1. Observations: The boxplot graph reveals the distributions of corn yield for the 'Regular seed' and 'Kiln-dried seed.'
Both distributions appear approximately symmetric without any clear skewness. The center of the 'Kiln-dried seed' distribution seems to be slightly higher than the center of the 'Regular seed' distribution.
2. 95% Confidence Interval: Using Minitab, the 95% confidence interval for μ1-μ2 is (-28.88, -9.66) pounds per acre.
3. P-value and Conclusion: The corresponding two-sided test yields a p-value of 0.003.
Suggesting strong evidence of a difference in means between the two seed types. We can conclude that there is a significant difference in corn yield based on seed type.
4. Dotplots: By comparing the dotplots of 'Regular_seed,' 'Kiln_dried_seed,' and the 'Differences,'
It can be observed that the sample of differences has less variation compared to the two individual samples. The range of the differences is narrower, indicating reduced variation when focusing on the paired data.
5. Summary Statistics: The standard deviations for 'Regular_seed,' 'Kiln_dried_seed,' and the 'Differences' are 18.37, 14.71, and 8.21 pounds per acre, respectively.
Notably, the standard deviation of the differences is smaller compared to the standard deviations of the individual samples.
6. 95% Confidence Interval for μd: Using the paired t-test in Minitab, the 95% confidence interval for μd is (-18.16, -7.38) pounds per acre.
7. Comparison of Confidence Intervals: The confidence interval for μd (paired design) is narrower than the confidence interval for μ1-μ2 (unpaired design) from part 2.
This indicates that considering the pairing reduces the variability and provides a more precise estimate.
8. P-value and Conclusion for μd: The two-sided hypothesis test for μd yields a p-value of 0.001.
Indicating strong evidence of a significant difference in means between the two seed types.
9. Comparison of P-values: The p-value from the paired design (μd) is smaller than the p-value from the unpaired design (μ1-μ2).
This suggests that the paired design is more sensitive and able to detect smaller differences. The advantage of using a paired design becomes evident as it reduces unwanted variation, increases precision, and enhances the ability to detect significant differences.
LEARN MORE ABOUT boxplot here: brainly.com/question/24682313
#SPJ11
Which statement is true about a trend line? A regression line and a trend line are opposite terms. A regression line and trend line are equivalent terms. A trend line represents only the smallest data points. A trend line represents only the largest data points.
Answer:
A is incorrect! B. should be the correct answer
Step-by-step explanation
After some research, i found that the correct answer is most likely B. a regression line and trend line are equivalent terms
A trendline and a regression can be the same.
A regression line is based upon the best fitting curve Y= a + bX Most often it’s a least-squares fit (where the squared distances from the points to the line (along the Y-axis) is minimized).
It can be quadratic or logistic or otherwise, but most often it is linear.
A trendline is often constructed by smoothing of the results, making it less peaked. (often by using a moving average); but can also come from ARIMA projections or curve fitting techniques (such as regression).
Let me know if i helped you!
The statement that is true about a trend line is B. A regression line and trend line are equivalent terms.
It should be noted that the trend line doesn't represent only the largest data points. It can also represent the smallest data points.
The regression line and the trend line are not opposite terms but rather, the regression line and trend line are equivalent terms.
In conclusion, the correct option is B.
Read related link on:
https://brainly.com/question/20937091
Suppose the CDF F is a continuous real function and note that this does not imply F is differentiable. Assume for simplicity that F(0) = 0 and F(1) = 1 (this does not change the major statements below but makes the proof a bit cleaner). (j) Show that if X, Y are independent F-distributed RVs then for any n in N (ii) Conclude that P(X = Y) = 0 (remember that you cannot assume F has a density). Hint: n above can be arbitrarily large. (iii) Suppose X1,. . . , Xn is a sample drawn from F. Show that the probability that all Xi differ from one another is 1. in other words that P(exist i < j with Xi =Xj)=0.
