ALWAYS use significant figure rules. Remember that these rules apply to all numbers that are measurements.
In working this problem, assume the value of "g" to be 9.8 m/s2 with two (2) significant digits unless otherwise stated.
Given that a lever has a mechanical advantage of 6.0 and is 100% efficient, if the resistance is to be lifted 2.0 inches, then how far must the effort move?
De = _____ in.

12
8.0
4.0
3.0
NEXT

Answers

Answer 1

The effort must move 8•0


Related Questions

GIVING THE REST OF MY POINTS!
Energy can be:
A. destroyed or converted to another form.
B. destroyed.
C. created, but never destroyed.
D. converted to another form.

Answers

the answer isssssss D

A 2 kg mass moving along a horizontal surface at 10 m/s is acted upon by a 5 N force of
friction. Calculate the net force?

Answers

Answer:

F = 20.61 N

Explanation:

Given that,

Mass of the object, m = 2 kg

It is moving with a speed of 10 m/s

It is acted upon by a 5 N of friction.

The force of gravity acts in downward direction which is given by :

W = mg

W = 2 × 10 = 20 N

5 N of force is acting in horizonal surface.

The net force is given by the resultant of two vectors as follows :

[tex]F=\sqrt{20^2+5^2} \\\\=20.61\ N[/tex]

So, the net force acting on the object is 20.61 N.

The net force acting on the mass is equal to 13.6 Newton.

Given the following data:

Mass = 2 kgSpeed = 10 m/sForce of friction = 5 N

We know that the acceleration due to gravity (g) of an object on planet Earth is equal to 9.8 [tex]m/s^2[/tex].

To calculate the net force:

First of all, we would determine the normal force acting on the mass.

Mathematically, the normal force is given by the formula:

[tex]F_N = mg[/tex]

Where:

m is the mass of an object. g is the acceleration due to gravity.

Substituting the given parameters into the formula, we have;

[tex]F_N = 2 \times 9.8[/tex]

Normal force = 19.6 Newton

To find net force:

[tex]Net\;force = 19.6 - 5[/tex]

Net force = 13.6 Newton.

Note: We subtracted because friction opposes the motion of an object and as such acts in opposite direction.

Read more: https://brainly.com/question/19046878

why are annowwhisker used to repel stains on fabrics

Answers

Answer:Because it makes the stains like go away which makes the fabrics get not stained so yeah

The attachment is here. It is physics/chem.

Answers

Answer:

Can some body plz explain me plzzz

If no work is done, the total energy is not changed. In that situation, if the kinetic energy changes, what must happen to the potential energy?

Answers

Answer:

the potential energy will also change

Explanation:

kinetic energy and potential energy are inversely proportional to each other, so if kinetic energy changes, potential energy will also change..

A Boy has a ball and throws it straight up into the air with an initial velocity of 6 m/s. Calculate the maximum height of the ball and the time the ball is in the air.

Answers

Answer:

i. 1.84 m

ii. The ball's time in the air is 1.23s.

Explanation:

The ball moves upward (against the gravitational pull) with an initial velocity of 6 m/s.

I. Applying the third equation of free fall, the maximum height is;

[tex]V^{2}[/tex] = [tex]U^{2}[/tex] - 2gs

where the variables have there usual meaning.

[tex]V^{2}[/tex] = 0 m/s, [tex]U^{2}[/tex] = 6 m/s, g = 9.8 m/[tex]s^{2}[/tex].

0 = [tex]6^{2}[/tex] - 2 x 9.8 x s

0 = 36 - 19.6s

⇒ 19.6s = 36

s = [tex]\frac{36}{19.6}[/tex]

 = 1.8367

 = 1.84 m

The maximum height of the ball is 1.84 m.

II. The time the ball was in air can be determined by,

time of flight, T = [tex]\frac{2USin A}{g}[/tex]

where U is the initial velocity of the ball, A is the angle of projection and g is the acceleration due to gravity.

U = 6 m/s, A = [tex]90^{o}[/tex] (since the ball is thrown vertically upward), and g = 9.8 m/[tex]s^{2}[/tex].

T = [tex]\frac{2 *6 Sin90^{o} }{9.8}[/tex]

  = [tex]\frac{12}{9.8}[/tex]

  = 1.2245

T = 1.23s

The ball's time in the air is 1.23s.

A small chunk of wax floats if placed in water. If huge piece of wax that is as heavy as a
car, is placed in water, it will

Answers

The wax would float because of its weight

if a car has traveled 24km in 2 hours, what is the average speed?

Answers

Answer:

12

Explanation:

----------------............

