The conclusion is supported by these results is binding of oxygen to the protein changes the protein's tertiary structure to a conformation that resists the effects of urea.
Simple definition of fluorescenceFluorescence is a property that some chemicals have that allows them to emit visible light after absorbing radiation that is typically invisible, like ultraviolet light.
Fluorescence is the name given to the process of electromagnetic radiation typically visible light emitting from a material as a result of atoms being excited. These excited atoms almost immediately (within 10⁻⁸ seconds) begin emitting again. In most cases, the initial excitation is brought on by the energy absorption of incident radiation or particles, like X-rays or electrons.
To know more about fluorescence visit:
https://brainly.com/question/24228588
#SPJ4
Which isotope, when bombarded with nitrogen-15, yields the artificial isotope dubnium-260 plus 4 neutrons
The isotope that when bombarded with nitrogen-15 yields the artificial isotope dubnium-260 plus 4 neutrons is californium-249.
Californium-249 is a heavy element and when bombarded with nitrogen-15, which is a light element, undergoes a nuclear reaction known as a "cold" fusion reaction. This reaction results in the formation of the artificial isotope dubnium-260, which has a higher atomic number than the starting element and the release of 4 neutrons.This process is known as a Nuclear Transmutation, which is a process in which one element is converted into another element by bombarding it with a beam of particles such as protons, neutrons, or other ions.
learn more about isotope here:
https://brainly.com/question/11394246
#SPJ4
Why do we use an excess of aldehyde in the aldol-dehydration reaction? O to form an enolate anion O to insure that the double aldol-dehydration takes place O to react with the free radicals
O to prevent air-oxidation
Option B, Using an excess of aldehyde in the aldol-dehydration reaction is done primarily to ensure complete conversion of the reactants to the desired product.
An excess of aldehyde is used to ensure that there is a sufficient concentration of the aldehyde present in order to form the enolate anion, which is the reactive intermediate in the aldol-dehydration reaction. To achieve high yield: Using an excess of aldehyde allows for the formation of multiple enolate anions, which increases the chances of a double aldol-dehydration reaction taking place, resulting in the formation of the desired product. Using an excess of aldehyde helps aldol-dehydration to prevent this by reducing the exposure of the aldehyde to air.
Learn more about aldol-dehydration here:
https://brainly.com/question/23798009
#SPJ4
How many cm is meter stick?
100 cm is meter stick.
Centimeter is denoted by the (cm). It is a metric unit of the measurement which is used for measuring the length of an object.
Meterstick is a foldable ruler which is used to measure the length, and it is common in the construction industry. They are made up of wood or plastic and often they have a plastic or metal joints so that they can be folded together.
A meter measuring stick, which is one meter (39.37 inches) long, it contains 100 centimeters. Thus, centimeter is equal to one-hundredth of a meter. The word centimeter comes from the late 18th-century. The word centimeter derived from the Latin root "centum"/ means "hundred" and the Greek root "metron", meaning "measure".
To know more about length here
https://brainly.com/question/30100801
#SPJ4
Methanol (methyl alcohol or wood alcohol) is a potential automotive fuel, either in pure form or mixed with gasoline. Some fleet vehicles, such as municipal buses, have been modified to burn methanol-containing fuels. These fuels are also used by some race cars. A particular automobile modified to use a mixture of 85.0% methanol and 15.0% gasoline by mass gets 25.5 mi/gal. The fuel has a density of 0.775 g/mL. How many kilograms of methanol does the automobile consume in a trip of 808 km
Answer:
it’s 4
Explanation:
I need to know the Lewis structure for
CCI4
H2O
O2
N2
PH3
Please and thank you.
Two solitary sigma bonds are visible in the Lewis structure between the hydrogen and oxygen atoms.
What is Lewis structure explain with example?The octet rule is a theory that describes how atoms share electrons so that each atom has eight electrons in its outer shell. This idea is the foundation of a Lewis structure. An oxygen atom, as an illustration, has six electrons in its outer shell.
The entire molecule's electron density is concentrated only around the core C in the CCl4 Lewis structure. Two nitrogen atoms are connected by a triple bond in the N2 Lewis structure.
In the reaction described above, PH3 is acting as a Lewis base because of the single electron on the P atom.
