bill took a nap for 1 1/4 hour on friday and then took a nap for 3/4 hour on tuesday. how much longer was Bill's nap on friday?

Answers

Answer 1
1/2 (2/4) of an hour longer. If you take 1 1/4 and subtract 3/4 you get 2/4=1/2
Answer 2
Answer: 30 minutes aka half an hour

Explanation: 1 1/4 hours in minutes = 75 min, 3/4 hours = 45 minutes so 75-45=30

Related Questions

The manager of The Cheesecake Factory in Boston reports that on six randomly selected weekdays, the number of customers served was 175, 125, 180, 220, 240, and 245. She believes that the number of customers served on weekdays follows a normal distribution. Construct the 99% confidence interval for the average number of customers served on weekdays.

Answers

Answer:

(121.576 ; 273.424)

Step-by-step explanation:

Given the data:

175, 125, 180, 220, 240, 245

We can calculate the mean and standard deviation

Mean = Σx/ n = 1185 / 6 = 197.5

Standard deviation = 46.125 (calculator)

The confidence interval :

Mean ± margin of error

Margin of Error = Tcritical * s/sqrt(n)

Tcritical at 99%, df = n - 1 ; 6 - 1 = 5

Tcritical = 4.032

Margin of Error = 4.032 * 46.125/√6

Margin of error = 75.924

Confidence interval :

197.5 ± 75.924

Lower boundary = 197.5 - 75.924 = 121.576

Upper boundary = 197.5 + 75.924 = 273.424

(121.576 ; 273.424)

What is the answer for this question?

Answers

Answer:

The answer is A 1 4/5

Work:

7 1/5- 6 2/5

turn 7 1/5 into 6 6/5 and now subtract the two fractions

6/5-2/5= 4/5

now subtract the whole numbers:

6-6=1

So, your answer should be 4/5 (A)

Find the value of x in the given figure

Answers

Answer:

20 degrees

Step-by-step explanation:

Angles on a line equal 180 degrees.

180–140=40

40=2x

x=20

20 degrees

Since the whole line should be 180 degrees, and the right number is 140 we Subtract that from 180
180-140=40
2x=40
X=20 Degrees

The volume of a particular die is 6000 mm. Use the fact that 10 mm equals 1 cm to convert this
volume to cm.​

Answers

Answer:

600 cm³

Step-by-step explanation:

6000 mm/10 mm = 600 cm

You damage your car and it will cost $7,200 to repair. You have a $1,000 deductible. How much will the insurance company pay?

Answers

Answer:

Amount paid by insurance company = $6,200

Step-by-step explanation:

Given:

Total cost of car damage = $7,200

Amount deductible = $1,000

Find:

Amount paid by insurance company for total damage

Computation:

Amount paid by insurance company = Total cost of car damage - Amount deductible

Amount paid by insurance company = $7,200 - $1,000

Amount paid by insurance company for total damage = $6,200

PLSSSSSS HELP ASAP !!!

Answers

Answer:

m4+m5=180

answer is second option

Please help me with this question

Answers

Answer:

B

Step-by-step explanation:

In a boxplot, when the median is in the middle of the box, or when there are equal proportions around the median, the distribution is symmetric. As is shown here, the median is closer to the left side of the box, making it positively skewed (the mean is greater than the median) and not symmetric.

The sum of 10x + 6 and -x + 8

Answers

9x +14

aisdlkjfhajlsdfhlakjsdhfla

When a number is decreased by 40% of itself the result is 96. What is the number?

Answers

Answer:

160

Step-by-step explanation:

96 / (100%-40%) = 96/ (60%)

= 96/0.6 = 160

Q) 96/(100% - 40%)

→ 96/ 60%

→ 96/ 0.6

→ 160 is the number.


If 80 persons can perform a piece of work in 16 days of 10 hours each, how
many men will perform a piece of work twice as great in tenth part of the time
working 8 hours a day supposing that three of the second set can do as much
work as four of the first set?

Answers

Answer:

The number of men needed to perform a piece of work twice as great in tenth part of the time  working 8 hours a day supposing that three of the second set can do as much  work as four of the first set is:

1200 men.

Step-by-step explanation:

To find the answer, first, we're gonna find how many hours take to make the piece of work in 16 days, taking into account each day just has 10 hours:

Number of hours to make a piece of work = 16 * 10 hoursNumber of hours to make a piece of work = 160 hours.

