An 3000-kg car traveling at 70 m/s takes 5 m to stop under full braking The same car under similar road conditions, traveling at 140 m/s, takes m to stop under full braking: A) 15 B) 3 C) 10 D) 20 E) 5

Electric – power – steering rack. Let's break it down one by one. “Steering rack” is a set of rack and pinion gears that is connected to both front wheels. When we turn the steering wheel, the rack and pinion gears engage in a way that shifts the car wheels to the left or right, which steers the car

Electric systems do not require power steering fluid to work and only draw power when needed, making them more fuel efficient than hydraulic systems. A rack gear and a pinion gear that transmits the steering wheel rotation inside of your car to tire movement outside of your car.

By providing power assist via hydraulic pressure, this system delivers a naturally smooth steering feel and, thanks to the flexibility of control allowed by electric power, offers more precise steering power characteristics.

Hydraulic power steering systems tend to be heavier than electrical systems. Hydraulic power steering systems require hydraulic fluid, which must be changed from time to time. Electrical systems don't use any fluid, so you don't have to do as much maintenance.

To learn more about steering rack visit:

https://brainly.com/question/20796057

#SPJ4

Driving an electric vehicle is preferable if you reside somewhere where coal plants are used to generate power.

Coal-fired power plants generate steam in order to generate electricity. These facilities generate almost 40% of the power used worldwide. Coal plants require enormous amounts of coal. The coal plant uses 9000 tonnes of coal per day. Coal is a flammable sedimentary rock with a colour that is either black or brownish-black, and it is sometimes referred to as coal seams. Coal is essentially made of carbon, with different amounts of other elements, including hydrogen, sulphur, oxygen, and nitrogen. Dead plant matter decomposes into peat, which under the heat and pressure of deep burial for millions of years eventually turns into coal. Coal mining and consumption result in early mortality and disease. The biggest anthropogenic source of carbondioxide causing climate change is coal burning, which harms the ecosystem.

To know more about carbon visit:

https://brainly.com/question/22530423

#SPJ4

This particular honour belongs to Galileo, Newton, and Einstein since they each contributed significantly new ideas in addition to expanding upon and furthering the knowledge of those who came before them.

Briefing:

Galileo Galilei, Isaac Newton, and Albert Einstein always seem to garner the most attention when significant physicists are addressed. As you've seen, though, many of Galileo's discoveries and hypotheses were developed or modified using the findings of those who came before him, including Aristotle.

Galileo Galilei, Isaac Newton, and Albert Einstein always seem to garner the most attention when significant physicists are addressed. However, as you've seen, a lot of Galileo's discoveries and theories were developed or improved upon using the knowledge of those who came before him, including Aristotle.

To know more about physicists , visit:

https://brainly.com/question/17625482

#SPJ1

The value of x =3.

Value is regard that something is held to deserve the important worth or usefullness of something .

In ∆ ABC

<A= <B=<C

Triangle is equilibrium triangle.

All the triangle side will be equal

6x-3=3x+6=5x

=6x-3 =3x+6

=3x=g

X=3

Thus, X = 3

To know more about value click-

https://brainly.com/question/843074

#SPJ1

Answer: The speed at which mass M needs to rotate in order to keep mass m suspended is 0.7071067811865475 m/s.

Explanation:

A transverse wave of amplitude 3 cm, frequency 5 Hz, speed 2 m/s travels on an infinitely long silky. The distance between the two nearest points is 0.4 m.

Given that, amplitude = 3 cm

Frequency = 5 Hz

Speed = 2 m/s

As the wavelength is the measure of distance between two crests or two troughs in a wave, the peaks should be identical.

The distance between the two near-points on the silky is calculated by applying wave equation as follows:

v = f * λ

where, v is the speed

f is the frequency

λ is the wavelength

Making λ as subject, we have, λ = v/f

Substituting the values in the above formula, we have,

λ = v/f = 2/5 = 0.4 m

Thus, the wavelength is found to be 0.4 m.

