Answer:
Continental polar.
Explanation:
it should be a continental polar air mass because, it is cold.
5.
A girl uses a 3.0 m long ramp to push her 110 kg motorbike up to a trailer, the floor of which is 1.2 m above the ground.
How much work is done on the motorbike?
we can use 3 formula for inclined plane
W=-ΔPE
W=ΔKE
W=mg sinθ. d
let's use the third formula
sinθ = 1.2 : 3
sinθ = = 0.4
W = m.g. sinθ. d
W = 110 x 10 x 0.4 x 3
W = 1320 J
A 5.0-kg block is pulled horizontally across a floor by a string attached to it with an acceleration of 2 m/s2. What is the tension in the string if the coefficient of sliding kinetic friction between the block and floor is 0.2
The tension on the string when the coefficient of sliding kinetic friction between the block and floor is 0.2 is calculated as 19.8N
What is the tension on the string?The force acting on the block in the horizontal direction is given by:
F_net = ma
where F_net is the net force acting on the block, m is the mass of the block, and a is its acceleration.
The force of friction opposing the motion of the block is given by:
F(friction) = μKN
where μK is the coefficient of kinetic friction between the block and the floor, and N is the normal force acting on the block due to the floor.
Since the block is pulled horizontally, the normal force acting on the block is equal and opposite to the weight of the block, which is given by:
N = mg
where g is the acceleration due to gravity.
Therefore, the net force acting on the block is:
Fnet = T - F (friction) = ma
where T is the tension in the string.
Substituting the expressions for F (friction), N, and Fnet, we get:
T - μKmg = ma
Solving for T, we get:
T = ma + μKmg
Substituting the given values, we get:
T = (5.0 kg)(2 m/s^2) + (0.2)(5.0 kg)(9.8 m/s^2)
Simplifying, we get:
T ≈ 19.8 N
Therefore, the tension in the string is approximately 19.8 N.
Learn more on tension here;
https://brainly.com/question/24994188
#SPJ1
Warm air is _____ dense than cold air, and warm air holds _____ moisture than cold air.
Answer:
Warm air is less dense than cold air, and warm air holds more moisture than cold air.
Explanation:
HOPE THIS HELPS AND HAVE A NICE DAY <3
can someone help me and give me the right answer
Answer:
C. sedimentary
Explanation:
Answer:
Sedimentary
Explanation:
Igneous rock- A rock that's formed through the cooling and solidification of magma or lava.
Metamorphic rock- A rock that starts out as another rock and often has a striped appearance.
Volcanic rock- A rock that's formed from lava that erupted from a volcano.
Sedimentary is the only right answer. A Sedimentary rock is a rock thats made from the deposition of lots of pieces of eroded rock particles.
On the Earth, these convection cells form because of the __________ heating of the Earth and changes in pressure.
Group of answer choices:
even
equal
unequal
consistent
On the Earth, these convection cells form because of the unequal heating of the Earth and changes in pressure. Option C is correct.
What is a convection cell?A convection cell is a phenomenon that happens when there are density changes inside a liquid or gaseous medium.
The essential characteristics of a convection cell are rising and/or falling currents, which are caused by density variations.
These convection cells arise on Earth as a result of the Earth's uneven heating and pressure variations.
On the Earth, these convection cells form because of the unequal heating of the Earth and changes in pressure.
Hence,option C is correct.
To learn more convection cell refer:
https://brainly.com/question/17149610
#SPJ1
Multiple point perspective is a system of perspective in which __________________ a. there are a number of vanishing points, usually created by multiple objects. b. there are two vanishing points. c. all lines within the picture lead to a single vanishing point. d. all the sides are measured full size and scaled with the drawing at 30° to the horizontal. please select the best answer from the choices provided a b c d
Multiple point perspective is a system of perspective in which: A. there are a number of vanishing points, usually created by multiple objects.
What is multiple point perspective?Multiple point perspective can be defined as a system of perspective in which each items (objects) has a number of interacting lines with different vanishing points.
This ultimately implies that, a multiple point perspective is a system of perspective which is created with a number of vanishing points, that are usually created by multiple objects.
Read more on multiple point perspective here: https://brainly.com/question/5398474
#SPJ4
Answer:
A
Explanation:
What is the mass of an object that accelerated at 5 m/s^2 and with a force or 45 N ?
The mass of the accelerated object is 9kg.
What is Newton's second law of motion?According to this law, the force is equal to the product of mass of the object and its acceleration.
F =ma
Given is the force F =45 N and the acceleration is 5 m/s², then the mass will be
m = F/a
m = 45/5
m =9kg
Thus, the mass of the object is 9kg.
Learn more about force.
https://brainly.com/question/13191643
#SPJ1
2. What would be the acceleration of the clown at 5 s? (A) 1.6 m/s2 (B) 8.0 m/s2 (C) 2.0 m/s2 (D) 3.4 m/s2 3. After 12 seconds, how far is the clown from her original starting point? (A) 0 m (B) 10 m (C) 47 m (D) 74 m
A ray gets successively reflected from two mirrors inclined at an angle of 40º. If the angle of incidence on the first mirrors is 60º, then the net deviation of this ray is -
a)40º
b)280º
c)80º
d)160º
. Define density. How can you calculate density of an irregular shape solid body.