Now, we divide the total hours among the number of persons:

Equivalence of hours per person = 160 hours / 80 persons.Equivalence of hours per person = 2 hours /person

This equivalence isn't the real work of each person, we only need this value to make the next calculations. Now, we have a piece of work twice as great as the first, then, we can calculate the hours the piece of work needs to perform it (twice!):

Number of hours to make the second piece of work = 160 hours * 2Number of hours to make the second piece of work = 320 hours

We need to make this work in tenth part of the time working 8 hours a day, it means:

Time used to the second work = 320 hours / 10Time used to the second work = 32 hours Time used to the second work = 32 hours / 8 hours (as each day has 8 hours)Time used to the second work = 4 days

Now, we know three of the second set can do as much  work as four of the first set, taking into account the calculated equivalence, we have:

Work of four workers of first set = Work of three workers of second setWork of four workers of first set = Equivalence * 4 persons.Work of four workers of first set = 2 hours /person * 4 personsWork of four workers of first set = 8 hours.

So, three persons of the second set can make a equivalence of 8 hours. At last, we calculate all the number of workers we need in a regular time:

Number of needed workers in a regular time = (320 hours / 8 hours) * 3 persons.Number of needed workers in a regular time = 40 * 3 personsNumber of needed workers in a regular time = 120 persons

Remember we need to perform the job not in a regular time, we need to perform it in tenth part of the time, by this reason, we need 10 times the number of people:

Number of needed workers in tenth part of the time = 120 persons * 10Number of needed workers in tenth part of the time = 1200 persons

With this calculations, you can find the number of men needed to perform a piece of work twice as great in tenth part of the time  working 8 hours a day supposing that three of the second set can do as much  work as four of the first set is 1200 persons.

PLEASE HELP ME FAST I WILL GIVE BRAINLYEST

Answers

7.)

cbrt(1200)

10.63

8.)

sqrt(112)

10.58

Answer:

1.) because 10^3=1000 and 11^3 = around 1330  we know that the answer must fall between 10 and 11. Because they're pretty much equal distance I would estimate it to be around 10.5 (if you need an exact answer it's 2∛150)

2.) because 11^2=121 and 10^2= 100 we know that it must fall between 10 and 11. Because these are pretty much equal distance as well I would estimate it to be around 10.5 as well (if you need an exact answer it's 4√7)

Step-by-step explanation:

Create a table to represent the function y=1/3x+4

Answers

X=-3 i am not sure about the answer

Answer:

this is a linear equation. whatever value you set for x, you substitute and make a table that would probably look like this.

      x      |     y

-------------|-----------

5            | 17/3       <------- what would y be if x is 5?

3             | 5                     lets substitute x with 5

               |                          y=1/3*5+4

               |                         y=5/3+4

               |                        y=17/3

What are the roots of the polynomial x2 - 4x + 1 ?
Work out your answer on our whiteboard. Then, click the buttons below to
see the step-by-step solution.

Answers

Answer:

x = (2 + √3) , (2 - √3)

Step-by-step explanation:

GIVEN :-

A quadratic polynomial x² - 4x + 1

TO FIND :-

Roots of the quadratic polynomial

GENERAL FORMULAE TO BE USED IN THIS QUESTION :-

Quadratic formulae -

For a polynomial ax² + bx + c , its roots are :-

[tex]x = \frac{-b + \sqrt{b^2 - 4ac} }{2a} \; ; \frac{-b - \sqrt{b^2 - 4ac} }{2a}[/tex]

SOLUTION :-

Use the quadratic formulae to find the roots of the polynomial.

[tex]=> x = \frac{-(-4) + \sqrt{(-4)^2 - 4 \times 1 \times 1c} }{2 \times 1} \; ; \frac{-(-4) - \sqrt{(-4)^2 - 4 \times 1 \times 1} }{2 \times 1}[/tex]

         [tex]= \frac{4 + \sqrt{16 - 4} }{2} \; ; \frac{4- \sqrt{16 - 4}}{2}[/tex]

         [tex]= \frac{4 + \sqrt{12} }{2} \; ; \frac{4- \sqrt{12}}{2}[/tex]

         [tex]= \frac{4 + 2\sqrt{3} }{2} \; ; \frac{4- 2\sqrt{3}}{2}[/tex]

         [tex]= \frac{2(2 + \sqrt{3})}{2} \; ; \frac{2(2- \sqrt{3})}{2}[/tex]

         [tex]= (2 + \sqrt{3} ) \; ; (2 - \sqrt{3} )[/tex]

HELP PLSSS I WILL GIVE THE FIRST PERSON TO ANSWER BRAINLYIST IF THERE RIGHT
i suck at math its easy

Answers

Option B and D are the correct answers

Answer:

A and B I guess so

If the weight (in grams) of cereal in a box of Lucky Charms is N(489,6), what is the probability that the box will contain less than the advertised weight of 466 g

Answers

Answer:

0.000064 = 0.0064% probability that the box will contain less than the advertised weight of 466 g.

