briefly explain Five ways in which the influence of sport and games can lead to nation building and national unity
Answer:
Is that your answer
when economist determine that a nations GDP has declined, they can point to this as a sign of what?
Which of the following is not a tool used in engineering and technology?
A - computer design program
B - electron microscope
C - suspension bridge
D - power drill
Tech A says wire size is very important. Tech B says there are two scales used to measure wire size. Who is correct?
Answer:
teach b says there are two scales used to measure wire size
Explanation:
Answer:
b
Explanation:
If you could drive one car for the rest of your life what would it be? Type in comments if you want to answer. Mine is either a 1984 ford bronco or a 1970 dodge challenger. I am a fan of old cars.
Answer:
the kind of car I want to ride for the rest of my life is Lamborghini.
Explanation:
what is good engineering
Answer:
A good engineerer will look like this...
An engineer must know how the system works, what can go wrong and how to fix it. This requires an ability to think logically, and evaluate and understand each element that makes it up. Successful engineers are naturally curious and always looking for ways to make things better
Explanation:
Hope this helps!
Have a great day!
Brainlest is apprecited!
why it is important to prepare first the materials and tools carpentry before doing the tasks?
Answer:
It is important to inspect and check materials and tools for defects and damage before receiving them so that you can ask for replacements for those that you found .
Explanation:
The materials and tools carpentry should be prepared before doing tasks so as to seek for replacement incase of a defect.
What are Tools?Tools serves as the working implements that are been used in carrying out specific task especially in engineering.
Therefore, it is essential to check the tools and their working condition before one commence work for the day.
learn more about Tools at;
https://brainly.com/question/9145476
#SPJ2
there do u know it.............
What is the root of a fillet weld
Answer:
There are 5 pieces to each fillet weld known as the root, toe, face, leg and throat. The root of the weld is the part of deepest penetration which is the opposite angle of the hypotenuse.
Charles, Clarissa, and Francine all work in Manufacturing. The table shows the breakdown of one day for each employee.
Charles
Clarissa
Francine
9:00 a.m.–11:00 a.m.
meeting with production team and first-line supervisor of production
11:00 a.m.–12:00 p.m.
meeting with finance team
1:00 p.m.–2:00 p.m.
meeting with materials engineer for new project
2:00 p.m.–5:00 p.m.
e-mails and reports
6:00 a.m.–7:00 a.m.
review lists of damaged equipment
8:00 a.m.–11:00 a.m.
fix damaged machines in the hospital laboratory
12:00 p.m.–2:00 p.m.
fix damaged machines on the hospital floor
8:00 a.m.–9:00 a.m.
decide on which products need assessment
9:00 a.m.–12:00 p.m.
test products on factory floor against standards
1:00 p.m.–4:00 p.m.
write reports and recommendations on tested products
Which correctly identifies the career of each person?
A.)Charles is a First Line Supervisor of Production, Clarissa is an Industrial Machinery Mechanic, and Francine is a Product Safety Engineer.
B.)Charles is a Product Safety Engineer, Clarissa is a First Line Supervisor of Production, and Francine is an Industrial Machinery Mechanic.
C.)Charles is an Industrial Production Manager, Clarissa is a Medical Equipment repairer, and Francine is a Quality Control Analyst.
D.)Charles is a Quality Control Analyst, Clarissa is an Industrial Production Manager, and Francine is a Medical Equipment Repairer.
Answer:
C.)Charles is an Industrial Production Manager, Clarissa is a Medical Equipment repairer, and Francine is a Quality Control Analyst.
Explanation:
I WILL GIVE BRAINLEIST!! What are some challenges did Sunita williams (astronaut) faced throughout her life and career?
How might an operations manager alter operations to meet customer demand? Name at least two ways.
Will give 50 points!!!
Define Electromechanical systems.
Electromechanical systems convert blank input into a blank output.
