An object undergoing simple harmonic motion takes 0.15 s to travel from one point of zero velocity to the next such point. The distance between those points is 30 cm. (a) Calculate the period of the motion. s (b) Calculate the frequency of the motion. Hz (c) Calculate the amplitude of the motion. cm

Answers

Answer 1

Answer:

Explanation:

Point of zero velocity are extreme points situated on either side of equilibrium position .

a )

Time taken to travel between these two points is .15 s

time for half the oscillation = .15 s

Time for full one oscillation = .30 s .

Time period of oscillation = .30 s

b)

frequency = 1 / time period

= 1 / .30s = 3.33 oscillation per second.

c )

Distance between these two point is equal to two times amplitude

2 x amplitude = 30 cm

amplitude = 15 cm


Related Questions

Help me please it’s due right now review question help

Answers

Answer:

M.E = mgh

given, m=400g = 400/1000=0.4kg

h=1.75m

g=9.81m/s²

M.E =0.4×9.81×1.75

=6.867J

what is the stress in a steel wire that is 5m long and 0.04cm squared in cross section If the wire bears a load of 20kg?

Answers

Answer:

Explanation:

stress = ?

length =5 m

area of cross section = 0.04 cm or 0.0004m

force = 20 × 10 = 200 N ( w = mg) g = 10

formula : stress = force / cross-sectional area

stress = 200 / 0.0004

stress = 500,000 Nm^-2

One hazard of space travel is debris left by previous missions. There are several thousand objects orbiting Earth that are large enough to be detected by radar, but there are far greater numbers of very small objects, such as flakes of paint. The force exerted by a 0.100-mg chip of paint that strikes a spacecraft window at a relative speed of 4.00 x 103 m/s, given the collision lasts 6.00 x 10-8 s is Fill input: x 106 N.

Answers

Answer:

The correct answer is "6666.67 N".

Explanation:

The given values are:

Mass,

m = 0.100

Relative speed,

v = 4.00 x 10³

time,

t = 6.00 x 10⁻⁸

As we know,

⇒  [tex]F=m(\frac{\Delta v}{\Delta t} )[/tex]

On substituting the given values, we get

⇒      [tex]=0.100\times 10^{-6}(\frac{4\times 10^3}{6\times 10^{-8}} )[/tex]

⇒      [tex]=6666.67 \ N[/tex]

During the Dust Bowl in the 1930s, there were huge dust storms caused by drought and wind. Farm areas all across the Midwest were affected by erosion. Many farmers lost the crops on which they depended to make a living and support their families.
How can farmers prevent soil erosion on their farms? Choose the two that apply.

A. Leave roots in the soil after harvesting.
B. Plant trees around the fields to block wind.
C. Harvest all the crops on the farm at once.
D. Pull up the entire plant when they harvest crops.

Answers

A. Leave roots in the soil after harvesting
B. Plant trees around the fields to block wind

Fairly easy question I’ll give extra points help.

Answers

1. third law

2. first law

3. third law

4. second law

yup yup ! answer is above !!!

a constant force of magnitude F=45 N and making an angle of 30 to the horizontal is applied on a stationary block placed on the floor over a distance of 8 m. the work done by the force

Answers

The work done by the force on the block is approximately 311.2 Joules.

To calculate the work done by the constant force of magnitude F = 45 N over a distance of 8 m at an angle of 30 degrees to the horizontal, we need to find the component of the force that acts parallel to the displacement.

The horizontal component of the force can be calculated using trigonometry:

F_horizontal = F * cos(angle)

            = 45 N * cos(30 degrees)

            = 45 N * (√3 / 2)

            ≈ 38.9 N

Now, we can calculate the work done by the force using the equation:

Work = Force * Distance * cos(theta)

where theta is the angle between the force and the displacement.

Work = F_horizontal * Distance * cos(0)

     = 38.9 N * 8 m * cos(0)

     = 38.9 N * 8 m

     = 311.2 Joules

For such more questions on force

https://brainly.com/question/26553026

#SPJ8

Temperature is the measure of the average kinetic energy of the particles in an object. True False

Answers

Answer:

true

Explanation:

with increased temperature particles move faster as they gain kinetic energy

Which expenses do you think will change based on how much you drive

Answers

Increased driving can lead to higher vehicle maintenance and repair expenses, increased fuel costs, potential increases in auto insurance premiums, and additional parking fees, all of which should be considered when estimating the overall impact on your expenses.

The expenses that are likely to change based on how much you drive can be broadly categorized into two main areas: vehicle-related expenses and fuel-related expenses.

