The combined gas law is used to determine the relationship between the pressure, temperature, and volume of the gas. The volume of the gas at 0.250 atm is 236 L. Thus, option A is correct.
What is combined gas law?The combined gas law uses the ideal gas equation to estimate the temperature, volume, or pressure of the given gas.
Given,
Initial pressure = 0.500 atm
Initial temperature = 288.15 K
Initial volume = 120 L
Final pressure = 0.250 atm
Final temperature = 283.15 K
The final volume is calculated as:
V₂ = (P₁V₁ T₂) ÷ (P₂ T₁)
= 0.500 × 120 × 283.15 ÷ 0.250 × 288.15
= 16989 ÷ 72.03
= 235.86 L
Therefore, 236 L is the final volume at 0.250 atm.
Learn more about combined gas law here:
https://brainly.com/question/14648508
#SPJ1
Balance the following reaction:
C5H8 + _____ O2 ________ CO2. + _______ H2O
How much heat (q) will be released by water, H2O, if 34 grams of C5H8 reacts? Hint: This is a stoichiometry problem, before it’s a thermochemistry problem.
Balanced one
2C_5H_8+13O_2—»10CO_2+8H_2OMoles of Pentyne
Given mass/Molarmass34/680.5molMoles of H_2O
8/2(0.5)4(0.5)2mol1mol releases 241.8KJ
2mol releases 241.8(2)=483.6KJ
The solubility of which substance is least affected by the temperature of the water
Answer:
solo esto se responderte
Explanation:
Algunos solutos (por ejemplo, cloruro de sodio (NaCl) en agua) exhiben una solubilidad bastante independiente de la temperatura. Unos pocos, como el sulfato de cerio (III) y el carbonato de litio, se vuelven menos solubles en agua a medida que aumenta la temperatura.
Which of the following statements is true? Select one: a. A solution is a pure substance. b. A solution is a mixture. c. The solvent is dissolved in the solute. d. A solution has the same properties as a colloid.
Answer:
B
Explanation:
seriously what do i put in the x and y table im stuck and need to move to the next assignment
Remember the relationship
P is indirectly proportional to VSo
The pairs are
(2,4)(1,8)(4,2)(12,2/3)(2/3,12)And so on
19. For the reaction, 2S+ 30=2SO3, how many moles of so3 will be produced from 12.5 g 02 and excess S?
19. For the reaction, 2S+ 30=2SO3, how many moles of so3 will be produced from 12.5 g 02 and excess S?
:
For the reaction: 2S(s) + 3O2 -> 2SO2(g) How many moles of SO3 will be produced from 2.0 mol O2 and excess S?
Answer:
Explanation:
19. For the reaction, 2S+ 30=2SO3, how many moles of so3 will be produced from 12.5 g 02 and excess S?
how many moles of O2 are needed to produce 3.95 moles of Fe2O3
Answer:
4Fe+3O2- 2Fe2O3
the ratio: 3:2
x:3.95
x=5.92 moles of O2
Which of the following is true of folded mountains, fault-block mountains, and volcanic mountains?
Form from the buildup of lava and ash
Form only at boundaries between two oceanic plates
Form only at boundaries between two continental plates
Form at both convergent and divergent plate boundaries
Answer:
Here are the following answers to the five questions:
(1) "Form only at boundaries between two continental plates."
(2) "A fault-block mountain"
(3) "Island arcs form when hot, fluid rock rises through thin spots in Earth's crust, whereas hotspot volcanoes form when two oceanic plate boundaries push against each other until subduction happens and the plates partially melt."
(4) "The fault plane runs from the top of the rock to the bottom of the rock at an angle greater than 45 degrees."
(5) "Segments of Earth's crust bent and doubled over, and moving wind and water gradually shaped the rock into gently sloping domes."
Explanation:
please explain this question
this is urgent thank u
Answer:
the answer is C which says 1 and 2
Why would solar power be the best energy option for our new high school?
Explain why!
