air enclosed. If the original pressure in the cylinder was 1.0, multiply by 10 to calculate the air pressure when the piston is at position y.

Learn more about piston–cylinder here: brainly.com/question/24884868

#SPJ4

What part of the scientific method tells us the real answer to the problem?

Answers

Conclusion part of the scientific method tells us the real answer to the problem.

Analysis and Conclusion ,In this step, the experiment's outcomes are determined using appropriate mathematical and other scientific techniques. The study can be used to determine the best course of action moving forward. The hypothesis is accepted if the evidence from the analysis support it.

The scientific method is a procedure used by scientists to explore, confirm, or create a precise and trustworthy model of any natural phenomenon. They are carried out by developing an objective framework for scientific inquiry, analyzing the findings objectively, and drawing a conclusion that either confirms or disproves the initial observation.

To know more about scientific method

https://brainly.com/question/7980104

#SPJ4

If an object was traveling horizontally off a cliff at 9 m/s for 7 seconds, how far did it go?

Answers

The object travelled 63 meters at 9m/s for 7 seconds.

What is distance travelled?

The length of the trajectory taken between the initial and final positions of the moving body is the distance traveled.

To calculate the distance traveled by an object traveling horizontally off a cliff, you can use the formula:

d = v * t

where d is the distance traveled, v is the velocity (9 m/s), and t is the time (7 seconds).

By substituting the given values into the formula, we get:

d = 9 * 7 = 63 meters

So, the object traveled 63 meters horizontally before it hit the ground after being launched off the cliff at 9 m/s for 7 seconds.

To know more about distance, visit:

brainly.com/question/13034462

#SPJ1

How does convection cause tectonic plates to move?

A
Convection keeps the plates thin enough to move.

B
Convection makes the plates solid enough to move.

C
The rising heat of convection currents moves the almost-liquid rocks.

D
The pressure of convection bends rocks until they break completely.

Answers

The plates become sufficiently stable by convection. The almost liquid rocks are moved by the convection currents' growing heat, hence option C is correct.

What are tectonic plates?

Rocks flex under the pressure of convection until they entirely fracture. Radiation decay in the core causes convection currents, which are produced by heat rising and sinking inside the mantle.

In convection currents, the plates are moved. The separation of plates occurs when convection currents split close to the Earth's crust.

Therefore, the convergence of convection currents causes plates to move in the same direction.

Learn more about tectonic plates, here:

https://brainly.com/question/18612190

#SPJ1

13. Shadrach, a form one student performed an experiment to investigate surface tension. he poured some water on a trough and allowed it to settle he then took a razor blade and gently placed it on the surface of the water in an attempt to make it float but failed give two possible reasons why the experiment failed​

Answers

Answer:

this because the surface tension was lowered by using an impurity or rising the temp of the water

A quarterback runs 5 yards backwards and then 15 yards forward.
What is the quarterback's distance traveled?
What is the quarterback's displacement?

Answers

The quarterback also touches the ball on almost every offensive play, and is almost always the offensive player that throws forward passes.

What is the quarterback's?

The quarterback (sometimes abbreviated "QB") is a position in gridiron football, also referred to as the "signal caller" Quarterbacks typically line up directly behind the offensive line and are part of the offensive platoon.

In contemporary American football, the quarterback is typically regarded as the offensive coordinator and is frequently in charge of calling the play in the huddle. The quarterback almost always delivers forward passes for the offence and touches the ball on practically every offensive play.

A sack occurs when the quarterback is beaten behind the line of scrimmage. In contemporary American football, the starting quarterback is typically the offensive coordinator, and his or her accomplishments or shortcomings can have a big impact on the team's performance.

To learn more about quarterback's refer to:

https://brainly.com/question/29689562

#SPJ1

The offensive player who delivers forward passes almost always is the quarterback, who touches the ball on almost every offensive play as well.

The quarterback's, what is it?

In gridiron football, the quarterback, sometimes known as the "signal caller," is one of the positions. As a member of the offensive platoon, quarterbacks often line up directly behind the offensive line.

The quarterback is frequently in charge of calling the play in the huddle and is generally considered as the offensive coordinator in modern American football. In almost every offensive play, the quarterback touches the ball and almost always completes forward throws for the offense.

The quarterback is tackled behind the line of scrimmage, which results in a sack. Currently, the starting quarterback in American football is Usually, the offensive coordinator, and his or her successes or failures, can have a significant effect on the team's performance.

For more information on quarterback kindly visit to

https://brainly.com/question/30040236

#SPJ1

1) Renatta Gass is out with her friends misfortune occurs and renatta and her Friends find themselves getting a workout. They apply a cumulative force Of 1580N to push the car 288m to the nearest fuel station. Determine the work done on the car.