Answer:
a measure of the amount of information on a storage medium
Density= mass
volume
it symbol is roh
Explanation:
To find density
we need the mass and volume we have to devide both of the
What related fitness components are improved in dancing?
What happens in the gray zone between solid and liquid?
Answer:
Hence, the transition has to cross the grey zone from liquid to solid or solid to liquid. This grey zone transition is crucial, including the intermolecular forces acting on the molecules and each atom, making the change in state from hot to cold and cold to hot.
Explanation:
Answer:
Hence from liquid to solid or solid to liquid the transition has to cross the grey zone. This grey zone transition is is very crucial which includes the inter molecular forces acting on the molecules and each atoms which makes the change in state from hot to cold and cold to hot.
Explanation:
this is based on ideal gas law PV=nRT.
Where P is pressure, V is volume, R is gas constant and T is temperature. Hence from liquid to solid or solid to liquid the transition has to cross the grey zone.
This grey zone transition is is very crucial which includes the inter molecular forces acting on the molecules and each atoms which makes the change in state from hot to cold and cold to hot.
The best example is ice crystal formation and water formation from ice crystal .
Hence the inter molecular force of attraction happens to be involved with changes in grey zone
7
What was the dependant variable? * is it 1,2 or 3?
(1 Point)
1. Type and weight of the block
2. increase in energy transferred
3. Thermometer used
Answer:
Increase is energy transferred
Explanation:
Increase in energy or ∆E depends upon the mass or type of the blockIt also depends upon the surface area etc The thermometer used is useless in this case .Option B is correct
15 PNTS
Select the correct answer. Which of the following is not produced in fission reactions?
A. greenhouse gases
B. heat
C. isotopes
D. neutrons
Answer:
A. Greenhouse gases
Explanation:
Because nuclear fission involves the modification of atoms.
Answer:
Greenhouse gases, because in nuclear fission, we are talking about modifying strictly atoms to get a reaction, therefore it would not make sense for greenhouse gases to be a reaction.
What does nuclear fission have to do with the birth of stars?
Answer:
Fission is the process by which large nuclei (like Uranium) split apart releasing energy. Fusion is the joining of nuclei to make larger nuclei, with the release of energy. A ball of contracting interstellar gas becomes a star like the Sun when fusion reactions start in its center. Then, we say "a star is born."
Answer: When light element atoms are crushed under enough pressure for their nuclei to fuse, a star is formed. All stars are the consequence of a balance of forces: gravity compresses interstellar gas atoms until fusion reactions begin.
Explanation:
A student measures the weight of one bottle cap as 5.03 grams, so he calculates that the weight of 100
bottle caps will be 503 grams. The actual weight of 100 bottle caps is 495 grams. What is the student's percent error?percent error?
Which nucleus completes the following equation?
212 86 Rn-> 4 2 He+?
Answer:
A
Explanation:
208+4=212
84+2=86
The correct answer is A
Which statement about Sagittarius A* is true?
A: It is a quasar.
B: It orbits our sun.
C: It is 26,000 light-years away from earth.
D: It is set to subsume the earth in 100,000 years.
Answer:
It orbits our sun is the correct answer
Sagittarius A* is 26,000 light-years away from earth. Hence, option (C) is correct.
What is Sagittarius A*?Sagittarius A* (Sgr A*), a supermassive black hole at the center of the Milky Way Galaxy with a mass equal to four million Suns, is seen in the constellation of Sagittarius. It is a powerful radio source that is a part of the larger Sagittarius A complex.
One of Chandra's largest observing missions to date led to these new discoveries. In order to obtain the first-ever X-ray photos and energy fingerprints of the multi-million degree plasma swirling around Sgr A*, a black hole with around 4 million times the mass of the Sun, Chandra made observations over the course of nearly five weeks in 2012.
Sgr A* is one of the very few black holes in the cosmos where we can really observe the flow of stuff close by, and it is only 26,000 light years away from Earth.
Learn more about Sagittarius here:
https://brainly.com/question/13233977
#SPJ2
The half-life of radium-226 is 1,600 years and the half-life of carbon-14 is 5,730 years. in one to two sentences, mathematically prove that the decay constant for radium-226 is larger than the decay constant for carbon-14.
please and thank you :)
Explanation:
-226 of 1600
-14 of 5730
-226×16÷100= -36.16
-14×57.3÷100= -802.2
The decay constant for radium-226 is larger than the decay constant for carbon-14.
What is decay constant?Decay constant of radioactive substance is its probability of decay per unit time.
Decay constant for radium-226 is [tex]1.4*10^{-11} /sec[/tex] and for carbon-14 is [tex]3.8*10^{-12} /sec[/tex].
To learn more about Decay constant here
https://brainly.com/question/16623902
#SPJ2
A student says that the two terms speed and frequency of the wave refer to the same thing. What is your response?
Answer:
He is wrong!
