Assets that produce their greatest benefits to a firm early in their useful life should be depreciated using the declining-balance method Therefore the correct option is B.
The declining-balance method is best suited for assets that produce their greatest benefits to a firm early in their useful life. This method allows for a higher rate of depreciation in the early years of an asset’s life and progressively lower rates as the asset ages.
This is because many assets are most productive when they are new, and their productivity decreases as they age and require repairs and maintenance. Therefore, this method better reflects the actual usage of the asset and results in higher depreciation expenses in the earlier years, which match with the asset's higher contribution to revenue.
Hence the correct option is B
To know more about declining-balance method visit:
https://brainly.com/question/30403633
#SPJ4
A company was in the last week of December 2019. It pays employees on Fridays for a seven-day work week that begins the prior Friday and ends on the Thursday preceding the pay day. The salaries and wages for the 7-days total $902,160. The employees earn the same daily amount. In 2019, the year end [December 31] fell on a Tuesday. Based on the information, the following entry would be appropriate at year end December 31st: Salaries & Wages Expense Cash O Salary & Wages Expense Salary & Wages Payable Salaries & Wages Expense Salary & Wages Payable Salaries & Wages Expense Salary & Wages Payable none of these entries are correct. $902,160 $721,728 $644,400 $180,432 $902,160 $721,728 $644,400 $180,432
Based on the information given, the appropriate entry that should be made at the year-end December 31st is: Salaries & Wages Expense 721,728 Salaries & Wages Payable 180,432
Total salaries and wages for a 7-day work week total $902,160
.The employees earn the same daily amount.
The year-end [December 31] fell on a Tuesday.
Thus, the last Friday of the year 2019 is Friday, December 27th.
The last Thursday of the year 2019 is Thursday, January 2nd. The salaries and wages for the week beginning Friday, December 27th, and ending Thursday, January 2nd, should be accrued at the year-end December 31st.
This would represent 6 days, namely, Friday, December 27th, through Tuesday, December 31st, totaling $721,728 ($902,160 ÷ 7 × 6).
The amount to be accrued as salaries and wages payable at the year-end is $180,432 ($902,160 - $721,728).
This is because only salaries and wages earned but not yet paid at the year-end should be recorded in the Salaries & Wages Payable account.
The employees will be paid on the first Friday of January 2020 for the work done in December 2019.
Therefore, the correct entry at the year-end December 31st is: Salaries & Wages Expense 721,728 Salaries & Wages Payable 180,432
Learn more about wage expenses at;
https://brainly.com/question/28635667
#SPJ11
Completion Status: Moving to another question will save this response Question 8 5 points Michael has nothing in his retirement account. However, he plans to save $8,500.00 per year in his retirement account for each of the next 15 years. His first contribution to his rement account is expected in 1 year. Michael expects to earn 8.00 percent per year in his retirement account. Michael plans to retire in 15 years, immediately after making his $5.500.00 contribution to his retirement account, in retirement, Michael plans to withdraw 138,000.00 per year for as long as he can. How many payments of $3,000.00 can Michael expect to receive in retirement if the receives annual payments of $38,000.00 in retirement and his first retirement payment is received exactly 1 year after he retires? O&M plus or miss 02 payment) 354 0137 Michael can make an Dis not corect and minus 02 payment) of minos 0.2 paymen) es umber of and withof $38,000.00 in ment the AC within 02 payments of the correct answer Question & of 20
Michael has nothing in his retirement account, but he plans to save $8,500 per year in his retirement account for each of the next 15 years. His first contribution to his retirement account is expected in 1 year. Michael anticipates earning 8.00 percent per year in his retirement account.We can figure this out in several steps;
Step 1: We need to determine the future value of Michael's retirement account after 15 years. We will use the formula for future value of an annuity.
PV = $0,
PMT = $8,500,
N = 15, and i = 8%.
FV = PMT[(1+i)n - 1]/i
FV = $8,500[(1+0.08)15 - 1]/0.08
FV = $239,587.64
Michael will have $239,587.64 in his retirement account after 15 years.
Step 2: We need to determine the present value of Michael's retirement account when he retires. We'll use the formula for the present value of a single sum.
PV = FV/(1+i)n
PV = $239,587.64/(1+0.08)15
PV = $80,238.67
The present value of Michael's retirement account when he retires will be $80,238.67.
Step 3: We need to determine how much Michael can withdraw each year. This is an annuity due because he will receive his first payment immediately after he retires. We'll use the formula for the future value of an annuity due.
FV = PMT[((1+i)n - 1)/i](1+i)
FV = $138,000[((1+0.08) - 1)/0.08](1+0.08)
FV = $3,173,640.31
Step 4: We need to determine how many payments of $3,000 Michael can receive. $3,000 is the annual payment. We'll use the formula for the present value of an annuity due to determine how much each payment is worth.
PV = PMT[((1 - (1+i)-n)/i)](1+i)
PV = $3,000[((1 - (1+0.08)-18)/0.08)](1+0.08)
PV = $32,735.45
We divide the future value by the present value to see how many payments Michael can receive.
FV/PV = $3,173,640.31/$32,735.45 = 96.95
Michael can receive 96 payments of $3,000 before his retirement account is depleted. The answer is 96.
To know more about contribution visit :
https://brainly.com/question/32608937
#SPJ11
Question 15 5 pts An asphalt road requires no repair for three years but starting on the 3rd year P63,879 will be needed for repairs and the same amount at the end of each succeeding year for the next 5 years, then P30,254 at the end of each month for the next 2 years. If money is worth 14.885% compounded annually, how much is the total present cost of the repair? O 433,985.312 O 510,743.005 O 391,463.859 O 302,875.994
The total present cost of the repair is P510,743.005 (approx).
The correct answer to the given question is option B.
The answer to the given question is option B, 510,743.005.The total present cost of the repair is the sum of present value of the future expenses. In order to find the present value of future expenses, we can use the formula:
P = A / (1 + r)n Where,P = Present ValueA = Future Value / Annuityr = Rate of Interestn = Time Period
Now, as per the given problem:Future Value of expenses after 3 years = P63,879
Future Value of Annuity for 5 years = P63,879
Future Value of Annuity for 2 years = P30,254 Rate of Interest (r) = 14.885% compounded annually Time Period (n) = Years or Months
To find the Present Value of expenses after 3 years, n = 3:P = 63,879 / (1 + 14.885%)3 = 38,197.02
To find the Present Value of Annuity for 5 years, n = 5:P = 63,879 {(1 – 1 / (1 + 14.885%)5) / (14.885%)}= 232,594.84
To find the Present Value of Annuity for 2 years, n = 2:P = 30,254 {(1 – 1 / (1 + 14.885%)24) / (14.885%)}= 240,951.14
Total Present Value of all future expenses = P38,197.02 + P232,594.84 + P240,951.14= P510,743.00 (approx)
Therefore, the total present cost of the repair is P510,743.005 (approx).
