Answer:
It travel's about 4,000 km through the Earth in 13 minutes.
Answer:
4,000 km is the correct answer!!!
What volume (mL) of 0.2173M NaOH is required to titrate 50.00mL of 0.2980M HCI?
Answer: 68.6 mL
Explanation:
We need to use the equation M1V1=M2V2. Molarity's units are in L so we need to convert the 50 ml into L (divide by 1000).
.05(.298)=(x)(.2173)
x = .068 L
to convert to mL we multiply by 1000
.068*1000=68.6 mL
Is Ne an atom or a molecule and is it a pure element or a
compound?
a. Atom, Molecule
b. Molecule, Pure element
c. Atom, Pure element
Answer: A Atom , molecule
Explanation:
hope this helps
For the reaction between ammonium phosphate and lead (IV) nitrate, producing ammonium nitrate and lead (IV) phosphate, how many moles of lead (IV) nitrate would be needed to produce 11.75 moles of ammonium nitrate
Answer:
2.938 mol Pb(NO₃)₄
Explanation:
Step 1: Given data
Moles of NH₄NO₃ to be produced: 11.75 molMoles of Pb(NO₃)₄: ?Step 2: Write the balanced equation
4 (NH₄)₃PO₄ + 3 Pb(NO₃)₄ = Pb₃(PO₄)₄ + 12 NH₄NO₃
Step 3: Calculate the number of moles of Pb(NO₃)₄required to produce 11.75 moles of NH₄NO₃
The molar ratio of Pb(NO₃)₄ to NH₄NO₃ is 3:12.
11.75 mol NH₄NO₃ × (3 mol Pb(NO₃)₄/12 mol NH₄NO₃) = 2.938 mol Pb(NO₃)₄
HELP ASAP FOR 37 please help me out
Answer:
try a dude ummm yes ok yeah
A gas has a volume of 5.0 L and pressure of 633 mmHg. The pressure is increased to 920 mmHg, what is the new volume in L?
Answer:
3.44 LExplanation:
The new volume can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new volume
[tex]V_2 = \frac{P_1V_1}{P_2} \\[/tex]
From the question we have
[tex]V_2 = \frac{5 \times 633}{920} = \frac{3165}{920} \\ = 3.440217...[/tex]
We have the final answer as
3.44 LHope this helps you
Why is it important to control the speed of the chain reaction in a nuclear reactor ?
Atomic bombs use much higher enrichment material with over 90% of U235 to create a massive chain reaction and produce a large amount of energy at one time. The control rods in a nuclear reactor are used to control the speed of the chain reaction and can capture free neutrons before they collide with U235 atoms.
you can thank safari. ♥
Answer:
Atomic bombs use much higher enrichment material with over 90% of U235 to create a massive chain reaction and produce a large amount of energy at one time.
Explanation:
In which region is there most likely to be a volcano? A.D B.B C.A D.C
Answer: A and D
Explanation:
I hope this helps. Sorry if I’m wrong
Answer:
Region D
Explanation:
The region is on the tectonic plate boundaries.
Given the following thermochemical equation 2N2O(g) → 2N2(g) + O2(g) ∆Hº = –166.7 kJ/mol find the amount of heat that will be produced when a 2.25 g sample of N2O(g) decomposes into N2 and O2.A. 8.51 kJB. 4.25 kJC. 74.1 kJD. 2.13 kJE. 37.1 kJ
Answer:
Explanation:
2N₂O(g) → 2N₂(g) + O₂(g)
molecular weight of N₂O = 44
∆Hº = –166.7 kJ/mol
44 g of N₂O decomposes to give 166.7 kJ of heat
2.25 g of N₂O decomposes to give 166.7 x 2.25 / 44 kJ of heat
= 8.51 kJ of heat .
What is the energy photon with a frequency of 2.22 x 10^14 1/s ?
Answer:
1.47 x 10⁻¹⁹J
Explanation:
Given parameters;
Frequency of wave = 2.22 x 10¹⁴/s
Unknown:
Energy of the photon = ?
Solution:
The energy of a photon can be mathematically derived using the expression below;
E = hf
E is the energy
h is the Planck's constant = 6.63 x 10⁻³⁴m²kg/s
f is the frequency
Insert the parameters and solve;
E = 6.63 x 10⁻³⁴m²kg/s x 2.22 x 10¹⁴/s
E = 14.7 x 10⁻²⁰J or 1.47 x 10⁻¹⁹J
Please help me it’s due today at 7:40pm please help me please please help me
Answer:
inertia
Explanation:
Help right know
Students combined baking soda and vinegar and observe bubbles forming.
is it a chemical change or is not a chemical change?