Answer:
Electromechanical systems or devices are systems or devices that involves the interaction between electrical systems and mechanical systems in which the motion of mechanical parts is converted to electrical energy or made to interact with energy or in which electrical energy is converted to mechanical energy or interacts with a moving mechanical system
Therefore;
Electromechanical systems convert electrical energy input into a mechanical energy output
Explanation:
if im 14 and your 14 what does that equal
Answer:
hmmmmmmmmmmmmmmmmmmmmmmm
Explanation:
hey jase , how u doing???
name the famous engineer in the world
Answer:
Nikola Tesla
Explanation:
Answer: Nikola Tesla. Arguably at the top of the list of greatest engineers is Nikola Tesla. He was Serbian, and moved to America at the age of 28 to work with Thomas Edison.
Explanation:
A power cycle operates between hot and cold reservoirs at 600 K and 300 K, respectively. At steady state the cycle develops a power output of 0.45 MW while receiving energy by heat transfer from the hot reservoir at the rate of 1 MW. a. Determine the thermal efficiency and the rate at which energy is rejected by heat transfer to the cold reservoir, in MW. b. Compare the results of part (a) with those of a reversible power cycle operating between these reservoirs and receiving the same rate of heat transfer from the hot reservoir
Answer:
a. The thermal efficiency of the actual cycle is 45%
ii) The rate at which energy is rejected by heat transfer to the cold reservoir is 0.55 MW
b. The (maximum) cycle efficiency, is 50%
The rate of energy rejection to the cold reservoir by heat transfer is 0.55 MW
Therefore, there is an increased efficiency and reduced heat rejection in the reversible power cycle working between the given two reservoirs
Explanation:
The given parameters are;
The temperature of the hot reservoir, [tex]T_H[/tex] = 600 K
The temperature of the hot reservoir, [tex]T_C[/tex] = 300 K
The power output, [tex]\dot W[/tex] = 0.45 MW = The cycle work per second
The heat input from the hot reservoir, [tex]\dot Q_{in}[/tex] = 1 MW
a. The thermal efficiency of the actual cycle is given by the work done divided by the heat supplied as follows;
[tex]\eta_{actual} = \dfrac{\dot W}{\dot Q_{in}}[/tex]
Therefore, we have;
[tex]\eta_{actual} = \dfrac{0.45 \ MW}{1 \ MW} = 0.45 = 45 \%[/tex]
The thermal efficiency of the actual cycle, [tex]\eta_{actual}[/tex] = 45%
ii) The rate at which energy is rejected by heat transfer to the cold reservoir, [tex]\dot Q_{c}[/tex], is given as follows;
[tex]\dot Q_{in}[/tex] = [tex]\dot Q_{c}[/tex] + [tex]\dot W[/tex]
∴ [tex]\dot Q_{c}[/tex] = [tex]\dot Q_{in}[/tex] - [tex]\dot W[/tex]
Therefore, we have;
[tex]\dot Q_{c}[/tex] = 1 MW - 0.45 MW = 0.55 MW
The rate at which energy is rejected by heat transfer to the cold reservoir, [tex]\dot Q_{c}[/tex] = 0.55 MW
b. For a reversible power cycle, we have the maximum cycle efficiency, [tex]\eta_{maximum}[/tex], given as follows;
[tex]\eta_{maximum} = \dfrac{T_H - T_C}{T_H}[/tex]
[tex]\therefore \eta_{maximum} = \dfrac{600 \, K - 300 \, K}{600 \, K} = 0.5 = 50\%[/tex]
The maximum cycle efficiency, [tex]\eta_{maximum}[/tex] = 50%
The rate of work done by the cycle, [tex]\dot W[/tex], is therefore give as follows;
[tex]\eta_{maximum} = \dfrac{\dot W}{\dot Q_{in}}[/tex]
Therefore;
[tex]\dot Q_{in}[/tex] × [tex]\eta_{maximum}[/tex] = [tex]\dot W[/tex]
1 MW × 50% = 0.5 MW = [tex]\dot W[/tex]
[tex]\dot W[/tex] = 0.5 MW
[tex]\dot Q_{c}[/tex] = [tex]\dot Q_{in}[/tex] - [tex]\dot W[/tex]
∴ [tex]\dot Q_{c}[/tex] = 1 MW - 0.5MW = 0.5MW
[tex]\dot Q_{c}[/tex] = 0.5MW
The rate of energy rejection to the cold reservoir by heat transfer, [tex]\dot Q_{c}[/tex] = 0.55 MW
Therefore the frequency and the rate at which energy is rejected by heat transfer to the cold reservoir are both higher for the reversible power cycle
While discussing the testing of a Hall-effect switch:
Technician A says that the Hall-effect switch should read zero volts with the feeler gauge inserted between the hall layer and the magnet with battery voltage applied. Technician B says that the Hall-effect switch can only be tested with a scan tool. Who is correct?