To know more about wavelength:

https://brainly.com/question/14332479

#SPJ4

The equation of length is fo(1-1/M) and distance used for adjustment of eye piece is 20cm.

A refracting telescope's magnification is calculated by dividing the objective's focal length by the eyepiece's focal length.

e. g. A reflecting telescope has a 5 cm eyepiece and an objective with a focal length of 70 cm. It will be magnified by 70 / 5 = 14.

a) L = fo + fe

M = -fo / fe========> fe = -fo / M

L = fo - fo/M = fo*(1-1/M)

b) M = 50 = -fo/fe

L1 = fo*(1-(1/50)) = 2*(1-(1/50)) = 1.96 m

L2 = fo*(1-(1/50)) = 2*(1-(1/100)) = 1.98 m

d = L2 - L1 = 0.02m = 20 cm

To know more about reflecting telescope -

https://brainly.com/question/1135506

#SPJ4

The plastic deformation of a material under a stress is the permanent deformation.

Plastic deformation is the permanent deformation of a material that occurs when the material is subjected to a stress that is above its yield strength. When a material undergoes plastic deformation, the bonds between the atoms or molecules that make up the material are broken and reformed in a new configuration, resulting in a permanent change in the shape of the material.

Plastic deformation can occur in a variety of materials, including metals, plastics, and ceramics. It is typically characterized by a decrease in the strength and an increase in the ductility of the material, as the material becomes more pliable and able to undergo significant deformation without breaking. The amount of plastic deformation that a material can undergo depends on a variety of factors, including the material's yield strength, the type of stress it is subjected to, and the duration of the stress. Some materials, such as steel, are able to undergo significant plastic deformation before breaking, while other materials, such as glass, are prone to brittle failure and can undergo little or no plastic deformation before breaking.

To know more about   stress   visit : brainly.com/question/929277

#SPJ4

The magnitude of the average force due to air resistance be  188.75 N.

Energy cannot be created or destroyed, according to the rule of conservation of energy. However, it is capable of change from one form to another. An isolated system's total energy is constant regardless of the types of energy present. The law of energy conservation is adhered to by all energy forms. The law of conservation of energy essentially says that

The total energy of the system is conserved in a closed system, also known as an isolated system.

Total energy of the chuck of ice at 553 m tall tower: E = mgh

= 25.0 × 9.8 × 553 Joule = 135485 joule.

If the average force due to air is W the, total energy of the ice at 353 m above the ground:

E = mgh + 1/2mv² + W(553-353)

=  25.0 × 9.8 × 353  + 1/2×25×30² + 200 W

= 97735 + 200 W joule

According to conservation of energy:

135485 =  97735 + 200 W

⇒ 200 W = 37750

⇒ W =  188.75 N.

Hence, the magnitude of the average force due to air resistance be  188.75 N.

Learn more about force here:

https://brainly.com/question/13191643

#SPJ1

The height of the box decreases and the velocity of the box increases.

Energy cannot be created or destroyed according to the rule of conservation of energy. However, it is capable of changing its form. The total energy of an isolated system is constant for all forms of energy.

The law of energy conservation is observed by all energy forms. In a nutshell, the law of conservation of energy asserts that: The whole energy of the system is preserved in a closed system, or a system that is cut off from its surroundings.

As the total mechanical energy of the box is conserved, the potential energy of the box transfers into kinetic energy which refers that the height of the box decreases and the velocity of the box increases.

Learn more about energy here:

https://brainly.com/question/24284560

#SPJ1

According to the given position vs time graph, at the 5th minute, David first starts to move at a positive velocity in the forward direction. Therefore, option D is correct.

The position vs time graph can be defined as where the instantaneous position is plotted on the y-axis and the time is plotted on the x-axis is called a Position vs. time graph.

In the position vs time graph, draw an independent variable on the x-axis while dependent variables will be plotted on the y-axis. The dependent variable should be dependent on the independent variable.

