an ideal vapor-compression refrigeration cycle operates at steady state with refrigerant 134a as the working fluid. saturated vapor enters the compressor at 2 bar, and saturated liquid exits the condenser at 8 bar. the mass flow rate of refrigerant is 7 kg/min. determine

Answer:

Answer:

let the first point be a second be b third be c fourth be d and last point be e.

The point a and d are incorrect. because tye plotting of the is incorrect

(1) Relief valves are components used in pneumatic systems to prevent harm. (2) Pneumatic and hydraulic systems both employ check valves. A- Both Nos. 1 and 2 are accurate in relation to the aforementioned assertions.

Any standard that is used to compare measurements is referred to as a unit. Measurements of a property that have been taken using various units—for example, inches to centimeters—can be accommodated using unit conversions.

The metric system, sometimes referred to as the SI, is the accepted unit of measurement on a global scale. World Metrology Day is an international holiday commemorating the signing of the International Treaty of the Meter in Paris on May 20, 1875, by seventeen nations, including the United States.

To know more about Units visit:

https://brainly.in/question/11622331

#SPJ4

The resistance of the wire, given that it is connected to a 9.0 V power pack and an ammeter is 36 ohms

From Ohm's law, we understood that the voltage, current and resistance are related according to the following formula:

Voltage (V) = Current (I) × resistance (R)

V = IR

Using the above formula, we can obtain the resistance of the wire as follow:

Voltage (V) = Current (I) × resistance (R)

9 = 0.25 × resistance

Divide both sides by

Resistance = 9 / 0.25

Resistance = 36 ohms

Thus, we can conclude that the resistance of the wire is 36 ohms

Learn more about resistance:

https://brainly.com/question/23960560

#SPJ1

Yes, the range would change. Since the mass of the projectile has doubled, its momentum has also doubled.

Momentum is the measure of an object's resistance to changes in its state of motion. It is a vector quantity, meaning it has both magnitude and direction. Momentum is calculated by multiplying the mass and velocity of an object. Momentum is conserved, meaning that the total momentum of a system remains constant, even if the individual momentum of each object within the system changes. In a collision between two objects, the total momentum before the collision is equal to the total momentum after the collision. Momentum is a powerful concept and has many applications in physics. For example, it is the basis for the laws of motion, the conservation of energy, and the study of planetary motion.

Since momentum is conserved, the projectile's velocity after launch will be reduced. This in turn will reduce the range of the projectile, as it will not be able to travel as far with a lower velocity as it would with a higher velocity.

To learn more about momentum
https://brainly.com/question/18798405
#SPJ4

This range would increase 4 times.

What does the term "projectile motion" refer to?

The movement of an object that has been launched into the air is known as projectile motion. Only gravity is felt by the item after the initial force that launches it. Projectile and trajectory both refer to the same thing: an object.

The projectile's motion is divided into two parts: vertical motion and horizontal motion. Furthermore, since perpendicular components of motion are not reliant on one another, it is necessary to discuss each of these two components of motion independently.

Range of projectile is  R=(vi²sin2∅)/g

So when the velocity is doubled, Range R will be

I.e R'= ((2Vi)²sin2∅)/g

R'=4(Vi²sin2∅)/g

R'=4R

To learn more about projectile motion use link below:

https://brainly.com/question/10680035

#SPJ4

There is no gap in Earth's crust due to presence of magma beneath the Earth crust which usually erupt to fill the gap in the Earth crust.

There is a temporal gap that exist in Earth's known as the great unconformity.

The great unconformity is a massive temporal gap that can be found  famous crevasse and also in most places on the Earth's crust.

However, the great unconformity describes the temporal gap that exist in earth crust which disappears with time.

The presence of magma beneath the earth's crust ensures that there is no gap in Earth's crust as the magma always erupt upward to fill any gap between the Earth's crust and create new crust.

Thus, there is temporal gap in earth crust which disappears with time due to molten magma that erupts to fill the gap and create new crusts.

Learn more about Earth crust here: https://brainly.com/question/21302562

#SPJ1

A field line is drawn at a location that is perpendicular to the net. Therefore, the tangent to the electric field line at any place coincides with the direction of the electric field there.

Each field line has a direction written on it with an arrow, just like gravitational field lines do. This direction indicates the direction of the electric field at all places along the field line. The density of the field lines represents the relative field strength.

Electric field is a vector quantity, hence a vector arrow can be used to depict it. The length of the arrows at any particular position is inversely proportional to the strength of the electric field there, and they all point in that direction.

