A very long tube with a cross-sectional area of 1.00 cm2 is filled with mercury to a height of 76.0 cm. At what height would water stand in this tube if it were filled with a mass of water equal to that of the mercury? (The density of mercury is 13.60 g/cm3 and the density of water is 1.00 g/cm3.)

The thermal energy of a material increases with temperature. Therefore, the radiator  has the higher thermal energy.

When the temperature rises, a type of energy called thermal energy is produced. The amount of thermal energy usually directly inversely proportional to the object's change in temperature. Thermal energy takes the form of heat.

The thermal energy of a material increases with temperature. The quicker motions of the substance's atoms and molecules are what cause thermal energy to grow as temperature rises.

In some cases, a substance's molecules will separate from one another and leave because the temperature is just so high. Unexpectedly, thermal energy also affects the states of matter. The radiator  has the higher thermal energy.

Therefore, the radiator has the higher thermal energy.

To learn more about thermal energy, here:

https://brainly.com/question/30288262

#SPJ6

The volume of the gas is 27 ml

The calculation can be done as follows

The first step is to convert the pressure to atm

convert 2280 tors to atm

760 tors= 1 atm

= 2280/780

= 3 atm

The formula is

PV= nRT

The next step is to write out the parameters

Pressure= 3 atm

Temperature= 21 °C

no of moles= 32.1 mole

volume= ?

(r)constant= 8.314

3 × v= 32.1×8.314×21

3v= 81.080

V= 81.080/3

V= 27 ml

Hence the volume of the gas is 27 ml

Please see the link below for more information

https://brainly.com/question/15568262?referrer=searchResults

When comparing an electron's ground state with that of its excited state;

Discussion:

Entropy is simply defined as the degree of randomness otherwise termed disorderliness in a system.

Electrons in their ground state are localized and have lower energy. As such, the entropy is lower.

On the contrary; Electrons in their excited state are delocalized and have higher energy. As such, the entropy is higher.

Read more:

https://brainly.com/question/22655760

Answer:

Ba 80.148%. H 1.77% O 18.657%

will share 2 elctrons with 2 Cl to form

S in column 16 WILL SHARE 2 ELECTRONS WITH 2 /Cl to form

SCl2

,

Answer:

a. carbon    CCl4

b. nitrogen NCl3

c. aluminum AlCl3  

d. sulfur SCl2

Explanation:

10. Based on their valence electrons, how many

atoms of chlorine are expected to bond

with each of the following elements?

a. carbon    CCl4

b. nitrogen NCl3

c. aluminum AlCl3  

d. sulfur SCl2

Cl is in Periodic Table column 17, so it has 7 valence  and needs 1 more to have an electronic structure like its nearest noble gas, Ar.

It then has an oxidation state 0f -1.

Carbon in column  has  +/-4 charge, so 4 Cl will bond with 1 C to make

covalent CCl4

Nitrogen in column 15  is -3.  It will share 3 electrons with 3 Cl to form

covalent NCl3

Al in column 13 give away 3 electrons to 3 Cl to form

ionic AlCl3

S in column 16 will share 2 electrons with 2 Cl and frorm

SCl2

Answer:

Add a volume of a solution of known concentration is added to a volume of another solution in order to determine its concentration. Solutions in which a few drops of phenolphthalein have been added turn from colorless to brilliant pink as the solution turns from acidic to basic.

If you want the method:

Method

1) Use a pipette and pipette filler to add 25 cm3 of alkali solution to a clean conical flask.

2) Add a few drops of a suitable indicator and put the conical flask on a white tile.

3) Fill the burette with dilute acid. Flush the tap through to remove any air bubbles. Ensure the burette is vertical.

4) Slowly add the acid from the burette to the conical flask, swirling to mix. (The mixture may at first change colour, and then back again when swirled.)

5) Stop adding the acid when the end-point is reached (when the colour first permanently changes). Note the final volume reading.

6) Repeat steps 1 to 5 until three results are repeatable (in close agreement). Ideally these should lie within 0.10 cm3 of each other.

I hope it helps.

Answer:

To conduct a titration experiment, first fill the burette with an acid or base solution of known concentration. After that, take a burette reading from the top of the miniscus down to the bottom. Then, underneath the burette, place a flask containing an unknown concentration of acid or base. After that, fill the flask halfway with the appropriate indicator and shake it up. Add your titrate to the flask one drop at a time while stirring constantly. Continue to add the titrate until the color change is noticeable. Finally, take one more look at the burette to make sure everything is correct.

Explanation:

Hope it helps:)

Answer:

you see le bear

you brain sends signals

your heart and lungs receive said signals

spring to action

Before

P1 : 748 mmHg

V1 : 22.5 L

After

P2 : 725 mmHg

V2 : ?