In the given graph the slope of the graph is positive after the fifth minute. The slope of the position vs time graph is representing the velocity. Therefore, David first starts to move at a positive velocity at 5 minutes.

Learn more about position vs. time graph, here:

brainly.com/question/11290682

#SPJ1

The  mental stimulation area would be BEST for Margaret to focus on to convince Kenneth to quit bad habit.

Mental activity plays a significant role in every stage of life, from birth to death. There are numerous benefits of mental stimulation, including those that are protective, emotional, physical, psychological, and neurological.

Anything that stimulates, activates, or enriches the mind is said to be engaging the mind or stimulating the nervous system. Thoughts can offer internal stimulation, while the environment might provide external stimulation. Education, employment, social interaction, and leisure activities are all significant sources of mental stimulation.

Hence, Margaret should concentrate on increasing Kenneth's mental stimulation in order to persuade him to change his bad habit.

Learn more about  stimulation here:

https://brainly.com/question/13962290

#SPJ1

Short essay is most appropriate for this objective because it allows

students to discuss ways in which related concepts differ in their own

words. True-false, matching, and multiple choice formats do not

typically provide as much opportunity for in-depth discussion.

The overall current in the circuit, according to the stated assertion, is 12 -2f + 9j.

When describing however much electricity flows through a connection and how it moves in an electronic circuit, the phrase "electric current" is often employed. It is measured in amperes (A). The ampere number rises as more electricity flows through the circuit.

Briefing:

Since all current in a series circuit travels in the same direction.

We can evaluate the total current that flows in the circuit as follows;

Total current = 1st part current + 2nd part current

Total current =5 – 2f + 7 + 9j

Total amps = 12 –2f + 9j.

To know more about current visit:

https://brainly.com/question/2264542

#SPJ4

The reaction depicted by the equation is a double replacement reaction.

Double-replacement reactions are chemical reactions during which the reactants exchange ions to form two new products entirely. The two compounds participating in double-replacement reactions are usually ionic compounds.

Unlike double-replacement reactions, single-replacement reactions involve the displacement of an atom from a compound by another atom.

Thus, a double-replacement reaction is in the form: [tex]AB + CD --- > AD + CB[/tex]

While a single-replacement reaction is usually in the form: [tex]AB + C --- > AC + B[/tex]

Thus, the reaction [tex]MgBr_2 + 2 NaCl --- > MgCl_2 + 2 NaBr[/tex] is a double replacement reaction.

More on double-replacement reactions can be found here: https://brainly.com/question/29224660

#SPJ1

As a result, the diameter of the shaft, as determined by Mohr's circle method, is 3.4 ksi.

The transformation equation for issues involving plane stress are shown graphically by Mohr's circle. It helps to visualize the relationship between normal and shear loads acting on a stress component at any required direction. This process was developed by a German scientist by the name of Karl Friedrich Mohr. As a result, this procedure was given the moniker Mohr's method. Direct titration is a part of the procedure. Chloride ion solution serves as the analyte in this process, while silver nitrate is utilized to prepare titrants.

The major stress and maximum shear stresses are identified, along with their planes, using Mohr's circle, which also aids in visualizing the normal stress and shear stress acting on the plane. Maximum shear stress (max) equals (σ1-σ2). Mohr's Circle coordinate is represented by the symbols σx,σy. Mohr's Circle Center (C) = ((σ1+2)/2, 0)

J=0.0310 in^4

I=J/2=0.0310/2

I=0.0155 〖in〗^4

T=Tr/J=(240×0.375)/0.031

=2.9ksi

σ=Mr=144×(0.375)

=3.5ksi

σA=σmax=σ avg+R

=1.75+3.4

=5.15ksi

σB=σ min=σ avg-R

=1.75-3.4

=-1.65ksi

T max.=R=3.4ksi

To know more about Mohr's Circle Method visit:

https://brainly.com/question/20985034

#SPJ4

The integration of the area under the curve would give the displacement.

We know that the displacement can be defined as the change in the position of an object in a specified direction. Now we know that the velocity time graph is the kind of graph that shows change in the velocity of the object with time.