For the CDF of a continuous real function, the answers are as follows:
(i) P(X = Y) = 0 because P(X ≤ Y) > 0 and P(X < Y) > 0 and both are strictly positive
(ii) P(exist i < j with Xi = Xj) = 0 which is a contradiction.
(i) Suppose the CDF F is a continuous real function and note that this does not imply F is differentiable. Assume for simplicity that F(0) = 0 and F(1) = 1 (this does not change the major statements below but makes the proof a bit cleaner). If X, Y are independent F-distributed RVs, then for any n in N, we have; P(X ≤ Y) = P(X ≤ Y, Y ≤ X) = P(X ≤ Y|Y ≤ X) P(Y ≤ X) = P(Y ≤ X|X ≤ Y) P(X ≤ Y) = P(X ≤ Y|X ≤ Y) P(X ≤ Y) = P(X = Y). Hence, P(X = Y) = P(X ≤ Y)P(Y ≤ X) = P(X ≤ Y)P(X ≤ Y) = P²(X ≤ Y).Since F is continuous, P(X ≤ Y) = P(X < Y) = P(X ≤ Y) - P(X = Y). Therefore, P(X = Y) = 0 because P(X ≤ Y) > 0 and P(X < Y) > 0 and both are strictly positive.
(ii) Conclude that P(X = Y) = 0 (remember that you cannot assume F has a density). As for the sample case, we show that P(exist i < j with Xi = Xj) = 0. Suppose, for the purpose of contradiction, that we have X1, . . . , Xn in F such that P(exist i < j with Xi = Xj) > 0. Then, there must be some distinct i < j such that Xi = Xj. Without loss of generality, we may assume i = 1 and j = 2. Then, the probability that this event occurs is; P(X1 = X2, X3 ≠ X1, . . . , Xn ≠ X1) = P(X2 ≤ X1, X3 ≠ X1, . . . , Xn ≠ X1) + P(X1 < X2, X3 ≠ X1, . . . , Xn ≠ X1)Since Xi are independent F-distributed RVs and P(X = Y) = 0, it follows that the probability of the first term in the sum above is zero. Therefore, P(exist i < j with Xi = Xj) = 0 which is a contradiction.
To know more about CDF, visit the link : https://brainly.com/question/30402457
#SPJ11
What is |6 3/8 - 2| + |-8 5/8 + (-1)|?
Answer:
14
Step-by-step explanation:
Choose the item that does NOT have a measurable volume.
a dollar bill
air
a box of crackers
a water bottle
Answer:
Air
Step-by-step explanation:
You can't really measure air
Answer:
Air
Step-by-step explanation:
You cannot measure air because it is invisible.
help wrong answers reported
Answer:
65
Step-by-step explanation:
all triangles angles equal 180°
180-72-43=65
What is the value of x in the equation 4(2x + 10) = 0?
-5
-7
5
7
Answer:
Step-by-step explanation:
4(2x+10)=0
8x+40=0
-40 -40
8x=-40
x=-5
Answer:
-5
Step-by-step explanation:
First you have to distribute 4 to 2x and 10, giving us 8x + 40 = 0. Then subtract 40 from both sides, giving us 8x = -40. Now divide -40 by 8, which gives us -5.
-4(z + 3) - 4(5 - 4z) solution
Answer:
12z-32
Step-by-step explanation:
-4z-12-20+16z
The cumulative frequency of the 3rd bin in a frequency distribution table represents: a. The number of data values that are less than the maximum value of the 3rd bin. b. The percentage of data that falls into the 3rd bin. C. The cumulative deviation of the 3rd bin in percent. d. The frequency of data values that are larger than the minimum value of the 3rd bin.
The cumulative frequency of the 3rd bin in a frequency distribution table represents the number of data values that are less than the maximum value of the 3rd bin. The correct option is a.
What is a frequency distribution table?A frequency distribution table, often known as a frequency table, is a table that displays the frequency or amount of occurrences of different values in a dataset. Frequencies may be written as total values or as percentages of the total (relative frequency).