How does the force of gravity change between two planets when the masses ofBOTH planets are doubled?
Fg=G m1m2
d2
O A
2 times the gravity
B.
4 times the gravity
O
C
no change in gravity
Oo
1/2 the gravity

Answers

Answer:

B. 4 times

Explanation:

Fg'=G(2m1)(2m2)/d²

Fg'=4Gm1m2/r²

Where are alkaline earth metals found on the periodic table? Group 1 Group 2 Groups 3–12 Group 17'

Answers

Answer:

B- Group 2...  It says my answer is too short so how ya'll doing today?

The distance recorded for riding a motorcycle on its rear wheel without stopping is more than 320 km! Suppose the rider in this impressive position is traveling with an initial velocity of 8.0 m/s before accelerating. Then the rider travels 40.0 m at a constant acceleration of 2.00 m/s2. What is the rider's velocity after the acceleration?

Answers

Answer:

14.97m/s

Explanation:

Given

Initial velocity of the car u = 8m/s

Distance travelled by the rider S = 40m

Acceleration a = 2m/s²

Required

rider's velocity after the acceleration v

Using the equation of motion

v² = u²+2as

v² = 8²+2(2)(40)

v² = 64+160

v² = 224

v = √224

v = 14.97m/s

Hence the rider's velocity after the acceleration is 14.97m/s

A 58-kg boy swings a baseball bat, which causes a 0.140-kg baseball to move toward 3rd base with a velocity of 38.0 m/s.
Calculate the kinetic energy of the baseball (rounding your answer to the integer).

Answers

Answer:

101 J

Explanation:

Answer:

[tex]\boxed {\boxed {\sf 101 \ Joules}}[/tex]

Explanation:

Kinetic energy can be found using the following formula:

[tex]KE=\frac{1}{2}mv^2[/tex]

The mass of the baseball is 0.140 kilograms and the velocity is 38.0 meters per second.

[tex]m= 0.140 \ kg \\v= 38.0 \ m/s[/tex]

Substitute the values into the formula.

[tex]KE=\frac{1}{2} [0.140 \ kg][(38.0 \ m/s)^2][/tex]

First, evaluate the exponent.

(38.0 m/s)²= 38.0 m/s * 38.0 m/s = 1444 m²/s²

[tex]KE=\frac{1}{2}(0.140 \ kg)(1444 \ m^2/s^2)[/tex]

Multiply the two numbers in parentheses together.

[tex]KE=\frac{1}{2}(202.16 \ kg*m^2/s^2)[/tex]

Multiply the fraction by the number, or divide the number by 2.

[tex]KE=101.08 \ kg*m^2/s^2[/tex]

Round to the nearest whole number. The 0 in the tenth place tells us we can leave the number as is.

[tex]KE\approx 101 \ kg*m^2/s^2[/tex]

1 kg*m²/s² is equal to 1 Joule. Therefore, our answer of 101 kg*m²/s² is equal to 101 Joules (J).

[tex]KE\approx 101 \ J[/tex]

The kinetic energy of the baseball is about 101 Joules.

A copper rod of crosssectional area 0.500 cm2 and length 1.00 m is elongated by 2.00 * 10-2 mm and a steel rod of the same cross-sectional area but 0.100 m in length is elongated by 2.00 * 10-3 mm. Which rod is under greater tensile strain?

Answers

Answer:

They have the same tensile strain

Explanation:

Strain of a material is the ratio of its extension to its original length.

strain = e/lo

e is the extension

lo is the original length

For a copper rod;

e = 2.00 * 10^-2mm

lo = 1.00m

convert 1.00m to mm

1.00m = 1*10^-3mm

get the strain

Strain = 2.00 * 10^-2mm/1*10^-3mm

Strain = 2 * 10^{-2+3}

Strain = 2*10^1 = 20

For the steel

e = 2.00 * 10^-3mm

lo = 0.100m

convert 0.100m to mm

0.1m = 0.1*10^-3mm

0.1m = 10^-4mm

get the strain

Strain = 2.00 * 10^-3mm/10^-4mm

Strain = 2 * 10^{-3+4}

Strain = 2*10^1 = 20

Since the value of their strain are the same, this means that they a re under the SAME tensile strain. No one is greater that the other.