Now we can get the displacement of the object as the integral of the area under the curve of the graph and this is going to help us to obtain the entire displacement of the journey of the object.

Learn more about displacement:https://brainly.com/question/11934397

#SPJ1

There are plenty of things we can do to help build up the sea anemone population, but a few ways would be:

A) mate clown-fish to breed,

B) tell people about the problem they're producing, and

C) prohibit the purchase and sale of clown-fish in retailers.

The sea anemone is not a threatened species. The effects of climate change and human activities on sea anemone populations, on the other hand, remain mostly unknown. Clown-fish have a thick mucus covering that shields them from the potentially lethal sting of sea anemones.

According to research, clown-fish and other anemone-fish populations are declining in the wild due to over harvesting for the aquarium trade.

Thus,

A) mate clown-fish to breed,

B) tell people about the problem they're producing, and

C) prohibit the purchase and sale of clown-fish in retailers.

This can we do to help build up the sea anemone population.

To know more about anemone population refer to:

https://brainly.com/question/24081072

#SPJ1

The advantages of deformation processes are surface qualities, strength, and durability. Cold processing of metals has numerous advantages.

In cold settings, metals are distorted to achieve the desired forms. Cold processing of metals has numerous advantages.

The most significant advantage of cold working is the absence of the need for heating equipment and heat energy to raise the temperature of the metal. This is a highly valuable advantage of cold-working metals over heat-working processes.

Because the dimensions do not vary as the temperature rises, greater surface qualities, and dimensional tolerances can be produced.

Because of grain flow, when metal parts are deformed at high temperatures, the desired mechanical characteristics can be acquired in the desired directions.

The strain-hardening phenomenon occurs during the cold deformation of metal parts, resulting in increased strength.

Learn more about metal manufacturing processes here:

https://brainly.com/question/29559556

#SPJ4

The top of the ladder is sliding down the vertical line with a vertical speed of 0.75ft/s when the bottom of the ladder is 6ft from the wall.

Please refer to the image below.

We know from the case, that:

x = 6ft

l = 10ft

dx/dt = 1ft/s

Using the phytagoras theorem, we know that:

y² = 10² - x² ... (i)

Since the speed is the derivative of distance with respect to time, we could use the same concept to the equation (i) above:

2y.dy/dt = (0 - 2x) dx/dt

dy/dt = (x/y) dx/dt ... (ii)

When the ladder slides down and its bottom reach 6ft from the wall, the height of the ladder on the wall is:

y² = 10² - x²

y² = 10² - 6²

h = 8ft

The vertical speed of the ladder is:

dy/dt = (8/6) dx/dt

dy/dt = (8/6) (1)

dy/dt = 0.75 ft/s

Learn more about Vertical Speed here: https://brainly.com/question/129999912

#SPJ4

Complete Question:

A ladder 10ft long rest afainst a vertical wall. If the bottom of the ladder slides away from the wall at a rate of 1ft/s, how fast is the top of the ladder sliding down the wall when the bottom of the ladder is 6ft from the wall?

Initially before the engine is ignited, the weather rocket sits at rest on the top of the spring, and the spring is compressed 0.214m

After the engine is ignited, the rocket speed (that generates a thrust of 200N) when the spring has stretched 40cm is 1.78m/s

Answer to question a.
Given from the question

mass of weather rocket = 12kg

Thrust by rocket Ft = 200N

Spring constant K = 550N/m

Let spring compressed = x meters

Now, let us using the force formula

F rocket = F spring

mass rocket (m) * g (earth gravity) = spring constant (K) * x

12 * 9.8 = 550 * x

117.6 = 550x

x = 0.214m (X₁)

Answer to question b

where y = x₁ + x₂ ; x₁ = 0.214m ; x₂ = 0.4m (stretched 40cm)

y = 0.614

Learn more about weather rocket https://brainly.com/question/10881955

#SPJ4

Answer: decreasing  diagnol lines are constant  dpeed moving  toward the origin

Explanation:

Answer:

(a) 2.20 x 10^-4 N.