To know more about electric field lines visit:-

https://brainly.com/question/14438235

#SPJ4

Answer:

the first one is Interphase

the second one is prophase

the third one is metaphase

the fourth one is Anaphase

the last one is Telophase

According to the professor's research, both handwritten notes and computer-based notes qualify as independent variables.

The professor's study considers handwritten notes and computer-based notes to be independent variables. These other qualities will be examined to see if they change depending on note-taking technique, including better memory and exam recall.

What kinds of variables are the groupings for taking notes?

Because they are being examined for their potential to influence other factors, the note-taking groups that use handwritten and computerised notes are regarded as independent variables.

Better exam memory and recall are those other variables, and their changes in response to note-taking methodology will be investigated.

To know more about independent variables, visit:

https://brainly.com/question/28871343

#SPJ1

Answer:

In the equation IQ (MA/CA) X 100, the MA stands for mental age. Intelligence quotient (IQ) is a measure of cognitive ability that is often calculated using the ratio of an individual's mental age to their chronological age, multiplied by 100. In this equation, MA refers to the individual's mental age, which is their level of cognitive development as measured by an intelligence test. CA refers to their chronological age, which is their actual age in years. The ratio of these two values is used to calculate their IQ score.

Answer:

22,583.5 J

Explanation:

KE = 1/2mv²

KE = 1/2(47 kg)(31.0 m/s)² = 22,583.5 J

[tex]p = \frac{w}{t} [/tex]

[tex]w = fdcosθ [/tex]

where p is power

w is work done

t is time in seconds

f is force

d is distance

f=600N

d=10

t=12

w=600 X 10

w=6000 Nm

p=6000/12

p=500 watts

Important Formulas:

[tex]w=Fd[/tex]

[tex]p=\dfrac{w}{t}[/tex]

work(measured in joules) = force(measured in newtons) * distance(measured in meters)

power(measured in watts) = work(measured in joules) / time(measured in seconds)

__________________________________________________________

Given:

[tex]F=600N[/tex]

[tex]d=10m[/tex]

[tex]t=12s[/tex]

[tex]p=?[/tex]

__________________________________________________________

Finding work:

[tex]w=Fd[/tex]

[tex]w=600\times10[/tex]

[tex]w=6000J[/tex]

__________________________________________________________

Finding power:

[tex]p=\dfrac{w}{t}[/tex]

[tex]p=\dfrac{6000}{12}[/tex]

__________________________________________________________

[tex]\fbox{p = 500 watts}[/tex]

EMF is the Electromotive force. It is the electric potential difference which is produced by the cell or the surrounding magnetic field.

Electromotive force is also known as electromotance or EMF. It is an energy transfer to an electric circuit per unit of the electric charge of the cell or the magnetic field. It is measured in units of volts. Devices which are used to measure electromotive force is called electrical transducers which provide an EMF by converting other forms of energy in the cell into electrical energy.

Other electrical equipment which can also produce an electromotive force, such as the batteries, also convert chemical energy, and generators, the devices which convert mechanical energy. This energy conversion can be achieved through physical forces that are applied physical work on electric charges. However, the electromotive force itself is not a physical force, and for the current ISO/IEC standards that consider the term deprecated, favoring the names which source voltage or source tension instead.

Learn more about EMF here:

https://brainly.com/question/15121836

#SPJ1

The magnitude of the magnetic force acting on the bar , Fb is calculated to be = ILB.

Magnetic force is defined as attraction or repulsion that arises between electrically charged particles because of the motion.

Given length , L and negligible resistance

uniform magnetic field, B

a) To determine the magnitude of the magnetic force acting on the bar:

If rod slides down with constant velocity then total force is zero

X direction  Fb - NsinФ

= Fb = NsinФ

Y direction, mg - NcosФ

mg = NcosФ

Now, Fb/mg = sinФ / cosФ

Fb = mg tanФ

But: Fb = I L B sinФ

The magnitude of the magnetic force acting on the bar , Fb = ILB.

To know more about magnetic force, refer

https://brainly.com/question/2279150

#SPJ4

LUMINOSITY, distance, perceived brightness, surface temperature, -color or spectral type, MASS, -orbital period in binary system, -orbital distance in a binary system.

In physics, mass is a quantitative measure of inertia, a basic characteristic of all matter. It is essentially the resistance a body of matter gives to a change in its speed or location as a result of the application of a force.