Answer:
Energy costs are high for many school districts. Therefore, unlimited free power generated by the sun can deliver huge cost savings when compared to grid-generated power. With a modestly sized solar array, cost savings are alike modest.
Explanation:
4. Who has the most sensitive taste buds?
adults
babies
teenagers
the elderly
Answer:
Taste bufs
Explanation:
May be teenager or adult is the most probable answer because teenager and adult are fully developed species of human so they can have most sensitive taste bud
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT
Please HELP
Part 1. A lightly inflated balloon is placed in a freezer. Explain the change to the size of the balloon based on the kinetic molecular theory
Part 2. What would most likely happen to the balloon if it was instead kept outside in the sun for some time? Explain your answer based on the kinetic molecular theory
In both cases, assume the balloon is tied tight enough so that air does not escape. (10 points)
The three macroscopic properties of a gas in terms of the microscopic nature of atoms and the molecules making up the gas is explained by the kinetic theory of gases. The macroscopic properties like pressure, volume and temperature are used to study a gas.
What is kinetic theory of gas?The kinetic theory of gases is a theoretical model which describes the molecular composition of the gas in terms of a large number of submicroscopic particles which include atoms and molecules. Gas is a combination of large number of atoms or molecules.
The kinetic theory of gases considers that the atoms or molecules of a gas are constantly moving point masses which contain a huge inter-particle distance and may undergo perfect elastic collisions.
1. Since the particles are in motion, the average kinetic energy is proportional to the temperature of the gas. So when the inflated balloon is placed in a freezer, the balloon shrinks due to decrease in temperature.
2. When balloon is kept outside in the sun, it will burst due to expansion of gases.
To know more about kinetic theory of gases, visit;
https://brainly.com/question/30648725
#SPJ2
The most effective ways to increase the rate of a reaction are to
Answer:
Use a catalyst, use more reactants, have a larger reactant surface area, more pressure, higher temperature.
Explanation:
Which compound could serve as a reactant in a neutralization reaction?.
Answer:
In this type of neutralization reaction, the acids and bases are the reactants, since they are the materials that will react to form a new solution. The products are water and salt since they have been created following the reaction.
Explanation:
Neutralization occurs when a strong acid and a strong base come together in a chemical reaction to form water and salt.
In chemistry, acids and bases are measured on the pH scale, which ranges from 0 to 14. Pure water sits in the middle, at a neutral 7. Anything below 7 is an acid, and anything above 7 is a base. Often, solutions are either too acidic or too basic, so a reaction must take place in order to achieve neutralization.
That neutralization leads to the formation of water and salt. In chemistry, salt doesn’t necessarily just mean table salt. It is also a broader term that categorizes the compound that is created in the reaction between an acid and a base.
Water’s property of surface tension is due to _____.
A. capillary action
B. solubility
C. cohesion
D. adhesion
E. All of the above
Answer:
C. cohesion
Explanation:
The cohesive force between liquid molecules are responsible for the phenomenon known as surface tension
Which statement describes what happens when somebody slaps their hand on a wall?
Answer:
B. Wall applies equal reaction force on hand
Explanation:
This is newton's third law. You push something, that something pushes you back with same force. The direction is opposite, so if I push a wall, the wall pushes me back with same force just in opposite direction (so wall towards me). This is why option A is incorrect b/c it says force in same direction as wall. C and D talk about unequal force which is incorrect.
Answer:Wall applies equal reaction force on hand
Explanation:
explain how these concepts are related: species, population, and community
Answer:
Organisms that belong to the same species, form groups, and interact together in the same environment make the level of the population whereas a community has groups of different species living together in an environment. Species are the group of individuals that are genetically related to each other.
What is the expansion for the chemical symbol of tungsten?.