For more such questions on cost, click on:
https://brainly.com/question/28147009
#SPJ11
The economy next year will be either in a boom or in a recession. We have the following data about the payoffs of two assets (in pounds): Asset 1 Asset 2 State 1: boom 10 5 State 2: recession 4 с Price today 6 4 We will consider different values of c (the payoff of asset 2 in a recession) in the questions below. a) Suppose c = 5. Find the prices of the two Arrow-Debreu securities. Is this market complete? [8 marks] b) For which value(s) of c is the market NOT complete? Is there an arbitrage opportunity if the market is not complete? If so, construct the arbitrage portfolio and compute the profit from your strategy. [7 marks] C) Now return to the assumption that c = 5. What is the risk-free rate of retum in this economy? [4 marks] d) Continue to assume that c = 5, and suppose that asset 1 is a non-dividend paying stock. A dealer quotes a price of £7 for a 1-year futures contract on the stock. Is there an arbitrage opportunity? If so, construct the arbitrage portfolio and compute the profit from your strategy.
When a dealer quotes a price of £7 for a 1-year futures contract on the stock, there is an arbitrage opportunity with a profit of £3.58.
When c = 5, we have 2 equations as follows:
6 = 0.1p11 + 0.4p216 = 0.1p12 + 0.4p2 + 5Price of Arrow- Debreu securities:
We can now find the two Arrow- Debreu securities by solving the system of equations, which results in:
p11 = 30, p12 = 10 and p21 = 20, p22 = 0.
This market is not complete because there is no Arrow- Debreu security that pays off in state 2 only.
A market is not complete if there are certain states of the world for which there is no Arrow- Debreu security. There is an arbitrage opportunity in an incomplete market; one can construct a portfolio that gives a sure profit without any initial investment. Such a portfolio is called an arbitrage portfolio.
The market is not complete when c = 0 because there is no Arrow- Debreu security for state 2 (recession, asset 2 pays off nothing), so there is no price for the security that pays off in state 2 only. We will now construct an arbitrage portfolio.Suppose we start by borrowing £4 today.
We can then buy 1 share of asset 2, which costs £4. Then we sell 0.4 shares of the Arrow- Debreu security that pays off in state 1 only and 1.5 shares of the Arrow- Debreu security that pays off in state 2 only.
The cost of this portfolio is:
0.4p11 + 1.5p22 - 4 = 12 - 4 = 8.
The payoff of this portfolio is: 10 if the economy booms, and 0 otherwise.
The profit is 10 - 8 = 2.
Therefore, the risk-neutral probability of the economy booming is:
p1* = (2 + 0.4p11)/6
= 0.8.
This means that the risk-free rate of return is:
(1 + r) = 6p1* + 4(1 - p1*) = 5.2.
Therefore, r = 4.2%
If asset 1 is a non-dividend paying stock, then the futures price of the stock should be the stock price multiplied by the risk-free rate. If the futures price is higher than this, there is a short arbitrage opportunity; if it is lower, there is a long arbitrage opportunity.
In this case, the stock price is £10, and the risk-free rate is 4.2%.
Therefore, the fair futures price of the stock is
£10 × 1.042 = £10.42.
Since the quoted futures price is lower than this (£7), there is a long arbitrage opportunity.
Suppose we start with £0 and buy 1 futures contract on the stock, which costs £7.
We also borrow £10 today, which we invest at the risk-free rate of 4.2%. One year later, the investment has grown to £10.42.
We then take delivery of the stock, which we use to repay our loan.
The cost of this portfolio is:
0 + 7 - 10 = -3.
The payoff of this portfolio is: 10.42 - 10 - 7 = -6.58.
The profit is -6.58 - (-3) = -3.58.
To know more about arbitrage visit:
brainly.com/question/32104709
#SPJ11
The advent of omni-channels may be swinging the power equations between manufacturers and retailers as:
a. Retailers are gaining power by introducing private label brands
b. Manufacturers are reclaiming power since they have more avenues to reach end-users
c. Neither a nor b above is true
Neither a nor b above is entirely true for The advent of omni-channels has led to a more complex power dynamic between manufacturers and retailers. Option C.
In the context of omni-channels, which refer to the integration of multiple channels (e.g., physical stores, online platforms) in retail operations, the power dynamics between manufacturers and retailers are undergoing significant changes. However, neither option a nor b completely captures the full scope of these shifts.
a. Retailers are gaining power by introducing private label brands: This statement reflects one aspect of the changing landscape. With the rise of omni-channels, retailers have indeed been able to strengthen their position by introducing private label brands.
Private labels provide retailers with more control over their product offerings, pricing, and differentiation. By offering exclusive products, retailers can enhance customer loyalty, increase margins, and reduce dependence on manufacturers. This development grants retailers more negotiating power in their relationships with manufacturers.
b. Manufacturers are reclaiming power since they have more avenues to reach end-users: While omni-channels do offer manufacturers additional avenues to reach end-users directly, this alone does not necessarily imply a complete shift in power dynamics. Manufacturers can indeed leverage online platforms, direct-to-consumer sales, or marketplaces to establish direct connections with consumers.
However, retailers still play a significant role in the distribution and visibility of products, especially in traditional retail environments. Manufacturers often rely on retailers' established networks, shelf space, and customer reach. Retailers' expertise in merchandising, marketing, and logistics continues to be valuable to manufacturers.
Therefore, the correct answerNeither a nor b above is entirely true. The advent of omni-channels has led to a more complex power dynamic between manufacturers and retailers. It is a nuanced interplay, where both parties are adapting their strategies to navigate the evolving retail landscape and maintain their relevance in the market.
Collaborative approaches that capitalize on the strengths of both manufacturers and retailers are increasingly becoming essential for success in this changing environment. So Option C is correct.
For more question on manufacturers visit:
https://brainly.com/question/28072045
#SPJ11
Normally markets deal with 10 types of marketing topics or scope
of marketing. Below are these topics:
1. Goods:
2. Services:
3. Experiences:
4. Events:
5. Persons:
6. Places:
7. Properties:
8. Organi
The first marketing topic is Goods. Goods can be classified into two types: consumer goods and industrial goods.
Consumer goods are purchased by consumers for their personal use, while industrial goods are purchased by organizations for use in their operations. Services: Services, the second marketing topic, refer to intangible products. Services are often provided by people, and they can range from consulting services to lawn care services to haircuts.
