ASAP Dr. Rollins is both an anthropologist and archeologist. While excavating some ruins in South America, he discovered a scale drawing of a replica of a Mayan pyramid.
-The scale for the drawing to the replica was 1 inch : 2 feet.
- The scale for the replica to the actual pyramid was 1 foot : 14 feet.

If the height of the pyramid on the drawing was 3 1/2 inches, what was the height of the actual pyramid?

A. 98 feet
B. 49 feet
C. 91 feet
D. 196 feet

Answers

Answer 1

The height of the actual pyramid is 98 feet.

How to determine the height of the actual pyramid?

To determine the height of the actual pyramid, we need to use both scales and convert the measurements.

First, let's convert the height of the drawing to the height of the replica,

1 inch : 2 feet (scale for drawing to replica)

[tex]3 \frac{1}{2} \: inches[/tex] = 7 feet (height of the replica)

Next, let's convert the height of the replica to the height of the actual pyramid:

1 foot : 14 feet (scale for replica to actual)

7 feet = 7 x 14 = 98 feet (height of the actual pyramid)

Therefore, the height of the actual pyramid is 98 feet, so the answer is A) 98 feet.

Learn more about pyramid here,

https://brainly.com/question/218706

#SPJ1


Related Questions

The top and bottom margins of a poster are 6 cm and the side margins are each 8 cm. If the area of printed material on the poster is fixed at 380 square centimeters, find the dimensions of the poster with the smallest area.

Width =

Height =

Answers

Let's denote the width of the printed material on the poster as "x" cm and the height as "y" cm.

According to the given information, the top and bottom margins are each 6 cm, and the side margins are each 8 cm. This means that the actual width of the entire poster, including the margins, is "x + 2(8)" cm, and the actual height, including the margins, is "y + 2(6)" cm.

Given that the area of the printed material on the poster is fixed at 380 square centimeters, we can set up the following equation:

Actual Area of Poster = Area of Printed Material on Poster

(x + 2(8))(y + 2(6)) = 380

(x + 16)(y + 12) = 380

To find the dimensions of the poster with the smallest area, we need to minimize the product (x + 16)(y + 12).

Since the given area of the printed material on the poster is fixed at 380 square centimeters, the actual area of the entire poster, including the margins, will be minimized when (x + 16)(y + 12) is minimized.

To minimize the product (x + 16)(y + 12), we need to minimize both x + 16 and y + 12, as they are both positive quantities.

Since x and y represent the width and height of the printed material on the poster, respectively, the smallest possible values for x + 16 and y + 12 would be 0, which means x = -16 and y = -12. However, since width and height cannot be negative, we need to find the next best option.

The smallest possible values for x + 16 and y + 12 that are greater than or equal to 0 would be when x = 0 and y = 0. This means that the width of the printed material on the poster should be 0 cm and the height should be 0 cm, which would make the dimensions of the poster with the smallest area:

Width = 0 cm

Height = 0 cm

However, please note that this would mean there is no printed material on the poster, as the width and height are both 0. If you want to have a non-zero width and height for the printed material on the poster, you would need to adjust the given area of the printed material on the poster accordingly.

figure B is a scaled copy of Figure A. What is the skill factor from Figure A to Figure B?

Answers

Answer:

1/4 = 0.25

Step-by-step explanation:

Scale Factor from Figure A  to Figure B = Figure B dimensions ÷ Figure A dimensions

Take any one side of Figure B and compare it with the corresponding side of Figure A and the ratio will give the scale factor. Since the figures are similar, the ratios of the other corresponding sides will be the same

Take horizontal top side of A which has a length of 4

The corresponding side of B has a length of 1

Therefore scale factor = 1/4 = 0.25

The other ratios are the same:
1.1/4.4 = 1.5/6 = 1/4 = 0.25

Find the square
(8m + 7)^2

Answers

Answer:

(8m + 7)^2 = 64m^2 + 112m + 49

(8m)^2 = 64m^2

2(8m)(7) = 112m

7^2 = 49

Expanding the expression (8m + 7)^2 using the square of a binomial formula, we get:

(8m + 7)^2 = (8m)^2 + 2(8m)(7) + 7^2
= 64m^2 + 112m + 49

Therefore, the answer is 64m^2 + 112m + 49.

4) Construct the truth tables for the following
(a) pV r

Answers

The truth tables for the logic expression is

p   q   p v q

F   F      F

F   T     T

T   F     T

T  T     T

Constructing the truth tables for the logic expression

From the question, we have the following parameters that can be used in our computation:

p v r

The expression is pronounced p or r

The rule of the truth table is

The expression is true if any of p or q is trueThe expression is false if both p and q are false

Using the above as a guide, we have the following truth tables

p   q   p v q

F   F      F

F   T     T

T   F     T

T  T     T

The above represents the truth tables for the logic expression

Read more about logic expression at

https://brainly.com/question/14458200

#SPJ1

6 The Montreal Biosphere is a geodesic dome that surrounds an environmental
museum in Montreal, Canada. The dome has a volume of 6,132,812.5 cubic feet.
The structure is 75% of a full sphere. What is the length of its diameter?

Answers

The geodesic dome has a diameter of 249.958 feet.