Step-by-step explanation:

Normal Probability Distribution:

Problems of normal distributions can be solved using the z-score formula.

In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the z-score of a measure X is given by:

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the p-value, we get the probability that the value of the measure is greater than X.

N(489,6)

This means that [tex]\mu = 489, \sigma = 6[/tex]

What is the probability that the box will contain less than the advertised weight of 466 g?

This is the p-value of Z when X = 466. So

[tex]Z = \frac{X - \mu}{\sigma}[/tex]

[tex]Z = \frac{466 - 489}{6}[/tex]

[tex]Z = -3.83[/tex]

[tex]Z = -3.83[/tex] has a p-value of 0.000064

0.000064 = 0.0064% probability that the box will contain less than the advertised weight of 466 g.

Help me out thankssssss !!!!!!

Answers

Answer:

78/2=39°

Step-by-step explanation:

thx for the points

Circle the answer choice below that does not equal the following:
– 80/10
1) - 8
2) 80/-10
3) - (80/10)
4) 8

Answers

Answer: 4) 8

Step-by-step explanation:

-80/10=-8

-8 = - 8. - No

80/-10= - 8. - 8=-8 - No

-(80/10)=-(8)=-8. - 8=-8 - No

8 - Yes.

-8 -> I’m sorry if it’s wrong it seems like simple math

Cells use the hydrolysis of adenosine triphosphate, abbreviated as ATP, as a source of energy. Symbolically, this reaction can be written asATP(aq)+H2O(l)⟶ADP(aq)+H2PO−4 (aq)where ADP represents adenosine diphosphate. For this reaction, ΔG∘=−30.5kJ/mol.a. Calculate K at 25∘C .b. If all the free energy from the metabolism of glucoseC6H12O6(s)+6O2(g)⟶6CO2(g)+6H2O(l)goes into forming ATP from ADP, how many ATP molecules can be produced for every molecule of glucose?

Answers

Answer:

Step-by-step explanation:

From the given information:

ΔG° = -30.5 kJ/mol

By applying the following equation to calculate the value of K.

ΔG° =-RT㏑K

making ㏑ K  the subject of the formula:

[tex]\mathtt{ In \ K} = \dfrac{\Delta G^0}{-RT}[/tex]

where;

Temperature at 25° C = (25 + 273)K

= 298K

R = 8.3145 J/mol.K (gas cosntant)

[tex]\mathtt{ In \ K} = \dfrac{-30.5 \times 10^{3}\ J /mol} {-(8.3145 \ J/mol. K \times 298 \ K}[/tex]

[tex]\mathtt{ In \ K} = \dfrac{-30.5 \times 10^{3}\ J /mol} {-2477.721 J/mol }[/tex]

㏑K = 12.309

[tex]K = e^{12.309}[/tex]

K = 221682.17

K = 2.22 × 10⁵

b) The reaction for the metabolism of glucose is given as:

[tex]C_6H_{12} O_6 + 6O_{2(g)} \to + 6CO_{2(g)} + 6H_2O_{(l)}[/tex]

From the above expression, let calculate the Gibbs free energy by using the formula:

[tex]\Delta G^0_{rx n }= \Delta G^0_{product}- \Delta G^0_{reactant}[/tex]

[tex]\Delta G^0_{rx n }= [6 \times \Delta G^0_{f}(CO_2) + 6 \times \Delta G^0_{f}(H_2O)] - [1 \times \Delta G^0_{f}(C_6H_{12}O_6) + 6 \times \Delta G^0_{f}(O_2)][/tex]

At standard conditions;

The values of corresponding compounds are substituted into the equation above:

Thus,

[tex]\Delta G^0_{rx n }= [6 \times (-394) + 6 \times (-237)] - [1 \times (-911) + 6 \times (0)] \ kJ/mol[/tex]

[tex]\Delta G^0_{rx n }= [-2364-1422] - [-911+0] \ kJ/mol[/tex]

[tex]\Delta G^0_{rx n }= -3786 +911 \ kJ/mol[/tex]