Explanation:
Frequency refers to how many wave lengths pass in a second and speed is how fast the wave is traveling for example the speed of light goes really fast but has a mid-level frequency.
Hope this helps! ;-)
The frequency of a wave is 0.05 Hz and the wavelength is 20 m. What is the velocity of the wave?
Answer:
1m/s
Explanation:
wave velocity=frequency × wave length
=0.05 × 20
=1 m/s
A 5-kg ball rolling at a speed of 3 m/s strikes a 2-kg ball at rest. The 5-kg ball then comes to a stop and the 2-kg ball begins to roll forward. Determine how fast the 2-kg ball is moving.
Velocity: _ m/s
Answer:
7.5m/s
Explanation:
Law of conservation of momentum: momentum in a system before collision equals to that after collision/
5kg*3m/s=2kg*v
15kgm/s=2kg*v
v=7.5m/s
How much power is produced if you have a current carrying a 441 j of enegy in 0.19 s?
Answer:
the answer is 2321 watts
Explanation:
power= energy/time
power= 441/0.19=2321.05watts
a table tennis ball launcher fires a tennis ball. what do we know about the impulse on both of the objects?
Answer:
As we know by Newton's III law that if an action force is applied on an object then the reaction force of same magnitude in opposite direction will act on the other.
So here when ball is shot using launcher then the force will be same on launcher as well as ball so we can say
now since force is of same magnitude for both both then we will have
so from above we can say that both ball and launcher will have same impulse but opposite in direction.
Now since ball will have less mass so here it will have more speed while launcher is heavy in mass so its speed is slow or very small as comapre to ball.
In the heat equation what does Q represent
The heat equation is Q = mcT
Q is the total amount of heat transferred to or from something.
In the circuit shown in Fig. E26.17, the voltage across the 2.00 Ω resistor is 12.0 V. What are the emf of the battery and the current through the 6.00 Ω resistor?
The emf of the battery of the given circuit is 18 volts and the current through the 6 ohm resistor is 3A.
What is ohm's law?In a current carrying conductor, the voltage difference V is directly proportional to the current I through the conductor. The constant is called the resistance R.
i.e V=IR.
Emf of the battery is equal to e = V1 +V2
Current through 2 ohm resistor, I2 = V2 /R
I2 = 12/2
I2 =6 A
Voltage through 1 ohm resistor V1 = I1 R
V1 = 6 x 1 =6 volts
Emf of the battery E = 6+12 =18 volts.
The current through 6 ohm resistor is
I = 18 /6 = 3 A
Thus, emf of the battery is 18 volts and the current through the 6 ohm resistor is 3A.
Learn more about ohm's law.
https://brainly.com/question/18827428
#SPJ1
what do you know in climate change?
Climate change is the reason for a lot of factors such as:
Heat-trapping Greenhouse Gases And The Earth's Climate
Greenhouse Gases
Reflectivity or Absorption of the Sun's Energy
Changes in the Earth's Orbit and Rotation
Variations in Solar Activity
Changes in the Earth's Reflectivity
Volcanic Activity
There's a lot more that I could list, but hopefully this will do.
If a 40.1 g piece of iron at 652 °C is dropped into a sample of 328 g of water at 32.4 °C, what will the final temperature be after thermal equilibrium is established? Assume that no heat is lost during the process. specific heat capacity of iron is 0.45 J/g C and water is 4.184 J/g C. SHOW YOUR WORK.
The final temperature of the mixture after thermal equilibrium is reached given the data is 40.4 °C
Data obtained from the questionMass of iron (M) = 40.1 gTemperature of iron (T) = 652 °C Specific heat capacity of iron (C) = 0.45 J/gºCMass of water (Mᵥᵥ) = 328 gTemperature warm water (Tᵥᵥ) = 32.4 °CSpecific heat capacity of the water (Cᵥᵥ) = 4.184 J/gºC Equilibrium temperature (Tₑ) =? How to determine the equilibrium temperatureHeat loss = Heat gain
MC(T – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)
40.1 × 0.45(652 – Tₑ) = 328 × 4.184(Tₑ – 32.4)
18.045(652 – Tₑ) = 1372.352(Tₑ – 32.5)
Clear bracket
11765.34 – 18.045Tₑ = 1372.352Tₑ – 44464.2048
Collect like terms
11765.34 + 44464.2048 = 1372.352Tₑ + 18.045Tₑ
56229.5448 = 1390.397Tₑ
Divide both side by 1390.397
Tₑ = 56229.5448 / 1390.397
Tₑ = 40.4 °C
Learn more about heat transfer:
https://brainly.com/question/6363778
#SPJ1
An object weighing 6 kg moving at a speed of 12 m / s was stopped by a force of 18 newton. At what time does the subject accelerate?
Answer:
F ΔT = Δ(M V)
Change in momentum is equal to applied force* time
Δ(M V) = 6 kg * 12 m / s = 72 kg-m / s
ΔT = 72 kg-m/s / 18 kg-m/s^2 = 6 s after 6 sec it will tend to rebound
When current first leaves the battery, how much voltage does it have
Answer:
depends on the voltage of battery
Explanation:
for example if you connect a battery of 6V,6V will be provided