Answer:
it is a chemical change
Explanation:
Common physical changes include melting, change of size, volume, color, density, and crystal form. The classic baking soda and vinegar reaction provides evidence of a chemical change due to the formation of a gas and a temperature change.
Four gases are described below:
Gas A: 5 liters at 20 °C
Gas B: 5 liters at 10 °C
Gas C: 5 liters at 40 °C
Gas D: 5 liters at 30 °C
Which gas has the greatest average molecular kinetic energy?
Gas A
Gas B
Gas C
Gas D
Answer:
B, Gas B.
Explanation:
Calculate the quantity of energy required to change 7.72 mol of liquid water to steam at 100oC. The molar heat of vaporization of water is 40.6 kJ/mol. A. 77.2 kJ B. 40.6 kJ C. 48.3 kJ D. 313 kJ E. 5.26 kJ
Answer:
D. 313 kJ.
Explanation:
Hello!
In this case, since the latent heat of a substance is that heat it releases or absorbs during a phase transition among solid, liquid and gas phases, it is given that it is computed as shown below:
[tex]Q=n*\Delta H_{change}[/tex]
Whereas n are the moles of the substance and the ΔH of change is referred to freezing, melting, condensation, vaporization, sublimation or deposition; therefore, for the vaporization of those gien 7.72 mol of liquid water we obtain:
[tex]Q=7.72mol*40.6kJ/mol\\\\Q=313kJ[/tex]
So the answer is D. 313 kJ.
Best regards!
Within which of Linnaeus's groupings are organisms most closely related to one another?
A) species
B) genus
C) phylum
D) kingdom
Answer:
A) species
Explanation:
Of the Linnaeus's groupings, organisms at the species level are the most closely related to one another.
The species level is the lowest level of classification in the Linnaean system of classification.
Organisms of the same specie are able to interbreed and produce viable offspring. Their offspring are not sterile and are able to reproduce successfully too.Which form of energy is associated with the random motion of particles in a gas?
Answer:
Please mark as brainliest
Explanation:
Ans: Kinetic energy
Another example of kinetic energy is the energy associated with the constant, random bouncing of atoms or molecules. This is also called thermal energy – the greater the thermal energy, the greater the kinetic energy of atomic motion, and vice versa
The energy associated with the random motion of particles in a gas is kinetic energy.
• A form of energy, which an object or a particle possesses due to its motion is known as kinetic energy.
• It is a characteristic of a moving particle or object and relies not only upon its motion but also on its mass.
• The particles of solid are closely packed and thus they cannot move around, therefore, they possess the least kinetic energy.
• The particles of a liquid are less closely clustered, thus they move around and therefore possess more kinetic energy in comparison to solids.
• The gas particles are very loosely packed and possess the tendency to move around spontaneously, and therefore, possess very large kinetic energy.
Thus, kinetic energy is a form of energy associated with the random motion of gas particles.
To know more about:
https://brainly.com/question/2604319
Which type of structure would contain a few non-metal atoms?
Answer:
a simple covalent structure
Explanation:
its has a few non-metal atoms?
What is Bronsted-Lowry definitions an acid
Explanation:
The Brønsted–Lowry theory is an acid–base reaction theory which was proposed independently by Johannes Nicolaus Brønsted and Thomas Martin Lowry in 1923
All atoms of the same ___________ have the same properties
Elements
Compounds
Mixtures
Chemicals
Answer:
Elements
Explanation:
I did a quiz I'm 11 hope it helps\
For the equilibrium that exists in an aqueous solution of nitrous acid (HNO2, a weak acid), the equilibrium constant expression is:_______a. K = [H+][NO2-]/[HNO2] b. K = [H+][N3+][O2-]^2/ [HNO2]c. K= [H+][NO2-] d. K = [H+]^2[NO-]/[HNO2]
Answer:
a. K = [H+][NO2-]/[HNO2]
Explanation:
The computation of the expression of the equilibrium constant is shown below:
Given that the weak acid is HNO_2 that exist in the solution that aqueous
The dissociation equation of [tex]HNO_2[/tex]
[tex]HNO_2(aq) \rightarrow NO_{2}^{-} (aq) + H^{+}(aq)[/tex]
Now
Acidionization constant i.e.
