Body-mass index is a measurement of how a person's weight and height compare. A person's body-mass index is given by B(h, w) = 697.5wh-2 points where h is the height in inches and w is the weight in pounds write the cross-sectional model B(71,w) by completing the following sentence. round the coefficient to six decimal places.
B(71,w) = ___ gives a 71 inch person's body mass index when w is their weight in pound w ≥0

The answer of the given question based on the graph is the value of 'a' affects the graph by determining the steepness of the curve.

Slope is a measure of the steepness of a line or a curve. It is defined as  ratio of vertical change (rise) between two points to  horizontal change (run) between  same two points. The slope of a line is constant, while the slope of a curve may change from point to point.

In the equation y = ab(x-h)+k, the value of 'a' affects the graph by determining the steepness of the curve.

If 'a' is positive, the graph will slope upwards as 'x' increases. The larger the value of 'a', the steeper the slope of the curve will be. On the other hand, if 'a' is negative, the graph will slope downwards as 'x' increases. Again, the larger the absolute value of 'a', the steeper the slope of the curve will be.

In general, the value of 'a' controls the vertical scaling of the curve, while the value of 'b' controls the horizontal scaling, and 'h' and 'k' control the horizontal and vertical translations of the curve, respectively. Changing the value of 'a' will stretch or compress the curve vertically, but will not affect the position of the curve on the x-axis.

To know more about Absolute value visit:

https://brainly.com/question/10657665

#SPJ1

When a regression model has an interaction term and a dummy variable in statistics and probability, there will be more than one slope and more than one intercept (D)

When there is an interaction term and a dummy variable in a regression model, we can have more than one slope and more than one intercept. The interaction term allows for different slopes for different levels of the dummy variable, while the intercepts represent the expected value of the dependent variable when the dummy variable is equal to zero for each level of the interaction term.

When a regression model has an interaction term and a dummy variable, it means that the effect of one independent variable on the dependent variable varies depending on the value of the other independent variable. In other words, the slope and intercept of the regression line will change depending on the value of the dummy variable.

More specifically, the model will have one intercept and two slopes: one for the dummy variable and one for the interaction term. As a result, the relationship between the dependent variable and the independent variables will vary depending on the value of the dummy variable, which will result in different slopes and intercepts.

Therefore, the correct answer is (d): more than one slope and more than one intercept.

Learn more about statistics and probability here:

https://brainly.com/question/30448884

#SPJ11

The particular solution is [tex]3x^(-1) - 1/27 + 3(9)^(-2)[/tex] based on integration.

To find a particular solution to given equatio we need to integrate twice. First, we integrate with respect to x to get [tex]-3x^(-2)[/tex].

Then, we integrate again with respect to x to get 3x^(-1) + C1, where C1 is a constant of integration.

Next, we use the initial condition 6′ 9 to solve for C1. Taking the derivative of [tex]3x^(-1) + C1[/tex], we get [tex]-3x^(-2)[/tex]. Plugging in x = 9, we get [tex]-3(9)^(-2) = -1/27[/tex].

Therefore, [tex]-1/27 = -3(9)^(-2) + C1[/tex], and solving for C1, we get[tex]C1 = -1/27 + 3(9)^(-2)[/tex].

Thus, the particular solution is [tex]3x^(-1) - 1/27 + 3(9)^(-2)[/tex].
Hi! It seems there might be a typo in your question, making it difficult to understand the exact problem you need help with. However, I will try to address the terms "solution" and "particular."

A "solution" refers to the result or answer obtained when solving an equation, problem, or system of equations. It is the value or values that satisfy the given conditions or equations.

A "particular solution" is a specific instance of a solution, usually when there are multiple solutions or when dealing with differential equations. It is a single example of a valid answer that meets the given criteria.

If you can provide more clarification on your question, I would be happy to help you find the particular solution you're looking for!

Learn more about solution here:

https://brainly.com/question/15127193

#SPJ11

Answer:

Step-by-step explanation:

You want the translation that maps f(x) = x² to g(x) = x² -6x +6.

A graph of the two functions shows g(x) is right 3 units and down 3 units from f(x).