1. Vehicle-related expenses: The more you drive, the more wear and tear your vehicle will experience, leading to increased maintenance and repair costs. Regular oil changes, tire replacements, brake pad replacements, and other routine maintenance tasks will be required more frequently.

2. Fuel-related expenses: It's intuitive that the more you drive, the more fuel you'll consume, resulting in higher fuel expenses. Fuel prices can vary, but regardless of fluctuations, increased mileage will directly impact your fuel budget. Fuel-efficient vehicles may mitigate some of these costs, but the overall impact on your expenses will still be noticeable.

For more such questions on driving,click on

https://brainly.com/question/32438244

#SPJ8

Pls quickly brainliest to the first to anwser

Answers

Answer:

8m/s^2

Explanation:

hope it helps........

Explanation:

you're supposed to know the formula of acceleration which is velocity of a time then you can solve the question

6) Which of the following describes a good team member?
A) She is willing to compromise.
B) He is aggressive.
C) She is stubborn.
D) He is conceited.

Answers

A she is willing to compromise because she is okay with having to sacrifice what she wants to make it work

Answer: A

Explanation:

Because someone who is aggressive, stubborn, or proud of theirselves are more likely to think they're above everyone else and be a bully. However someone who is willing to compromise is better since you can generally make everyone happy that way

HOPE THIS HELPS ^^

why entrepreneurs should not be a wild risk taker?​

Answers

Explanation:

Entrepreneurs are not wild risk takers but are instead calculating risk takers. They appear to be risk takers because they see the market differently than the rest of us do. 3. ... Entrepreneurs tend to be optimistic about their chances for success, and usually their optimism is based in reality.

A carnival ride starts at rest and is accelerated from an initial angle of zero to a final angle of 6.3 rad by a rad counterclockwise angular acceleration of 2.0 s2 What is the angular velocity at 6.3 rad?​

Answers

The final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

Final angular velocity of the carnival ride

The final angular velocity of the carnival ride is determined by applying third kinematic equation as shown below;

ωf = ωi + 2αθ

where;

ωf  is the final angular velocity of the carnival ride = ?ωi is the initial angular velocity of the carnival ride = 0α is the angular acceleration = 2.0 rad/s²θ is the angular displacement of the carnival ride = 6.3 rad

ωf = 0 + 2(2.0) x 6.3

ωf = 25.2 rad/s

Thus, the final angular velocity of the carnival ride at a displacement of 6.3 rad is 25.2 rad/s.

Learn more about angular velocity here: https://brainly.com/question/6860269

Answer: 5.0 rad/s

Explanation: Because that’s what khan said so try it out.

Your eyes form upside-down images, which are then flipped right-side-up by our brains.


True
False

Answers

Answer:

I believe it is true, but our brains don’t do it, I think it is the lenses in our eyes that do it. I might be wrong tho

Explanation:

Answer:

Yes it is true that our eyes form upside-down images, which are flipped right-side-up by our brain.

If a current of 1.10 A flows through a 7.00 Ω resistor of length 3.00 m, what is the electric field strength inside the resistor?

Answers

Answer:

the electric field strength inside the resistor is 2.57 V/m

Explanation:

Given;

current flowing through the wire, I = 1.10 A

resistance of the wire, R = 7.00 Ω

length of the wire, L = 3.00 m

The emf created inside the resistor is calculated as;

V = IR

V = 1.10 x 7

V = 7.7 V

The electric field strength inside the resistor is calculated as;

E = V/L

E = 7.7 / 3

E = 2.57 V/m

Therefore, the electric field strength inside the resistor is 2.57 V/m

please help me !
1. Suppose that the temperature drops 25 degrees overnight. When you get into your car the next morning, your low tire pressure light comes on. Explain, in terms of the ideal gas law, why this happened (assume air is an ideal gas). (10 points)

Answers

Answer:

The drop in temperature overnight causes a decrease in the average kinetic energy of the air molecules inside the tires. According to the ideal gas law, this leads to a decrease in tire pressure. The low tire pressure light in vehicles is triggered when the pressure falls below a certain threshold, alerting the driver to check and adjust the tire pressure.

Explanation:

The ideal gas law, represented by the equation PV = nRT, relates the pressure (P), volume (V), number of moles (n), and temperature (T) of an ideal gas. In this case, we can analyze how the drop in temperature affects the tire pressure.

When the temperature drops, according to the ideal gas law, the pressure of a gas will decrease if the volume and the number of moles remain constant. This is because the decrease in temperature causes a decrease in the average kinetic energy of the gas particles, leading to less frequent and less forceful collisions with the tire walls, resulting in a decrease in pressure.