[tex]k_a = \frac{[NO_{2}^{-}][H^{+}]}{HNO_{2}}[/tex]
Therefore the correct option is a.
Hence, the same is to be considered
Write the balanced chemical equations, including states, for the neutralization reactions between: HI (aq) and NaOH (aq) H2CO3 (aq) and Sr(OH)2 (s) *note the strontium compound will be a solid Ca(OH)2 (s) and H2SO4 (aq)
Answer:
* [tex]HI (aq) +NaOH (aq) \rightarrow NaI(aq)+H_2O(l)[/tex]
* [tex]H_2CO_3 (aq) + Sr(OH)_2\rightarrow SrCO_3(s)+2H_2O(l)[/tex]
* [tex]Ca(OH)_2 (s) +H_2SO_4 (aq)\rightarrow CaSO_4(aq)+2H_2O(l)[/tex]
Explanation:
Hello!
In this case, since neutralization chemical reactions are carried out when an acid and a base react to produce a salt and water, for the first reaction, HI (aq) and NaOH (aq), we can write:
[tex]HI (aq) +NaOH (aq) \rightarrow NaI(aq)+H_2O(l)[/tex]
Whereas the salt, sodium iodide remains aqueous and water liquid. Next, when carbonic acid and strontium hydroxide react, strontium carbonate as the salt precipitates out and water is also produced:
[tex]H_2CO_3 (aq) + Sr(OH)_2\rightarrow SrCO_3(s)+2H_2O(l)[/tex]
Finally, when calcium hydroxide and sulfuric acid react, the compound calcium sulfate as the salt and water are produced as shown below:
[tex]Ca(OH)_2 (s) +H_2SO_4 (aq)\rightarrow CaSO_4(aq)+2H_2O(l)[/tex]
Best regards!
Explain the trend in the melting temperatures of the following tetrahedral molecules: a.CF4, 90 K b. CCl4, 250 K c. CBr4, 350 K d. CI4, 440K
Answer:
Explanation:
Intermolecular forces are the forces that hold the molecules together in a substance. The state in which this substance will be at normal atmospheric conditions, and other physical properties such as boiling and melting points, are a consequence of the intermolecular forces.
The type of intermolecular force that happens in nonpolar compounds is dispersion forces. The atom or nonpolar molecule will be disturbed by the proximity of an ion or a polar molecule, thus shifting its electron cloud. The atom or nonpolar molecule will be an induced dipole.
In these tetrahedral molecules, which are not polar, the attractive forces will be London forces, which arise as a consequence of temporary induced dipoles.
Since these forces depend on proximity (the closer the proximity the larger the attraction) those molecules with a higher molar mass will have a larger electron cloud, which will be more susceptible to the effect of an induced dipole in the surroundings (the electrons are on the outer layers will be less attracted by the nuclei).
CF₄ > CCl₄ > CBr₄ >Cl₄
--------------------------------> Increasing size
--------------------------------> Increasing melting point
The melting point increases as the molecules get bigger, that is, as the number of molecules in the molecule increases.
an atom has a mass number of 41 and contains 21 neutrons. which element is it?
The element you are looking for is Scandium, the 4th element in the third group.
What is the correct equation for the solubility product when calcium phosphate is dissolved in water
Answer:
The solubility of calcium phosphate is
2.21x10−4g/L.
Explanation:
If the pressure of 50.0mL of oxygen gas at 100 ºC increases from 735mmHg to 925mmHg, what is the final volume
Given :
The pressure of 50.0 mL of oxygen gas at 100 ºC increases from 735 mm Hg to 925 mm Hg.
Temperature remains constant.
To Find :
The final volume.
Solution :
735 mm Hg = 0.967 atm
935 mm Hg = 1.230 atm
We know, at constant temperature :
[tex]P_iV_i=P_fV_f\\\\V_f=\dfrac{P_iV_i}{P_f}\\\\V_f=\dfrac{0.967\times 50}{1.230}\\\\V_f=39.31 \ mL[/tex]
Therefore, final volume is 39.31 ml.
Hence, this is the required solution.
How much heat, in calories, is needed to raise the temperature of 125.0 g of Lead (c lead = 0.130 J/g°C) from 17.5°C to 41.1°C?
A badly tuned automobile engine can release about 50 moles of carbon monoxide per hour. At 35 ◦C, what volume of carbon monoxide is released in a six-hour period if the atmospheric pressure is 740 Torr?