A double bond exists between two oxygen atoms in the Lewis structure of O2. Oxygen atoms must form two bonds in order to comply with the octet rule. The oxygen (red) and hydrogen (white) atoms are held together by powerful connections known as covalent bonds.
To learn more about Lewis structure refer to:
https://brainly.com/question/20300458
#SPJ1
Which component of the periodic table is needed to determine why KCl tastes like NaCl? A. Group B. Period C. Atomic Weight D. Atomic Number
Atomic Number of the periodic table is needed to determine why KCl tastes like NaCl.
What is the Periodic Table?
The Periodic Table is a tabular arrangement of the chemical elements organized by atomic number, electron configuration, and recurring chemical properties. It is one of the most important tools in chemistry, providing a useful framework to classify, systematize, and predict the properties of elements.
Atomic numbers are used to identify each element in the periodic table, and they are also used to determine the number of protons in the nucleus of an atom. The number of protons in an atom determines its chemical properties, and the similarity in the number of protons between two elements can explain why they have similar properties. In this case, the similarity in the atomic number of potassium (K, atomic number 19) and sodium (Na, atomic number 11) explains why the salts of both elements, potassium chloride (KCl) and sodium chloride (NaCl), taste the same.
Hence, Option D is correct.
To know more about the Periodic Table,
https://brainly.com/question/15987580
#SPJ4
How many grams of magnesium
sulfate (MgSO4) are dissolved in
0. 965 L of a 0. 0575 M solution?
Molar Mass Mg: 24. 30 g/mol
Molar Mass S: 32. 06 g/mol
Molar Mass O: 16. 00 g/mol
Magnesium sulfate, or MgSO₄, weighs 6.68 g, and dissolves about 0. 965 L of the a 0. 0575 M solutions.
For what use in chemistry?A solution is created when a solvent and a solute, two different compounds, are mixed together. When a salt and a solvents is mixed, a solution is created. Commonly, one substance will dissolve in another to create a solution, such as when salt dissolves in water. Nevertheless, a solution can be produced under any state of matter.
Molar mass MgSO₄ = 120.36 g/mol
You have a 0.0575 M solution
That is equal to 6.9207 g/L or 0.0575 mol/L * 120.36 g/mol.
But you want mass in 0.965 L
Mass equals 0.965 L times 6.9207 g/L, or 6.68 g.
To know more about Solution visit:
https://brainly.com/question/25326161
#SPJ4
Which sample of matter has the lowest average kinetic
energy?
O 50. g at -55°C and 2.0 atm
O 50. g at 273 K and 4.0 atm
O 50. g at 33°C and 3.0 atm
O 50. g at 367 K and 1.0 atm
The given sample of matter has the lowest average kinetic energy is 50g at -55°C and 2.0 atm option - A is correct answer.
What exactly is kinetic energy?The force an object experiences as a result of motion is known as kinetic energy. An object can only accelerate if a force is applied to it. We have to put in the effort to use force. Once the work is done, energy is transferred to the object, which then moves at a new, constant speed.
Kinetic energy, which can be seen in the motion of an object or subatomic particle, is the energy of motion.
The average kinetic energy is the subject of the query. Thus, the only connection is to temperature. Kinetic energy increases with increasing temperature and decreases with decreasing temperature.
To know more kinetic energy visit:
https://brainly.com/question/494520
#SPJ1
suppose scientist have found three oxide materials that could potentially be used as a cathode to a magnesium or sodium anode in a battery for electrons plan an investigation to determine the best battery what characteristics did you test for
The sodium is the anode of the cell while the magnesium is the cathode of the cell.
How would the investigation go?We know that in the cell, we are going to have just about two electrodes in the cell and we would have the cathode and the anode. We have to know that the cathode is the point by which the current would enter the cell and the cathode is the point from which the current would leave the cell.
Having said this, we should know that the investigation would have to take into account the reduction potentials of the magnesium as well as that of the sodium as these can be used in the construction of the cell that is under study here.
Hence, by consideration of the electrode potentials, we can see that the sodium would have to act as the anode of the cell and we would keep up with the magnesium as the cathode of the cell.
Learn more about cathode:https://brainly.com/question/4052514
#SPJ1
Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory
>120°
109.5°
120°
<120°
>109.5°
90°
< 109.5°
180°
Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory is 109.5°.