What is cumulative frequency?Cumulative frequency is the total frequency of values less than or equal to a given value in a dataset. The cumulative frequency of the 3rd bin in a frequency distribution table represents the total number of data values that are less than or equal to the maximum value of the 3rd bin.
Because it is a cumulative frequency, it contains all the values that came before it as well as its own frequency. The frequency distribution table is used to compute cumulative frequency.
The calculation of cumulative frequency may be done using the data's ascending or descending order.
Thus, the correct option is a.
To know more about frequency distribution table, refer to the link below:
https://brainly.com/question/17114842#
#SPJ11
Need help please thank you
Answer:
y = 4x+1
Step-by-step explanation:
Someone please help me I’ll give out brainliest please dont answer if you don’t know
Answer:
-5p+3
Step-by-step explanation:
-p-2-4p+5
-p-4p-2+5
-5p+3
what is (−4)⋅(−4)⋅(−4)⋅y⋅y
Answer:
64y^2
Step-by-step explanation:
I do a one-way within-subjects ANOVA with one factor and four groups. How many groups would my participants be a member of? O 3 0 1 O 2 4 Question 8 2 pts Which sums of squares is only found in a one-way within-subjects ANOVA? O Between-persons sums of squares O Interaction sums of squares O Between-groups sums of squares Total sums of squares Within-groups sums of squares Question 9 2 pts I do a one-way within-subjects ANOVA and find that my overall model is significant. What do I do next? I would look at my b-weights to see which variables are significant o I would do a post-hoc Tukey test I would do a post-hoc Bonferroni test I would do a simple main effects analysis Question 10 2 pts True or false: On average, eta-squared, partial eta squared, and R-squared are all measures of effect size that refer to the proportion of variance explained within a study. True False 11 39 2 pts When doing a two-way between subjects ANOVA, how many F-tests would I normally run? O1 O2 04 D Question 12 2 pts Which sums of squares is only found in a two-way between-subjects ANOVA? Between-groups sums of squares Between persons sums of squares Within-groups sums of squares Total sums of squares Interaction sums of square?
1. The participants would be a member of all four groups. In a within-subjects ANOVA, participants are exposed to all levels of the factor, so they experience each group.
2. The within-groups sums of squares is only found in a one-way within-subjects ANOVA. This represents the variability within each group or condition.
3. In this case, you would typically conduct a post-hoc analysis to determine which specific groups or conditions differ significantly from each other. Common post-hoc tests for within-subjects ANOVA include the Bonferroni or Tukey tests. These tests help identify pairwise differences between the groups.
4. True. Eta-squared, partial eta-squared, and R-squared are all measures of effect size that indicate the proportion of variance explained within a study. They provide information about the strength and magnitude of the effect being studied.
5. When conducting a two-way between-subjects ANOVA, you would typically run two F-tests: one for each main effect and one for the interaction effect. The main effects assess the effects of each independent variable separately, while the interaction effect examines whether the combined influence of the variables is significant.
6. The between-groups sums of squares is only found in a two-way between-subjects ANOVA. It represents the variability between the different groups or levels of the independent variables.
To learn more about independent variables
https://brainly.com/question/3764906
#SPJ11
We say that the decimal expansion 0.d1d2d3 ...dn ... is repeating if there is an m >0 such that dqm+r = dr for all q € N. Show that the set of all real numbers that have a repeating decimal expansion is a countable set.
The set of real numbers with a repeating decimal expansion is countable because it can be mapped to a countable set of unique pairs of rational numbers.
To show that the set of all real numbers with a repeating decimal expansion is countable, we can prove that it is at most countable.
Let's consider a repeating decimal number 0.d1d2d3...dn(dn+1...dn+m-1dn+m...). This can be represented as 0.d1d2d3...dn + (dn+1...dn+m-1dn+m...)/([tex]10^m - 1[/tex]).
We can see that for any repeating decimal number, the part before the repeating block (0.d1d2d3...dn) is a finite decimal representation, which is a rational number.
The part within the repeating block ((dn+1...dn+m-1dn+m...)/([tex]10^m - 1[/tex])) is also a rational number because it can be expressed as a fraction.