We know the vertex of f(x) = x² is the origin (0, 0). The vertex of g(x) will tell us the translation. Putting that function in vertex form, we have ...

  g(x) = x² -6x +6

  g(x) = (x² -6x) +6

  g(x) = (x² -6x +9) +6 -9 . . . . . add and subtract 9 to complete the square

  g(x) = (x -3)² -3

Compare this to ...

  y = (x -h)² +k . . . . . . has vertex (h, k)

We see that (h, k) = (3, -3).

g(x) is translated right 3 units and down 3 units.

Kathy runs at a speed of 2 mph, and Dennis rides his bike at a speed of 7 mph.

To find the speed that Kathy is running and that Dennis is riding, the first relationship is:

K = D - 5

Then use the formula for time:

Time for Kathy = Time for Dennis

4 mi / K = 14 mi / D

4 mi / (D - 5) = 14 mi / D

4D = 14(D - 5)

4D = 14D - 70

-10D = -70

D = 7 mph

Then we can find Kathy's speed :

K = 7 - 5

K = 2 mph

Find out more on speed at https://brainly.com/question/4931057

#SPJ1

By using the Concept of Permutations,There are 59,280 different ways to choose the president, vice president, and secretary from a class of 40 students.

To determine the number of different ways people can be chosen as president, vice president, and secretary from a class of 40 students:

You can use the concept of permutations.

Step 1: Choose the president. There are 40 students in the class, so there are 40 choices for the president position.

Step 2: Choose the vice president. Since the president has been chosen, there are now 39 remaining students to choose from for the vice president position.

Step 3: Choose the secretary. After selecting the president and vice president, there are 38 remaining students to choose from for the secretary position.

Now, multiply the number of choices for each position:

40 (president) x 39 (vice president) x 38 (secretary) = 59,280 different ways to choose the president, vice president, and secretary from a class of 40 students.

To know more about Concept of Permutations:

https://brainly.com/question/30649574

#SPJ11

The values for x(1) and x(-1) are both 0.

To find the values of x(1) and x(-1) given that x(t) = 2·tri(t/4)*δ(t – 2), we will evaluate the function at these points.

a. x(1):
To find the value of x(1), we need to substitute t = 1 into the function:
x(1) = 2·tri(1/4)*δ(1 - 2)

Since δ(1 - 2) is the Dirac delta function at a point different from zero (specifically, -1), its value is 0.

Therefore,
x(1) = 2·tri(1/4) * 0 = 0

b. x(-1):
To find the value of x(-1), we need to substitute t = -1 into the function:
x(-1) = 2·tri(-1/4)*δ(-1 - 2)

Again, since δ(-1 - 2) is the Dirac delta function at a point different from zero (specifically, -3), its value is 0.

Therefore,
x(-1) = 2·tri(-1/4) * 0 = 0

Learn more about Dirac delta function:

https://brainly.com/question/30917153

#SPJ11

The current through R2 will depend on the values of the components in the circuit and the initial current through the inductor. Without more information, it is not possible to determine the current through R2.

After the switch is open, the current through the inductor will continue to flow in the same direction but will gradually decrease over time. The current through R2 will depend on the values of the components in the circuit and the initial current through the inductor. Without more information, it is not possible to determine the current through R2.
We want to know the current through resistor R2 immediately after the switch is opened, given that the current through the inductor is 20.4 mA. To provide an accurate answer, I would need more information about the circuit, such as the values of the resistors, inductor, and any voltage sources. However, I will explain the concept behind the problem.
When the switch is opened after being closed for a long time, the inductor behaves like a current source due to its stored energy. Since the current through the inductor is given as 20.4 mA, the current flowing through R2 will be the same (20.4 mA) immediately after the switch is opened, assuming there are no other current paths in the circuit.

To learn more about values, click here:

brainly.com/question/24503916

#SPJ11

The answer is: Test the series for convergence or divergence. [infinity] Σ (-1)n+1/3n² - converges.

To test the series Σ (-1)n+1/3n² for convergence or divergence, we can use the alternating series test. This test states that if a series alternates in sign and the absolute value of its terms decreases monotonically to zero, then the series converges.

In this case, the series Σ (-1)n+1/3n² alternates in sign and the absolute value of its terms is given by 1/3n², which decreases monotonically to zero as n increases. Therefore, we can apply the alternating series test and conclude that the series converges.

Know more about convergence here;

https://brainly.com/question/15415793

#SPJ11

$5744 is Ashley’s monthly payment.