Explanation:

To solve this problem, you can use the formula for the gravitational force between two objects:

F = G * (m1 * m2) / r^2

where F is the gravitational force, G is the universal constant of gravitation, m1 and m2 are the masses of the two objects, and r is the distance between them.

Plugging in the given values, we get:

F = (6.67 x 10^-11) * (10,000 kg) * (10,000 kg) / (5.5 m)^2

= 2.20 x 10^-4 N

So the answer is (a) 2.20 x 10^-4 N.

Tell me if this helps :)

The frequency heard by the person is 493.78Hz.

When the train moves toward the stationary observer then:

[tex]F=n(V/V-V_{s})[/tex]

Given:[tex]n=472,V=340m/s,V_{s}=15m/s[/tex]

[tex]F=472(340/340-15)\\F=493.78Hz[/tex]

What are the frequency and pitch of sound?

Sounds are higher or lower in pitch according to the frequency of vibration of the sound waves producing them. A high frequency (e.g., 880 hertz [Hz; cycles per second]) is perceived as a high pitch, and a low frequency (e.g., 55 Hz) as a low pitch.

How does the frequency of sound change with distance?

The frequency of sound doesn't decrease with distance, but it does decrease with increasing distance, meaning it does go through the doppler shift, the same as light. This is why the sound of a car driving by at high speeds drops in frequency as the car passes you.

Thus, the frequency at which the whistle is heard is 493.78Hz

To know more about the Frequency of sound:

https://brainly.com/question/1199084

#SPJ1

452.05 Hz is the frequency at which whistle is heard when the frequency (Hz) a person hears as a train blows its whistle at 472Hz while moving 15m/s toward this person on a freezing cold day.

The No. of oscillations of a wave in fixed unit of time is termed as  frequency. f=1/T .

Given:

Frequency of whistle is =472Hz

The speed of train = 15m/s

Speed of air =340m/s

We use the given formula nA=n( V/V+Vs)

nA= 472(340/340+15)

nA=452.05 Hz

Hence, 452.05 Hz is the frequency at which whistle is heard when the frequency (Hz) a person hears as a train blows its whistle at 472Hz while moving 15m/s toward this person on a freezing cold day.

To know more about frequency visit

https://brainly.com/question/12488973

#SPJ1

The centripetal acceleration of the mass is 10 m/s².

The centripetal acceleration of the mass when it is at the lowest position is calculated as follows;

Tsinθ = ma - mg

where;

when the mass is at the lowest position, θ = 0

The centripetal acceleration of the mass is calculated as follows;

T sin (0) = ma - mg

0 = ma - mg

ma = mg

a = g

Given that g, acceleration due to gravity = 10 m/s²

Hence, a = 10 m/s²

Learn more centripetal acceleration about here: https://brainly.com/question/79801

#SPJ1

The complete question is below:

A mass m is suspended by a massless string forming a simple pendulum of length 2.0 m. The string of the pendulum is initially at an angle of 60° with the vertically downward direction when the mass is released from rest. Calculate the centripetal acceleration of the mass when it is at the lowest position ( take g = 10 m/s²).

Magnesium oxide is created by the ionic bonding of magnesium (Mg) and oxygen (O2). While oxygen has six valence electrons and an of 3,44, magnesium only has two valence electrons and a value of 1,31.

A opposite charges subatomic particle known as an electron can either be free or attached to an atom (not bound). One of the three main types of components within an atom is an e that is bonded to it; the other couple are protons и neutrons.

When sufficiently stimulated, atoms in these materials transition from one energy level to another and inhabit a new orbital. These higher-energy electrons eventually return to their initial energy level after releasing their "excess" energy in form of a light photon.

To know more about Electron visit:

https://brainly.com/question/7038241

#SPJ4

The speed of the car to land safely on the opposite side will be 24.0 m/s. The speed of the car just before it lands on the other side will be 31.0 m/s.