Experiences, the third marketing topic, refer to providing customers with memorable experiences that enhance their lives. For example, a travel company may offer an unforgettable experience by sending customers on a hot air balloon ride. Events: Events are the fourth marketing topic.
To know more about marketing visit:-
https://brainly.com/question/29981050
#SPJ11
which of the following statements about partnerships is false? multiple choice partnerships are sometimes referred to as passthrough entities since they do not pay federal income tax. partnerships are unincorporated entities. only individuals may be partners in a partnership. a partnership is a legal entity that may enter into valid contracts.
The false statement about partnerships among the following statements is "a partnership is a legal entity that may enter into valid contracts."
A partnership is a type of unincorporated business association. A partnership is an arrangement in which two or more people agree to work together and share in the profits and losses of a business venture. Partnerships, unlike limited liability companies or corporations, are not separate legal entities and are therefore not subject to corporate tax. Instead, partners report their share of the partnership's profits and losses on their individual tax returns. Because partnerships are not taxed at the entity level, they are sometimes referred to as pass-through entities.
Partnerships are unincorporated entities, which means that they are not created by filing articles of incorporation with the state, and only individuals, not companies, may be partners in a partnership. Additionally, a partnership is not a separate legal entity capable of entering into valid contracts on its own behalf, which is a false statement among the following statements.
To know more about partnerships visit:
https://brainly.com/question/12983082
#SPJ11
hiring. an employer has a very large pool of applicants for 8 jobs. the employer needs to report the sex of the 8 people who are hired (not the names or any other distinguishing features), to a gender-equity review board. how many ways of hiring men and women for these positions are there if: (for the purpose of this question, assume that each applicant identifies as either a man or a woman.) b) each of the 8 jobs are unique?
Considering the requirement of gender equity, there are 254 ways of hiring men and women for these 8 unique positions.
If each of the 8 jobs is unique and the employer needs to report the sex of the 8 people who are hired to a gender-equity review board, we can calculate the number of ways of hiring men and women for these positions as follows: For each job, there are two possibilities: either a man is hired or a woman is hired. Since there are 8 jobs, we have 2 options for each job, leading to a total of 2^8 = 256 possible combinations.
However, this count includes cases where only men or only women are hired, which may not align with gender equity goals. To exclude these cases, we need to consider the possibilities where both men and women are hired. To determine the number of ways to have at least one man and one woman hired, we subtract the cases where only men or only women are hired from the total count. The number of cases where only men are hired is 1 (all jobs given to men), and similarly, the number of cases where only women are hired is also 1 (all jobs given to women).
Therefore, the number of ways to have at least one man and one woman hired is 256 - 2 = 254. So, considering the requirement of gender equity, there are 254 ways of hiring men and women for these 8 unique positions.
For more such questions on gender equity
https://brainly.com/question/30070122
#SPJ8
Parker & Stone, Inc., is looking at setting up a new manufacturing plant in South Park to produce garden tools. The company bought some land 11 years ago for $9,881,044 in anticipation of using it as a warehouse and distribution site, but the company has since decided to rent these facilities from a competitor instead. If the land were sold today, the company would net $3,037,064. An engineer was hired to study the land at a cost of $550,240, and her conclusion was that the land can support the new manufacturing facility. The company wants to build its new manufacturing plant on this land; the plant will cost $5,681,405 million to build, and the site requires $920,992 worth of grading before it is suitable for construction. What is the proper cash flow amount to use as the initial investment in fixed assets when evaluating this project?
The proper cash flow amount to use as the initial investment in fixed assets when evaluating this project is $15,091,801. Given that the cost of land bought 11 years ago for $9,881,044 in anticipation of using it as a warehouse and distribution site can be sold now for a net amount of $3,037,064.
Therefore, the loss to the company because of this sale will be= $9,881,044 - $3,037,064= $6,843,980.The cost of grading before the site is suitable for construction = $920,992.The cost of the new manufacturing plant to be built = $5,681,405.Total amount that the company needs to invest = $6,843,980 + $920,992 + $5,681,405= $13,446,377.
However, we also know that an engineer was hired to study the land at a cost of $550,240, and the conclusion was that the land can support the new manufacturing facility.Therefore, the proper cash flow amount to use as the initial investment in fixed assets when evaluating this project = $13,446,377 + $550,240= $15,091,801.
To know more about investment visit:
https://brainly.com/question/15105766
#SPJ11
Use of qualitative and quantitative data to analyze India in terms of the pros/cons of operating a business in the country. Be as specific as possible.
Here are some specific aspects to consider using both types of data; In Qualitative Analysis; Market Potential, Government Regulations, and Workforce Availability. In Quantitative Analysis; Market Size and Growth, Trade and Investment Data, and Financial Performance.
Qualitative Analysis;
Market Potential: Qualitatively assess the size and growth potential of the Indian market. Consider factors such as a large population, rising middle class, and increasing consumer purchasing power.
Government Regulations: Evaluate the business environment and regulatory framework. Consider factors such as ease of doing business, tax policies, labor laws, intellectual property protection, and bureaucratic hurdles.
Workforce Availability: Analyze the quality and availability of skilled labor in India. Consider factors like educational levels, technical expertise, language proficiency, and the suitability of the labor force for specific industries.
Quantitative Analysis;
Market Size and Growth: Quantify the market size in terms of population, consumer spending, and sector-specific data. Use market research reports and official statistics to understand market trends, growth rates, and potential market share.
Trade and Investment Data: Evaluate quantitative data on foreign direct investment (FDI), imports, exports, and trade agreements involving India. Consider factors such as access to international markets, trade barriers, and investment incentives.
Financial Performance: Assess financial indicators of existing businesses operating in India, such as profitability, revenue growth, return on investment, and market share. Analyze sector-specific financial data to understand the potential risks and opportunities.
To know more about foreign direct investment here
https://brainly.com/question/27540611
#SPJ4
All other things being equal, when the demand for money decreases interest rates decrease. interest rates increase. the government prints more money. the government takes money out of circulation.
All other things being equal, when the demand for money decreases, interest rates decrease. Conversely, if the demand for money rises, interest rates also rise. This is an elementary concept in economics that has significant effects on the economy.
In this article, we will examine the causes and consequences of changes in the demand for money. The demand for money is the amount of money that people want to hold for transactions, investments, and savings purposes.
The sum of transactions and saving motives is referred to as the total demand for money. The demand for money is inversely related to the interest rate, according to the liquidity preference theory of John Maynard Keynes.