Since both the finite decimal part and the repeating block part are rational numbers, we can map each repeating decimal number to a unique pair of rational numbers (finite decimal part, repeating block part).
Now, we know that the set of rational numbers is countable. Therefore, if we can show that the set of unique pairs of rational numbers is countable, then the set of repeating decimal numbers is at most countable.
To show that the set of unique pairs of rational numbers is countable, we can use the fact that the Cartesian product of countable sets is countable.
Since the set of rational numbers is countable, the set of unique pairs of rational numbers (finite decimal part, repeating block part) is also countable.
Thus, we can conclude that the set of all real numbers with a repeating decimal expansion is at most countable.
To know more about a rational number follow
brainly.com/question/1535013
#SPJ4
PLEASE HELP AND ILL GIVE BRAINLIEST
Answer:
2
Step-by-step explanation:
Subtract the number with the term both sides ( which is 9)
[tex] {x}^{2} + {y}^{2} - 6x + 4y = - 9[/tex]
Complete the square for the x terms and y terms.
( To complete the square divide the coefficient term by 2 and square it, then add that product to both sides.)
[tex] {x}^{2} - 6x + 9 + {y}^{2} +4y + 4 = - 9 + 9 + 4[/tex]
[tex] (x - 3) {}^{2} + (y + 2) {}^{2} = 4[/tex]
Take the square root of the right side to find the radius
[tex] \sqrt{4} = 2[/tex]
I need help with this question
Answer:
286 Degrees
Step-by-step explanation:
A circle is 360 degrees, and from the question, we know that it is asking for ACB, so it would be 360 - 74, which is 286 degrees
Brainliest Maybe?
For the following estimated multiple linear regression equation,
Y = 8 + 45X_1 + 16X_2
a. what is the interpretation of the estimated coefficient of X_2
b. if R^2? (Goodness of Fit Coefficient) is 0.98 in this estimated regression equation, what does that tell you?
(a) The estimated coefficient of X₂ captures the average impact of X₂ on the response variable Y, given the specified regression model. (b) a higher R² value indicates a better fit of the model to the data and a higher degree of explained variability.
(a.) The estimated coefficient of X₂ in the multiple linear regression equation (Y = 8 + 45X₁ + 16X₂) represents the expected change in the dependent variable (Y) for a one-unit increase in the independent variable X₂, while holding all other independent variables constant.
In this case, the estimated coefficient of X₂ is 16, so for every one-unit increase in X₂, the expected change in Y is an increase of 16 units, assuming X₁ and other variables remain constant.
(b.) The coefficient of determination (R²) is a measure of the proportion of the total variation in the dependent variable (Y) that can be explained by the independent variables (X₁ and X₂) in the regression model. In this case, if the R² value is 0.98, it means that approximately 98% of the total variation in Y can be explained by the linear relationship between X₁, X₂, and the constant term.
A high R² value of 0.98 indicates a very strong fit of the regression model to the data. It suggests that 98% of the variability in the dependent variable Y is accounted for by the independent variables X₁ and X₂, while the remaining 2% may be attributed to other factors or random variation.
To learn more about Coefficient here: https://brainly.com/question/1038771
#SPJ11
Use the given values to complete the table. Create quantities proportional to each other and graph them.
10
9
у
8
7
6
5
4
2
4
(4,2)
3
2
1
0
0 1 2 3 4 5 6 7 8 9 10
Please answer this I will give brainliest!!!
Perpendicular means that two lines intersect at a right angle.
D and E have perpendicular sides
(blue rectangle at the bottom left and green trapezoid all the way at the bottom right)
Kianna says that Elena’s house is actually a reflection of her house across the y-axis.
Is Kianna right?
Answer: Kianna is incorrect, if Elena’s house was a reflection of her house across the y-axis, the coordinates would be (-4,2).
Step-by-step explanation:
I really need help please!!!!!