Answers

Work is characterized as a force that causes an object to move or be displaced.  The work done would be 455040.

What is Work?

Work is the scalar product of the force acting on an object and the displacement that force causes when the force is constant.

Despite the fact that work lacks a direction due to the scalar product (or dot product) aspect of vector mathematics, force and displacement are both vector quantities.

"W" stands for work, "F" is the force, and "d" represents displacement (or the distance the object travels).

Therefore, Work is characterized as a force that causes an object to move or be displaced.  The work done would be 455040.

To learn more about work, refer to the link:

https://brainly.com/question/18094932

#SPJ1

What environmental factors can influence genetic variations?

Answers

Some harmful environmental factors can change the nucleotide sequence of a gene. UV rays, for example, can harm DNA strands.

What elements influence genetic variation?

Genetic variations arise during meiosis as a result of mutation and recombination. Chemical or biological mutagens frequently result in mutations. The genetic diversity of organisms is also altered by accidental mating.

What are five examples of environmental variations?

The length at which you want to wear your hair. Scars – from your own unique accidents. The strength of your muscles depends on how much exercise you get. Piercings, whether you decide to have them or not. Mutations are the primary cause of the emergence of genetic variation.

To know more about genetic variations visit:-

https://brainly.com/question/2088746

#SPJ4

Identify work or a task that you’d like to make easier by using a device or tool. Here are a few possibilities: Easily pick up paperclips or pins that have fallen on the floor. Make a bed in less time. Move laundry from a basket into a washing machine without bending down. Sweep the floor without bending down. Rinse a collection of dishes at the same time. Efficiently pass salt and pepper shakers around a table. Rescue somebody from a high place. Choose a task from the list or, better yet, come up with your own. Explain how your tool or device will make the task easier. Note the simple machines that the tool or device will use.

Answers

The work or a task that I'd like to make easier by using a device or tool is sweeping the floor without bending down through the use of a vacuum cleaner.

What is a Device?

This is referred to as a mechanical or electronic equipment which is made or adapted for a particular purpose and makes work easier and faster through technological advancement.

In the case of sweeping the floor without bending down, a vacuum cleaner is most appropriate as it uses an electric motor that spins a fan, thereby resulting in the sucking in of air and any small particles caught up in it thereby making it the correct device to be used.

Read more about Device here https://brainly.com/question/28498043

#SPJ1

why should a counterweight be moveable

Answers

A weight known as a counterweight is one that stabilizes and balances a mechanical system by exerting an opposing force.

Why do moveable flight control surfaces have large counterweights installed in the leading edge?

A counterweight's function is to speed up and improve the efficiency of lifting the load, which conserves energy and reduces wear and tear on the lifting apparatus. A weight known as a counterweight is one that stabilizes and balances a mechanical system by exerting an opposing force.

To lift loads up to 120 tons, tower cranes are utilized at large building sites. In a tower crane, a fixed and a moveable counterweight are held by two arms that extend from the center of the structure. For the purpose of balancing the load, the operator moves the mobile counterweight.

For the purpose of providing offset forces in the flight controls, counter weights are used. With less pressure needed to move the controls, this gives them better "feel" and "feedback" forces.

To learn more counterweight refer to:

https://brainly.com/question/29840021

#SPJ1

A counterweight should  be moveable so as to make lifting the load in a faster and more efficient manner.

What is a counterweight?A counterweight is a weight which has a major purpose to help maintain the stability and balance of a mechanical system by exerting an opposing force. A counterbalance or counterweight is usually used to lift a load more quickly and effectively, which saves energy and reduces wear and tear on the lifting apparatus used with it.The potential energy obtained is equivalent to the work done to lift the counterweight.When the counterweight is being displaced by a force that is acting in the same direction as the applied force, the potential energy gained is equal to that distance it is working or kept.

To know more about counterweight  visit

https://brainly.com/question/17236917

#SPJ1

A 17-N falling object encounters 9 N of air resistance. The magnitude of the net force on the object is

Answers

The magnitude of the net force on the object is 8 N. This is because the force of gravity, which is 17 N, is being opposed by the force of air resistance, which is 9 N. Therefore, the net force is 17 N - 9 N = 8 N.

Force is a push or pull on an object that is caused by an interaction between two objects. It has both magnitude, which is the strength of the interaction, and direction, which is the direction in which the force is being applied.

Net force is the sum of all the forces acting on an object. It is calculated by adding up all the forces that are acting on the object, taking into account their directions. This can be used to calculate the acceleration of an object, as the greater the net force, the greater the acceleration.