3. Which half-reaction equation represents reduction?
Answer:
Which half-reaction equation represents reduction?
answer is 2
Answer:
B CU2+ +2e- -> Cu
Explanation:
reduction means something opposite of the word
reduction means an electron is GAINED in the part before the arrow
it's the " + 2e- " part of the equation before the arrow or "->" part
oxidation is the LOSING of an electron so it would show up to the right of arrow or "->" of the equation as "+2e-"
both reduction & oxidation reactions are called "redox"
in a battery
anode is oxidation
cathode is reduction
anode is positive
cathode is negative electrode
decomposing compounds is electrolysis.
https://brainly.com/question/16118863
https://brainly.com/question/15313673
Which reactant controls the amount of product formed?.
Answer:
limiting reactant gives ................
Answer:
Limiting Reagent or Limiting Reactant
Explanation:
The limiting reagent of a reaction is the reactant that runs out first. Once it is completely consumed, the reaction stops.The limiting reagent is the only chemical that is used to calculate the theoretical yield. It is used up first. After that, any excess reagent will not be able to produce more products.And to assess which reactant is which, we must usually have quantities of each reagent in a chemical reaction...and of course we should write a stoichiometric equation that is balanced with respect to mass and charge in order to assess the stoichiometric equivalence.
We could examine for instance, the combustion of methane gas, the which MAY have cooked your dinner … its combustion reaction is as shown...
[tex]CH_4(g) + 2O_2(g) rarr CO_2(g) + 2H_2O(g) + Delta[/tex]
And here conditions of COMPLETE combustion pertain; there is DIOXYGEN in excess, AND methane is the limiting reagent. A [tex]10*g[/tex] mass of methane represents a molar quantity of …
[tex](10.0*g)/(16.01*g*mol^-1)=0.623*mol[/tex]
And with respect to dioxygen we thus require...
[tex]0.623*mol*32.00*g*mol^-1=40*g[/tex]
...but this quantity (AND MORE) is available from the atmosphere....and the methane was the limiting reagent....
Which equation shows a physical change?
A-Pb(NO3)2 (aq) + 2KI(aq) → 2KNO3(aq) + PbI2(s)
B-2H2O(l) → 2H2(g) + O2(g)
C-H2O(g) → H2O(s)
D-HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
Answer:
C
water has undergone a phase change and the composition of a substance was not changed
I NEED HELP ASAP!!!!!!!!!!!
WITHIN THE HOUR
Thanks
Answer:
C
Explanation:
Actually, arranged to the size of smallest to least atom radius size = C
Atomic sizes generally get smaller as you go from L to R across a row of the periodic table.
HELP QUICKLY PLEASEEE
Bromine is a chemical element with the symbol Br and atomic number 35. It is the third-lightest halogen and is a volatile red-brown liquid at room temperature that evaporates readily to form a similarly coloured vapour.
Answer:
Bromine is a nonmetal in group 7 or group 17, known as the halogens. It has 7 valence electrons.
So the correct answer is "nonmetal, 7 valence electrons"
Which of the following happens to an acid when it reacts with another substance?
A. Receives hydrogen ion
B. It receives a hydroxide ion
C. It donates a hydroxide ion
D. It donates a hydrogen ion
When an acid reacts in a reaction, it donates hydrogen ion as the only positive ion.
What is an acid?According to Bronsted-Lowry's definition, an acid is a substance that donates hydrogen ions as the only positive ion in reactions.
Following this definition, it can be concluded that when an acid reacts with another substance, it donates one or more hydrogen ions.
A good example is shown in the equation below:
[tex]HCl + KOH --- > KCl + H_2O[/tex]
In the reaction above, HCl donated a hydrogen ion.
More on acids can be found here: https://brainly.com/question/14072179
#SPJ1
Answer:
a
Explanation:
just took the quiz and this is correct.
Predict and write the formulas for the two products of the reaction of aluminum metal al(s) with the copper(ii) chloride.