Answer:
7.79 × 10³ L
Explanation:
Step 1: Calculate the total number of moles of carbon dioxide released
50 moles of carbon dioxide are released per hour. The moles released in a six-hour period is:
6 h × 50 mol/1 h = 300 mol
Step 2: Convert the temperature to the Kelvin scale
When working with gases, we need to consider the absolute temperature. We can convert from Celsius to Kelvin using the following expression.
K = °C + 273.15
K = 35 °C + 273.15 = 308 K
Step 3: Convert the pressure to atm
We will use the conversion factor 1 atm = 760 Torr.
740 Torr × 1 atm/760 Torr = 0.974 atm
Step 4: Calculate the volume of the gas
We will use the ideal gas equation.
P × V = n × R × T
V = n × R × T / P
V = 300 mol × (0.0821 atm.L/mol.K) × 308 K / 0.974 atm
V = 7.79 × 10³ L
It's inventiveness uncertainty and futuristic ideas typically deals with science and technology ......what is it.
Answer:
The uncertainty of inventiveness and futuristic ideas usually deal with science and technology. ... This is usually linked to futuristic ideas, which may not fit in today's society, but which impose improvements, or not, for societies in the future.
Assuming that the only lons contributing to the salt content in the Dead sea is Nat
and Cl" ions, calculate the weight of NaCl(s) in 10.0 L of the sea water after
evaporation. The salt content of the Dead sea is reported as 33.7%. Give your
answer in kg.
Answer:
Answer:
3.37kg of NaCl is the salt content of the dead sea
Explanation:
A concentration of 33.7% means there are 33.7g of NaCl in 100mL of solution.
To solve this question we need to convert 10.0L to mililiters, and then, solve for the mass of NaCl in grams and convert it to kg:
Volume in milliliters:
10.0L * (1000mL / 1L) = 10000mL
Mass of NaCl:
10000mL * (33.7g NaCl / 100mL) = 3370g NaCl
In kg:
3370g * (1kg / 1000g) =
3.37kg of NaCl is the salt content of the dead seaA 25.00 mL sample of 0.320 M KOH is titrated with 0.750 M HBr at 25 °C.
Required:
a. Calculate the initial pH before any titrant is added.
b. What is the initial pH before any titrant was added?
c. What is the pH of the solution after 5.00mL of the titrant was added?
Given that :
Reaction equation ; [tex]HB_{r} + KOH ---> KBr + H_{2}O[/tex]
A) and B) Determine the Initial pH before addition of titrant
First step : compute the value of pOH
pOH = - log ( [OH⁻])
= -log ( 0.320 ) = 0.50
∴ Initial pH before the titrant is added = 14 - pOH
= 14 - 0.5 = 13.5
C ) Determine the pH of solution after 5 mL titrant is added
First step : determine the reacting moles of each substance
n kOH = 0.025 mL * 0.320 mol/L = 0.00800 mol
n HBr = 0.005 * 0.750 mol/L = 0.00375 mol
next step : compute the value of the concentration of OH⁻ in final solution
n kOH ( remaining ) = 0.00800 - 0.00375 = 0.00425 mol
final solution = 25.00 mL + 5.00 mL = 30.00 mL
∴ The value of the concentration of [ OH⁻] in 30.00 mL
= [ OH⁻] = ( 0.0042 mol / 0.0300 mL )
= 0.142 M
hence pOH = - log (0.142) = 0.849
Final step; The pH of the solution after 5 mL of titrant is added
= 14 - pOH
= 14 - 0.849 = 13.15
Hence we can conclude that the initial pH before titrant was added is 13.50 and the pH after is as listed above.
Learn more : https://brainly.com/question/23313870
Are you for or against transgender? why?
Explanation:
that u know right .........................
Answer:
all for it 8) !! i have several friends that are trans in fact.
Explanation:
ppl that don't support trans peeps are going to get punted into the sun with no mercy
im nonbinary, but also identify as trans too (the white stripe on the transgender flag is actually "for those who are transitioning or consider themselves having a neutral or undefined gender," according to Monica Helms, who made the most commonly seen trans flag. :] they don't all identify as trans but can if they want to.
also, a common misconception is that all nonbinary people have to/use they/them pronouns, which is not true. they can use whatever they want because pronouns do not equal gender in most cases. also because they don't have to be put into a strict box of what you can and can't use.