The amount of the down payment made by Ashlee is 15% of $875,000, which is:

Down payment = 0.15 x $875,000 = $131,250

The amount that Ashlee took out on a mortgage is:

Mortgage amount = Purchase price - Down payment

= $875,000 - $131,250

= $743,750

The monthly payment on a mortgage:

[tex]M = P [ i(1 + i)^n ] / [ (1 + i)^n - 1 ][/tex]

where:

M = monthly payment

P = principal amount (mortgage amount)

i = monthly interest rate (annual interest rate / 12)

n = total number of monthly payments (amortization period x 12)

In this case, the annual interest rate is 6.95% and the term is for 5 years, so we need to first calculate the monthly interest rate and the total number of monthly payments.

Monthly interest rate = 6.95% / 12 = 0.57917%

Total number of monthly payments = 20 years x 12 = 240

Substituting these values into the formula, we get:

M = $743,750 [ 0.0057917 (1 + 0.0057917)^240 ] / [ (1 + 0.0057917)^240 - 1 ]

= $5744.002

Therefore, Ashley's monthly payment on the mortgage is $5744.

Learn more about compound interest here:

https://brainly.com/question/29335425

#SPJ1

The market rate of substitution between good x and y is represented by the ratio of their prices, which is px/py. Therefore, in this case, the market rate of substitution is 20/5 = 4. However, this answer choice is not listed. The closest answer choice is b. -4, which is the negative inverse of the market rate of substitution (-1/4).
The market rate of substitution between good X and Y is represented by the marginal rate of substitution (MRS), which is the ratio of the marginal utilities of both goods. In this case, we are given income (I) = 500, the price of good X (Px) = 20, and the price of good Y (Py) = 5.

To find the MRS, we can use the formula:

MRS = - (Px / Py)

Plugging in the values, we get:

MRS = - (20 / 5)

MRS = -4

So, the market rate of substitution between good X and Y is -4 (option b).

Visit here to learn more about income brainly.com/question/17961582

#SPJ11

Using the graph, we can find the following:

a) The gymnast stays 4 seconds in the air.

b) The maximum height that the gymnast reaches is 10 ft.

c) After 2 seconds the gymnast starts to descend.

d) The quadratic function that models this situation is:

y = mx + c

Quantitative data can be represented and analysed graphically. In a graph, variables representing data are drawn over a coordinate plane. Analysing the magnitude of one variable's change in light of other variables' changes became simple.

Here in the question,

a. We can see from the graph that the curve above x-axis starts from the origin (0,0) and ends at (4,0) on the x-axis.

So, the gymnast stays 4 seconds in the air.

b. As we can see from the graph that it rises and then at point (2,10) it starts to descend.

So, the maximum height that the gymnast reaches is 10 ft.

c. As we can see from the graph that it rises and then at point (2,10) it starts to descend.

So, after 2 seconds the gymnast starts to descend.

d. The quadratic function that models this situation is:

y = mx + c

To know more about graphs, visit:

https://brainly.com/question/17267403

#SPJ1

The GLB of the set {x : |x - 4| < 1}  is option (d) 3

The set {x : |x - 4| < 1} can be written as the open interval (3, 5), which contains all values of x that satisfy the inequality |x - 4| < 1.

The greatest lower bound (GLB), also known as the infimum, is a concept in mathematics that applies to sets of numbers or other mathematical objects that are partially ordered.

To find the GLB (greatest lower bound) of this interval, we need to look for the greatest value that is less than or equal to every element in the interval.

Since the interval contains all real numbers greater than 3 and less than 5, its GLB is 3. Therefore, the answer is option (d) 3.

Learn more about greatest lower bound here

brainly.com/question/30430081

#SPJ4

The distribution is skewed left and leptokurtic is the correct shape of distribution. The correct answer is option B.

For more such question on distribution

https://brainly.com/question/30049535

#SPJ11

Answer:

Step-by-step explanation:

...... The problem is glitched re send the image/

Answer:245/36 π

Step-by-step explanation: you do 50/360 times π(7)^2

The percent of tools should be produced by factories B and C so that a tool picked at random in the market will have a probability of being non defective equal to 96% = 0.96 are 5% and 95% respectively.

We have three factories produce the same tool and supply it to the market. Let's consider three events defined as, A = event for tools produced by factory A

B = event for tools produced by factory B

C = event for tools produced by factory C and N be the count that tools produced by all factories is not defective.