How to determine the diameter of the Montreal Biosphere

In this problem we must determine the diameter of a geodesic dome located in Montreal, Canada, (D), in feet. The volume of the geodesic dome (V), in cubic feet, is well described by this formula:

V = (3 / 4) · (π / 6) · D³

If we know that V = 6,132,812.5 ft³, then the diameter of the geodesic dome is:

6,132,812.5 = (3 / 4) · (π / 6) · D³

D³ = 15,617,078.79 ft³

D = 249.958 ft

The diameter of the geodesic dome is equal to 249.958 feet.

To learn more on volumes of spheres: https://brainly.com/question/9994313

#SPJ1

Adjacent angles. View the photo ccd

Answers

Answer: ∠DEA

Step-by-step explanation:

Starting Angle: ∠FBG

Adjacent (SAME) Angle: ∠DEA

DEA Is the correct answer
Other Questions
(T/F) Air entrainment is an admixture that is added to a concrete mix to decrease the shrinkage of the concrete. b) A rectangular table has length (3x+2) m and width 9m. If the area of the table is 153m square. Find the perimeter of the table (a) find the voltage drop in an extension cord having a 0.06 resistance and through which 4 a is flowing. If a device shows that a place has high humidity but there are not clouds in the sky you can say that is because a. the temperature is at its minimum b. the temperature is too cold c. the temperature is too warmd. the temperature is cooling off vinny the ceo of rainholm industries is looking to employ a ________ strategy, which would take advantage of economies of scale and location economies. He wishes to pursue and establish a global division of labor based on wherever best-of-class capabilities reside at the lowest possible cost for Rainholm Industries.A) global standardization B) multidomestic C) international D) transnational why would one conclude that high stream order in a valley network would be more characteristic of rainfall runoff than groundwater sapping? how many ffs are needed to make a register that counts from 0 to 255? You are given the following information for Golden Fleece Financial:- Long-term debt outstanding: $300,000- Current yield to maturity (r debt): 8%- Number of shares of common stock: 1 0,000- Price per share: $50 Book value per share: $25- Expected rate of return on stock (r equity): 1 5%Calculate Golden Fleece's company cost of capital. Ignore taxes. 4. Find the length of arc s.7 cm002 cm.5 cm According to Jonah, an hour saved at a non-bottleneck is Select one or more:a. something he strives to do when consulting.b. a mirage.c. difficult to accomplishd. a big deal. Does either of P = (4, 11, 25) or Q = (-1, 6, 16) lie on the path r = (1 + t, 2 + t^2, t^4)? Both points lie on the path of r(t). Point P lies on the path of r(t). Point Q lies on the path of r(t). Neither point lies on the path of r(t). Find a vector parametrization of line through P = (3, 7, 4) in the direction v = (7, -8, 4) r(t) = in urban development, wetlands have been drained to create land for development. this represents what part of hippo? 2. Using 3.14 as a value of n, find the approximate volume of each sphere below. Round tothe nearest cubic inch.a)4 inLikeexample 1b)12 in Al saves pennies he agreed to give 2/5 of his pennies to Bev if she would give 2/5 of what she got from Al to Carl and if Carl intern would give 2/5 of what he got from Bev to Danny Bev Carl and Danny agree and then he receives 48 pennies how many pennies did Al have initially Find two consecutive integers such that five times the first is equal to six times the second help someone need help on this question Question: N is a Geometric distribution with a mean of 2. a)Find the P [NT] for NNTT = 1, 2, 3, b)Find the E[NT] c)Find the Var (NT) d)Find the P[NM] ... Select two reasons why selfies became popular based on concepts from Passage 1.A. Australian influenceB. Peoples need to document their lives on social media.C. The love of photographyD. American youth and their interest in the latest technology.E. It became much easier to make a selfie due to advances in technology. F celebrities are the only reason selfies became popular complete the table to show the steps for combining like terms Question 19 of 50 > When cloning a foreign DNA fragment into a plasmid, it is often useful to insert the fragment at a site that interrupts a selectable marker (such as the tetracycline-resistance gene of PBR322). The loss of function of the interrupted gene can be used to identify clones containing recombinant plasmids with foreign DNA. With a yeast artificial chromosome (YAC) vector, a researcher can distinguish vectors that incorporate large foreign DNA fragments from those that do not, without interrupting gene function. How are the recombinant vectors in a YAC typically identified? The YAC vector contains a gene that confers antibiotic resistance: vectors containing foreign DNA will grow on a plate containing this antibiotic. The gene encoding P-galactosidase becomes inactive due to insertion of foreign DNA, so colonies grown on an ngar plate containing X-gal appear white instead of blue, The YAC vector contains a screenable marker that encodes for a protein that causes the cell to produce an easily identifiable fluorescent molecule. The two parts of a YAC vector contain two selectable markers that are not interrupted by the foreign DNA, and both must be present for the cell to survive on the selective medias Which of these is not a risk associated with GMO foods? Heavy government regulation will drive up the price of modified food crops for consumers. O Loss of genetic diversity in crops may make them more vulnerable to discase. Pests that we want to kill may becomeresistant to insect-killing Bt crystals in modified crops. Organisms that are not considered pests may inadvertently be killed by insect-resistant, genetically modified crops. There may be unknown costs that offset the apparent financial advantages of raising modified crops.