Germanium tetrachloride has an odd, acidic smell and is a colorless, fuming liquid. It is a necessary step in the creation of pure germanium metal. GeCl4 has seen a significant rise in utilization recently as a result of its employment as a reagent in the creation of fiber optics. GeO2 (germanium dioxide) may be immediately converted into germanium tetrachloride by dissolving the oxide in strong hydrochloric acid. To purify and remove the germanium tetrachloride from other products and contaminants, the resultant liquid is fractionally distilled. Rehydrolyzing the GeCl4 with deionized water will yield pure GeO2, which may then be reduced with hydrogen to get germanium metal.
complete question:Predict the ideal bond angles in GeCl4 using the molecular shape given by the VSEPR theory
109.5°
90°
120°
180°
< 109.5°
>109.5°
<120°
>120°
learn more about Germanium Refer:brainly.com/question/23745589
#SPJ4
mendeleev is given the most credit for the concept of a periodic table of the elements because:
Mendeleev is given the most credit for the concept of a periodic table of the elements because he emphasized its usefulness in predicting the existence and properties of unknown elements.
What is Periodic table?This is referred to as a tabular arrangement of the chemical elements by increasing atomic number which displays the elements so that one may see trends in their properties.
It consists of a rows and columns arrangement of the chemical elements and each they are grouped according ti the similar features which are present in the elements.
Mendeleev was the scientist who was given the most credit for the concept of a periodic table of the elements despite others working on it previously as a result of his emphasis in its usefulness in predicting the existence and properties of unknown elements.
Read more about Periodic table here https://brainly.com/question/1173237
#SPJ1
What are the things to consider before using hot and cold compress?
Answer:
Explanation:
There are several things to consider before using hot and cold compresses:
The condition being treated: Different conditions may require the use of hot or cold compresses. For example, hot compresses may be used to alleviate muscle pain, while cold compresses may be used to reduce swelling and inflammation.
The individual's sensitivity to temperature: Some people may be more sensitive to temperature changes and may need to use a compress that is not as hot or cold.
The duration of use: It is generally recommended to use hot compresses for no more than 20 minutes at a time, and cold compresses for no more than 15 minutes.
The potential for burns or frostbite: Hot compresses should not be used on skin that is broken or damaged, as they can cause burns. Cold compresses should not be applied directly to the skin for an extended period of time, as they can cause frostbite.
The individual's overall health: Individuals with certain medical conditions, such as circulation problems, should be careful when using hot and cold compresses and should consult with a healthcare professional before doing so.
The decrease in entropy (the DS value is negative) observed for alkene addition reactions results from:
Give a succinct description of how the various alkene reactants were combined to create the same result. The most stable intermediate carbocation will arise as a result of an electrophilic proton addition in the reaction between HCl and both alkenes.
The observed product is produced in both cases by adding Cl- to the tertiary carbocation that is produced. By figuring out the physical properties of the reactants and products, negative entropy in chemical processes may also be calculated. Gas molecules are widely spaced apart and move randomly in all directions, which results in high entropy in gases. Being a liquid converting into a solid, water freezing into ice is an entropy-reducing process. Due to the molecules' reduced freedom of movement, a solid has less chaos. A negative entropy reaction occurs when hydrogen and oxygen combine to generate water.
To learn more about carbocation please click on below link
https://brainly.com/question/13164680
#SPJ4
Classify the following alcohols as primary secondary and tertiary alcohols
Following is the list of primary secondary and tertiary alcohols.
Alcohols are chemical compounds made composed of an alkyl or aryl group and a hydroxyl group (ROH). A fundamental alcohol is a hydroxyl carbon with just one R group. If it contains two R groups, it is a secondary alcohol, and if it has three R groups, it is a tertiary alcohol.
Look at the carbon bonded to OH to identify whether an alcohol is primary, secondary, or tertiary. The alcohol is primary, secondary, or tertiary depending on how many other carbons are connected to that carbon. It is methanol if there are three hydrogens and no carbons, which is a rare combination.
For the given formulas, following are different types of alcohols -
a) Primary Alcohols
b) Tertiary Alcohol
c) Secondary Alcohol
d) Primary Alcohol
e) Primary Alcohol
f) secondary Alcohol
To learn more about primary secondary and tertiary alcohols from given link
https://brainly.com/question/28108673
#SPJ1
Thermal energy always moves from _ _ _ _ to _ _ _ energy.
Fill in the blanks.