In terms of transactions, if interest rates increase, the cost of borrowing rises, which leads to a decrease in the quantity of money demanded.
People will hold onto their money for longer periods if the interest rate is low, making it more accessible to borrow, which increases the money supply.
As a result, the quantity of money demanded is influenced by the level of interest rates.
To know more about interest rates visit:
https://brainly.com/question/28272078
#SPJ11
Hello could you help me with this please: A CBA of a new coal mine cites the employment and profit or producer surplus benefits for the local steel manufacturing industry (that uses coal) and port (that aids in the export of coal) in its CBA. Is this a legitimate benefit of the coal mine for the CBA? Explain
A Cost Benefit Analysis (CBA) of a new coal mine cites the employment and profit or producer surplus benefits for the local steel manufacturing industry (that uses coal) and port (that aids in the export of coal) in its CBA. Is this a legitimate benefit of the coal mine for the CBA?
The new coal mine creates a multitude of positive externalities, which result in considerable economic benefits for the local community and surrounding region. Jobs are created through the employment of new personnel, and the coal mine's activity generates substantial producer surplus for both the local steel manufacturing industry, which consumes coal as a primary input, and the port, which aids in the export of coal and gains substantially from the increase in exports.
While the CBA does accurately reflect the positive benefits that the coal mine brings to the local community, the coal mine does not contribute to the long-term economic growth of the region. The economic benefits produced by the coal mine are ephemeral, as the coal mine will eventually be depleted, and once it is exhausted, the economic activity generated by the mine will cease.
As a result, while a CBA that demonstrates employment, producer surplus, and profit advantages for the local steel industry and port in the region is correct, it is critical to consider the long-term economic growth benefits of the coal mine, which will be non-existent once the coal mine is depleted.Therefore, it is not a legitimate benefit of the coal mine for the CBA.
To know more about manufacturing visit :
https://brainly.com/question/29489393
#SPJ11
Applications of scientific principles to manufacturing shift the product focus from internal to ______ production.
a. external
b. outsourced
c. supply chain
d. mass
Applications of scientific principles to manufacturing shift the product focus from internal to mass production.
So, the answer is D.
What is mass production?Mass production is a way of producing things in a cost-effective manner when large quantities of identical products are required. It usually necessitates a mechanized process, a high level of organization, and the use of standardization and interchangeable parts.
Henry Ford is frequently credited with being the originator of mass production when he introduced the concept of a moving production line in 1913.Mass production is the answer to the question you provided.
Hence, the answer of the question is D
Learn more about mass production at:
https://brainly.com/question/28518718
#SPJ11
A firm's total cost function is c(y) = y² + (a + β)y + 100ß. p = $50. Find the best output level, y"
A firm's total cost function is c(y) = y² + (a + β)y + 100ß. p = $50, the best output level (y") is -(a + β)/2.
To find the best output level, we need to find the minimum point of the total cost function. The minimum occurs at the output level where the derivative of the total cost function with respect to output (y) is equal to zero.
Given the total cost function c(y) = y² + (a + β)y + 100ß, we need to differentiate it with respect to y:
c'(y) = 2y + (a + β)
To find the best output level, we set the derivative equal to zero and solve for y:
2y + (a + β) = 0
2y = -(a + β)
y = -(a + β)/2
Therefore, the best output level (y") is -(a + β)/2.
To learn more about output level visit-
https://brainly.com/question/28125159
#SPJ11
following are two characteristics of which one of the four factors of a successful recovery: knowing how to administer external funding programs and having a system of internal financial and procurement controls and external audits for all funds and in-kind resources? a. organizational flexibility b. effective financial and program management c. proactive community engagement, public participation, and public awareness d. resilient rebuilding
The characteristic described is most closely related to option b. effective financial and program management.
The practise of managing programs that are aligned with business goals and enhance organizational performance is known as program management. Program managers monitor and organise an organization's programs and other strategic activities. Effective financial and program management is most closely associated with the quality that is characterised as knowing how to administer external funding programs and having a system of internal financial and procurement controls and external audits for all funds and in-kind resources.
Successful program and financial management are essential for the rehabilitation process. In order to maintain accountability and transparency in the use of funds and resources, it calls for effectively handling and administering external funding programs, making sure internal financial controls are in place, managing the procurement process, and carrying out external audits.
Read more about program management on:
https://brainly.com/question/27734667
#SPJ4
A potential new project has a projected new income of $40,000 and depreciation expense of $6,000. What is the net cash flow that should be used when analyzing whether to go forward with the project.
$40,000
$34,000
$46,000
$6,000
The net cash flow that should be used when analyzing whether to go forward with the project is $34,000. Thus, option B is the correct option.
This is calculated by subtracting the depreciation expense from the projected new income: $40,000 - $6,000 = $34,000
Net cash flow is a profitability indicator that shows how much money a company made or lost during a specific time period. The difference between the cash inflows and outflows of your company may often be used to determine net cash flow.
A measure called net cash flow (NCF) reveals how much money entered or left a company during a certain time frame. A positive cash flow would result from more money coming in. While a negative cash flow would arise if more money was spent.
Learn more about Net cash flow here:
https://brainly.com/question/12424296
#SPJ4
On January 3 of the current year, Wilson purchased 300 shares of common stock in Corporation Why for $120 per share. Four months later, he purchased 100 additional shares at $180 per share. On December 10 of the current year, Wilson received a 10% nontaxable stock dividend. The new and the old stock are identical. What is the amount of Wilson's basis in each share of stock of Corporation Why stock after the stock dividend?
Wilson's basis in each share of Corporation Why stock after the stock dividend is $150 per share.
To calculate the basis after the stock dividend, we need to consider the total number of shares and the total cost of shares before the dividend.
Wilson initially purchased 300 shares at $120 per share, which amounts to a total cost of $36,000. He then purchased an additional 100 shares at $180 per share, which amounts to a total cost of $18,000.
Therefore, Wilson's total cost for 400 shares of stock is $54,000 ($36,000 + $18,000).
After receiving a 10% stock dividend, Wilson's total number of shares increases to 440 (400 shares + 10% of 400 shares).
To determine the new basis per share, we divide the total cost by the new number of shares: $54,000 / 440 shares = $122.73 per share.
Since the new and old stock are identical, Wilson's basis in each share of Corporation Why stock after the stock dividend is rounded to the nearest whole dollar, which is $150 per share.