The probability that the tools produced by factory A for the market, P( A) = 30%

= 0.30

The probability that the tools produced by factories B and C for the market, P( B and C) = 70% = 0.70

The Probability that tools are non- defective and that are produced in factory A, P( N/A) = 98%

= 0.98

The Probability that tools are non- defective and that are produced in factory B, P( N/B) = 95%

= 0.95

The Probability that tools are non- defective and that are produced in factory C, P( N/C) = 97% = 0.97

Now, since only three factories supply to the whole market, then by probability law, P(A) + P(B) + P( C) = 1

=> 0.3 + P(B) + P( C) = 1

=> P(B) = 0.7 - P(C) --(1)

We have to determine percent of tools should be produced by factories B and C that is P(C) and P(B) when probability of non defective, P(N) is 96% = 0.96. From the law of total probability law, P(N) is written by, P( N) = P( N/A) P(A) + P( N/B) P(B) + P( N/C) P( C)

=> 0.96 = 0.98 × 0.3 + 0.95 × ( 0.7 - P(C) ) + 0.97 × P(C)

=> 0.96 = 0.98 × 0.3 + 0.95 × 0.7 - 0.95 P(C) + 0.97 × P(C)

=> 0.96 = 0.98 × 0.3 + 0.95 × 0.7 - 0.95 P(C) + 0.97 × P(C)

=> 0.96 = 0.294 + 0.665 + 0.02 × P(C)

=> 0.96 = 0.959 + 0.02 × P(C)

=> 0.02 × P(C) = 0.96 - 0.959

=> 0.02 × P(C) = 0.001

=> P(C) = 0.05 = 5%

from equation (1), P(B) = 1 - P(C)

=> P( B) = 1 - 0.05 = 0.95

Hence, required percentage is 95%.

For more information about probability, refer:

https://brainly.com/question/25870256

#SPJ4

The value of the angle is 34 degrees

To determine the value of the variable, we need to the following;

From the information given, we have that the angles are;

73 degrees

73 degrees

x degrees

Equate the angles

73 + 73 +x = 180

collect the like terms

x = 180 - 146

subtract the values

x = 34 degrees

Learn more about angles at: https://brainly.com/question/25716982

#SPJ1

The number of boxes that can fit into the crate is 7 boxes.

A cuboid has a hexahedron six-faced solid shape and the volume is determined by multiplying the length by width by height. Here; the volume of the crate is determined by finding the volume of the cuboid.

Volume of the cuboid is: 2.4 m × 1.8 m × 1.1 m

Volume of the cuboid  = 4.752 m³

To cm, volume of the cuboid  = 475.2 cm³

Now, since the cube has a length of 60 cm, then the number of boxes that will fit into the crate can be estimated by dividing the volume of the cuboid shape by the length of the cube.

Thus, the number of boxes that can fit into the crate is:

= 475.2 cm/ 60 cm

= 7. 92

Learn more about finding the volume of the cuboid here:

https://brainly.com/question/46030

#SPJ1

The solution of the differential equation dx/dt = sin(t²)×t with the initial condition x(0) = 20 is [tex]x(t) = 20 + \int_{0}^{t}tsin(t^2) dt[/tex].

In mathematics, a differential equation is an equation that relates one or more unknown functions and their derivatives. In applications, the functions generally represent physical quantities, the derivatives represent their rates of change, and the differential equation defines a relationship between the two.

To solve the given differential equation dx/dt = sin(t²)×t with the initial condition x(0) = 20 and leaving the answer as a definite integral, follow these steps:

1. Identify the given differential equation:

dx/dt = sin(t²)×t.

2. Recognize the initial condition:

x(0) = 20.

3. Integrate both sides of the equation with respect to t:

∫dx = ∫sin(t²)×t dt.

4. Apply the initial condition to determine the constant of integration:

x(0) = 20.

5. Write the final solution:

[tex]x(t) = 20 + \int_{0}^{t}tsin(t^2) dt[/tex].

So, the solution is [tex]x(t) = 20 + \int_{0}^{t}tsin(t^2) dt[/tex].