The rod under greater tensile strain is ; Neither of them i.e. They both have the same tensile strain

Given data :

Cross sectional area of copper rod = 0.5 cm²

Length of copper rod  = 1.0 m  = 1 * 10³ mm

Elongation of copper rod ( Ec )  = 2.0 * 10⁻² mm

For Steel

Cross sectional area of steel = 0.5 cm²

Length of steel rod = 0.1 m  = 1 * 10² mm

Elongation of steel rod  ( Es )=  2.0 * 10⁻³ mm

Determine the Tensile strain of each rod

i) For copper rod

Tensile strain = Ec / Length of copper rod

                       = ( 2.0 * 10⁻² ) /  ( 1 * 10³ )

                       = 2.0 * 10⁻⁵

ii) For the steel rod

Tensile strain = Es / Length of steel rod

                       = ( 2.0 * 10⁻³ ) / ( 1 * 10² )

                        = 2.0 * 10⁻⁵

The Tensile strain for the copper rod and the steel rod is the same ( 2.0 * 10⁻⁵ ) This means that both rods are under the same tensile strain

Learn more : https://brainly.com/question/24024159

Someone in a car going past you at the speed of 32 m/s drops a small rock from a height of 2 m. How far from the point of the drop will the rock hit the ground? the acceleration due to gravity is 9.8m/s^2. answer in units of m.

Answers

Answer:

The rock will hit the ground at 20.44 m from the point of the drop

Explanation:

Horizontal Motion

It occurs when an object is thrown horizontally from a height h at an initial speed v.

The range or maximum horizontal distance traveled by the object can be calculated as follows:

[tex]\displaystyle d=v\cdot\sqrt{\frac {2h}{g}}[/tex]

When the small rock is dropped from a car at speed v=32 m/s, it starts a curved path that ends up when the rock hits the ground. The height is h=2 m, thus the range is:

[tex]\displaystyle d=32\cdot\sqrt{\frac {2\cdot 2}{9.8}}[/tex]

[tex]\displaystyle d=32\cdot\sqrt{0.4082}[/tex]

[tex]d=20.44\ m[/tex]

The rock will hit the ground at 20.44 m from the point of the drop

what is the peacocks displacement from 2 to 3 seconds

Answers

1.5 second difference

Under what conditions can an object have forces acting on it, but its motion does not change ?

Answers

Answer: An object at rest has zero velocity - and (in the absence of an unbalanced force) will remain with a zero velocity. Such an object will not change its state of motion.

Explanation: I hoped that helped!!

The number of waves that pass a given point in a second is___.

1- amplitude
2- wavelength
3- frequency
4- wave speed

Answers

Answer:

Frequency

Explanation:

The frequency ( ) of a wave is the number of waves passing a point in a certain time.

What happens when an electrically charged balloon is placed close to an uncharged soda can?

The balloon attracts the can.
The balloon is negatively charged.
The can attracts the balloon.
The can becomes positively charged.

Answers

Answer:

The surface closest to the balloon becomes positively charged, while the far side of the can becomes negatively charged. This results in an attractive force that draws the can to the balloon.

Explanation:

Answer:

The balloon is negatively charged.

Explanation:

hope it helps

What is another example of convection?

(A) A heater in a fish tank the bottom of the tank

(B) Batteries in a flashlight converting chemical energy into light

(C) Touching a stove and burning your hand

(D) Warming up next to a fire on a cold night

Answers

Answer: The answer is c!

A heater in a fish tank warming the water at the bottom of the tank is an another example of convection.

What is convection of heat?

Convection, which is the extensive movement of molecules within gases and liquids, is the mechanism through which heat is transported. Although most of the heat transfer occurs as a result of fluid motion, conduction is initially employed to transfer heat from the item to the fluid.

As a result of material movement, heat is transmitted through fluids by convection.Both gases and liquids can contain it.It might be forced or organic.It is important to transfer part of the fluid in bulk.

Convection is therefore demonstrated by a heater in a fish tank warming the water at the tank's bottom.

Learn more about convection of heat here:

brainly.com/question/16600140

#SPJ2

two monkeys were swinging on vines together. One monkey got stuck hanging from a branch unable to move. the other monkey, who was very smart,knew that to move he needed to have a net force in the direction he wanted to go

Answers

Answer:

Hi, what is the question here?

Explanation:

Happy to help if I'm able to

How might heating the molecules inside the bottle change the motion of the molecules?

Answers

Heat causes the molecules to move faster, (heat energy is converted to kinetic energy ) which means that the volume of a gas increases more than the volume of a solid or liquid. However, gases that are contained in a fixed volume cannot expand - and so increases in temperature result in increases in pressure.

If the net force acting on a moving object is zero, the object will: *
slow down and, eventually, stop.
continue at the same speed but change direction.
O
continue in the same direction but change speed.
O
continue in the same direction with no change of speed.

Answers

Answer: D) continue in the same direction with no change of speed.

In other words, the velocity of the object won't change.

A net force of 0 means that all forces acting on the object are in balance. If the object is in motion, then it stays in motion. If the object is at rest, then it stays at rest. This is newton's first law of motion describing inertia.

2. The word used to represent a chemical reaction is a/an a. Atom b. Formula O c. Equation d. Symbol​

Answers

Answer:

A formula I am pretty sure

Bird man is flying horizontally at a speed of 33m/s and a height of 86m. Bird man releases a turd directly above the start of the field. How far from the start of the field should the robot hold the bucket to catch the turd.