Answer:
Cu (s) and AlCl₃ (s)
Explanation:
This reaction can be classified as a single-displacement reaction, aka. a single-replacement reaction. These reactions involve one element swapping out another element in a compound. In this reaction, aluminum is taking the place of copper (ii) in the copper (ii) chloride compound. Aluminum takes the place of copper (ii) specifically because aluminum is more likely form a cation than anion. Copper (ii) serves as a cation in the compound.
Al (s) + CuCl₂ (s) --> Cu (s) + AlCl₃ (s)
The final products are copper (ii) metal and aluminum chloride. The metal of copper (ii) is produced instead of the cation in order to maintain the neutral charge balance of the reaction. The chorine has a subscript of 3 because aluminum usually forms cations of a +3 charge while chlorines form anions with a -1 charge.
The balanced equation is:
2 Al (s) + 3 CuCl₂ (s) --> 3 Cu (s) + 2 AlCl₃ (s)
What pressure, in atm, is required to reduce 60.0 mL of a gas at standard conditions to
10.0 mL at a temperature of 25.0 °C?
Give the correct name for the structure in the image.
Answer:
2,5,6-trimethyloctane
Explanation:
1) Count the number of carbons in the longest chain. If the structure contains a functional group (e.g. double bond, -OH), they have to be part of the chain that you're counting.
• The straight chain is the longest chain, and it contains 8 carbons
• Without the additional 3 methyl (-CH₃) substituents, it would be called octane (since it is an alkane)
2) Assign location numbers for the substituents, ensuring that they are the lowest possible numbers
• From left to right, we could name it as 2,5,6-trimethyloctane
• From right to left of the parent chain, it would be called 3,4,7-trimethyloctane
• Assigning from left to right gives us the lowest location numbers as the sum of the numbers is 13 instead of 14
• Remember to add 'tri' since we have 3 methyl groups
Which shows an isomer of the molecule below?
The isomer of the molecule in the depicted image would be A.
What are isomers?Isomers are molecules with the same chemical formula but different arrangements of their component atoms. Isomers also have different properties.
The original molecule in the image has a triple bond with 4 carbon atoms. Thus, its isomers must also have a triple bond with 4 carbon atoms.
The only option with a triple bond and 4 carbon atoms in the image is option A.
More on isomers can be found here: https://brainly.com/question/13422357
#SPJ1
find the molarity of 4.9 g of h2so4 in 400 ml solution
The molarity of a solution that contains 4.9 g of [tex]H_2SO_4[/tex] in 400 ml of solution would be 0.12465 M
Define molarity of a solution.
Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
Mathematically,
[tex]Molality = \frac{Moles \;solute}{olume \;of \;solution \;in \;litre}[/tex]
Mole of 4.9 g [tex]H_2SO_4[/tex]
= [tex]\frac{mass}{molar \;mass}[/tex]
= [tex]\frac{4.9 g}{98.08}[/tex]
= 0.0499
[tex]Molality = \frac{Moles \;solute}{ olume \;of \;solution \;in \;litre}[/tex]
[tex]Molality = \frac{ 0.0499}{0.4}[/tex]
= 0.12465 M
Hence, the molarity of a solution that contains 4.9 g of [tex]H_2SO_4[/tex] in 400 ml of solution would be 0.12465 M.
Learn more about molarity here:
https://brainly.com/question/3865040
#SPJ1
Key Concepts
Identify the choice that best completes the statement or answers the question.
13. Basalt is a gray or black igneous rock. Pilar uses an absolute dating method to study a sample of basalt. What will the method help her learn about the basalt sample?
F the age of the sample
G the composition of the sample
H the physical structure of the sample
I the geographic distribution of the sample
Answer:
Explanation:
Answer
It tells you what method she used and what she wanted to accomplish. She is using
an absolute dating method to study a sample of basalt
So the answer you should post is F. F and the quotation above say the same thing.
What happens during stage 3 of cold water immersion.
Answer:
Stage 3 or long-term immersion hypothermia happens after 30 minutes or more. Cold water pulls heat from the body, and the body’s core temperature drops. This eventually leads to loss of consciousness and death.