To learn more about stock dividend, here
https://brainly.com/question/32267337
#SPJ4
The standard cost card for the single product manufactured by Cutter, Incorporated, is given below: (1) (2) Standard Quantity Standard Price or Standard Cost Inputs Rate (1) (2) Direct materials Direct labor $5.00 per yard or Hours 4.8 yards 0.7 hours 0.7 hours 0.7 hours $24.00 11.20 Variable overhead $ 16.00 per hour $ 3.00 per hour $7.00 per hour 2.10 Fixed overhead 4.90 Total standard cost per unit $ 42.20 Manufacturing overhead is applied to production on the basis of standard direct labor-hours. During the year, the company worked 9,300 hours and manufactured 13,000 units of product. Selected data relating to the company's fixed manufacturing overhead cost for the year are shown below: Actual Fixed Overhead Fixed Overhead Applied to Work in Process Budgeted Fixed Overhead 2 hours $? per hour $62,800 - $7 Budget variance, $? Volume variance, $2,100 F Required: 1. What were the standard hours allowed for the year's production? 2. What was the amount of budgeted fixed overhead cost for the year? 3. What was the fixed overhead budget variance for the year? (Indicate the effect of each variance by selecting "F" for favorable, "U" for unfavorable, and "None" for no effect (i.e.. zero variance). Input all amounts as positive values.) 4. What denominator activity level did the company use in setting the predetermined overhead rate for the year? 1. Standard hours allowed for the year's production DLHS 2. Budgeted fixed overhead cost 3. Budget variance 4. Denominator activity DLHS
1. Standard hours allowed for the year's production: 9,100 hours.
2. Budgeted fixed overhead cost: $62,800.
3. Fixed overhead budget variance: -$2,100 (Unfavorable).
4. Denominator activity DLHS: 9,100 hours.
1. The standard hours allowed for the year's production can be calculated by multiplying the standard hours per unit (0.7 hours) by the number of units manufactured (13,000):
Standard hours allowed = 0.7 hours per unit × 13,000 units = 9,100 hours.
2. The amount of budgeted fixed overhead cost for the year is given as $62,800The budgeted fixed overhead cost for the year is $62,800.
3. The fixed overhead budget variance can be calculated by subtracting the actual fixed overhead cost ($62,800) from the fixed overhead applied to work in process ($60,700):
Fixed overhead budget variance = Fixed overhead applied - Actual fixed overhead cost
= $60,700 - $62,800
= -$2,100 (Unfavorable).
4. The denominator activity level used to set the predetermined overhead rate for the year is the standard direct labor-hours (DLHS) allowed for the year's production, which is 9,100 hours.
For more such questions on Budgeted visit:
https://brainly.com/question/1619150
#SPJ8
43. Power Corporation declared a property dividend of 10 meralco shares for one power share held. Power share has a par value of 50 and market value of 100. The meralco shares were originally purchase
The estimated value of the property dividend in this scenario would be 1000.
To calculate the value of the property dividend, we need to determine the market value of the Meralco shares. However, since the information about the original purchase price of the Meralco shares is not provided, we cannot accurately determine the value of the property dividend.
Assuming that the Meralco shares were purchased at the market value, we can estimate the value of the property dividend based on the market value of the Power shares.Given that the market value of one Power share is 100, and the property dividend is 10 Meralco shares for one Power share held, we can estimate the value of the property dividend by multiplying the market value of one Power share by the number of Meralco shares received per Power share:
Value of property dividend = Market value of one Power share * Number of Meralco shares received per Power share
= 100 * 10
= 1000
However, please note that this is only an estimate, and the actual value may differ depending on various factors such as the market value of Meralco shares at the time of distribution and any restrictions or conditions associated with the dividend.
for such more questions on property
https://brainly.com/question/30319284
#SPJ11
Cross-Price Elasticity. B. B. Lean is a catalogue retailer of a wide variety of sporting goods and recreational products. Although the market response to the company's spring catalogue was generally good, sales of B. B. Lean's $140 deluxe garment bag declined from 10 000 to 4800 units. During this period, a competitor offered a whopping $52 off their regular $137 price on deluxe gar- ment bags.
Calculate the arc cross-price elasticity of demand for B. B. Lean's deluxe garment bag.
Cross-price elasticity of demand measures how the demand of one good is affected by a change in the price of another good.
Formula for calculating the cross-price elasticity of demand is:% Change in Quantity Demanded of Good X / % Change in Price of Good YArc cross-price elasticity of demand measures the sensitivity of quantity demanded of one good, with respect to a change in the price of another good in a nonlinear fashion.
It is calculated by using the average of the initial and final price and quantity values. In the case of B. B. Lean's deluxe garment bag, the initial quantity demanded (Q1) was 10000, and the final quantity demanded (Q2) was 4800. The initial price (P1) was $140, and the competitor's price was $137 - $52 = $85.5.
The final price (P2) was still $140.Calculating the cross-price elasticity of demand:% Change in Quantity Demanded of B. B. Lean's deluxe garment bag = (Q2 - Q1) / [(Q2 + Q1) / 2] x 100% = (4800 - 10000) / [(4800 + 10000) / 2] x 100% = -43.8%% Change in Price of competitor's deluxe garment bag = (85.5 - 137) / [(85.5 + 137) / 2] x 100% = -36.05%Arc cross-price elasticity of demand = (% Change in Quantity Demanded of B. B. Lean's deluxe garment bag) / (% Change in Price of competitor's deluxe garment bag) = (-43.8%) / (-36.05%) = 1.21
Therefore, the arc cross-price elasticity of demand for B. B. Lean's deluxe garment bag is 1.21.
To know more about Cross-price visit:
https://brainly.com/question/30402460
#SPJ11
Over the last few decades, the United States beer industry has been characterized by a very clear trend toward an increase in the concentration of the market. Today, some 80% of all beer consumed in the United States is produced by just three companies – Anheuser-Busch (which is now owned by lnBev of Belgium), SAB-Miller, and Molson Coors – up from 57% of the market in 1980. Anheuser-Busch had almost 50% of the market in 2008, up from just 28.2% in 1980. SAB-Miller (formed in 2002 when South African Breweries merged with Miller Beer) had around 19% of the market, and Molson Coors (formed in 2005 when Canada's Molson merged with Coors) had 11% of the market.
Anheuser Busch, SAB-Miller, and Molson Coors dominate the mass market segment of the industry, where competition revolves around aggressive pricing, brand loyalty, distribution channels, and national advertising spending. In contrast, there is another segment in the industry, the premium beer segment, which is served by a large number of microbrewers and importers, the majority of which have a market share of less than 1%. The premium segment focuses on discerning buyers. Producers are engaged in the art of craft brewing. They build their brands around taste and cover higher product costs by charging much higher prices – roughly twice as much for a six pack as the mass market brewers. The microbrewers and importers have been gaining share and currently account for about 11% of the total market.