Answers

Answer:

2838

Explanation:

A jogger takes five minutes to run a distance of three kilometres. His speed, in metres per second, is approximately A) 5.5 M/S B) 10 M/S C) 36 M/S D) 4.5 M/S

Answers

Answer:

His speed, in metres per second, is approximately 10m/s. The correct option is B.

Explanation:

Speed is defined as the rate in which an object cover a distance in a given time. It is measured in meters per second ( m/s). From the question, the jogger covered a distance of 3Km which when converted to meter is 3000meters in a given time 5 minutes which is 300seconds. The calculation of his speed in meter per second is shown below:

Distance= 3Km to meters ( as 1000meters = 1Km). Therefore 3× 1000 = 3000m

Time= 5 minutes to seconds ( as 1 minute = 60 Seconds). Therefore 5× 60= 300.

Speed= distance/ time

= 3000/300

= 10m/s

Therefore his speed, in metres per second, is approximately 10.

what can i do to recycle?

Answers

Answer:

You could throw away the following items:

Mixed paper: Newspaper, magazine, junk mail, cardboard, frozen food packaging, wrapping paper, paper bags, etc.

Cans: aluminum, foil, tin, steal, aerosol (empty without pressure) and metal food trays. ...

Unbroken glass: Wine bottles, bottles and jars.

Plastic: Rigid containers like milk jugs, shampoo or water bottles.

Hope this helped

A car’s velocity changes from 35 m/s to stopped in 13 seconds. Calculate
acceleration.

Answers

To find acceleration you use the formula velocity divided by change in time, so if you do this you would get 2.7 rounded but I don’t know if this is correct. 35/13=2.692

At which point does the image appear?
W
X
Y
Z

Answers

Z I think...........
Z I think.....................

would someone just answer this now?

Answers

angle = 90 - 39.4 = 50.6
cos50.6 = adjacent/47.3
(47.3)(cos50.6) = 30.02

The y component of the vector is 30.0 m.

Which of the following best describes a hypothesis?
O A. A question that scientists study
B. A possible answer to a scientific question
C. An explanation supported by many observations
O D. A list of scientific data

Answers

I am 99% sure it is B :)

Answer:

B. A possible answer to a scientific question

Explanation:

It's usually a possible or testable explanation made on the basis of limited evidence as a starting point for further investigation.

Other Questions
Chloroplasts and Mitochondria reproduce independently from the eukaryotic cell it is within.True or false? The two kinds of cells are Prokaryotes and Eukaryotes. How are theydifferent? *O Prokaryotes have a nucleus.OEukaryotes have a nucleus.O Prokaryotes are plant cellsThere is no difference. How is a procedure different than a function?O A function is a subroutine, while a procedure is a parameter.O A procedure and a function are the same thing.A procedure returns a value, while a function does not.A procedure does not return a value, while a function does.DONE what dose 3, 3 in the table indicate??? plzzz helppppp Expand the product (x-3)(x+2) Matea recorded that water levels in one part of the river fell 1.05 millimeters per year for 2.48 years. Describe how you could estimate the total variation in water level. Last week, a chocolate shop sold 4 7/8 ounces of white chocolate. It sold 3 times as much milk chocolate as white chocolate. How many ounces of milk chocolate did the shop sell? what is 3 1/2 miles -3,520 yards (answer in miles) A balance sheet that displays assets and liabilities into current versus noncurrent categories is commonly called a:________a) categorized balance sheet. b) current balance sheet. c) classified balance sheet. d) dual display balance sheet. The suffix- arche means The sum of 2 integers is -1. Their product is -12. What are the integers? What do the dotted lines, indicated with the arrow, represent in the DNA model above? The junctions of codons between individual strands The bond between deoxyribose molecules and phosphates The monomers that make up a polymer The hydrogen bond between complimentary nucleotides Identify the number of solutions or zeros:f(3) = 23 3.75 +27 93157 (Ill give you brainiest)In the Peloponnesian war, why did the Athenians not want to fight Sparta on land?A. Sparta had a very powerful field military.B. The Athenlans wanted to take Sparta's goods.C. Sparta had asked the Persians for help. 5. Declaratory Act (1766)-Why did Parliament issue this tax? Please help me!!!! I will mark as brainlist!! write the algebraic expression that represents the following b. Five less than the quotient of nine and a number c. One half of the sum of six times a number and twenty-two d. Nine less than twice the difference between a number and seven e. Eleven less than a number squared Its my life as a bat story .... Help me What is the solution to this problem and what did he do wrong? 4(x + 2) = 2 (x 3) 5x