[tex]\Delta G^0_{rx n }= -2875 \ kJ/mol[/tex]

[tex]\Delta G^0_{rx n }= -2875000 \ J/mol[/tex]

Now, the no of ATP molecules generated = [tex]\dfrac{\Delta G^0 \text{of metabolism for glucose}}{\Delta G^0 \text{of hydrolysis for ATP}}[/tex]

= (-2875000 J/mol ) / -30500 J/mol

= 94.26

≅ 94 ATP molecules generated

which of these tables represents a function

Answers

Answer: choice D

Step-by-step explanation:

In order for something to be a function for every x input there must be exactly 1 y output. This means that if x is a number then y must always be 1 number and that 1 number only.

HELP ME PLS!!!!

a circle has been divided into 36 equal angles what is the measure of each angle?

Answers

Answer:

10°

Step-by-step explanation:

360/36 = 10

What is the area??!??

Answers

Answer:

142.7 m²

Step-by-step explanation:

but sure, what you know about triangles and trigonometry (simplified, the relationship of angles and sides of shapes based on circles enclosing them)

so, here a quick summary of important facts and angle/side relationships in triangles :

the sum of all angles in a triangle is always and for every triangle 180 degrees.

sin(angle) is vertically up or down from the horizontal diameter of the encircling circle to the point on the circle hit by a line from the center of the circle with the described angle from the horizontal diameter.

cos(angle) is horizontally left or right from the center of the encircling circle to the point, where the sine-line hits the horizontal diameter.

the sides are named in relation to their opposing corners and their angles. so, for example, side a is opposing the corner point A and the angle at this point (also called A).

here it is also important to know :

a/sin(A) = b/sin(B) = c/sin(C)

and the area of a general triangle is

area = 1/2 × b × c × sin(A) or

1/2 × a × c × sin(B) or

1/2 × a × b × sin(C)

so, if we want to use the first option, we need to calculate b first. for this we use

b/sin(B) = c/sin(C)

b = (c × sin(B)) / sin(C)

for this we need to calculate C first. and we use

A + B + C = 180

C = 180 - A - B = 180 - 54.3 - 30.4 = 95.3 degrees

=>

b = (26.3 × sin(30.4)) / sin(95.3) = 13.36583...

=> area = 1/2 × 13.36583... × 26.3 × sin(54.3) = 142.7324...

= 142.7 (rounded)

Someone please answer yes I give brainliest​

Answers

slope is y2-y1 over x2-x1 so it is (5-9/0-4)

Find the least number by which 1323 must be multiplied so that the product is a perfect cube

Answers

Answer:

Step-by-step explanation:

So, to solve this, lets just break down 1323.

Just looking at it, I am going to take a 3:

1323/3

=

441

So now we have:

3*441=1323

Can we break down 441 any more?

Yup, I can see that 3 goes into 450, 150 times and 441 is 9 less than 450, which means it 3 times less than 150 times, which is 147.

So now we have:

3*3*147=1323

Again, we can take something from 147.

7*20 is 140, and 147 is 7 more than that. So 7*21=147.

This further means:

3*3*7*21=1323

Now it probably isnt too difficult now.

21 can be broken down into 3*7.

So we can rewrite it as:

3*3*7*3*7=1323

And we can use exponents for the extra 3's and 7's we have, so we can simplfy it as:

3^3*7^2=1323

The perfect cube here is 3, since we cube 3(3^3), and then multiply it by 2 7s to make 1323.

The perfect square here is 7, since we square 7(7^2), and then multiply it by 3 3s.

So the PERFECT CUBE for your answer is 3.

The PERFECT SQUARE is 7.

Hope this helps!

I will love and rate 5.0 if done correctly with no images and no trolling for answer.

A hardware store receives shipments containing 600 light bulbs each. A sample of 75 light bulbs in a given shipment contains 3 that are defective. What is the sample ratio of defective light bulbs to total light bulbs in the shipment written as a percent?

A - 4%
B - 10%
C - 20%
D - 76%

Answers

The correct answer should 4% because the ratio is 3 out of 75 which would leave 72 non-defective bulbs. So your answer is 4%

In the year 2000, the average car had a fuel economy of 22.6 MPG. You are curious as to whether the average in the present day is less than the historical value. What are the appropriate hypotheses for this test

Answers

Answer:

The appropriate null hypothesis is [tex]H_0: \mu = 22.6[/tex]

The appropriate alternative hypothesis is [tex]H_1: \mu < 22.6[/tex]

Step-by-step explanation:

The average car had a fuel economy of 22.6 MPG. Test if the current average is less than this.