Thermal energy always moves from higher energy area to lower energy area over a temperature gradient.
What is thermal energy?Thermal energy is a form of energy by virtue of temperature of a body. As the temperature of a body increase its thermal energy increases. Thermal energy or heat energy transfers though medium and vacuum from higher energy area to lower energy area.
Heat transfer can be through conduction in solids, convection in fluids and by radiation through space. In conduction, the thermal energy easily transfers through a chain of close packed molecules.
In all these mode of heat transfer heat energy is flowing from a hotter region to a colder region.
Find more on thermal energy:
https://brainly.com/question/18989562
#SPJ1
Using the graph complete the table for points A, B, and C.  complete the row of point D
A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature
What is Gay- Lussac's Law?A gas law known as Gay-law Lussac's asserts that a gas's pressure (when kept at a constant volume and mass) varies directly with its absolute temperature. In other words, while the mass is fixed and the volume is constant, the pressure a gas exerts is proportional to the temperature of the gas.
In the year 1808, French scientist Joseph Gay-Lussac created this law. Gay-law Lussac's can be expressed mathematically as follows:
P ∝ T ; P/T = k
Where:
P is the pressure that the gas is applying.
T is the gas's actual temperature, while k is a fixed value.
Example of Gay-Lussac lawThe tire pressure of a car increases after driving. This is due to the air inside the tires heating up as a result of friction (a contact force) between the tires and the road. Gay-Law Lussac's states that because the air cannot expand because the tires are effectively fixed-volume containers, the pressure rises.
To know more about Gay-Lussac's law refer to:
https://brainly.com/question/2683502
#SPJ1
The theoretical yield of a reaction is 5.00 moles of potassium permanganate (KMnO4) . If the reaction actually produces 616.2 g KMnO4 , what is the percent yield of the reaction
The theoretical yield of a reaction is 5.00 moles of potassium permanganate . If the reaction actually produces 616.2 g KMnO₄ , the percent yield of the reaction is 78 %.
given that :
the theoretical yield of the reaction = 5 mol
mass of the potassium permanganate = 616.2 g
molar mass of the potassium permanganate = 158 g /mol
moles of the KMnO₄ = mass / molar mass
= 616.2 / 158
= 3.9 moles
the percent yield = ( experimental yield / theoretical yield ) × 100 %
= ( 3.9 / 5 ) ×100 %
= 78 %
To learn more about percent yield here
https://brainly.com/question/14380568
#SPJ4
33.0 g of Ni represents how many atoms?
1.99 x 10²⁵ atoms
0.562 atoms
3.39x 10²³ atoms
5.48 x 10^-23 atoms
3.22 x 10^-21 atoms
What happens to the energy put into the ice maker? (What is it used to do? How
is it transformed or transferred?)
Answer:
When ice or any other solid melts, its potential energy increases. Indeed, this is the only increase in energy, since the thermal kinetic energy, or temperature, does not increase while melting. Potential energy is the latent energy that could be released by the water, and this increases because the water will release heat energy if it is frozen solid again.
Ice is the lowest energy state of water at normal Earth pressures. At each phase change of water, whether ice to liquid water or liquid water to water vapor, the potential energy decreases. This is due to the Law of Conservation of Energy. Materials undergoing a change of state absorb or release heat energy, but their temperatures do not change. This is because, while the state change is occurring, all the heat energy is converted into the potential energy of the new state of matter.
Water, in particular, has a very large change in potential energy during phase changes. It takes a great deal of energy to change water from one state to another. This is because of the strong hydrogen bonds that form between water molecules. The liquid phase allows water molecules to be in contact with each other, while the solid phase puts water molecules in an overall optimal configuration relative to each other.
Explanation:
Steel is an alloy containing Fe atoms and C atoms. Which of the following diagrams best represents the particle-level structure of steel ?
the diagram that best represents the particle-level structure of steel as alloy is option (b).
Alloy, often known as an alloy, is a metallic material made up of two or more elements. Even though carbon, a nonmetal, is a crucial component of steel, the constituents of alloys are typically themselves metals.
Typically, melting the mixture of materials produces alloys. Early civilizations recognized the usefulness of alloys; brass (copper and zinc) and bronze (copper and tin) were particularly significant.
Steel is an alloy of iron and carbon. carbon range is upto 2 percent in the mixture.
In steel iron atoms are larger than carbon.