In the context of the tire pressure, the air inside the tires behaves as an ideal gas. When the temperature drops overnight, the air inside the tires also cools down, causing a decrease in its temperature. As a result, the average kinetic energy of the air molecules decreases, leading to a decrease in pressure inside the tires.

The low tire pressure light comes on as a result of this drop in pressure. The tire pressure monitoring system in modern vehicles is designed to detect significant deviations from the recommended tire pressure. When the pressure drops below a certain threshold, typically due to temperature changes or a puncture, the light is triggered to alert the driver to check and adjust the tire pressure.

Therefore, the drop in temperature overnight causes a decrease in the average kinetic energy of the air molecules inside the tires, resulting in a decrease in tire pressure, which triggers the low tire pressure warning light.

Hope this helps!

A bird is flying directly toward a stationary bird-watcher and emits a frequency of 1490 Hz. The bird-watcher, however, hears a frequency of 1505 Hz. What is the speed of the bird, expressed as a percentage of the speed of sound

Answers

Answer:

The speed of the bird is 1.00% of the speed of sound.

Explanation:

The speed of the bird can be found by using the Doppler equation:

[tex] f = f_{0}(\frac{v - v_{r}}{v - v_{s}}) [/tex]

Where:

v: is the speed of sound = 343 m/s

f₀: is the frequency emitted = 1490 Hz

f: is the frequency observed = 1505 Hz

[tex]v_{r}[/tex]: is the speed of the receiver = 0 (it is stationary)

[tex]v_{s}[/tex]: is the speed of the source =?

The minus sign of [tex]v_{s}[/tex] is because the source is moving towards the receiver.

By solving the above equation for [tex]v_{s}[/tex] we have:

[tex] v_{s} = v - \frac{f_{0}*v}{f} = 343 - \frac{1490*343}{1505} = 3.42 m/s [/tex]

The above speed in terms of the speed of sound is:

[tex]\% v_{s} = \frac{3.42}{343}\times 100 = 1.00 \%[/tex]

Therefore, the speed of the bird is 1.00% of the speed of sound.  

I hope it helps you!

A 6.47 micro-coloumb particle moves through a region of space where an electric field of magnitude 1300 N/C points in the positive x direction, and a magnetic field of magnitude 1.33 T points in the positive z direction. If the net force acting on the particle is 6.27E^-3 N in the positive x direction>

Required:
Calculate the magnitude of the particle's velocity. Assume the particle's velocity is in the xy plane.

Answers

Answer:

v = 248.8 m/s

Explanation:

Given that,

Charge, q = [tex]6.47\ \mu C[/tex]

Electric field, E = 1300 N/C

Magnetic field, B =1.33 T

The force acting on the particle, [tex]F=6.27\times 10^{-3}\ N[/tex]

We need to find the magnitude of the particle's velocity. The net force on the particle is given by :

[tex]F=qE+qvB\\\\6.27\times 10^{-3}=6.47\times 10^{-6}\times 1300+6.47\times 10^{-6}\times 1.33v\\\\6.27\times 10^{-3}-6.47\times 10^{-6}\times 1300=6.47\times 10^{-6}\times 1.33v\\\\-0.002141=6.47\times 10^{-6}\times 1.33v\\\\v=\dfrac{0.002141}{6.47\times 10^{-6}\times 1.33}\\\\v=248.8\ m/s[/tex]

So, the magnitude of the particle's velocity is 248.8 m/s.

You are watching a s Saturday morning cartoon concerning a jungle hero called George of the Jungle. George attempts to save a friend, an ape named Ape, from a stampeding herd of wildebeests. Ape is at the base of a tall tree which has a vine attached to its top. George is in another tree holding the other end of the vine. George plans to swing down from the tree, grab Ape at the bottom of the swing, and continue up to safety on a ledge which is half of George's initial height in the tree. Assuming that Ape weights the same as George, will they successfully make it to the top of the ledge? If you believe they do, how high a ledge could they make it to? If you disagree, suggest what could be done for George to save Ape.​

Answers

Answer:

I don't think so because if Ape was the same weight as george I don't

think he can hold him but maybe so let's say he could hold his own ape then Yes I think he could make it to the ledge Now I think they could make it to the ledge which was half the size.

Sorry if this sounded weird English is my 2nd language Oh and if this helped please give brainiest thank you <3

Help please. Question about a potential energy.