At the null hypothesis, we test if the current average is still of 22.6 MPG, that is:

[tex]H_0: \mu = 22.6[/tex]

At the alternative hypothesis, we test if the current mean has decreased, that is, if it is less than 22.6 MPG. So

[tex]H_1: \mu < 22.6[/tex]

For a statistics project, Lauren distributed a questionnaire and asked her classmates to fill it out. 2 of them did.

Is this sample of the students in the class likely to be representative? Yes or no

Answers

No, because only a minority of the students answered it.

wHAT IS THE REFERENCE ANGLE -935°​

Answers

i think it's 35° (^^)

WILL MARK BRAINLIEST PLEASE HELP

Answers

maybe it might 14 but i’m not sure.

Some help figuring out the answer?? Also explain a little how you got there

Answers

9514 1404 393

Answer:

  x = 10·cos(θ) -4·cot(θ)

Step-by-step explanation:

Apparently, we are to assume that the horizontal lines are parallel to each other.

The relevant trig relations are ...

  Sin = Opposite/Hypotenuse

  Cos = Adjacent/Hypotenuse

If the junction point in the middle of AB is labeled X, then we have ...

  sin(θ) = 4/BX   ⇒   BX = 4/sin(θ)

  cos(θ) = x/XA   ⇒   XA = x/cos(θ)

Then ...

  BX +XA = AB = 10

Substituting for BX and XA using the above relations, we get

  4/sin(θ) +x/cos(θ) = 10

Solving for x gives ...

  x = (10 -4/sin(θ))·cos(θ)

  x = 10·cos(θ) -4·cot(θ) . . . . . simplify

_____

We used the identity ...

   cot(θ) = cos(θ)/sin(θ)

14+6×(9-6)

please answer ​

Answers

Answer:

32

Step-by-step explanation:

14+6(9-6)

[9-6=3]

14+6x3

[6x3=18]

14+18

32

---

hope it helps

Answer:

14+6×(9-6)=32

Other Questions
What are the solutions of x2 - 2x +17 - 0?O A. x = 1+2, or x = 1 - 2O B. X = 1+4, or x = 1- 47O c. x = 2, or x = -2O D. x = 4; or x = -4/ What is the difference, if any, between slander and libel?A) Libel is illegal, while slander is legal but still considered unethical.B) Libel is made in public in a verbal way, and slander is written.C) Slander is illegal, while libel is legal but still considered unethical.D) Slander is made in public in a verbal way, and libel is written. Helppppppppppp meeeeeee please ASAP Which statements correctly describes the expansion of the united states between 1789 and 1850?choose ALL the correct answers.1.THE UNITED STATES WENT TO WAR AGAINST BRITAIN TO GAIN THE OREGON TERRITORY.THE UNITED STATES DOUBLED IN SIZE BY PURCHASING THE LOUISIANA TERRITORY FROM FRANCE.THE UNITED STATES PURCHASED AND SIGNED TREATIES FOR LAND BUT NEVER WENT TO WAR TO GAIN TERRITORY.THE UNITED STATES ACQUIRED A LARGE PORTION OF THE SOUTHEAST AFTER A WAR WITH MEXICO. which equation represents a line that is parallel to the line whose equation is y=3/2x-3 and passes through the point (1, 2)? Candle Corp. applies manufacturing overhead costs to products at a budgeted indirect-cost rate of $80 per direct manufacturing labor-hour. A retail outlet has requested a bid on a special order of a necklace. Estimates for this order include: Direct materials of $44,000; 300 direct manufacturing labor-hours at $25 per hour; and a 20% markup rate on total manufacturing costs. The bid price for this special order is ________. Why is it important to establish paternity? What are the benefits of doing so? Provide your answer in 2-3 sentences. 1. Which answer choice describes one flaw in the modernization theory of global stratification?A. its assumption that peripheral nations prevent semi-peripheral nations from entering the global marketB. its assumption that semi-peripheral nations are incapable of industrializingC. its inherent ethnocentric biasD. the importance of semi-peripheral nations' industrializing2. Which answer choice describes a flaw in dependency theory of global stratification?A. Countries such as China do not necessarily want to be more like core nations.B. Countries such as China are growing more dependent on core nations.C. Previously high-income nations, such as China, have been economically overpowered by low-income nations entering the global marketplace.D. Previously low-income nations, such as China, have successfully developed their economies and can no longer be classified as dependent on core nations. This detail provides historical context by showing a development in technology. development in politics. significant world event. significant viewpoint. There are three complete tissue layers. b. Flatworms may be either free living or parasitic. c. Flatworms have a sac body plan, with only a mouth and no anus. d. Parasitic flatworms have a well-developed head with eyespots and nerves concentrated into a brain. e. Most planaria are found in marine environments, but some dwell in freshwater and moist terrestrial environments. An actuary was analyzing the loss experienced by flooding on houses and concluded that it was uniformly distributed on [0, 1000]. After taking another look at the data, he realized the loss amounts used were in real dollars. He then determined that the inflation rate was at 6.5%. Assume that the rest of his analysis still holds true. Calculate the probability that the loss in nominal dollars is less than 1000, given that the loss in nominal dollars is greater than 200. The difference between the measures of two complementary angles is 56 determine the measures of the two angles. The larger angle has a measure of? And the smaller angle has a measure of? how was the state of the ecosystem before the wolves were introduced? Explain TWO steps you could take when you perform an impact study to testthe effectiveness of an intervention programme. [tex]-2\sqrt{50x^5} +5\sqrt{18x^5}[/tex] Question 1 (5 points) Surgical pathology that includes gross and microscopic examination and additional ascending levels of physician work is which level?Question 1 options:A) Level IB) Level VIIIC) Level IID) Level IVQuestion 2 (5 points) Read the following Hematology Report and assign the correct CPT code.Hematology ReportPATIENT: Harvey ZapataPHYSICIAN: Glory Anderson, MD Observed Value Normal RangeHematocrit 59 4054 mL/dLHemoglobin 15 13.018.0 g/dLSedimentation Automated Wintrobe 6 0-5 mm/hrWhat CPT code is assigned for the hemoglobin level?Question 2 options:A)84588B) 85018C)85045D) 85025Question 3 The Subsection Information paragraph in the Medicine Guidelines contains a listing of those special subsections within the medicine section that haveQuestion 3 options:A) primary procedure notes.B) complex procedures.C) special instructions.D) inconsistent instructions.Question 4 All _______ tissue is pathologically examined.Question 4 options:A) debridedB) drainedC) shavedD) excisedQuestion 5 Which supply code is referenced in the Supplied Materials in the Medicine Guidelines?Question 5 options:A) 99000B) 93799C) A5430D) 99070Question 6 Chemotherapy CPT codes representQuestion 6 options:A) preparation and administration.B) preparation only.C) administration only.D) the specific drug(s) used.Question 7 (5 points) Which of the following is the term for a donor graft?Question 7 options:A) MircograftB) AutograftC) XenograftD) AllograftQuestion 8 (5 points) Read the following chart note and assign the correct CPT and HCPCS codes.Location: Outpatient clinicPatient: Connor LunderquistPhysician: Alma Naraquist, MDTherapeutic infusion of saline solution with 5% dextrose IV, 500 mL for dehydration, lasting 148 minutes.Which CPT and HCPCS codes are assigned?Question 8 options:A) J7042, 96360 x 2B) 96350, 96361, 96362C) 96361, J4042, 96360D) 96360, 96361, J7042Question 9 (5 points) According to the Surgery Guidelines, _______ anesthesia service is not included in the surgical package.Question 9 options:A) digital blockB) localC) local infiltrationD) generalQuestion 10 (5 points) _______ codes group several laboratory services into one code and can be reported only if all the tests in the grouped code have been provided.Question 10 options:A) PanelB) SequenceC) Repeated testD) Timed testQuestion 11 (5 points) Moderate sedation codes are based on theQuestion 11 options:A) agent administered.B) patient's gender.C) patient's age.D) patient's age and reason for sedation.Question 12_______ of lesions don't require suture closure.Question 12 options:A) RemovalB) ParingC) ShavingD) Biopsy Write a essay describing something that you worked hard.Write how difficult it was to stay focused,but also how rewarding it was when you achieved your goal The allowable increase for a constraint is Group of answer choices how much resource to use to get the optimal solution. the amount by which the resource can increase given shadow price. how many more units of resource to purchase to maximize profits. the amount by which the constraint coefficient can increase without changing the final optimal value. A stamp gets more expensive each year. It increases in value by 60 % each year. Whais the growth FACTOR? find the volume of the cylinder. SHOW ALL WORK