Learn more about the force:

https://brainly.com/question/12970081

#SPJ4

2. Why might it be beneficial for a photographer to have a polarizing filter for their camera when taking pictures outdoors

Answers

A polarizing filter can be beneficial for a photographer when taking outdoor pictures because it can reduce glare and reflections from surfaces such as water and glass.

it can also enhance colors, darken blue skies, and reduce the amount of light entering the lens, allowing for more even exposure. This can be especially useful in situations where the sun is very bright and can create harsh shadows and overexposed highlights. The polarizing filter can also reduce the amount of haze in the atmosphere, which can improve the overall clarity of the image. These effects can help a photographer capture more vivid and detailed images, making them stand out from the crowd.

to know more about  polarizing filters refer to  the  link brainly.com/question/13963189

#SPJ4

You have a small globe, which is mounted so that it can spin on the polar axis and can be spun about a horizontal axis (so that the south pole can be on top).
Give the globe a quick spin about the polar axis, and then, before it stops, give it a spin about the horizontal axis. Are there any points on the globe that are at rest?
(A) There are two points, fixed on the globe, that are at rest,
(B) There are two points that are instantaneously at rest, but these two points move around the globe in an apparently random fashion,
(C) At some times two points are instantaneously at rest,
(D) There are no points at rest until the globe stops spinning

Answers

A globe is a miniature replica of the planet. We can see the size, shape, and placement of continents and oceans, which is helpful.

What is used to mount a globe?

A globe's stand is attached to the meridian. Latitude (coordinate) markings can be found on several meridian lines. These markings range from 0° at the equator to 90° at the north and south poles.

The Unisphere is tipped at an angle of 23.5 degrees, which corresponds to the tilt of the Earth.

The globe makes it possible to see the entire planet at a glance. Along with their latitudes and longitudes, it displays many nations, continents, and oceans. The units of latitude and longitude are degrees and minutes.

Altazimuth and Equatorial mounts are the two main categories of astronomical telescope mounts. The simplest sort of mount, known as an altazimuth (sometimes spelled alt-az), has two motions: azimuth (horizontal) and altitude (vertical).

To learn more about globe refer to:

https://brainly.com/question/10911108

#SPJ4

Other Questions
A compound is found to contain 43.64 % phosphorus and 56.36 % oxygen by weight The molecular weight for this compound is 283.88 g/mol. What is the molecular formula for this compound Swimming Pool B is also rectangular and has a perimeter of 90m. Its length is 25m. What is the width? How did the colonists feel about the Articles of Confederation? Do you think it's important to have different medical facilities and not just a hospital with all facilities under one roof? What do you think are the positives and negatives of big hospitals? What types of medical facilities do you envision in the future? What roles does technology play in the modernization of these facilities? Are there any current medical facilities that you think may become obsolete in the future? A shipping container will be used to transport several 150-kilogram crates across the country by rail. The greatest weight that can be loaded into the container is 27500 kilograms. Other shipments weighing 8700 kilograms have already been loaded into the container. Use the drop-down menu below to write an inequality representing cc, the total number of 150-kilogram crates that can be loaded into the shipping container. John had 50$. He spent 60% of the money on clothes and 60% of the remainder on food. a) how much more did he spend on clothes than on food?b) how many percent more did he spend on clothes than on food? The sample points of a sample space are a equally likely events. b equally unlikely events. c simple events. d complex events. what is the equation of the line graphed below? Which of the following would be a consequence in an economy where there is no money?a. There would be no way to save for the future.b. There would be no way to borrow.c. Exchanges would occur more quickly.d. There would be no more exchange.e. Exchanges would take longer. HELPPPPPP PLEASEeeeeeeeeeeeeee Which of the following countries has one of the world's highest levels of macropolitical risk?1. Chile2. South Korea3. Afghanistan4. Denmark Can someone help me with this question: How were Abrahams religious beliefs different from other Mesopotamians during his time? When we first see Thomas sleeping, what color is he wearing? from the movie the matrix what features of Windows 10 available in Linux and OS X allow you to organize your open apps with in workspaces What disorder does Mr. Hyde have? What is the passing of genes from parents to children called? When you want to Add or Remove Filters, you select Data in the ribbon, and then Filter. You would prefer to do this with one click, so you decide to add Filters to the Quick Access Toolbar. Which of the following could you use to accomplish this? 1. Excel Preferences II. Quick Access Toolbar Down Arrow O I only Il only Both I and II Neither I nor II How are individuals and economics similar? A survey was given to a random sample of 550 voters in the United States to ask about their preference for a presidential candidate. Of those surveyed, 264 respondents said that they preferred Candidate A. Determine a 95% confidence interval for the proportion of people who prefer Candidate A, rounding values to the nearest thousandth. seven pounds of fertilizer can cover 1400 square feet.canbe covered by 2 pounds of fertilizer