Answer:
your answer is technician A
Does anyone know how to fixes rope lights? Half of the rope is not on
Someone.. Anyone..
Answer:
Step 1 - Take Down the Rope Lights. You will first have to remove the rope lights from their position.
Step 2 - Assess the Damage. Remove the insulating material from around the edge of the broken part of the rope.
Step 3 - Solder the Wire.
Step 4 - Add Insulation.
Step 5 - Test Your Repair.
Explanation:
How is engine power expressed?
Answer: Engine power is the power that an engine can put out. It can be expressed in power units, most commonly kilowatt, pferdestärke (metric horsepower), or horsepower.
Explanation: (I hope this helped!! ^^)
What is the mass of a dragster body with a volume of 140 cm3 if it is made of balsa wood?
Answer:
The mass of the dragster body is 35 grams
Explanation:
The given volume of the dragster body, V = 140 cm³
The density of balsa wood = 250 kg/m³
We convert the units of the volume of the dragster body from cm³ to m³ as follows
1 cm = 0.01 m
∴ 1 cm³ = 1 cm × 1 cm × 1 cm = 0.01 m × 0.01 m × 0.01 m = 0.000001 m³
140 cm³ = 140 × 1 cm³ = 140 × 0.000001 m³ = 0.00014 m³
The volume of the dragster body, V = 140 cm³ = 0.00014 m³
Density, ρ = Mass, m/(Volume, V)
∴ Mass, m = ρ × V = 250 kg/m³ × 0.00014 m³ = 0.035 kg = 35 g
The mass of the dragster body, m = 35 grams
This Question: 1 pt
port
The type of respirator that has its own clean air supply is the
O A. full facepiece mask
O B. self-contained breathing apparatus
OC. mouthpiece with mechanical filter
O D. half mask
This is for a carpentry class
Answer:
c
Explanation:
it has its own mechanical filter making the air clean
Work out the Absolute X and Y Coordinates for the various positions to machine the contour X0 Y0 is at the lower left corner of the part Use a 0.5” diameter End Mill Tool #4 Start at X0 Y-.375 and machine the contour in a clockwise direction – climb milling Use X-.375 Y.125 as point 11
Answer:
I don't know.............
The what
includes all the social, physical, and
mental skills required for low-risk driving.
Answer:
id
Explanation:
How does a fashion designer fit within the gaming industry?
Pat spent 1 hour and 17 minutes playing baseball in the yard and 65 minutes playing soccer. How many more minutes did pat spend playing baseball then soccer?
Answer: Pat spent 12 more minutes playing baseball than soccer.
Explanation:
1 hour = 60 minutes
60 + 17 = 77
77 - 65 = 12
Which of the following is typically wom when working in an atmosphere containing dust?
A gas mask
B supplied air mask
C half mask
D scba
For a carpentry class
Answer:
Either D or C
Both of these masks are used for dust, but since half masks are generally cheaper and easier to use, I'd go with C.
If this is correct, I'd appreciate a brainliest.