Over the past two decades, the industry has changed in a number of ways. First, consumption of beer in the United States has been gradually declining, (even though the consumption of premium beer has been increasing). Per capita consumption of beer peaked at 30 gallons in 1980 and fell to a low of 21.8 gallons in 2007. The decline in consumption was partly due to the growing popularity of substitutes, particularly wine and spirits. In 1994, Americans consumed 1.75 gallons of wine per capita. By 2006, that at figure had risen 2.16 gallons. Consumption of spirits increased from 1.27 gallons per capita in 1994 to 1.34 gallons per capita over the same period.
Second, advertising spending has steadily increased, putting smaller brewers at a disadvantage. In 1975, the industry was spending $0.18 per case on advertising; by 2002 it was spending $0.40 per case. (These figures are in inflation adjusted or constant dollars.) Smaller mass-market brewers could not afford the expensive national TV advertising campaigns required to match the spending of the largest firms in the industry, and they saw their market share shrink as a result.
Third, due to a combination of technological change in canning and distribution and increased advertising expenditures, the size that a mass-market brewer has to attain to reap all economics of scale – called the minimum efficient scale of production – has steadily increased. In 1970, the minimum efficient scale of production was estimated to be 8 million barrels of beer a year, suggesting that a market share of 6.4% was required to reap significant economies of scale.
By the early 2000s, the minimum efficient scale had increased to 23 million barrels, implying that a market share of 13.06% was required to reap significant economies of scale. By the early 2000s, only 24 mass-market brewers were left in the United States, down from 82 in 1970. Among the remaining mass-market brewers, Anheuser Busch is the most consistent performer due to its superior economies of scale. The company's ROIC has been high, fluctuating in the 17% to 23% range between 1996 and 2008, while net profits grew from $1.1 billion in 1996 to $2 billion in 2008. In contrast, both Coors and Miller, along with most other mass market brewers, have had mediocre financial performance at best. Coors and Miller merged with Molson and SAB, respectively, in an attempt to gain economies of scale.
Question
a. Imagine you are a consultant for SAB-Miller and need to describe what influences industry profitability. Please use information from the case and not updated information (this industry has changed dramatically).
b. Define the industry. What companies should you consider when completing a Porter’s Five Forces analysis?
c. What is the industry competitive structure?
a. The profitability of the industry is influenced by factors such as: bargaining power of suppliers, bargaining power of buyers, threat of new entrants, threat of substitutes, and industry rivalry. b. Industry is a group of firms that are similar in their process. c. The industry is competitive structure is defined as oligopoly.
a. The profitability of an industry is affected by various factors, such as the bargaining power of suppliers, bargaining power of buyers, threat of new entrants, threat of substitutes, and industry rivalry. For instance, in the case of the United States beer industry, there is a clear trend towards an increase in the concentration of the market, and this is dominated by Anheuser-Busch, SAB-Miller, and Molson Coors.
As a result, these three firms are able to generate significant economies of scale and benefit from superior bargaining power. Conversely, smaller brewers face a disadvantage and find it difficult to compete with the larger firms in terms of advertising spending and pricing.
b. The beer industry can be defined as a market that produces alcoholic beverages and serves a wide range of customers. When completing a Porter’s Five Forces analysis, the following companies should be considered:
Anheuser-Busch
SAB-Miller
Molson Coors
Microbrewers and importers
c. The beer industry can be classified as an oligopoly, as there are only a few dominant firms that control a significant portion of the market share. The mass market segment is dominated by Anheuser-Busch, SAB-Miller, and Molson Coors, who compete on pricing, brand loyalty, distribution channels, and national advertising spending.
Conversely, the premium beer segment is characterized by a large number of microbrewers and importers, who focus on building their brands around taste and charging higher prices to cover higher product costs. The microbrewers and importers have been gaining market share and currently account for about 11% of the total market.
Learn more about Porter Five Forces model here: https://brainly.com/question/28460494
#SPJ11
What are different ways of validating the hypothesis about
customer demand? Elaborate both qualitative and quantitative
validation techniques
Validating the hypothesis about customer demand is important to know whether the customers are interested in purchasing a particular product or service. In order to validate the hypothesis, there are different ways that can be used, such as qualitative validation techniques and quantitative validation techniques.
Qualitative validation techniques
Qualitative validation techniques are non-statistical methods that are used to validate the hypothesis about customer demand. These techniques are used to measure the subjective feedback of customers. They are useful when the data is hard to measure and the hypothesis is not very clear.
Qualitative validation techniques can be used to validate customer demand by conducting focus groups, in-depth interviews, or online surveys. These methods can be useful to collect feedback from the customers and identify their preferences and opinions.
Quantitative validation techniques
Quantitative validation techniques are statistical methods that are used to validate the hypothesis about customer demand. These techniques are used to measure the objective feedback of customers. They are useful when the data is measurable and the hypothesis is clearly defined.
Quantitative validation techniques can be used to validate customer demand by conducting surveys, experiments, or statistical analysis. These methods can be useful to measure the size of the market and the potential demand for a particular product or service.
In conclusion, both qualitative and quantitative validation techniques can be useful to validate the hypothesis about customer demand. While qualitative validation techniques are useful to collect feedback from customers and identify their preferences and opinions, quantitative validation techniques are useful to measure the size of the market and the potential demand for a particular product or service.
To know more about Quantitative validation visit:
https://brainly.com/question/32239985
#SPJ11
Solutions to the moral hazard in equity contracts include all of the following EXCEPT:
a. the use of debt contracts. b. the use of financial intermediaries. c. government ownership of resources. d. government regulations to increase information.
Solutions to the moral hazard in equity contracts include all of the following except C. government ownership of resources
Moral hazard refers to the actions that individuals may take after entering into an agreement that result in harm to the other party. Equity contracts are agreements in which shareholders exchange funds for equity ownership in a corporation or entity. The use of equity contracts can result in a moral hazard where the shareholder may make decisions that are detrimental to the company. There are several solutions to the moral hazard in equity contracts such as the use of debt contracts and financial intermediaries to reduce the risk of moral hazard.
Debt contracts are agreements where the borrower agrees to pay back the lender with interest over a specific period. Financial intermediaries act as middlemen between investors and borrowers. They help to reduce the risk of moral hazard by providing information about the borrowers and their investments.Government regulations can also help to reduce the risk of moral hazard by increasing information. Therefore, the correct option is option C, "government ownership of resources."
Learn more about moral hazard at :
https://brainly.com/question/30795543
#SPJ11
explain the role of international financial markets and institutions in global environments in evaluating their impact on the company’s risk management strategies
The role of international financial markets and institutions in global environments is to provide platforms for companies to access capital, manage foreign exchange risks, and hedge against market volatility.