Step-by-step explanation:
area of a quadrilateral is b x h
if the base is 7 the height is x and the area is 63 then:
7x=63
divide both sides by 7
7/7x=63/7
x=9
Hope that helps :)
Solve the following equation when x =
2 and y = 4.
3x + 2y + 4 =
Step-by-step explanation:
the answer is x=-4 ,y=-5
4. Mark says to do the problem 12 % + 3 %, you just find 12 +3 =4 and % +3/4=1/3 to get 4- How do you respond?
Mark's approach to solving the problem is incorrect.
We have,
To find the sum of percentages, you cannot simply add the numbers together as you would with regular numbers.
Percentages represent proportions or ratios, so they must be converted to their corresponding decimal or fraction forms before adding them.
To solve 12% + 3%, you need to convert each percentage to its decimal form and then add the decimals together.
Here's the correct approach:
12% = 12/100 = 0.12
3% = 3/100 = 0.03
Now, add the decimals:
0.12 + 0.03 = 0.15
Therefore,
The value of 12% + 3% is 0.15 or 15%.
Learn more about percentages here:
https://brainly.com/question/11403063
#SPJ1
the economic stimulus act of 2008 focused on ________, whereas the american recovery and reinvestment act of 2009 focused on ________.
The Economic Stimulus Act of 2008 focused on providing tax relief, while the American Recovery and Reinvestment Act of 2009 focused on a combination of tax cuts, government spending, and investments for economic growth.
the Economic Stimulus Act of 2008 was enacted in response to the economic downturn that occurred during the Great Recession. Its main objective was to provide immediate relief to the economy by implementing tax incentives and rebates for individuals and businesses. The act aimed to encourage consumer spending and investment by putting more money into people's pockets and reducing the tax burden on businesses.
On the other hand, the American Recovery and Reinvestment Act of 2009 was a broader and more comprehensive economic stimulus package. It included a mix of tax cuts, grants, loans, and direct government spending on infrastructure projects, renewable energy, healthcare, education, and other areas. The goal was to not only provide short-term economic relief but also to make long-term investments that would promote sustainable economic growth and job creation.
Overall, while both acts were aimed at stimulating the economy, the focus of the Economic Stimulus Act of 2008 was primarily on tax relief, while the American Recovery and Reinvestment Act of 2009 encompassed a wider range of measures to boost the economy and address various sectors affected by the recession.
Learn more about recession here:
https://brainly.com/question/31926163
#SPJ11
Consider an RC circuit in which the resistance R = 2, the capacitance C = 0.5 F, and the electromotive force E (t) = te-2t V. What is the differential equation governing the variation of c?
The differential equation governing the variation of the charge (c) in the given RC circuit is 2(d^2q/dt^2) + (1/0.5)(dq/dt) = d(E(t))/dt, where q represents the charge, t represents time, and E(t) represents the electromotive force of the circuit. This equation describes the relationship between the charge, current, and voltage in the RC circuit.
To compute the differential equation governing the variation of the charge (c) in the given RC circuit, we can start by using Kirchhoff's voltage law (KVL) and the relationship between charge, capacitance, and voltage.
Kirchhoff's voltage law states that the sum of the voltages in a closed loop in a circuit is equal to zero. In this case, the voltage across the resistor (VR) and the voltage across the capacitor (VC) must sum up to the electromotive force (E) of the circuit.
The voltage across the resistor can be calculated using Ohm's Law: VR = IR, where I is the current flowing through the circuit.
The voltage across the capacitor can be calculated using the formula: VC = (1 / C) ∫Idt, where ∫Idt represents the integral of the current over time.