(a) Speed is defined as the rate of change of the distance attained. it is a time-based quantity.

The equation for the position vector will be;

= r = x₀ + v₀xt,y₀ + v₀yt + (1/2)gt²

where,

r = the vector position of the car

vₓ = the initial horizontal velocity

vₐ = initial vertical velocity

t = time

y₀ =the initial vertical position

g =the acceleration due to gravity

v = the velocity at time t

From the figure, the origin of the frame of reference is located at y₀ = 0 and x₀ = 0.

The given position vector from the figure;

= r(final) = (48 -19.5) m

Then, employing the equations for the x and y-components of the vector r final, we will obtain;

= y = y₀ + v₀yt + (1/2)gt²

= y = (1/2)gt²

= -19.5 m = (1/2) X 9.8 X t²

= t = 2 s

By estimating the initial velocity at t = 2.00

The value is x-component of the vector r final is 48.0 m.

= x = x₀ + v₀xt   [x₀ = 0]

= 48 = v₀x X 2

= v₀x  = 24 m/s

Hence the speed of the car to land safely on the opposite side will be 24.0 m/s.

(b) The speed of the car just before it lands on the other side will be 31.0 m/s.

= v = (v₀x,v₀y + gt)

The y-component of v is given by;

= vₐ = v₀y + gt   [v₀y = 0]

=  vₐ = -9.8 X 2

=  vₐ = -19.6 m/s

The resultant speed  of the vector v will be :

= v² = 24² + (-19.6)²

= v = √ (24² + (-19.6)²)

= v = 31 m/s

To know more about resultant Speed:

https://brainly.com/question/13494336
#SPJ4

The complete question:

During a storm, a car traveling on a level horizontal road comes upon a bridge that has washed out. The driver must get to the other side, so he decides to try leap- ing the river with his car. The side of the road the car is on is 21.3 m above the river, while the opposite side is only 1.8 m above the river. The river itself is a raging torrent 48.0 m wide. (a) How fast should the car be traveling at the time it leaves the road in order just to clear the river and land safely on the opposite side? (b) What is the speed of the car just before it lands on the other side?

The ways to tell if a chemical change has occurred due to a reaction include the following below:

This is a term which is referred to as the type of reaction which occurs when the substance's composition is changed and also involves the substance combining with another to form a new substance through the process of bond formation etc.

As a result of a new substance being produced during the reaction, there are certain changes in the color and odor due to the new substance being formed.

The evolution of a gas and the presence of precipitate both depicts the formation of a new substance which are therefore the ways to tell if chemical change occurred in the reaction.

Read more about Chemical change here https://brainly.com/question/19794032

#SPJ1

The time measure as 20 ms is the proper time. The speed of aircraft relative to Earth is 0.89 X c m/s.

Part A:

The time measured by the searchlight of 20 ms is the proper time Because this time is measured by a rest clock with respect to space craft.

Part B:

Speed of the aircraft = v

Initial time = t = 20 ms = 0.020 s

Final time = t' = 0.190 s

Speed of light = c

Using Time dilation equation,

= t' = t / √( 1 - (v/c)²)

= √( 1 - (v/c)²) = t / t'

= ( 1 - (v/c)²) = ( t / t' )²

= ( 1 - (v/c)²) = ( 0.02 / 0.190 )²

= (v/c)² = 1 - 0.011025

Finding roots on both sides,

= (v/c) = 1 - 0.20/0.19

= 0.89 = (v/c)

= v = 0.89 X c m/s

To know more about Time Dialation:

https://brainly.com/question/9756469

#SPJ4

The complete question:

An alien spacecraft is flying overhead at a great distance as you stand in your backyard. You see its searchlight blink on for 0.150 s . The first officer on the craft measures the searchlight to be on for 18.0 ms . Part A Which of these two measured times is the proper time? 0.150 s 18.0 ms Part B What is the speed of the spacecraft relative to the earth, expressed as a fraction of the speed of light, c?