A measurement of the volume of material that makes up or is contained within a physical body. Newton's laws of motion are based on classical mechanics, which relates an object's mass to the force needed to accelerate it and, consequently, to its inertia.

To know more about Mass visit:

https://brainly.com/question/28221042

#SPJ4

It refers to a quantity changed by the experimenter.

The independent variable is a variable that is manipulated or controlled by the experimenter in an experiment. It is the variable that is thought to affect the dependent variable, which is the variable being measured or observed in the experiment. The independent variable is plotted on the horizontal axis when graphed, and is often referred to as the predictor variable. The respondent variable is not a commonly used term in scientific research.

The statement "the speed of light is always the same no matter how fast you are moving" is true. This phenomenon is known as the constancy of the speed of light.

According to the theory of relativity, the speed of light in a vacuum is a constant value that is independent of the motion of the observer. This means that no matter how fast you are moving, you will always measure the speed of light to be the same value.

This idea may seem strange and counterintuitive, but it has been experimentally verified and is now a fundamental principle of modern physics. It has important consequences for our understanding of the nature of space and time, and it has played a key role in the development of many important scientific theories, including the theory of relativity.

To know more about relativity

https://brainly.com/question/29258869

#SPJ4

I2 = V / R2 = 0.678 A ; I3 = V / R3 = 0.678 A are the current flows in R2 and R3.

Here R1 = R2 = R3 = R4 = 4.43Ω

And E = 9.01 V

When we removed the bulb bearing Ru, the equivalent circuit now becomes as shown.

Now R2 and R3 are in parallel, so their equivalent resistance

 1/Rp = 1/R2 + 1/R3

 Rp = 2.215 Ω

Again, R1 is connected Rp in series so equivalent resistance

R = R1 + Rp = 6.645 Ω

Current through ‘R1’ is

 I1 = V / R = 9.01 / 6.645 = 1.356 A

Potential across R2 and R3 is

 V = E – I1R1 = 3.0033V

So current through R2

  I2 = V / R2 = 0.678 A

Current through R3

 I3 = V / R3 = 0.678 A

To learn more about Electrical Circuits:

https://brainly.com/question/2969220

#SPJ4

Answer:

a. The velocity of the ball, if it is caught at a height of 1.5 m, is [14.9, 19.7] m/s.

To find the velocity of the ball if it is caught at a height of 1.5 m, we can use the equation:

vf^2 = vi^2 + 2ad

Where vf is the final velocity, vi is the initial velocity, a is the acceleration due to gravity (-9.8 m/s^2), and d is the change in position.

Plugging in the values given in the question, we get:

vf^2 = 20^2 + 2*(-9.8 m/s^2)*(1.5 m)

Solving for vf, we get:

vf = [14.9, 19.7] m/s

b. If the ball is caught at a height of 1.5 m, the mechanical work required is 0 J.

To find the mechanical work required, we can use the equation:

work = force * displacement

Plugging in the values given in the question, we get:

work = 6.5 N * (1.5 m - 1.5 m)

Solving for work, we get:

work = 0 J

Therefore, if the ball is caught at a height of 1.5 m, the mechanical work required is 0 J.

The image distance is 0.65 cm and the image is real but diminished.

We know that for the diverging lens the light appears to be diverged from the source that it come in through. The focal length of the diverging lens is negative and the lens formula is used.

We have;

1/f = 1/u + 1/v

f = focal length

u = object distance

v = image distance

-1/2.5 = 1/4 + 1/v

1/v = 1/4 + 1/2.5

v = 0.25 + 0.4

v = 0.65 cm

The image is real but it is smaller than the object.

Learn more about image distance:https://brainly.com/question/12629638

#SPJ1

Answer: 13 m/s.

Explanation: To solve this problem, we need to use the equation for motion with constant acceleration:

d = v₀t + 1/2 at²

where d is the distance traveled, v₀ is the initial velocity, t is the time it takes to travel that distance, and a is the acceleration.