748 mmHg / 22.5 L = 725 mmHg / V2

Cross Multiply...

748 mmHgV2 = 16312.5 mmHgL

748 mmHgV2 / 748 mmHg = 16312.5 mmHgL / 748 mmHg

V2 = 21.808155 L

V2 = 21.8 L (sig figs)

Answer:

B. C6H1206(s) + 602(9) → 6H20(l) + 6C02(9)

Explanation:

You can see that it's balanced;

C6H1206(s) + 602(g)           →            6H20(l) + 6C02(g)

 C  ⇒ 6                                                        C ⇒ 6

 H  ⇒ 12                                                       H ⇒ 6 x 2 = 12

 O  ⇒ 6 + (6 x 2) = 18                                  O ⇒ 6 + (6 x 2) = 18

Answer:

Firstly, try to Go through your chapter and pay attention to main keywords.

secondly try to watch 'Uube' videos related to specific topic instead of chapter and pay attention to it closely and watch it with a keen interest.

Discuss topics that you find harder with your friends or peer group members, Because you learn faster when you study with the people of your age.

Answer:

i think the best way to learn chemistry is study over things that involve it

Explanation:

Answer:

12

Explanation:

There are 4 sulfur atoms in SO4

4×3=12

This means that it turns into 3×(SO4)

=3SO4

Answer:

77%

Explanation:

The formula for finding percent change is change/original.

So, you have to do 0.3/0.39

You have to divide this to get 0.769 which can be rounded 0.77

0.77 as a percentage is 77%

So, the percentage mass increase of the carrot is 77%

Answer:

the correct answer is A. please mark me brainlist

Explanation:

Answer:

geon, Andreas Vesalius. Vesalius describes what he observes during the public dissection of human corpses. By dissecting human bodies, preparing muscles, tendons, and nerves down to the smallest detail, Vesalius is able to prove more than 200 errors in Galen’s anatomical works.

Explanation:

With his comprehensive scientific studies of human bodies, the young professor of medicine not only revolutionizes anatomy, but consequently, the whole science of medicine.

I know I never completely answered your question, I just wanted to explain it was E. None of the above.

The electrostatic forces between molecules of glycerin are the strongest.

We have 4 compounds with their respective boiling points.

The boiling point is the temperature at which a substance passes from the liquid state to the gaseous state.

A high boiling point indicates that the intermolecular forces are strong, so more energy is needed to separate the molecules in the vaporization.

Thus, glycerin, with the highest boiling point, is expected to have the strongest electrostatic forces between their molecules.

The electrostatic forces between molecules of glycerin are the strongest.

Learn more: https://brainly.com/question/2153588

Answer:

Glycerin

Explanation:

Answer:

see explanation

Explanation:

An AX₂E₂ geometry is derived from an AX₄ parent geometry and is based upon 4 regions of electron density about the central element and defines a tetrahedral geometry and the geometry is bent angular.

An example is the water molecule (H₂O) with two covalent O - H bonds and two free pair electrons on the central oxygen element.

Answer:

law of conservation of energy

Answer:

21.86 grams

Explanation:

It is important to note that for every mol of Na3PO4 there is, 3 mols of Na ions are produced.

Na+=1m(0.4l), so mols of Na3PO4= 0.4/3= 0.13333... mols

the molar mass of Na3PO4 is 163.94 grams/mol. 0.1333*163.94=21.86 grams of Na3PO4.

cosh(-cosh(-CH

Simplify the expression using the symmetry of hyperbolic functions

cosh(cosh(CH))

Simplify the expression using the symmetry of hyperbolic functions

the answer is cosh(cosh(CH))

Answer:

3

Explanation:

Glucose is a molecular substance therefore, there are no ionic species in glucose.

Ionic substances dissolve in water to yield ions. Molecular substances do not produce ions in solution. The conductivity of ionic solutions owes to the presence of ions in solutions. Molecular solutions do not conduct electricity due to the absence of ions.

Glucose is a molecular substance hence they are are no ions present hence glucose does not conduct electricity.

Learn more:  https://brainly.com/question/13440572?

Answer:

Collision theory states that molecules must collide to react. For most reactions, however, only a small fraction of collisions produce a reaction.

Answer:

1 would be the answer

protons = atomic # I think

Answer:

hydrogen

Explanation:

hydrogen has the atomic number of 1 which means that hydrogen has one proton and is neutral so it has one electron as well.

The best way to balancing a combustion equation of an organic compound, like the one in the question, is to start balancing the carbon, then the hydrogen and finish with the oxygen. For that you have to split the hydrocarbon into individual elements. And once you have finished you shall always try to reduce the coefficient if possible. Therefore, the answers are A. and C.