Answers

P=m*g*h. So this implies that 130*10*0.200=260J. Bear in mind that g is constant.

a disk of a radius 50 cm rotates at a constant rate of 100 rpm. what distance in meters will a point on the outside rim travel during 30 seconds of rotation?​

Answers

50π m ≈ 157 m
Explanation:
100 rev/min (2π rad/rev) / (60 sec/min) = 3⅓π rad/s
d = ωrt = 3⅓π(0.50)(30) = 50π m ≈ 157 m

Calculate the terminal velocity of
the following nain drops faning
through air (a) one with a diameter
of 0.3cm 6 one with a a diameter
of o. Olm. Take the density of
water to be looo Kym3 and the
eis cosity of air to be ixlos pas.
The buoyancy effect of the air
may be ignored)​

Answers

I’m pretty sure it’s a

Which device converts electric energy into mechanical energy?
O A. An electromagnet
O B. A motor
O C. A transformer
O D. A generator

Answers

Answer:

B motor

Explanation:

Batteries are not perfect. They can't deliver infinite current. As the current load on a battery gets larger, the voltage output gets smaller.

a. True
b. False

Answers

True Im typing this for charater limit

a train has an initial velocity of 30 m/s. If the train accelerates uniformly at a rate of 6.3 m/s ^ for 2.8 seconds what is the trains final velocity?

Answers

T

Answer:

the velocity is a second final to initial velocity of 39

answer asap!!! i suck at acceleration

Answers

Answer: 2.67

Explanation: it said he went from 0 to 8 in 3 seconds so if we divide eight By three we get 2.67 rounded to the nearest hundredth so you accelerated that 2.67 m/s

The water pressure to an apartment is increased by the water company. The water enters the apartment through an entrance valve at the front of the apartment. Where will the increase in the static water pressure be greatest when no water is flowing in the system

Answers

Answer:

Option C

Explanation:

Options for the question are as follows -

A. At a faucet close to entrance valve

B. At a faucet away from the entrance valve

C. It will be the same at all faucets

D. There will be no increase in the pressure at the faucets

Solution -

The static force will be the same at all faucets and also the area of the faucets be same.

Thus, the pressure created at all faucets will be the same.

Thus, option C is correct

When you cool a gas, how does this affect the de Broglie wavelength of the gas atoms? When you cool a gas, how does this affect the de Broglie wavelength of the gas atoms? Being cooled, the gas atoms slow down so that their de Broglie wavelength will increase. Being cooled, the gas atoms slow down so that their de Broglie wavelength will decrease. The de Broglie wavelength will remain the same because it does not depend on temperature.

Answers

Answer:

The de Broglie wavelength will remain the same because it does not depend on temperature.

Explanation:

de Broglie wavelength of a particle is independent of the temperature and hence the properties of emitted particle such as photoelectric effect, radioactive radiation etc. does not depend on the temperature.

Also, until unless the kinetic energy of a moving particle is not driven by the

thermal energy, the de Broglie wavelength  is independent of the temperature


In an application, Germanium is
made p-type material by adding
Indium. The rate of adding is one
indium atom
per
3 Germanium
atom. Assume donor density to be
zero and ni = 6.2 Cubic
metre at room temperature.
Determine the value
of
the
aceeptor atom density​

Answers

Answer:

produce electronics

Explanation:

The uses of Germanium are recorded beneath: Germanium's principle use is to deliver strong state hardware, semiconductors and fiber optic frameworks. As a phosphor in fluorescent lights.

A hand dryer blows heated air downwards out of the exit duct at a velocity of 4 m/s. The temperature and density of the ambient air at the inlet are 15 C and 1.23 kg/m3, while at the outlet it has temperature 35 C and density 1.15 kg/m3 The blower power is 10.0 W and the heater power is 715 W. Consider the inlet to be at the large mass of ambient air which has negligible velocity.
a) What is the pressure at the outlet? 4 m/s, 35 C
b) You will be applying the energy equation. Why can you ignore any height differences in this situation?
c) If the specific heat of air C-1000 J/(kg K), where Δυ-C Δ T, find the change in internal energy per unit mass from the inlet to outlet.
d) Find the mass flow rate through the dryer.
e) What is the power loss in the system?
f) What is the loss in the system?
g) What is the head loss in the system?
h) What is the total loss coefficient of the system, referred to the outlet velocity?
i) If there were no heater, would the temperature of gas at the outlet be higher, the same, or lower than the inlet? Explain why.

Answers

Answer:

nzkdjdksishdjsdjjdjnzkskejeoueeuieeoyrie ryrhdhcksodopdncndnszdkhfoeosheiwuef wokxkzdkjdoeehxjbxbdkeiehdhdhddjjddjdhhdhdhhhjdhfjdjjfjddhdheudiwiehdbejwowud

Explanation:

isos

what is the velocity of the object 2.3 seconds after it is released from the top of the empire state building?