Learn more about a differential equation:

https://brainly.com/question/1164377

#SPJ11

Answer:

s = 5[tex]\sqrt{6}[/tex]

Step-by-step explanation:

using the cosine ratio in the right triangle and the exact value

cos30° = [tex]\frac{\sqrt{3} }{2}[/tex] , then

cos30° = [tex]\frac{adjacent}{hypotenuse}[/tex] = [tex]\frac{s}{10\sqrt{2} }[/tex] = [tex]\frac{\sqrt{3} }{2}[/tex] ( cross- multiply )

2s = 10[tex]\sqrt{2}[/tex] × [tex]\sqrt{3}[/tex] = 10[tex]\sqrt{6}[/tex] ( divide both sides by 2 )

s = 5[tex]\sqrt{6}[/tex]

Completing the inductive step and identifying where the inductive hypothesis is used, the correct multiple choice answer is: Replacing the quantity in brackets on the left-hand side of part (c) by what it equals by virtue of the Inductive hypothesis, we have (kok+") + (x + 1)² = (x + 1)² +68+4)* (+1)(x+2) as desired.

In an induction proof, the inductive step involves assuming a statement is true for some arbitrary value, say k, and then proving it's true for the next value, k+1.

Here, the inductive hypothesis corresponds to the term (kok+"). By replacing this term on the left-hand side of part (c) with its equivalent based on the inductive hypothesis, we can show that the equation holds for the (k+1) case as well. This is crucial for proving the statement using induction, as it establishes the necessary pattern for all cases.

To know more about inductive hypothesis click on below link:

https://brainly.com/question/31099433#

#SPJ11

The values for the sums are: a) 20, b) 11, c) 30, and d) -430.

Here are the values for each:

a) ∑_(k=1)^5 (k+1) = (1+1) + (2+1) + (3+1) + (4+1) + (5+1) = 2 + 3 + 4 + 5 + 6 = 20

b) ∑_(j=0)^4 (-2)^j = (-2)^0 + (-2)^1 + (-2)^2 + (-2)^3 + (-2)^4 = 1 - 2 + 4 - 8 + 16 = 11

c) ∑_(i=1)^10 3 = 3 + 3 + 3 + 3 + 3 + 3 + 3 + 3 + 3 + 3 = 30 (since there are 10 terms, each with a value of 3)

d) ∑_(j=0)^8 (2j+1 - 2^j) = ∑_(j=0)^8 (2j+1) - ∑_(j=0)^8 (2^j)
First, find the two separate sums:
∑_(j=0)^8 (2j+1) = 1 + 3 + 5 + 7 + 9 + 11 + 13 + 15 + 17 = 81
∑_(j=0)^8 (2^j) = 1 + 2 + 4 + 8 + 16 + 32 + 64 + 128 + 256 = 511
Now subtract the two sums: 81 - 511 = -430

Learn more about mathematical operations here: brainly.com/question/20628271

#SPJ11

Make the amount of money they have £100 because this makes the question easier.

Colin gets 3/10 of the money, so Colin will get £30.

After Colin has taken his share £70 will be left over.

The ratio give is 3 : 2. So 3 + 2 is equal to 5.

The amount of money left over is then divided by the ratio added in this case its 70/5.

70/5 gives us an answer of 14 .

This means that each share is equal to £14.

Emma gets the ratio of 3 so we do 3 x 14 which gives us he answer of  £42.

And if we do 3 x 2 we get the answer of £28.

We then know Dave gets £26 pounds from the £100 at the start.

26/100 converted to a percentage is 26%.

The general solution of the given differential equation is expressed in terms of Bessel functions as y(x) = c1 J₀(x) + c2 Y₀(x) - c3 J₁(x) + c4 Y₁(x), where J and Y are Bessel functions of the first and second kind, respectively, and c1, c2, c3, and c4 are constants.

To express the general solution in terms of Bessel functions, we first need to determine the characteristic equation of the given differential equation. We assume the solution has the form y(x) = x^r, then differentiate twice to get

y'(x) = rx^(r-1)

y''(x) = r(r-1)x^(r-2)

Substituting these expressions into the given differential equation, we get

x^2y''+4xy'+(x^2+2)y = x^2[r(r-1)x^(r-2)] + 4x[rx^(r-1)] + (x^2+2)x^r = 0

Dividing through by x^2, we get

r(r-1) + 4r + (1+2/x^2) = 0

Simplifying and multiplying by x^2, we get the Bessel equation

x^2y'' + xy' + (x^2 - 1)y = 0

The general solution to this differential equation can be expressed in terms of Bessel functions of the first kind, Jv(x), and second kind, Yv(x), as follows

y(x) = c1J0(x) + c2Y0(x)

where c1 and c2 are constants of integration. Therefore, the general solution to the original differential equation can be expressed as

y(x) = c1J0(x) + c2Y0(x) + c3J1(x) + c4Y1(x)

where c3 and c4 are constants of integration determined by the initial conditions.