Learn more about alloy
brainly.com/question/3718729
#SPJ4
Why the properties of elements are repeated after 2 8 18 and 32 elements?
The properties of the elements are repeated after 2 8 18 and 32 elements because these are the maximum number of the electrons that the four shells contains.
The electronic configuration of the elements in the periodic table are repeated because the maximum number of the electrons that the four shells can have are 2 8 18 and 32. the name of the four shells are K , L, M, N. The electronic configuration of the elements are repeated and due to this the properties of the elements are repeated.
Thus, the properties of the elements are increases because the electronic configuration are repeated in the periodic table.
To learn more about periodic table here
https://brainly.com/question/11155928
#SPJ4
How many grams is 0.5 moles?
0.5 moles of carbon weigh 6.0055 grams.
One of the chemical elements is carbon. The letter C stands for carbon, and the letter g stands for grams. As a result, 0.5 moles of carbon per gram is equivalent to 0.5 moles of carbon per gram, 0.5 moles of carbon per gram, and 0.5 moles of C per gram.
Carbon has a 12.011 atomic mass. Thus, one mole of carbon has a mass of 12.011 grams (12.011 g/mol). We multiply 0.5 moles of carbon by 12.011 to get grams, and vice versa.
no. of Grams = Moles of Carbon x 12.011
=0.5 × 12.011 = 6.0055
0.5 moles of carbon equal 6.0055 grams.
To learn more about moles click here
https://brainly.com/question/15356425
#SPJ4
The complete question is
How many grams is 0.5 moles of carbon
The IUPAC name for dimethyl ketone is ) 2-propanal. B) 3-propanal. C) 2-propanone. D) 1-propanone. E) acetone
The IUPAC name for dimethyl ketone is (C) 2-propanone
The prefix "di-" indicates two methyl groups (CH3) is attached to the parent compound, which is a ketone. The parent compound is also known as propanone.
It is a clear, colorless liquid that is commonly used as a solvent and in the production of various chemicals and materials. It is also known as acetone. It is used as a solvent, as a starting material in the synthesis of other compounds, and as an intermediate in the production of certain polymers.
Utilized to create compounds such as plastic, fiber, medicines, and other substances. Other compounds can also be dissolved with it. It is a byproduct of the breakdown of human fat and is found naturally in plants, trees, volcanic gases, forest fires, and other organisms.
Learn more about 2-propanone here: https://brainly.com/question/29167289
#SPJ4
river system smallest to largest
As stated, the Tributary, River, and River system are in order of largest to smallest.
What is the short definition of a river?A river is a part of the ocean that resembles a ribbon and flows downward under the influence of gravity. A river may be both large and deep or it may be only shallow enough to wade over. A stream, watercourse, or brook is a streaming water source that is lower than a river.
What is a river metaphor?The river flows through the landscape like a silver ribbon. The fast flowing river plunders everything in its path. The river is a seal that is attempting to return toward the tidal ways. A grizzly bear is the river, leaping to get its prey.
To know more about River visit:
https://brainly.com/question/17083829
#SPJ1
The complete question is-
Place the following in order from smallest to largest.
River, River system, Tributary.
Heat conservation is important for polar endotherms, thus they tend to be _________ so that they __________ their surface area to volume
Polar endotherms must save heat, hence they usually have a significant surface area to volume ratio. The capacity to maintain blood is what makes heat conservation unique.
Vasoconstriction keeps it in the centre by decreasing blood flow to the outside (also known as peripheral vasoconstriction). An endotherm is an organism that uses heat produced by its internal biological processes rather than nearly exclusively relying on ambient heat to keep its body at a metabolically advantageous temperature. In thermodynamics, heat is defined as a kind of energy that crosses a thermodynamic system's boundary due to a temperature differential across the barrier. Heat is not present in a thermodynamic system.
Learn more about heat here
https://brainly.com/question/28302909
#SPJ4
The freezing of methane is an exothermic change. What best describes the temperature conditions that are likely to make this a spontaneous change
The correct answer is option C: Low temperature only, because entropy decreases during freezing.
When a substance changes from a gas to a solid, the entropy (measure of disorder) of the system decreases. This is because the solid has a more ordered structure than the gas. The decrease in entropy is accompanied by a decrease in temperature and an increase in enthalpy (heat content).For a process to be spontaneous, the entropy change must be positive, so the freezing of methane is spontaneous only if the temperature of the surroundings is lower than the temperature of the methane. Thus, the heat released from the exothermic process will be absorbed by the surroundings, the temperature of the methane will decrease, and the entropy of the system increases, driving the process towards completion.