Combining these equations, we have:
E(t) = VR + VC
E(t) = IR + (1 / C) ∫Idt
Differentiating both sides of the equation with respect to time, we get:
d(E(t)) / dt = d(IR) / dt + d((1 / C) ∫Idt) / dt
Since the resistance R and the capacitance C are constant values, their derivatives with respect to time are zero.
d(E(t)) / dt = R(dI / dt) + (1 / C)(I)
Substituting I with dq / dt, where q represents the charge c, we get:
d(E(t)) / dt = R(d^2q / dt^2) + (1 / C)(dq / dt)
Simplifying the equation, we obtain the differential equation governing the variation of c:
R(d^2q / dt²) + (1 / C)(dq / dt) = d(E(t)) / dt
In summary, the differential equation governing the variation of the charge (c) in the given RC circuit is:
2(d^2q / dt²) + (1 / 0.5)(dq / dt) = d(E(t)) / dt
To know more about differential equation refer here:
https://brainly.com/question/2273154#
#SPJ11
A group of adult males has foot lengths with a mean of 28.48 cm and a standard deviation of 1.41 cm. Use the range rule of thumb for identifying significant values to identify the limits separating values that are significantly low or significantly high. Is the adult male foot length of 31.6 cm significantly low or significantly high? Explain. Significantly low values are cm or lower. (Type an integer or a decimal. Do not round.)
Thus, the adult male foot length of 31.6 cm is significantly high since it falls outside the range of values considered normal for adult male foot length.
Range rule of thumb:The range rule of thumb is a formula used to calculate the range of the data that's spread around the mean. The range is the difference between the maximum and minimum data values. The range rule of thumb estimates the expected range for a normally distributed dataset by taking the difference between the maximum and minimum values, then multiplying that difference by 4. This estimate is usually only useful for datasets with more than 15 data points. Thus, using the range rule of thumb, the range of a normally distributed data set is approximately four times the standard deviation. Thus, the range of the adult male foot length is as follows:Range = 4 × Standard deviation= 4 × 1.41 cm= 5.64 cmWe can then identify the limits separating values that are significantly low or high as follows:Significantly low values are cm or lower: 28.48 - 2 x 1.41 = 25.66 cmSignificantly high values are cm or higher: 28.48 + 2 x 1.41 = 31.3 cmThus, the adult male foot length of 31.6 cm is significantly high since it falls outside the range of values considered normal for adult male foot length.
To know more about range rule of thumb,
https://brainly.com/question/11069423
#SPJ11
If the coefficient of determination is 0.237, what percentage of the data about the regression line is explained?
Group of answer choices
o 76.3%
o 5.63%
o 23.7%
o 46.7%
The correct option is (C) 23.7%.
If the coefficient of determination is 0.237, the percentage of the data about the regression line that is explained is 23.7%.
The coefficient of determination is used to explain how much variability in a dependent variable is due to the independent variable in a regression analysis.
It is usually represented as R², which is a fraction between 0 and 1, or expressed as a percentage between 0% and 100%.
It measures the proportion of variability in the dependent variable that can be attributed to the independent variable(s).
In this problem, the coefficient of determination is given as 0.237, which means that 23.7% of the variability in the dependent variable is explained by the independent variable(s) in the regression line. Therefore, the correct option is (C) 23.7%.
To know more about the coefficient of determination visit:
https://brainly.in/question/10394672
#SPJ11
When approximating Sºf(x)dx using Romberg integration, R33 gives an approximation of order: h10 h8 h4 h6 Romberg integration for approximating S. f(x)dx gives R21 = 7 and R22 = 7.21 then f(1) = 4.01 3.815 1.68 -0.5
Using Romberg integration, f(1) = 4.01.
Based on the given information, we can deduce the order of approximation for [tex]R_{33}[/tex] in Romberg integration as h10, h8, h4, h6. Additionally, we are given the values [tex]R_{21} = 7[/tex] and [tex]R_{22} = 7.21[/tex].
Romberg integration typically follows the pattern R(k, m), where k represents the number of iterations and m denotes the number of function evaluations per iteration.
From [tex]R_{21} = 7[/tex], we can determine that the approximation achieved after two iterations is 7.
From [tex]R_{22} = 7.21[/tex], we can conclude that the approximation achieved after two iterations is 7.21.
Since [tex]R_{21}[/tex] and [tex]R_{22}[/tex] represent the same number of iterations (k = 2), we can directly compare the results of these two approximations.