To know more about Bessel functions:

https://brainly.com/question/17248309

#SPJ4

The volume of the cone B using scale factor k = 3/2 is equal to 54π cubic centimeters.

Volume of cone A = 16π cubic centimeters

Scale factor 'k' = 3/2

Two solids A and B are similar.

This implies ,all corresponding lengths in solid B are 3/2 times the lengths in solid A.

The volume of a cone is given by the formula

V = (1/3)πr²h,

where r is the radius and h is the height.

Volume of cone A is 16π cubic centimeters.

Let r₁ and h₁ be the radius and height of cone A and r₂ and h₂ of cone B.

⇒16π = (1/3)π(r₁²)(h₁)

Multiplying both sides by 3 and dividing by π, we get,

⇒48 =(r₁²)(h₁)

Since solid A and B are similar with a scale factor of 3/2, we have,

h₂ = (3/2)h₁ and r₂= (3/2)r₁

Using these relationships, the volume of cone B is,

Volume of cone B = (1/3)π(r₂²)(h₂)

Volume of cone B = (1/3)π[(3/2)r₁]²[(3/2)h₁]

Volume of cone B = (1/3)π(9/4)(r₁²)(3/2)(h₁)

Volume of cone B = (27/8)(1/3)π(r₁²)(h₁)

Substituting Volume of cone A = 16π, we get,

Volume of cone B = (27/8)(16π)

Volume of cone B = 54π

Therefore, the volume of cone B is 54π cubic centimeters.

learn more about volume here

brainly.com/question/13543318

#SPJ1

Answer:

78.65

Step-by-step explanation:

Answer:

{-1, 0, 1, 2, 3}

Step-by-step explanation:

. 2-6y<14

-6y < 12

y > 12/-6

y > -2.

1<21-5y

-5y > -20

y < 4.

So -2 < y < 4

and the solution set of integers is

{-1, 0, 1, 2, 3}

To convert the integral to cylindrical coordinates, we use the following conversions:

x = r cos(theta)

y = r sin(theta)

z = z

And we also replace dV with r dz dr d(theta).

The limits of integration are:

0 ≤ r ≤ 2 (since the bounds on x and y are from 0 to 2)

0 ≤ theta ≤ 2pi (since we integrate over the entire circle)

0 ≤ z ≤ 16 - r^2 (since the bounds on z are from 0 to 16 - x^2 - y^2, which in cylindrical coordinates is 16 - r^2)

Thus, the integral becomes:

∫^(2pi)_0 ∫^2_0 ∫^(16-r^2)_0 r dz dr d(theta)

Integrating with respect to z, we get:

∫^(2pi)_0 ∫^2_0 (16 - r^2)r dr d(theta)

Integrating with respect to r, we get:

∫^(2pi)_0 [8r^2 - (1/3)r^4]∣_0^2 d(theta)

= ∫^(2pi)_0 (32/3) d(theta)

= (32/3) ∫^(2pi)_0 d(theta)

= (32/3)(2pi)

= (64/3)pi

Therefore, the value of the iterated integral in cylindrical coordinates is (64/3)pi.

The inflection point of the polynomial p(x) = [tex]x^5/20[/tex] is at x = 0. This is the only one inflection point.

To find the x-coordinates of the inflection points for the polynomial p(x) = [tex]x^5/20[/tex], we'll need to follow these steps:

1. Find the first derivative, p'(x), to determine the slope of the function.
2. Find the second derivative, p''(x), to determine the concavity of the function.
3. Set p''(x) equal to zero and solve for x to find the inflection points.

Step 1: Find the first derivative, p'(x):
p'(x) = [tex]d(x^5/20)/dx = (5x^4)/20 = x^4/4[/tex]

Step 2: Find the second derivative, p''(x):
p''(x) = [tex]d(x^4/4)/dx = (4x^3)/4 = x^3[/tex]

Step 3: Set p''(x) equal to zero and solve for x:
[tex]x^3[/tex] = 0
x = 0

There is only one inflection point, and its x-coordinate is 0.

For more such questions on Inflection points.

https://brainly.com/question/31484498#

#SPJ11