Since we know the distance the car travels (300 m), the final velocity of the car (30 m/s), and the acceleration of the car (0.75 m/s²), we can solve for the initial velocity. We just need to rearrange the equation to solve for v₀:

v₀ = (d - 1/2 at²) / t

In this case, we can plug in the known values to find the initial velocity:

v₀ = (300 - 1/2 * 0.75 * t²) / t

Since the final velocity of the car is 30 m/s and the acceleration is 0.75 m/s², we can use the equation for motion with constant acceleration to find the time it takes for the car to travel 300 m:

v = v₀ + at

30 = v₀ + 0.75t

Rearranging to solve for t, we get:

t = (30 - v₀) / 0.75

Substituting this value for t in the equation for the initial velocity, we get:

v₀ = (300 - 1/2 * 0.75 * ((30 - v₀) / 0.75)²) / ((30 - v₀) / 0.75)

This simplifies to:

v₀ = (300 - 1/2 * 0.75 * (900 - 2v₀) / 0.75) / (30 - v₀)

which simplifies further to:

v₀ = (300 - 675 + v₀) / (30 - v₀)

Solving for v₀, we get:

v₀ = -375 / -29

which simplifies to:

v₀ = 13 m/s

Therefore, the initial velocity of the car is 13 m/s.

If the power output of the engines is increased by 100% to 2P0, the airplane will be able to fly at a new speed of 1.26[tex]v_{0}[/tex].

As, P = F v

So, P = kv³

Then, v/v0 = [tex]\sqrt[3]{P/P0}[/tex].

Therefore, after substituting the values, the speed will be 1.26[tex]v_{0}[/tex].

What is power?

In physics, power is the amount of energy transferred or converted per unit of time. In the International System of Units, the unit of power is the watt, which is equivalent to 1 joule per second. In older works, force is sometimes called activity. Power is a scalar quantity.

Power is related to other quantities. For example, the power required to move a ground vehicle is the product of drag, wheel traction, and vehicle speed. The power of a motor is the product of the torque produced by the motor and the angular velocity of the output shaft. Similarly, the power dissipated in an electrical element of a circuit is the product of the current through the element and the voltage across the element.

If the power output of the engines is increased by 100% to 2P0, the airplane will be able to fly at a new speed of 1.26[tex]v_{0}[/tex].

As, P = F v

So, P = kv³

Then, v/v0 = [tex]\sqrt[3]{P/P0}[/tex].

Therefore, after substituting the values, the speed will be 1.26[tex]v_{0}[/tex].

To know more about power, visit:

https://brainly.com/question/1634438

#SPJ4

The ecosystem that is present in the northern hemisphere is Tindouf

Tindouf is the capital of Algeria's Tindouf province, a city close to the borders of Mauritania, Western Sahara, and Morocco which is located in the northern hemisphere. From the chromatogram drawn by Teresa Glass, we concluded that the city of Tindouf, Algeria is a desert biome with very low winter precipitation and high temperatures. This region is of strategic importance. It has an Algerian military base and airport, with regular flights to Algiers and other domestic destinations. Garet Djebilet's settlement is located in his Tindouf municipality near the border with Mauritania. The settlement has an iron mine and an abandoned airport, and is located about 70 kilometers northwest of Awinetbel his Egla.

Learn more about the northern hemisphere in

https://brainly.com/question/13661560

#SPJ4

The correct answer is option A). The force is directed toward the top of the page.

When an object with charge q is moving near a wire with current I, the object will experience a force due to the magnetic field generated by the current in the wire. The direction of this force is determined by the right-hand rule.

According to the right-hand rule, if you point your right thumb in the direction of the current and your fingers in the direction of the motion of the charged object, the force on the object will be in the direction your palm is facing.

Learn more about Force here:

https://brainly.com/question/388851

#SPJ4

To induce a counterclockwise current in the circular loop of wire, you can use Faraday's law of electromagnetic induction.

Faraday's law states that the induced electromotive force (emf) in a closed circuit is equal to the negative of the rate of change of the magnetic flux through the circuit.

In this case, the magnetic field is directed out of the paper and is uniform within the square region. As the loop of wire is positioned half in and half out of the square region, the magnetic flux through the loop will change as the loop moves or as the magnetic field strength changes. This change in magnetic flux will induce an emf in the loop, which will cause a current to flow in the wire.

The direction of the current will be determined by Lenz's law, which states that the induced current will be in the direction that opposes the change in magnetic flux. Since the magnetic field is directed out of the paper and the loop is moving counterclockwise, the induced current will flow counterclockwise.

Learn more about Faraday's law here:

https://brainly.com/question/17012638

#SPJ4

The title has the incorrect order for the variables.

The error in the graph is that the title has the incorrect order for the variables. Therefore, option D is correct.

Variables are factors or quantities that can change or be manipulated and have an effect on the outcome of an experiment or the behavior of a system. They are essential in scientific investigations as they allow researchers to study and understand the relationships and dependencies between different factors.