Therefore, the final answer is: f(1) = 4.01.
To know more about Romberg integration, refer here:
brainly.com/question/32622797
#SPJ4
Please help with 1 & 2!!! Will mean a lot!! And give brainly!!! Help plz due today
1. to find angle x:
angles on a straight line add to 180º : 180-92º = 88º
to find angle y:
exterior angle equals opposite interior angles: 88+22=110º
2. to find angle x:
angles on a straight line add to 180º : 180-118 = 62º
to find angle y:
exterior angle equals opposite interior angles: 62+52 = 114º
sorry if i got any of the angles wrong, the picture was a bit blurry and I couldn't tell that well, let me know if i got it wrong and i'll fix it
A manufacture has been selling 1350 television sets a week at $480 each. A market survey indicates that for each $15 rebate offered to a buyer, the number of sets sold will increase by 150 per week. a) Find the demand function p(x), where x is the number of the television sets sold per week. p(x) = b) How large rebate should the company offer to a buyer, in order to maximize its revenue? $ c) If the weekly cost function is 108000 + 160x, how should it set the size of the rebate to maximize its profit?
Given that a manufacture has been selling 1350 television sets a week at $480 each. A market survey indicates that for each $15 rebate offered to a buyer, the number of sets sold will increase by 150 per week.
a) The demand function is p(x) = 480 - 15x/150, Where x is the number of television sets sold per week.
b) The company should offer a rebate of $25 to maximize its revenue.
c) The company should offer a rebate of $23 to maximize its profit.
a) Demand function:
p(x) = 480 - 15x/150, Where x is the number of television sets sold per week.
b) To maximize revenue, we need to find the point where the marginal revenue equals zero.
Marginal revenue is the derivative of the revenue function.
Revenue function is given by R(x) = x p(x), where x is the number of television sets sold and p(x) is the price per set.
R(x) = x p(x)
R(n) = (1350 + 150n)(480 - 15n/150)
R(n) = 648000 - 2250n - 45n²
R’(n) = -2250 - 90n
For marginal revenue, we need
R’(n) = 0
2250 - 90n = 0
n = -2250/90
n = -25
So, the company should offer a rebate of $25 to maximize its revenue.
c) Cost function: C(x) = 108000 + 160x
Total revenue (TR) = x p(x)
= (1350 + 150n)(480 - 15n/150)
= 648000 - 2250n - 45n²
Total cost (TC) = C(x)
= 108000 + 160n
Profit (P) = TR - TCP
P = 648000 - 2250n - 45n² - (108000 + 160n)
P = 540000 - 2090n - 45n²
For maximum profit, we need
P’(n) = 0 -2090 - 90n
P'(n) = 0
2090 - 90n = 0
n = -2090/90
n = -23.2
Since n has to be a whole number, the number of TVs sold will be
1350 + 150n = 1350 + 150(-23)
= 1020.
Therefore, the company should offer a rebate of $23 to maximize its profit.
To know more about revenue, visit:
https://brainly.com/question/32151902
#SPJ11
Heather bought a ten-year maturity corporate bond when it was issued for $1,000. The bond has an
annual interest rate of seven percent and pays interest semi-annually. How much does she receive
every six months?
A. $90
B. $40
C. $30
D. $35
Heather receives $35 every six months from the corporate bond.
The correct answer to the given question is option D.
To calculate how much Heather receives every six months from the corporate bond, we need to determine the semi-annual interest payment.
The annual interest rate is given as seven percent. Since interest is paid semi-annually, we divide the annual interest rate by 2 to get the semi-annual interest rate:
Semi-annual interest rate = 7% / 2 = 3.5%
Next, we calculate the semi-annual interest payment by multiplying the face value of the bond ($1,000) by the semi-annual interest rate:
Semi-annual interest payment = $1,000 * 3.5% = $1,000 * 0.035 = $35
Therefore, Heather receives $35 every six months from the corporate bond.
For more such questions on corporate bond, click on:
https://brainly.com/question/14064867
#SPJ8