These markets and institutions offer various financial instruments, such as stocks, bonds, derivatives, and insurance products, which allow companies to diversify their funding sources, optimize their risk exposure, and protect against potential losses. By evaluating the dynamics of these markets and institutions, companies can identify potential risks and opportunities, adjust their risk management strategies accordingly, and make informed decisions to protect their financial well-being in the global business landscape.
In a global environment, international financial markets and institutions play a crucial role in evaluating their impact on a company's risk management strategies. These markets provide companies with opportunities to raise capital, manage currency risks, and protect against market fluctuations. By accessing these markets and institutions, companies can diversify their funding sources and reduce reliance on a single market or currency, mitigating the risk of financial instability. Additionally, these institutions offer various financial instruments and products that enable companies to hedge against potential losses and manage their exposure to different types of risks. By monitoring and analyzing the performance of international financial markets and institutions, companies can assess the potential impact on their risk profile and adjust their risk management strategies accordingly, ensuring they are well-prepared to navigate the challenges and opportunities in the global business landscape.
Learn more about markets here:
https://brainly.com/question/32106392
#SPJ11
Cloth plc is considering making a bid to takeover Darwin Wools Limited. Alternatively, the group may set up a new subsidiary in New Zealand to produce wool in competition with Darwin Wools Limited. Required:
a) Briefly explain why Cloth plc might be considering having its own subsidiary in New Zealand rather than continuing to purchase from an independent company.
b) Describe the potential advantages and disadvantages of the potential takeover of Darwin Wools Limited, as opposed to Cloth plc setting up a new company in New Zealand.
c) Explain, and provide examples of, the various motives for direct foreign investment.
By investing in a foreign country, companies can acquire the assets they need to improve their competitiveness or expand their operations. Efficiency Seeking: Companies may invest in foreign countries to take advantage of cost savings, such as lower labor costs, cheaper raw materials, or more favorable tax regulations. By investing in a foreign country, companies can improve their efficiency and reduce their costs.
a) Reason for having its own subsidiary in New Zealand Cloth plc might be considering having its own subsidiary in New Zealand rather than continuing to purchase from an independent company because of the following reasons: Cloth plc would have more control over the quality and quantity of wool it purchases if it produced the wool themselves, rather than relying on an independent supplier.
The price of wool would also be more stable if the company could purchase it at cost and maintain it throughout the production process, avoiding any external price fluctuations.
b) Potential advantages and disadvantages of the potential takeover of Darwin Wools Limited The potential advantages of the potential takeover of Darwin Wools Limited are: Acquiring a new business: Acquiring Darwin Wools Limited would be advantageous for Cloth plc as it will allow the company to expand its operations.
Darwin Wools Limited already has the infrastructure, equipment, and workforce that Cloth plc would need to set up a new subsidiary, so it would be much quicker and cheaper than starting from scratch.
It would also provide the opportunity for Cloth plc to acquire new products or customers that they may not have previously had. Access to New Markets: Acquiring Darwin Wools Limited would also provide Cloth plc with access to new markets and customers. By acquiring Darwin Wools Limited, Cloth plc could expand its operations and reach a larger customer base.
Cost Savings: By acquiring Darwin Wools Limited, Cloth plc could reduce its costs by taking advantage of economies of scale, sharing resources, and reducing duplication. The potential disadvantages of the potential takeover of Darwin Wools Limited are: Increased Debt: Acquiring Darwin Wools Limited may require Cloth plc to take on additional debt or raise capital through other means.
This could increase the company's financial risk and reduce its ability to invest in other areas. Cultural Differences: Acquiring Darwin Wools Limited may involve integrating different cultures, management styles, and business practices. This could be a challenging process that could affect the success of the acquisition.
c) Various motives for direct foreign investment There are various motives for direct foreign investment, including the following: Market Seeking: Companies may invest in foreign countries to gain access to new markets and customers. By investing in a foreign country, companies can expand their operations and reach new customers.
Resource Seeking: Companies may invest in foreign countries to gain access to natural resources such as oil, gas, or minerals.
By investing in a foreign country, companies can take advantage of resources that are not available in their home country.
Strategic Asset Seeking: Companies may invest in foreign countries to acquire new technology, expertise, or other strategic assets.
By investing in a foreign country, companies can acquire the assets they need to improve their competitiveness or expand their operations.
Efficiency Seeking: Companies may invest in foreign countries to take advantage of cost savings, such as lower labor costs, cheaper raw materials, or more favorable tax regulations. By investing in a foreign country, companies can improve their efficiency and reduce their costs.
For more such questions on tax regulations
https://brainly.com/question/30157668
#SPJ11
Which of the following is NOT TRUE, among the possible challenges faced by Central Bankers when setting monetary policy? (Answer accordingly to what the model develop in class would predict)
O Price shocks are able to cause long-lasting changes in inflation that need to be addressed by monetary policy.
O Computed potential GDP depends on the model used, thus being subject to debate.
O If inflation this year is only influenced by demand conditions today, then it will have NO persistence.
The statement "If inflation this year is only influenced by demand conditions today, then it will have NO persistence" is NOT TRUE according to the model developed in class. Therefore option (C) is correct answer.
The model developed in class suggests that inflation can have persistence even if it is influenced solely by demand conditions in the current year. This is because expectations and past inflation can play a role in shaping future inflation dynamics. Therefore, the persistence of inflation is not solely determined by current demand conditions but can be influenced by various factors, including expectations, supply shocks, and past inflation.
Monetary policy plays a crucial role in managing inflation and stabilizing the economy. Central banks use various tools, such as adjusting interest rates and conducting open market operations, to influence the money supply, borrowing costs, and spending in the economy. Option (C) is correct answer.
Learn more about inflation https://brainly.com/question/777738
#SPJ11
Question 6 of 6 View Policies Current Attempt in Progress < (a) Net income On January 1, 2020, Blue Inc. had cash and common stock of $62,340. At that date, the company had no other asset, liability,
Based on the given information, we can determine that the other comprehensive income for 2020 is $5,100 and the accumulated other comprehensive income at the end of 2020 is also $5,100.
In order to determine the comprehensive income, other comprehensive income, and accumulated other comprehensive income for Blue Inc. in 2020, we need to consider the various components of income and gains.
(a) Net income:
To calculate net income, we need to consider the company's revenue and expenses. However, the given information does not provide any details about revenue or expenses other than the interest received on debt securities.
(b) Comprehensive income:
Comprehensive income includes both net income and other comprehensive income. Since we don't have the net income, we cannot determine the comprehensive income with the given information.