Answer:

i) In thee mitochondrion, pyruvate carboxylase converts pyruvate to oxloacetate.

ii) Malate dehydrogenase in the mitochondrion reduces oxaloacete to to malate.

iii) Malate dehydrogenase in the cytoplasm oxidizes malate to oxaloacetate.

iv) Phosphoenolpyruvate carboxykinase decarboxylates and phosphorylates oxaloacetate.forming phosphoenolpyruvate.  

Explanation:

Gluconeogenesis is the synthesis of glucose from non - carbohydrate compounds. The substrates for gluconeogenesis are lactate, pyruvate, amino acids, propionate and glycerol.

Gluconeogenesis occurs only in cytosol but the precursor is produced in mitochondria. In the conversion of pyruvte to phosphoenolpyruvate occur in mitochondria and cytosol.

Step -1:

Pyruvate carboxylase is a biotin dependent enzyme located in mitochondria. It converts pyruvate to oxlaoacetate and carbondioxide in the presence of ATP.Oxlaocetate synthesized in mitochondrial matrix has to be transported to cytosol for gluconeogenesis. Oxaloacetate is impermeble, cannot be sent out of mitochondria. So it has to be converted to malate.

Step -2:

Malate dehydrogenase in mitochondria converts oxaloacetate synthesized in mitochondrial matrix to malate. And then  it is transported to cytosol.

Step 3:

Malate dehydrogenase responsible for reversible reaction in cytosol converts malate to oxaloacetate.

Step -4

Phosphoenolpyruvate carboxy-kinase in cytosol converts oxaloacetate to PEP. The enzyme transfer high energy phosphate bond from GTP to oxaloacetate to from PEP and liberated carbondioxide.

Therefore, the steps of glycolysis converts phosphoenolpyruvate to pyruvate are as follows.

i) In thee mitochondrion, pyruvate carboxylase converts pyruvate to oxloacetate.

ii) Malate dehydrogenase in the mitochondrion reduces oxaloacete to to malate.

iii) Malate dehydrogenase in the cytoplasm oxidizes malate to oxaloacetate.

iv) Phosphoenolpyruvate carboxykinase decarboxylates and phosphorylates oxaloacetate.forming phosphoenolpyruvate.

Explanation:

Explanation:

option C is correct!

hope this answer helps you dear!

[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪  {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]

The Correct choice is ~ C

Atomic mass of Sulfur (S) is 32.1 u

The volume of titrant required for the titration would be 27.44 mL

From the illustration, the initial titrant volume was 2.51 mL. This figure represents the initial reading on the burette.

In the same vein, the final volume of the titrant was 29.95 mL. This figure represents the final reading on the burette.

In order to get the volume of titrant used:

Volume of titrant used = final volume - initial volume

                             = 29.95 - 2.51

                                = 27.44 mL

More on the volume of titrant used in titrations can be found here: https://brainly.com/question/4250180

Answer:

205 calories.

Explanation:

According to the USDA, "Carbohydrates provide 4 calories per gram, protein provides 4 calories per gram, and fat provides 9 calories per gram." 9 grams of fat at 9 calories per equals 81 calories + 6 grams of protein at 4 calories per gram which equals 24 calories + 25 grams of carbohydrate at 4 calories per gram which is equal to 100 calories.

Total that all up and you get 81 cal + 24 cal + 100 cal=205 calories.

I don't know what kind of course this is for, but if they are incredibly picky, what we refer to as "calories" are actually kilocalories, which are equal to one thousand "real" calories each. However, I'm very confident that the correct answer is 205 calories.

The sandwich will provide 205 calories.

A calorie is an energy unit. It's the quantity of heat needed to increase the temperature of one gramme of water by [tex]1^{0} C[/tex] at one atmosphere of pressure.

Its is given that, Fat = 9 g, protein = 6 g, carbohydrate = 25 g.

It is known that, fat contains 9 calories / gram , carbohydrate contains 4 calories / gram and protein contains 4 calories / gram.

Now, adding all terms.

Total calories = (9×9) +(6×4) +(25×4)

= 205 calories.

Therefore, the sandwich will provide a total of 205 calories.

To know more about calories

https://brainly.com/question/22374134.

#SPJ2

Answer:

oxygen

Explanation:

One mole of atoms of oxygen has a mass of 16 g, as 16 is the atomic weight of oxygen, and contains 6.02 X 1023 atoms of oxygen.

Answer:

C4H9

Explanation:

If H = 15.88%

Then C = 100.00 – 15.88 = 84.12

Divide each % value by respective atomic mass

H = 15.88/1 = 15.88

C = 84.12/12 = 7.01

Divide through by smaller value

H = 15.88/7.01 = 2.26

C = 7.01/7.01 = 1

Remove fraction , multiply by 4

H = 9

C = 4

Empirical formula = C4H9

The hydrocarbon could be ( C4H9)2 = C8H18 = octane.