Answers

Explanation:

Object is under the effect of the acceleration of gravity

v = 1/2 a t^2       a = 9.81 m/s^2   t = 2.3

v = 25.9 m/s^2 = ~ 26 m/s   ( two significant digits)

Other Questions
a 200 g mass is placed on the meter stick 20 cm from the fulcrum. a 170 g mass is used to balance the system. how far will it have to be located from the fulcrum to keep the system in balance? Deon feeds his Great Dane 62 cups of dog food per week. He has a new bag with 160 cups of dog food. Deon will pick up more dog food at the pet store in 2 12weeks. Will the new bag of food last until then? Show your work. how to create column percentages to test whether or not your research hypothesis can be supported. What was the role of African Americans in the political system in the late nineteenth century? Which of the following are conjugate acid/base pairs? Select all that apply.a. NaCl and NaOHb. HCl and Cl-c. H2SO4 and SO42-d. H3PO4and H2PO4-e. H2CO3 and CO32 Question 12Find the volume of this cone. Round to the nearest hundredth.9 ft8 ftcm cubed Whats the area?? Theres a picture Combine the like terms to create an equivalent expression.and please only use the signs what I gave you in the screen shot thank you A copper plate is free to swing between the poles of a large electromagnet. When the field is turned up the plate Group of answer choices will swing faster. will not be affected at all. will brake and quickly come to rest. will swing with a larger amplitude, because it is pushed by the magnet. will become a permanent magnet. Today is 15 May 2022. Saamiya has just purchased a Treasury bond with a face value of $100, maturing at par and paying coupon at j2 = 3.4% p.a. The purchase price was $100.065. The maturity date of this bond is 15 May 2024. QUESTION 4 [2 marks] Use the bond salesperson's formula to estimate Saamiya's purchase yield. Give your answer in j2 form, rounded to three decimal places. a. 1.683% p.a. b. 1.809% p.a. c. 2.999% p.a. d. 3.366% p.a. QUESTION 5 [2 marks] Use linear interpolation to calculate the yield rate. Give your answer in j2 form, rounded to three decimal places. Hint: 1.65% per half year and 1.9% per half year are the lower bound and the upper bound for the linear interpolation. a. 1.683% p.a. b. 3.201% p.a. c. 3.366% p.a. d. 3.550% p.a. QUESTION 6 [2 marks] Which of the following statements is incorrect? a. The duration of this Treasury bond will be higher if its coupon rate is higher. b. We can use the duration of this Treasury bond to measure its price sensitivity. c. The duration of this Treasury bond will increase if the yield rate at purchase is lower. d. The purchase price of this Treasury bond will decrease, if this Treasury bond is subject to a 30% tax on both interest and capital gains. three ways to advertise for AVID 27 Skipped eBook Lexi Company budgets unit sales of 1,190,000 in April, 1,280,000 in May, 270,000 in June, and 1,660,000 in July. Beginning inventory on April 1 is 238,000 units, and the company wants Controversy surrounded U.S. relations with Mexico in the 1990s and continues to this day.Which issue is central to this controversy?Oraised tariffsO conflicting alliancesO climate controlillegal immigration The manager of a medium-sized business was heard to remark: "My business is one which involves too many uncertainties for a budget to be of any use to me Required: Discuss any FOUR (4) benefits of preparing budgets for an organisation. (12 marks) Question 3 (Part B) Best Athletics Ltd, which develops and runs athletics training programs for primary schools, has budgeted revenue for the first 6 months of 2022 as follows: Month January Budgeted revenue $10 000 An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 27 C, and 750 kJ/kg of heat is transferred to the air during the constant-volume heat-addition process. Taking into account the variation of specific heats with temperature, determine (a) the pressure and temperature at the end of the heataddition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle. Approximate answers: (a) 4000 kPa, 1500 K: (b) 400 kJ/kg; (c) 50 percent; (d) 500 kPa. Find the equation for the plane through Po(-5, -4,3) perpendicular to the following line. x= -5+t, y= - 4+ 3t, Z= -5t, - 00 The diameter of a circle is 2 feet. What is the circle's area? Question 1 of 16 4 points Save Answ Kingdom Corporation has the following: - Preferred stock, $10 par value, 7%, 50,000 shares issued $500,000 Common stock, $15 par value, 300,000 shares issued and ou labor groups represent ________ of the total number of interest groups registered to lobby in washington. For the solved question below, I am still unclear on how the PV Factor is figured out. What is the PV Factor formula?