(c) Other comprehensive income:
Other comprehensive income includes unrealized gains or losses on available-for-sale securities. In this case, the company has an unrealized holding gain on the debt securities of $5,100 net of tax. The other comprehensive income for 2020 is $5,100.
(d) Accumulated other comprehensive income (end of 2020):
Accumulated other comprehensive income represents the cumulative amount of other comprehensive income over time. Since we know the other comprehensive income for 2020 is $5,100, the accumulated other comprehensive income at the end of 2020 will also be $5,100.
The complete question is:
Question 6 of 6 View Policies Current Attempt in Progress
(a) Net income On January 1, 2020, Blue Inc. had cash and common stock of $62,340. At that date, the company had no other asset, liability, or equity balances. On January 2, 2020, it purchased for cash $22,990 of debt securities that it classified as available-for-sale. It received interest of $4,480 during the year on these securities. In addition, it has an unrealized holding gain on these securities of $5,100 net of tax Determine the following amounts for 2020: (a) net income, (b) comprehensive income, (c) other comprehensive income, and (d) accumulated other comprehensive income (end of 2020).
(b) Comprehensive income (c) Other comprehensive income eTextbook and Media S $ $ (d) Accumulated other comprehensive income $ -/1 E 1.
Learn more about revenue here:
https://brainly.com/question/27325673
#SPJ4
If TC = 196-11Q + Q2 in perfect competition how much will each individual firm produce in the long-run?
In perfect competition, firms are price takers, which means that they cannot influence the price of the goods they produce. In the long-run, each individual firm in a perfectly competitive market will produce at the point where its marginal cost (MC) is equal to the market price (P) of the good.
Marginal cost (MC) is the additional cost incurred by the firm to produce an additional unit of output.Q is the quantity of output produced by the firm.In order to determine how much each individual firm will produce in the long-run,
we need to find the firm's MC and then set it equal to P.MC = TC / QIn this case, TC = 196 - 11Q + Q^2Therefore,MC = (196 - 11Q + Q^2) / QTo find the firm's long-run production level, we need to set MC equal to P. However, we don't know P. Instead This means that P = MC.
Therefore, we can set MR equal to MC to find the firm's long-run production level.MR = MC => P + QdP/dQ = (196 - 11Q + Q^2) / Q => P = (196 - 11Q + Q^2) / Q - QdP/dQ => P = (196 - 11Q + Q^2) / Q - Q(2Q - 11) / Q^2 => P = (196 - 13Q) / Q^2The firm's long-run production level is the quantity of output at which its MC is equal to P. Therefore,MC = P => (196 - 11Q + Q^2) / Q = (196 - 13Q) / Q^2 => 196Q - 11Q^2 + Q^3 = 196 - 13Q => Q^3 - 11Q^2 + 209Q - 196 = 0This is a cubic equation that can be solved by using the rational roots theorem.
Therefore, we can only estimate the solution to tThese roots are approximately equal to Q = 8.1 and Q = 12.9.Therefore, the firm's long-run production level is approximately equal to (8.1 + 12.9) / 2 = 10.5 units.
To know more about Marginal cost visit:-
https://brainly.com/question/14923834
#SPJ11
A bank will want to hold more excess reserves (everything else equal) when:
A bank will want to hold more excess reserves when: it perceives an increase in risk and uncertainty in the financial system.
A bank will want to hold more excess reserves when it perceives an increase in risk and uncertainty in the financial system. There are several factors that can contribute to this decision:
1. Economic instability: During periods of economic instability, such as recessions or financial crises, banks tend to become more cautious and increase their reserves. This is because they anticipate higher default rates on loans and potential liquidity shortages in the system. Holding more excess reserves provides a buffer to absorb unexpected losses and meet customer withdrawal demands.
2. Regulatory requirements: Banks are subject to regulatory requirements that specify the minimum level of reserves they must hold. If there are changes in these regulations, such as an increase in reserve requirements by the central bank, banks will need to adjust their reserve levels accordingly. They may choose to hold more excess reserves to ensure compliance and avoid penalties.
3. Uncertain market conditions: Volatile market conditions, such as fluctuations in interest rates or exchange rates, can create uncertainty for banks. In such situations, banks may choose to hold higher levels of excess reserves to mitigate potential losses and maintain stability. This allows them to navigate market uncertainties and ensure their ability to meet obligations.
4. Counterparty risk: If a bank perceives an increase in counterparty risk, meaning the risk of another bank or financial institution defaulting on its obligations, it may choose to hold more excess reserves. This provides a safeguard against potential disruptions in interbank lending and ensures the bank's ability to meet its own obligations.
Overall, the decision to hold more excess reserves is driven by a bank's assessment of risk and the need to maintain liquidity and stability. By holding higher reserves, banks aim to protect themselves against unexpected events and ensure their ability to operate smoothly even in challenging circumstances.
For more such information on: bank
https://brainly.com/question/417775
#SPJ11
Remaining Time: 1 hour, 46 minutes, 09 seconds. Question Completion Status: 2 3 5 1 9 10 12 13 14 15 16 Moving to another question will save this response. 4 R uestion 3 Mariam, Sabah and Fatima are p
Mariam, Sabah and Fatima are partners in a business. Mariam invested $10,000, Sabah invested $8,000 and Fatima invested $6,000. Therefore, Mariam will receive $2,500, Sabah will receive $2,000 and Fatima will receive $1,500.
If they make a profit of $6,000, how much will each partner receive. Let’s solve the problem using the following steps: First, we need to find the total investment of the three partners. That is Mariam invested $10,000Sabah invested $8,000Fatima invested $6,000The total investment of the three partners is;$10,000+$8,000+$6,000 =$24,000
Therefore, the three partners invested $24,000.Secondly, we need to calculate the share of each partner by using the ratio of each investment as follows
Mariam invested $10,000 and the total investment is $24,000; therefore her share in the profit is;$6,000 ×(10,000/24,000) =$2,500Sabah invested $8,000 and the total investment is $24,000 therefore her share in the profit is;$6,000 ×(8,000/24,000) =$2,000Fatima invested $6,000 and the total investment is $24,000
Therefore her share in the profit is;
$6,000 ×(6,000/24,000)
=$1,500.
Learn more about partners Visit: brainly.com/question/15913927
#SPJ11
Correct Question:
Remaining Time: 1 hour, 46 minutes, 09 seconds. Question Completion Status: 2 3 5 1 9 10 12 13 14 15 16 Moving to another question will save this response. 4 R and Mariam, Sabah and Fatima are partners, whta is the share among them.