Learn more about entropy here:
https://brainly.com/question/15025401
#SPJ4
The complete question is :
Methane freezing is an exothermic process. Which of the following best describes the temperature conditions that are most likely to cause this spontaneous change? Because entropy increases during freezing, any temperature. Because entropy decreases during freezing, any temperature. Only at low temperatures because entropy decreases during freezing. Only at high temperatures, as entropy
6.0 mol Al reacts with 4.0 mol O2 to
form Al2O3.
4AI + 302 → 2Al2O3
How many moles of Al2O3 form when
4.0 mol O2 reacts?
[?] mol Al2O3
Mole measure the number of elementary entities of a given substance that are present in a given sample. Therefore, 2.66 mole of Al[tex]_2[/tex]O[tex]_3[/tex] form when 4.0 mol O[tex]_2[/tex] reacts.
What is mole?The SI unit of amount of substance in chemistry is mole. The mole is used to measure the quantity or amount of substance. We know one mole of any element contains 6.022×10²³ atoms which is also called Avogadro number. The stoichiometry represents the number of moles.
4AI + 3O[tex]_2[/tex]→ 2Al[tex]_2[/tex]O[tex]_3[/tex]
moles of Al =6.0 mol
moles of O[tex]_2[/tex]=4.0 mol
Since oxygen is limiting reagent
moles of Al[tex]_2[/tex]O[tex]_3[/tex]=2/3×4.0
=2.66 mole
Therefore, 2.66 mole of Al[tex]_2[/tex]O[tex]_3[/tex] form when 4.0 mol O[tex]_2[/tex] reacts.
To know more about mole, here:
https://brainly.com/question/15209553
#SPJ1
Please help!
Given the following reaction,
3H2SO4(aq)+Ca3(PO4)2(s)⟶3CaSO4(s)+2H3PO4(aq)
If 1.25x10^5 kg of H2S)4 react, how many kilograms of H3PO4 are produced?
Thank you!
Answer:
8.3 × 10⁴kg
Explanation:
Solution in the diagram
C3H8 + 3O2 → 3CO2 + 4H2
How many moles of oxygen are necessary to react completely with 7.2 moles of hydrogen?
(round to the tenth's place)
Taking into account the reaction stoichiometry, a amount of 5.4 moles of oxygen are necessary to react completely with 7.2 moles of hydrogen.
Reaction stoichiometryIn first place, the balanced reaction is:
C₃H₈ + 3 O₂ → 3 CO₂ + 4 H₂
By reaction stoichiometry, the following amounts of moles of each compound participate in the reaction:
C₃H₈: 1 mole O₂: 3 molesCO₂: 3 moles H₂: 4 molesMass of O₂ requiredThe following rule of three is used: If by reaction stoichiometry 4 moles of H₂ are produced by 3 moles of O₂, 7.2 moles of H₂ are produced by how many moles of O₂?
moles of O₂= (7.2 moles of H₂×3 moles of O₂)÷ 4 moles of H₂
moles of O₂= 5.4 moles
Finally, 5.4 moles of oxygen are required.
Learn more about the reaction stoichiometry:
brainly.com/question/24741074
brainly.com/question/24653699
#SPJ1
An 80.0-gram sample of water at 10.00C absorbs 1680 Joules of heat energy. What is the final temperature of the water
108°C is the final temperature of the water after absorption of 1680 Joules of heat energy.
What is temperature?Temperature is a physical quantity used to measure the average kinetic energy of molecules in matter. This is measured with a thermometer or other device that measures the average kinetic energy of the molecules within the substance. The terms Celsius (°C), Fahrenheit (°F), or Kelvin are commonly used to describe temperature (K). Temperature can affect the physical state of matter.
By rearranging the equation gives:
ΔT = q/mc
Plugging in the given values,
ΔT = 1680/ (80.0 g × 4.184 J/g·C)
= 98°C.
Since the initial temperature was 10°C, the final temperature is:
ΔT = T₂ - T₁
98°C = T₂ - 10
T₂ = 108°C
To learn more about Temperature
https://brainly.com/question/25384702
#SPJ4