There are two types of variables and that are independent variables and dependent variables. They provide a systematic way to investigate cause-and-effect relationships and understand patterns.

Learn more about variables, here:

https://brainly.com/question/15078630

#SPJ6

The statement best describes Keisha's error is an object in either state of equilibrium must have no net force acting on it. The correct option is D.

When a system is in a state of dynamic equilibrium, the reversible reaction that is occurring in it no longer changes the ratio of reactants to products, but there is still the movement of substances between the reactants and products.

Because the thing will be moving, it won't be at rest. An object is considered to be static when it is at rest. The external forces that are acting on an object are what will make it move. When external forces are no longer acting on the object, it will travel up to that point.

Therefore, the correct option is D, An object in either state of equilibrium must have no net force acting on it.

To learn more about dynamic equilibrium, refer to the link:

https://brainly.com/question/27965641

#SPJ1

The question is incomplete. Your most probably complete question is given below:

Which statement best describes Keisha's error?

An object that is not moving is always in static equilibrium.

O An object that is moving must be in dynamic equilibrium.

An object in either state of equilibrium must have no forces acting on it.

An object in either state of equilibrium must have no net force acting on it.

(a) The gas moves from point a to point b in an isochoric process in which the volume stays constant.

The work done when the gas moves from point A to point B is Wab = PV = 0.

The labor involved in getting the gas to boil, Wbc = PV = 1.4. (9.3 - 5.9) L.atm = 4.76 1 L.atm is equal to 101.325 J.

Work completed, ∆W = 101.325 × 4.76 = 482.3 J

Therefore, the process' overall work was a, b, and c.

Wtotal = 0 plus 482.3 J = 482.3 J (Ans) (Ans)

(b) As previously stated, point C is where the gas temperature returns to its initial value.

As a result, in the process ac through b, the gas doesn't undergo any temperature change.

Tfinal = Tinitial

Therefore, internal energy change U = 0.

To know more about Constant volume visit:

https://brainly.in/question/49693981

#SPJ4

The value of the constant c is -17 m/s2.

To find the value of the constant c, you need to use the information given about the position of the particle and the force acting on it at time t = 3.0 s.

The position of the particle at time t = 3.0 s is given by x = 3.0 m + (4.0 m/s)t + ct2 - (2.0 m/s3)t3. Substituting t = 3.0 s into this equation gives:

x = 3.0 m + (4.0 m/s)(3.0 s) + c(3.0 s)2 - (2.0 m/s³)(3.0 s)3

= 3.0 m + 12.0 m + 9c - 54 m/s³

= 3.0 m + 12.0 m - 54 m/s³ + 9c

The force on the particle at time t = 3.0 s has a magnitude of 36 N and is in the negative direction of the x-axis. This means that the force is directed opposite to the direction of the positive x-axis. Since the force is proportional to the acceleration of the particle, the acceleration of the particle at time t = 3.0 s must also be in the negative direction of the x-axis.

The acceleration of the particle at time t = 3.0 s is given by the second derivative of the position with respect to time:

a = [tex]d^{2} \frac{x}{dt^{2} } = 2c[/tex]

Since the acceleration is in the negative direction of the x-axis, the value of c must be negative.

Substituting the value of the acceleration into the equation for the position of the particle at time t = 3.0 s gives:

x = 3.0 m + 12.0 m - 54 m/s³ + 9c

= 3.0 m + 12.0 m - 54 m/s³ - 9(-a/2)

= 3.0 m + 12.0 m - 54 m/s³ + 9a/2

= 3.0 m + 12.0 m - 54 m/s³ + 9(-36 N)/2

= 3.0 m + 12.0 m - 54 m/s³ - 162 N

= -147 m - 54 m/s³

Since the position of the particle at time t = 3.0 s is given as -147 m, the value of c must be:

c = (-147 m - 54 m/s³) / (9 s2)

= -17 m/s²

Therefore, the value of the constant c is -17 m/s².

Learn more about variable force from

https://brainly.com/question/29494558
#SPJ1

See full question below

A 2.0 kg particle moves along an x-axis, being propelled by a variable force directed along that x-axis. Its position is given by x = 3.0 m + (4.0 m/s)t + ct2 - (2.0 m/s3)t3, with x in meters and t in seconds. The factor c is a constant. At t = 3.0 s, the force on the particle has a magnitude of 36 N and is in the negative direction of the axis. What is c?